Nie działa KDE
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Nie działa KDE
Mam Kubuntu 16.04 i po niechcacym odłączeniem zasilania nie działa Kde i włącza się Grub a jest tylko Kubuntu shell i kiedy wpisałem sh start init 5:
pierwsze polecenie:
Mount:mouting sysf on /sys failed:Device or resource busy
Mount:mounting proc on /proc failed:device or resource busy
Mount: mounting udev/dev failed:Device or resource busy
W:devtmpfs not avalbie,falling back to tmpsf for /dev Gave up waiting for root device. Common problems:
-Boot args(cat /proc/cmdline)
-Check rootdelay=(did the system wait long enough?)
Check root=(did the system wait for the right device?)
-Missing modules (cat/proc/modules/; ls /dev)
Alert! /dev/disk/by-uuid/49757747-c68d-4af1-a71a-895b2b998bda does not exist. Dropping to a shell!
Drugi Raz:
Pierwsze dwie linijjki takie same a potym:
MKdir:can't create directory
pierwsze polecenie:
Mount:mouting sysf on /sys failed:Device or resource busy
Mount:mounting proc on /proc failed:device or resource busy
Mount: mounting udev/dev failed:Device or resource busy
W:devtmpfs not avalbie,falling back to tmpsf for /dev Gave up waiting for root device. Common problems:
-Boot args(cat /proc/cmdline)
-Check rootdelay=(did the system wait long enough?)
Check root=(did the system wait for the right device?)
-Missing modules (cat/proc/modules/; ls /dev)
Alert! /dev/disk/by-uuid/49757747-c68d-4af1-a71a-895b2b998bda does not exist. Dropping to a shell!
Drugi Raz:
Pierwsze dwie linijjki takie same a potym:
MKdir:can't create directory
-
- Przebojowy Jelonek
- Posty: 1701
- Rejestracja: 01 mar 2008, 12:21
- Płeć: Mężczyzna
- Wersja Ubuntu: 16.04
- Środowisko graficzne: Unity
- Architektura: x86_64
- Kontakt:
Re: Nie działa KDE
Podaj wynik bootinfoscript.
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Kod: Zaznacz cały
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 97 for .
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 298,1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 617,056,255 617,054,208 83 Linux
/dev/sda2 617,058,302 625,141,759 8,083,458 5 Extended
/dev/sda5 617,058,304 625,141,759 8,083,456 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 49757747-c68d-4af1-a71a-895b2b998bda ext4
/dev/sda5 57a1b891-c678-488d-8461-7e0a2efb3620 swap
/dev/sr0 2015-04-22-13-12-20-00 iso9660 Kubuntu 15.04 i386
/dev/sr1 2011-06-29-09-00-00-00 iso9660 PLAY ONLINE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
#set_background_image "images/tile.png";
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
linux /boot/vmlinuz-4.4.0-22-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-22-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-49757747-c68d-4af1-a71a-895b2b998bda' {
menuentry 'Ubuntu, with Linux 4.4.0-22-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-22-generic-advanced-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.4.0-22-generic ...'
linux /boot/vmlinuz-4.4.0-22-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-22-generic-recovery-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.4.0-22-generic ...'
linux /boot/vmlinuz-4.4.0-22-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-22-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.4.0-21-generic ...'
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.4.0-21-generic ...'
linux /boot/vmlinuz-4.4.0-21-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.2.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-35-generic-advanced-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.2.0-35-generic ...'
linux /boot/vmlinuz-4.2.0-35-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.2.0-35-generic
}
menuentry 'Ubuntu, with Linux 4.2.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.2.0-35-generic-recovery-49757747-c68d-4af1-a71a-895b2b998bda' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
echo 'Loading Linux 4.2.0-35-generic ...'
linux /boot/vmlinuz-4.2.0-35-generic root=UUID=49757747-c68d-4af1-a71a-895b2b998bda ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.2.0-35-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 49757747-c68d-4af1-a71a-895b2b998bda
else
search --no-floppy --fs-uuid --set=root 49757747-c68d-4af1-a71a-895b2b998bda
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=49757747-c68d-4af1-a71a-895b2b998bda / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=57a1b891-c678-488d-8461-7e0a2efb3620 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
000001b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 58 7b 00 00 00 |...........X{...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-TORGbuDw/Tmp_Log: No such file or directory
No volume groups found
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Kod: Zaznacz cały
(initramfs) sudo mount /dev/sda1/mnt
/bin/sh:sudo:not found
(initramfs)mount /dev/sda1/mnt
mount:mounting /dev/sda1 on mnt failed:no such file or directory
(initramfs)mount --bind /dev/mnt/dev/
mount:can`t find /dev/mnt/dev in /etc/fstab
(initramfs)mount --bind /proc/mnt/proc
mount:can`t find /proc/mnt/proc in /etc/fstab
(initramfs)mount --bind /sys/mnt/sys
mount:can`t find /sys/mnt/sys in /etc/fstab
(initramfs)sudo chroot /mnt
/bin/sh:sudo:not found
(initramfs)chroot /mnt
chroot:can`t change change root directory to /mnt:No such file or directory
(initramfs)update-initramfs -u
/bin/sh/:update-initframs:not found
(initramfs)sh mount /dev/sda1/mnt
sh:can`t open mount
(initramfs)sh chroot /mnt
sh:can`t open chroot
(initramfs)sh update -initramfs -u
sh:can`t open update
(initramfs)update -grub
/bin/sh:update:not found
(initramfs)sh update -grub
sh:can`t open update
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Ostatnio napisałem takie polecenie:
kubuntu@kubuntu:~$ sudo fdisk -lu
Disk /dev/loop0: 1,2 GiB, 1291386880 bytes, 2522240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 298,1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x89c23f34
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 617056255 617054208 294,2G 83 Linux
/dev/sda2 617058302 625141759 8083458 3,9G 5 Extended
/dev/sda5 617058304 625141759 8083456 3,9G 82 Linux swap / Solaris
Partition 3 does not start on physical sector boundary.
kubuntu@kubuntu:~$ sudo fdisk -lu
Disk /dev/loop0: 1,2 GiB, 1291386880 bytes, 2522240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 298,1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x89c23f34
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 617056255 617054208 294,2G 83 Linux
/dev/sda2 617058302 625141759 8083458 3,9G 5 Extended
/dev/sda5 617058304 625141759 8083456 3,9G 82 Linux swap / Solaris
Partition 3 does not start on physical sector boundary.
-
- Przebojowy Jelonek
- Posty: 1701
- Rejestracja: 01 mar 2008, 12:21
- Płeć: Mężczyzna
- Wersja Ubuntu: 16.04
- Środowisko graficzne: Unity
- Architektura: x86_64
- Kontakt:
Re: Nie działa KDE
Nie wiem jakim cudem ale przegapiłem post z 11 czerwca.
Nie udało Ci się wykonać poleceń bo po pierwsze masz je wykonać z livecd a po drugie nie ma tam polecenia
tylkoZ pozostałymi jest podobnie.
Nie udało Ci się wykonać poleceń bo po pierwsze masz je wykonać z livecd a po drugie nie ma tam polecenia
Kod: Zaznacz cały
sudo mount /dev/sda1/mnt
Kod: Zaznacz cały
sudo mount /dev/sda1 /mnt
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Spróbowałem wszystko zadziałało oprócz próby restartu a potym znowu busybox,i powtórka po wpisaniu sh init 5. Może ma znaczenie że te polecenia wpisywałem z Kubuntu 15.04 LiveCD nie mam aktualnego livecd?
-
- Przebojowy Jelonek
- Posty: 1701
- Rejestracja: 01 mar 2008, 12:21
- Płeć: Mężczyzna
- Wersja Ubuntu: 16.04
- Środowisko graficzne: Unity
- Architektura: x86_64
- Kontakt:
Re: Nie działa KDE
Komunikaty są takie same jak w pierwszym poście czy inne?
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Są takie same.
-
- Przebojowy Jelonek
- Posty: 1701
- Rejestracja: 01 mar 2008, 12:21
- Płeć: Mężczyzna
- Wersja Ubuntu: 16.04
- Środowisko graficzne: Unity
- Architektura: x86_64
- Kontakt:
Re: Nie działa KDE
Zrób chroot do systemu i zainstaluj gruba w MBR: viewtopic.php?f=127&t=179803#p1012301
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Zrobiłem wszystko:
Zrobił się restart i później znowu busybox i wpisałem sh init 5 i znowu to samo,a drugi raz wpisałem sh init 5 to było:Pierwsze dwie linijjki takie same a potym:
MKdir:can't create directory i był ekran świecącego napisu Kubuntu było tak chwile po tym zwowu busybox.
Kod: Zaznacz cały
kubuntu@kubuntu:~$ sudo su
root@kubuntu:/home/kubuntu# mount /dev/sda1 /mnt
root@kubuntu:/home/kubuntu# mount --bind /dev /mnt/dev
root@kubuntu:/home/kubuntu# mount --bind /proc /mnt/proc
root@kubuntu:/home/kubuntu# chroot /mnt
root@kubuntu:/# grub-install /dev/sda
Instalowanie dla platformy i386-pc.
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
Instalacja zakończona. Nie zgłoszono błędów.
root@kubuntu:/# update-grub2
Tworzenie pliku konfiguracyjnego grub...
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
Uwaga: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no lo
nger supported.
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
Znaleziono obraz Linuksa: /boot/vmlinuz-4.4.0-22-generic
Znaleziono obraz initrd: /boot/initrd.img-4.4.0-22-generic
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
Znaleziono obraz Linuksa: /boot/vmlinuz-4.4.0-21-generic
Znaleziono obraz initrd: /boot/initrd.img-4.4.0-21-generic
Znaleziono obraz Linuksa: /boot/vmlinuz-4.2.0-35-generic
Znaleziono obraz initrd: /boot/initrd.img-4.2.0-35-generic
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
device node not found
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Cannot find list of partitions! (Try mounting /sys.)
gotowe
root@kubuntu:/# exit
exit
root@kubuntu:/home/kubuntu# umount /mnt/proc
root@kubuntu:/home/kubuntu# umount /mnt/dev
root@kubuntu:/home/kubuntu# umount /mnt
reboot
MKdir:can't create directory i był ekran świecącego napisu Kubuntu było tak chwile po tym zwowu busybox.
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Prawie nie mam wyjścia będe musiał nagrać LiveUSB Kubuntu 16.04 lub PClinuxOs lub Ubuntu 16.04 lub OpenMandrive.
-
- Piegowaty Guziec
- Posty: 14
- Rejestracja: 19 wrz 2013, 19:43
- Wersja Ubuntu: 12.10
- Środowisko graficzne: KDE Plasma
- Architektura: x86
Re: Nie działa KDE
Nie miałem wyjścia zainstalowałem czyste Kubuntu 16.04.
Kto jest online
Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 27 gości