zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Karty graficzne, dźwiękowe, tv, monitory etc.
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 02 lis 2017, 20:38

Witam,
Posiadam drukarkę Lexmark Prospekt Pro205. Pod tą drukarkę Lexmark w suporcie posiada sterowniki do wersji Ubuntu 12.04 włącznie. Uruchamiałem ją nawet pod Ubuntu 14.04 zarówno drukarkę jak i skaner.
Ostatnio przeszedłem na 16.04 i również próbowałem zainstalować tę drukarkę korzystając z tych dostępnych sterowników jak pod 14.04
I co tu ciekawego- bez problemu zadziałał skaner !!!!!! ale drukarka nie, niby sterowniki są zainstalowane ale przy próbie wydruku strony testowej pojawia się informacja od razu "rendering complet" a na drukarce nic się nie dzieje.
Gdzie przy 14.04 widać kolejne kroki kończące się tą informacją.
Czy ktoś spotkał się z tym problemem.
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 04 lis 2017, 21:32

Czy w ustawieniach drukarki wybrany jest prawidłowy sterownik?
Czy pojawia się coś w pliku /var/log/cups/error_log?
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 05 lis 2017, 19:08

Witam,
Dzisiaj usunąłem i ponownie dodałem tę drukarkę, poniżej zapisy w error_log od tego momentu

Kod: Zaznacz cały

 W [05/Nov/2017:18:20:49 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200S500_Series-Gray..\' already exists
W [05/Nov/2017:18:20:49 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200S500_Series-RGB..\' already exists
E [05/Nov/2017:18:22:49 +0100] [Job 34] Unable to open raster stream - : Broken pipe
E [05/Nov/2017:18:22:52 +0100] [Job 34] Job stopped due to filter errors; please consult the error_log file for details.
D [05/Nov/2017:18:22:52 +0100] [Job 34] The following messages were recorded from 18:22:48 to 18:22:52
D [05/Nov/2017:18:22:52 +0100] [Job 34] Adding start banner page "none".
D [05/Nov/2017:18:22:52 +0100] [Job 34] Adding end banner page "none".
D [05/Nov/2017:18:22:52 +0100] [Job 34] File of type application/vnd.cups-pdf-banner queued by "tata".
D [05/Nov/2017:18:22:52 +0100] [Job 34] hold_until=0
D [05/Nov/2017:18:22:52 +0100] [Job 34] Queued on "Lexmark_Pro200S500_Series" by "tata".
D [05/Nov/2017:18:22:52 +0100] [Job 34] time-at-processing=1509902568
D [05/Nov/2017:18:22:52 +0100] [Job 34] 4 filters for job:
D [05/Nov/2017:18:22:52 +0100] [Job 34] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [05/Nov/2017:18:22:52 +0100] [Job 34] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [05/Nov/2017:18:22:52 +0100] [Job 34] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [05/Nov/2017:18:22:52 +0100] [Job 34] /usr/local/lexmark/v3/bin/printfilter (application/vnd.cups-raster to printer/Lexmark_Pro200S500_Series, cost 0)
D [05/Nov/2017:18:22:52 +0100] [Job 34] job-sheets=none,none
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[0]="Lexmark_Pro200S500_Series"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[1]="34"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[2]="tata"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[3]="Test Page"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[4]="1"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[5]="job-uuid=urn:uuid:2394a319-2f7c-33eb-778f-26abd06a6e8e job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1509902568 time-at-processing=1509902568"
D [05/Nov/2017:18:22:52 +0100] [Job 34] argv[6]="/var/spool/cups/d00034-001"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[8]="HOME=/var/spool/cups/tmp"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[10]="SERVER_ADMIN=root@Tata-Mint"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[11]="SOFTWARE=CUPS/2.1.3"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[13]="USER=root"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[14]="CUPS_MAX_MESSAGE=2047"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[17]="IPP_PORT=631"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[18]="CHARSET=utf-8"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[19]="LANG=pl_PL.UTF-8"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[20]="PPD=/etc/cups/ppd/Lexmark_Pro200S500_Series.ppd"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[21]="RIP_MAX_CACHE=128m"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[23]="DEVICE_URI=lxhcp://192.168.1.10"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[24]="PRINTER_INFO="
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[25]="PRINTER_LOCATION="
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[26]="PRINTER=Lexmark_Pro200S500_Series"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[27]="PRINTER_STATE_REASONS=none"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[28]="CUPS_FILETYPE=document"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[30]="AUTH_I****"
D [05/Nov/2017:18:22:52 +0100] [Job 34] Started filter /usr/lib/cups/filter/bannertopdf (PID 12484)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Started filter /usr/lib/cups/filter/pdftopdf (PID 12485)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Started filter /usr/lib/cups/filter/gstoraster (PID 12486)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Started filter /usr/local/lexmark/v3/bin/printfilter (PID 12487)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Started backend /usr/lib/cups/backend/lxhcp (PID 12488)
D [05/Nov/2017:18:22:52 +0100] [Job 34] execv failed: Permission denied
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12487 (/usr/local/lexmark/v3/bin/printfilter) stopped with status 113 (Permission denied)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Hint: Try setting the LogLevel to "debug" to find out more.
D [05/Nov/2017:18:22:52 +0100] [Job 34] PDF template file doesn\'t have form. It\'s okay.
D [05/Nov/2017:18:22:52 +0100] [Job 34] STATE: +connecting-to-device
D [05/Nov/2017:18:22:52 +0100] [Job 34] Looking up \"192.168.1.10\"...
D [05/Nov/2017:18:22:52 +0100] [Job 34] Color Manager: Calibration Mode/Off
D [05/Nov/2017:18:22:52 +0100] [Job 34] Calling FindDeviceById(cups-Lexmark_Pro200S500_Series)
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12484 (/usr/lib/cups/filter/bannertopdf) exited with no errors.
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12485 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [05/Nov/2017:18:22:52 +0100] [Job 34] Found device /org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series
D [05/Nov/2017:18:22:52 +0100] [Job 34] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Calling FindDeviceById(cups-Lexmark_Pro200S500_Series)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Found device /org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series
D [05/Nov/2017:18:22:52 +0100] [Job 34] Calling GetProfileForQualifiers(AllColors.Automatic....)
D [05/Nov/2017:18:22:52 +0100] [Job 34] Failed to send: org.freedesktop.ColorManager.Device.NothingMatched:nothing matched expression \'AllColors.Automatic.,AllColors.Automatic.*,AllColors.*.,AllColors.*.*,*\'
D [05/Nov/2017:18:22:52 +0100] [Job 34] Failed to get profile filename for cups-Lexmark_Pro200S500_Series
D [05/Nov/2017:18:22:52 +0100] [Job 34] Color Manager: no profiles specified in PPD
D [05/Nov/2017:18:22:52 +0100] [Job 34] Color Manager: ICC Profile: None
D [05/Nov/2017:18:22:52 +0100] [Job 34] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -sOutputType=5 -r600x600 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsCompression=1 -dcupsRowFeed=4 -dcupsRowStep=1 -scupsPageSizeName=Letter -I/usr/share/cups/fonts -c \'<</.HWMargins[18.000000 36.000000 18.000000 4.799988] /Margins[0 0]>>setpagedevice\' -f -_
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[7]=\"CUPS_STATEDIR=/var/run/cups\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[10]=\"SERVER_ADMIN=root@Tata-Mint\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[11]=\"SOFTWARE=CUPS/2.1.3\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[12]=\"USER=root\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[14]=\"CUPS_SERVER=/var/run/cups/cups.sock\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[16]=\"IPP_PORT=631\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[17]=\"CHARSET=utf-8\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[18]=\"LANG=pl_PL.UTF-8\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[19]=\"PPD=/etc/cups/ppd/Lexmark_Pro200S500_Series.ppd\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[20]=\"RIP_MAX_CACHE=128m\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[21]=\"CONTENT_TYPE=application/vnd.cups-pdf-banner\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[22]=\"DEVICE_URI=lxhcp://192.168.1.10\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[23]=\"PRINTER_INFO=\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[24]=\"PRINTER_LOCATION=\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[25]=\"PRINTER=Lexmark_Pro200S500_Series\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[27]=\"CUPS_FILETYPE=document\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] Start rendering...
D [05/Nov/2017:18:22:52 +0100] [Job 34] Processing page 1...
D [05/Nov/2017:18:22:52 +0100] [Job 34] Error: /ioerror in --showpage--
D [05/Nov/2017:18:22:52 +0100] [Job 34] Operand stack:
D [05/Nov/2017:18:22:52 +0100] [Job 34] (/tmp/gs_9oflWo)   --nostringval--   1   true
D [05/Nov/2017:18:22:52 +0100] [Job 34] Execution stack:
D [05/Nov/2017:18:22:52 +0100] [Job 34] %interp_exit   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   --nostringval--   --nostringval--   false   1   %stopped_push   1981   1   3   %oparray_pop   1980   1   3   %oparray_pop   1964   1   3   %oparray_pop   --nostringval--   --nostringval--   --nostringval--   2   1   1   --nostringval--   %for_pos_int_continue   --nostringval--   --nostringval--   1858   2   9   %oparray_pop   --nostringval--   --nostringval--
D [05/Nov/2017:18:22:52 +0100] [Job 34] Dictionary stack:
D [05/Nov/2017:18:22:52 +0100] [Job 34] --dict:1209/1684(ro)(G)--   --dict:1/20(G)--   --dict:83/200(L)--   --dict:83/200(L)--   --dict:132/256(ro)(G)--   --dict:283/300(ro)(G)--   --dict:28/32(L)--   --dict:6/8(L)--   --dict:26/40(L)--
D [05/Nov/2017:18:22:52 +0100] [Job 34] Current allocation mode is local
D [05/Nov/2017:18:22:52 +0100] [Job 34] Last OS error: Broken pipe
D [05/Nov/2017:18:22:52 +0100] [Job 34] GPL Ghostscript 9.18: Unrecoverable error, exit code 1
D [05/Nov/2017:18:22:52 +0100] [Job 34] Rendering completed
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12486 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [05/Nov/2017:18:22:52 +0100] [Job 34] hrDeviceDesc=\"Unknown\"
D [05/Nov/2017:18:22:52 +0100] [Job 34] prtGeneralCurrentLocalization type is 0, expected 2!
D [05/Nov/2017:18:22:52 +0100] [Job 34] backendWaitLoop(snmp_fd=7, addr=0x55b09e34a3b8, side_cb=0x55b09c86c000)
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12488 (/usr/lib/cups/backend/lxhcp) exited with no errors.
D [05/Nov/2017:18:22:52 +0100] [Job 34] End of messages
D [05/Nov/2017:18:22:52 +0100] [Job 34] printer-state=3(idle)
D [05/Nov/2017:18:22:52 +0100] [Job 34] printer-state-message="Rendering completed"
D [05/Nov/2017:18:22:52 +0100] [Job 34] printer-state-reasons=none
E [05/Nov/2017:18:23:02 +0100] [cups-deviced] PID 12533 (gutenprint52+usb) stopped with status 1!
I [05/Nov/2017:18:23:52 +0100] Listening to 0.0.0.0:631 (IPv4)
I [05/Nov/2017:18:23:52 +0100] Listening to [v1.::]:631 (IPv6)
E [05/Nov/2017:18:23:52 +0100] Unknown directive JobPrivateAccess on line 94 of /etc/cups/cupsd.conf.
E [05/Nov/2017:18:23:52 +0100] Unknown directive JobPrivateValues on line 95 of /etc/cups/cupsd.conf.
E [05/Nov/2017:18:23:52 +0100] Unknown directive SubscriptionPrivateAccess on line 96 of /etc/cups/cupsd.conf.
E [05/Nov/2017:18:23:52 +0100] Unknown directive SubscriptionPrivateValues on line 97 of /etc/cups/cupsd.conf.
I [05/Nov/2017:18:23:52 +0100] Remote access is enabled.
D [05/Nov/2017:18:23:52 +0100] Added auto ServerAlias Tata-Mint
I [05/Nov/2017:18:23:52 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [05/Nov/2017:18:23:52 +0100] Using keychain "/etc/cups/ssl" for server name "Tata-Mint".
D [05/Nov/2017:18:23:52 +0100] Repairing access permissions of "/etc/cups/classes.conf"
I [05/Nov/2017:18:23:52 +0100] Configured for up to 100 clients.
I [05/Nov/2017:18:23:52 +0100] Allowing up to 100 client connections per host.
I [05/Nov/2017:18:23:52 +0100] Using policy "default" as the default.
D [05/Nov/2017:18:23:52 +0100] load_ppd: Loading /var/cache/cups/Lexmark_Pro200_USB.data...
D [05/Nov/2017:18:23:52 +0100] cupsdRegisterPrinter(p=0x55e6140689e0(Lexmark_Pro200_USB))
D [05/Nov/2017:18:23:52 +0100] load_ppd: Loading /var/cache/cups/Lexmark_Pro200S500_Series.data...
D [05/Nov/2017:18:23:52 +0100] cupsdRegisterPrinter(p=0x55e614064c10(Lexmark_Pro200S500_Series))
D [05/Nov/2017:18:23:52 +0100] cupsdMarkDirty(--p--)
D [05/Nov/2017:18:23:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [05/Nov/2017:18:23:52 +0100] Partial reload complete.
D [05/Nov/2017:18:23:52 +0100] Calling FindDeviceById(cups-Lexmark_Pro200_USB)
D [05/Nov/2017:18:23:52 +0100] Calling DeleteDevice(/org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200_USB)
D [05/Nov/2017:18:23:52 +0100] Using profile ID "Lexmark_Pro200_USB-Gray..".
D [05/Nov/2017:18:23:52 +0100] Calling CreateProfile(Lexmark_Pro200_USB-Gray..,temp)
W [05/Nov/2017:18:23:52 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200_USB-Gray..\' already exists
D [05/Nov/2017:18:23:52 +0100] Using profile ID "Lexmark_Pro200_USB-RGB..".
D [05/Nov/2017:18:23:52 +0100] Calling CreateProfile(Lexmark_Pro200_USB-RGB..,temp)
W [05/Nov/2017:18:23:52 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200_USB-RGB..\' already exists
I [05/Nov/2017:18:23:52 +0100] Registering ICC color profiles for "Lexmark_Pro200_USB".
D [05/Nov/2017:18:23:52 +0100] Calling CreateDevice(cups-Lexmark_Pro200_USB,temp)
D [05/Nov/2017:18:23:52 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200_USB".
D [05/Nov/2017:18:23:52 +0100] Calling FindDeviceById(cups-Lexmark_Pro200S500_Series)
D [05/Nov/2017:18:23:52 +0100] Calling DeleteDevice(/org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series)
D [05/Nov/2017:18:23:52 +0100] Using profile ID "Lexmark_Pro200S500_Series-Gray..".
D [05/Nov/2017:18:23:52 +0100] Calling CreateProfile(Lexmark_Pro200S500_Series-Gray..,temp)
W [05/Nov/2017:18:23:52 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200S500_Series-Gray..\' already exists
D [05/Nov/2017:18:23:52 +0100] Using profile ID "Lexmark_Pro200S500_Series-RGB..".
D [05/Nov/2017:18:23:52 +0100] Calling CreateProfile(Lexmark_Pro200S500_Series-RGB..,temp)
W [05/Nov/2017:18:23:52 +0100] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Pro200S500_Series-RGB..\' already exists
I [05/Nov/2017:18:23:52 +0100] Registering ICC color profiles for "Lexmark_Pro200S500_Series".
D [05/Nov/2017:18:23:52 +0100] Calling CreateDevice(cups-Lexmark_Pro200S500_Series,temp)
D [05/Nov/2017:18:23:52 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series".
I [05/Nov/2017:18:23:52 +0100] Listening to /var/run/cups/cups.sock on fd 3...
I [05/Nov/2017:18:23:52 +0100] Listening to 0.0.0.0:631 on fd 10...
I [05/Nov/2017:18:23:52 +0100] Listening to [v1.::]:631 on fd 11...
I [05/Nov/2017:18:23:52 +0100] Resuming new connection processing...
D [05/Nov/2017:18:23:52 +0100] Avahi server connection now available, registering printers for Bonjour broadcasting.
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" UUID=eccbf51c-1e5e-30b4-6761-39eee61d37d4
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" rp=printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" UUID=eccbf51c-1e5e-30b4-6761-39eee61d37d4
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" rp=printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=21582772-9fc8-3949-7a30-141fd735232c
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=21582772-9fc8-3949-7a30-141fd735232c
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" UUID=eccbf51c-1e5e-30b4-6761-39eee61d37d4
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" rp=printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200_USB @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" UUID=eccbf51c-1e5e-30b4-6761-39eee61d37d4
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" rp=printers/Lexmark_Pro200_USB
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200_USB @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=21582772-9fc8-3949-7a30-141fd735232c
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=21582772-9fc8-3949-7a30-141fd735232c
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [05/Nov/2017:18:23:52 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [05/Nov/2017:18:23:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [05/Nov/2017:18:23:52 +0100] Notifier dbus started - PID = 12557
D [05/Nov/2017:18:23:52 +0100] cupsdMarkDirty(----S)
D [05/Nov/2017:18:23:52 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [05/Nov/2017:18:23:52 +0100] [Client 314] Accepted from localhost (Domain)
D [05/Nov/2017:18:23:52 +0100] [Client 314] Waiting for request.
D [05/Nov/2017:18:23:52 +0100] cupsdAddCert: Adding certificate for PID 0
D [05/Nov/2017:18:23:52 +0100] Report: clients=1
D [05/Nov/2017:18:23:52 +0100] Report: jobs=1
D [05/Nov/2017:18:23:52 +0100] Report: jobs-active=1
D [05/Nov/2017:18:23:52 +0100] Report: printers=2
D [05/Nov/2017:18:23:52 +0100] Report: stringpool-string-count=31430
D [05/Nov/2017:18:23:52 +0100] Report: stringpool-alloc-bytes=14824
D [05/Nov/2017:18:23:52 +0100] Report: stringpool-total-bytes=537080
D [05/Nov/2017:18:23:52 +0100] PID 3868 (/usr/lib/cups/notifier/dbus) exited with no errors.
D [05/Nov/2017:18:23:52 +0100] [Notifier] state=3
D [05/Nov/2017:18:23:52 +0100] [Notifier] Connected to D-BUS
D [05/Nov/2017:18:23:52 +0100] [Notifier] ServerRestarted
D [05/Nov/2017:18:23:53 +0100] [Client 315] Accepted from localhost (Domain)
D [05/Nov/2017:18:23:53 +0100] [Client 315] Waiting for request.
I [05/Nov/2017:18:23:53 +0100] Expiring subscriptions...
I [05/Nov/2017:18:23:54 +0100] Expiring subscriptions...
D [05/Nov/2017:18:24:01 +0100] [Client 315] POST / HTTP/1.1
D [05/Nov/2017:18:24:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [05/Nov/2017:18:24:01 +0100] [Client 315] Read: status=200
D [05/Nov/2017:18:24:01 +0100] [Client 315] No authentication data provided.
D [05/Nov/2017:18:24:01 +0100] [Client 315] 2.0 Get-Jobs 105
D [05/Nov/2017:18:24:01 +0100] Get-Jobs ipp://localhost/printers/
D [05/Nov/2017:18:24:01 +0100] [Job 34] Loading attributes...
D [05/Nov/2017:18:24:01 +0100] [Client 315] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [05/Nov/2017:18:24:01 +0100] [Client 315] Content-Length: 179
D [05/Nov/2017:18:24:01 +0100] [Client 315] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [05/Nov/2017:18:24:01 +0100] Expiring subscriptions...
D [05/Nov/2017:18:24:01 +0100] [Client 315] con->http=0x55e61412ee80
D [05/Nov/2017:18:24:01 +0100] [Client 315] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=179, response=0x55e6141dab20(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:24:01 +0100] [Client 315] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:24:01 +0100] [Client 315] bytes=0, http_state=0, data_remaining=179
D [05/Nov/2017:18:24:01 +0100] [Client 315] Flushing write buffer.
D [05/Nov/2017:18:24:01 +0100] [Client 315] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:24:01 +0100] [Client 315] Waiting for request.
D [05/Nov/2017:18:24:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [05/Nov/2017:18:24:01 +0100] [Client 315] POST / HTTP/1.1
D [05/Nov/2017:18:24:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [05/Nov/2017:18:24:01 +0100] [Client 315] Read: status=200
D [05/Nov/2017:18:24:01 +0100] [Client 315] No authentication data provided.
D [05/Nov/2017:18:24:01 +0100] [Client 315] 2.0 Get-Jobs 106
D [05/Nov/2017:18:24:01 +0100] Get-Jobs ipp://localhost/printers/
I [05/Nov/2017:18:24:01 +0100] [Client 315] Limiting Get-Jobs response to 500 jobs.
D [05/Nov/2017:18:24:01 +0100] [Client 315] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [05/Nov/2017:18:24:01 +0100] [Client 315] Content-Length: 89
D [05/Nov/2017:18:24:01 +0100] [Client 315] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [05/Nov/2017:18:24:01 +0100] [Client 315] con->http=0x55e61412ee80
D [05/Nov/2017:18:24:01 +0100] [Client 315] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=89, response=0x55e61412a890(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:24:01 +0100] [Client 315] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:24:01 +0100] [Client 315] bytes=0, http_state=0, data_remaining=89
D [05/Nov/2017:18:24:01 +0100] [Client 315] Flushing write buffer.
D [05/Nov/2017:18:24:01 +0100] [Client 315] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:24:01 +0100] [Client 315] Waiting for request.
D [05/Nov/2017:18:24:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [05/Nov/2017:18:24:02 +0100] Expiring subscriptions...
D [05/Nov/2017:18:24:22 +0100] [Client 314] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [05/Nov/2017:18:24:22 +0100] [Client 314] Closing connection.
D [05/Nov/2017:18:24:22 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [05/Nov/2017:18:24:22 +0100] Generating printcap /var/run/cups/printcap...
I [05/Nov/2017:18:24:22 +0100] Saving subscriptions.conf...
D [05/Nov/2017:18:24:22 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [05/Nov/2017:18:24:22 +0100] Expiring subscriptions...
I [05/Nov/2017:18:24:23 +0100] Expiring subscriptions...
D [05/Nov/2017:18:26:47 +0100] [Client 316] Accepted from localhost (Domain)
D [05/Nov/2017:18:26:47 +0100] [Client 316] Waiting for request.
I [05/Nov/2017:18:26:47 +0100] Expiring subscriptions...
D [05/Nov/2017:18:26:47 +0100] [Job 34] Unloading...
D [05/Nov/2017:18:26:47 +0100] Report: clients=2
D [05/Nov/2017:18:26:47 +0100] Report: jobs=1
D [05/Nov/2017:18:26:47 +0100] Report: jobs-active=1
D [05/Nov/2017:18:26:47 +0100] Report: printers=2
D [05/Nov/2017:18:26:47 +0100] Report: stringpool-string-count=31432
D [05/Nov/2017:18:26:47 +0100] Report: stringpool-alloc-bytes=14888
D [05/Nov/2017:18:26:47 +0100] Report: stringpool-total-bytes=537128
D [05/Nov/2017:18:26:47 +0100] [Client 316] POST / HTTP/1.1
D [05/Nov/2017:18:26:47 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [05/Nov/2017:18:26:47 +0100] [Client 316] Read: status=200
D [05/Nov/2017:18:26:47 +0100] [Client 316] No authentication data provided.
D [05/Nov/2017:18:26:47 +0100] [Client 316] 2.0 Get-Printer-Attributes 107
D [05/Nov/2017:18:26:47 +0100] Get-Printer-Attributes ipp://localhost/printers/Lexmark%5FPro200S500%5FSeries
D [05/Nov/2017:18:26:47 +0100] [Client 316] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Lexmark%5FPro200S500%5FSeries) from localhost
D [05/Nov/2017:18:26:47 +0100] [Client 316] Content-Length: 12904
D [05/Nov/2017:18:26:47 +0100] [Client 316] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [05/Nov/2017:18:26:47 +0100] [Client 316] con->http=0x55e61412bc70
D [05/Nov/2017:18:26:47 +0100] [Client 316] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12904, response=0x55e6141da950(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:26:47 +0100] [Client 316] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:26:47 +0100] [Client 316] bytes=0, http_state=0, data_remaining=12904
D [05/Nov/2017:18:26:47 +0100] [Client 316] Flushing write buffer.
D [05/Nov/2017:18:26:47 +0100] [Client 316] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:26:47 +0100] [Client 316] Waiting for request.
D [05/Nov/2017:18:26:47 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I [05/Nov/2017:18:26:48 +0100] Expiring subscriptions...
D [05/Nov/2017:18:26:51 +0100] [Client 316] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [05/Nov/2017:18:26:51 +0100] [Client 316] Closing connection.
D [05/Nov/2017:18:26:51 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [05/Nov/2017:18:26:51 +0100] Expiring subscriptions...
I [05/Nov/2017:18:26:52 +0100] Expiring subscriptions...
D [05/Nov/2017:18:27:31 +0100] [Client 317] Accepted from localhost (Domain)
D [05/Nov/2017:18:27:31 +0100] [Client 317] Waiting for request.
I [05/Nov/2017:18:27:31 +0100] Expiring subscriptions...
D [05/Nov/2017:18:27:31 +0100] [Client 318] Accepted from localhost (Domain)
D [05/Nov/2017:18:27:31 +0100] [Client 318] Waiting for request.
D [05/Nov/2017:18:27:31 +0100] [Client 318] POST / HTTP/1.1
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [05/Nov/2017:18:27:31 +0100] [Client 318] Read: status=200
D [05/Nov/2017:18:27:31 +0100] [Client 318] No authentication data provided.
D [05/Nov/2017:18:27:31 +0100] [Client 318] 2.0 Get-Job-Attributes 1
D [05/Nov/2017:18:27:31 +0100] Get-Job-Attributes ipp://localhost/jobs/34
D [05/Nov/2017:18:27:31 +0100] [Job 34] Loading attributes...
D [05/Nov/2017:18:27:31 +0100] [Client 318] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/34) from localhost
D [05/Nov/2017:18:27:31 +0100] [Client 318] Content-Length: 75
D [05/Nov/2017:18:27:31 +0100] [Client 318] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [05/Nov/2017:18:27:31 +0100] [Client 318] con->http=0x55e614266d60
D [05/Nov/2017:18:27:31 +0100] [Client 318] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55e6141dcf90(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:27:31 +0100] [Client 318] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:27:31 +0100] [Client 318] bytes=0, http_state=0, data_remaining=75
D [05/Nov/2017:18:27:31 +0100] [Client 318] Flushing write buffer.
D [05/Nov/2017:18:27:31 +0100] [Client 318] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:27:31 +0100] [Client 318] Waiting for request.
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [05/Nov/2017:18:27:31 +0100] [Client 317] POST /jobs/ HTTP/1.1
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [05/Nov/2017:18:27:31 +0100] [Client 317] Read: status=200
D [05/Nov/2017:18:27:31 +0100] [Client 317] No authentication data provided.
D [05/Nov/2017:18:27:31 +0100] [Client 317] 2.0 Cancel-Job 108
D [05/Nov/2017:18:27:31 +0100] Cancel-Job ipp://localhost/jobs/34
D [05/Nov/2017:18:27:31 +0100] cupsdIsAuthorized: requesting-user-name="tata"
D [05/Nov/2017:18:27:31 +0100] [Job 34] time-at-completed=1509902851
D [05/Nov/2017:18:27:31 +0100] cupsdMarkDirty(----S)
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
I [05/Nov/2017:18:27:31 +0100] [Job 34] Job canceled by \"tata\"
I [05/Nov/2017:18:27:31 +0100] Expiring subscriptions...
D [05/Nov/2017:18:27:31 +0100] cupsdMarkDirty(---J-)
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [05/Nov/2017:18:27:31 +0100] [Job 34] Canceled by "tata".
D [05/Nov/2017:18:27:31 +0100] [Client 317] Returning IPP successful-ok for Cancel-Job (ipp://localhost/jobs/34) from localhost
D [05/Nov/2017:18:27:31 +0100] [Client 317] Content-Length: 75
D [05/Nov/2017:18:27:31 +0100] [Client 317] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [05/Nov/2017:18:27:31 +0100] [Job 34] Removing document files.
D [05/Nov/2017:18:27:31 +0100] cupsdMarkDirty(---J-)
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [05/Nov/2017:18:27:31 +0100] [Client 317] con->http=0x55e61412bc70
D [05/Nov/2017:18:27:31 +0100] [Client 317] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55e61412a620(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:27:31 +0100] [Client 317] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:27:31 +0100] [Client 317] bytes=0, http_state=0, data_remaining=75
D [05/Nov/2017:18:27:31 +0100] [Client 317] Flushing write buffer.
D [05/Nov/2017:18:27:31 +0100] [Client 317] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:27:31 +0100] [Client 317] Waiting for request.
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [05/Nov/2017:18:27:31 +0100] [Notifier] state=3
D [05/Nov/2017:18:27:31 +0100] [Notifier] JobCompleted
D [05/Nov/2017:18:27:31 +0100] [Client 317] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [05/Nov/2017:18:27:31 +0100] [Client 317] Closing connection.
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [05/Nov/2017:18:27:31 +0100] [Client 319] Accepted from localhost (Domain)
D [05/Nov/2017:18:27:31 +0100] [Client 319] Waiting for request.
D [05/Nov/2017:18:27:31 +0100] [Client 319] POST / HTTP/1.1
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [05/Nov/2017:18:27:31 +0100] [Client 319] Read: status=200
D [05/Nov/2017:18:27:31 +0100] [Client 319] No authentication data provided.
D [05/Nov/2017:18:27:31 +0100] [Client 319] 2.0 Get-Notifications 109
D [05/Nov/2017:18:27:31 +0100] Get-Notifications /
D [05/Nov/2017:18:27:31 +0100] cupsdIsAuthorized: requesting-user-name="tata"
D [05/Nov/2017:18:27:31 +0100] [Client 319] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [05/Nov/2017:18:27:31 +0100] [Client 319] Content-Length: 690
D [05/Nov/2017:18:27:31 +0100] [Client 319] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [05/Nov/2017:18:27:31 +0100] [Client 319] con->http=0x55e61412bc70
D [05/Nov/2017:18:27:31 +0100] [Client 319] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=690, response=0x55e61412a8d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [05/Nov/2017:18:27:31 +0100] [Client 319] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [05/Nov/2017:18:27:31 +0100] [Client 319] bytes=0, http_state=0, data_remaining=690
D [05/Nov/2017:18:27:31 +0100] [Client 319] Flushing write buffer.
D [05/Nov/2017:18:27:31 +0100] [Client 319] New state is HTTP_STATE_WAITING
D [05/Nov/2017:18:27:31 +0100] [Client 319] Waiting for request.
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [05/Nov/2017:18:27:31 +0100] [Client 319] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [05/Nov/2017:18:27:31 +0100] [Client 319] Closing connection.
D [05/Nov/2017:18:27:31 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [05/Nov/2017:18:27:32 +0100] Expiring subscriptions...
D [05/Nov/2017:18:28:01 +0100] [Client 318] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [05/Nov/2017:18:28:01 +0100] [Client 318] Closing connection.
D [05/Nov/2017:18:28:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [05/Nov/2017:18:28:01 +0100] Saving job.cache...
I [05/Nov/2017:18:28:01 +0100] Saving subscriptions.conf...
D [05/Nov/2017:18:28:01 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [05/Nov/2017:18:28:01 +0100] Expiring subscriptions...
D [05/Nov/2017:18:28:01 +0100] Report: clients=1
D [05/Nov/2017:18:28:01 +0100] Report: jobs=1
D [05/Nov/2017:18:28:01 +0100] Report: jobs-active=0
D [05/Nov/2017:18:28:01 +0100] Report: printers=2
D [05/Nov/2017:18:28:01 +0100] Report: stringpool-string-count=31508
D [05/Nov/2017:18:28:01 +0100] Report: stringpool-alloc-bytes=15824
D [05/Nov/2017:18:28:01 +0100] Report: stringpool-total-bytes=538784
I [05/Nov/2017:18:28:02 +0100] Expiring subscriptions...
HTTP_STATE_WAITING Closing for error 32 (Broken pipe) taki problem znalazłem na forach angielsko języcznych jednak słabo znam angielski i nic z tym nie potrafiłem zrobić.
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 06 lis 2017, 04:08

Kod: Zaznacz cały

D [05/Nov/2017:18:22:52 +0100] [Job 34] Started backend /usr/lib/cups/backend/lxhcp (PID 12488)
D [05/Nov/2017:18:22:52 +0100] [Job 34] execv failed: Permission denied
D [05/Nov/2017:18:22:52 +0100] [Job 34] PID 12487 (/usr/local/lexmark/v3/bin/printfilter) stopped with status 113 (Permission denied)
Ten plik zdaje się mieć złe uprawnienia: /usr/local/lexmark/v3/bin/printfilter

Pokaż wynik polecenia:

Kod: Zaznacz cały

ls -l /usr/local/lexmark/v3/bin/printfilter
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 06 lis 2017, 17:17

poniżej wynik polecenia
Tata-Mint tata # ls -l /usr/local/lexmark/v3/bin/printfilter
-rwxr-xr-x 1 root root 146921 sie 16 2012 /usr/local/lexmark/v3/bin/printfilter
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 07 lis 2017, 18:46

Wygląda dobrze. Pokaż jeszcze to:

Kod: Zaznacz cały

ls -al /usr/local/lexmark/v3/bin/
ls -al /usr/local/lexmark/v3/etc/
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 07 lis 2017, 19:32

poniżej wyniki poleceń

Kod: Zaznacz cały

tata@Tata-Mint ~ $ ls -al /usr/local/lexmark/v3/bin/
razem 1004
drwxr-xr-x 3 root bin    4096 paź 30 20:14 .
drwxr-xr-x 8 root bin    4096 paź 30 20:14 ..
-rwxr-xr-x 1 root bin  755469 sie 16  2012 lxhcp
-rwxrwxr-x 1 root bin  110411 sie 16  2012 lxusb
-rwxr-xr-x 1 root root 146921 sie 16  2012 printfilter
drwxr-xr-x 2 root bin    4096 paź 30 20:14 .scripts

Kod: Zaznacz cały

tata@Tata-Mint ~ $ ls -al /usr/local/lexmark/v3/etc/
razem 6624
drwxr-xr-x 2 root bin    4096 paź 30 20:14 .
drwxr-xr-x 8 root bin    4096 paź 30 20:14 ..
-rw-rw-r-- 1 root bin    1237 sie 16  2012 99-lexmark-print-v3-10.rules
-rw-rw-r-- 1 root bin 1272981 sie 16  2012 lxev07clr.lut
-rw-rw-r-- 1 root bin 1101333 sie 16  2012 lxev08clr.lut
-rw-rw-r-- 1 root bin  824868 sie 16  2012 lxev207clr.lut
-rw-rw-r-- 1 root bin  716652 sie 16  2012 lxev208clr.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxknf09clr1.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxknf09clr2.lut
-rw-rw-r-- 1 root bin  318352 sie 16  2012 lxknf09clr3.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxkns09clr1.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxkns09clr2.lut
-rw-rw-r-- 1 root bin  318352 sie 16  2012 lxkns09clr3.lut
-rw-rw-r-- 1 root bin   45756 sie 16  2012 lxPro200-S500.ppd
-rw-rw-r-- 1 root bin   45661 sie 16  2012 lxPro700.ppd
-rw-rw-r-- 1 root bin   52939 sie 16  2012 lxPro800-Pro900.ppd
-rw-rw-r-- 1 root bin   42953 sie 16  2012 lxS300-S400.ppd
-rw-rw-r-- 1 root bin   45623 sie 16  2012 lxS600.ppd
-rw-rw-r-- 1 root bin   42120 sie 16  2012 lxS800.ppd
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxv101clr.lut
-rw-rw-r-- 1 root bin   41495 sie 16  2012 lxX2600.ppd
-rw-rw-r-- 1 root bin   44853 sie 16  2012 lxX3646.ppd
-rw-rw-r-- 1 root bin   44471 sie 16  2012 lxX4900.ppd
-rw-rw-r-- 1 root bin   46783 sie 16  2012 lxX5666.ppd
-rw-rw-r-- 1 root bin   44471 sie 16  2012 lxX7600.ppd
-rw-rw-r-- 1 root bin   41543 sie 16  2012 lxZ2300.ppd
-rw-rw-r-- 1 root bin   41543 sie 16  2012 lxZ2400.ppd
-rw-rw-r-- 1 root bin     235 sie 16  2012 umf.conf
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 08 lis 2017, 11:56

Czy w systwmowych ustawieniach drukarki widać jakieś komunikaty?
Czy na stronie cups http://localhost:631/ w kontekście drukarki są jakieś błędy?
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 08 lis 2017, 12:33

Wygląda to mniej więcej tak:
-instalując ją pod 14.04 jeśli po instalacji usunę ją to później wystarczy podać komendę wyszukaj drukarkę sieciową i on ją znajduje.
-instalując ją pod 16.04 jeśli po instalacji ją usunę to po podaniu komendy wyszukaj drukarkę sieciową to jej nie ma. Muszę ponownie uruchomić jej instalację (poprzez instalator pobrany ze strony Lexmarka).
Z tego widać iż jest coś winnego pomiędzy 14 a 16.

Pod 14 w pliku /var/log/cups/error_log jest pusto, a http://localhost:631/ pokazuje stan " bezczynna" przed drukiem a później poszczególne kroki aż do stanu "rendering complet" (oczywiście drukarka wykonuje wydruk)

Pod 16 w pliku /var/log/cups/error_log jak w drugim mailu, a http://localhost:631/ pokazuje stan "bezczynna" przed drukiem a później od razu "rendering complet" (a na drukarce nic się nie odbyło).

Jedno i drugie wykonuje z tego samego komputera mam po prostu zainstalowaną 14 i 16.
ps. pisze to trochę z pamięci dopiero wieczorem będę miał dostęp do tego komputera

dokładam zrzut ekranu z http://localhost:631/
Załączniki
Screenshot-2017-11-8 Lexmark_Pro200S500_Series - CUPS 2 1 3.png
(66.52 KiB) Nie pobierany
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 12 lis 2017, 10:39

Witam kolegów,
Może uda się jeszcze coś zdziałać pod 16.04 żeby ta drukarkę uruchomić, szczególnie jeśli skaner działa.
Ja osobiście jestem za słaby. Na pewno wielu innych z tego skorzysta jeśli nam się coś uda.
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 12 lis 2017, 18:20

Pokaż wyniki tych poleceń z Ubuntu 14.04:

Kod: Zaznacz cały

ls -al /usr/local/lexmark/v3/bin/
ls -al /usr/local/lexmark/v3/etc/
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 12 lis 2017, 21:30

Kod: Zaznacz cały

razem 1004
drwxr-xr-x 3 root bin    4096 paź 28 20:57 .
drwxr-xr-x 8 root bin    4096 paź 28 20:57 ..
-rwxr-xr-x 1 root bin  755469 sie 16  2012 lxhcp
-rwxrwxr-x 1 root bin  110411 sie 16  2012 lxusb
-rwxr-xr-x 1 root root 146921 sie 16  2012 printfilter
drwxr-xr-x 2 root bin    4096 paź 28 20:57 .scripts

Kod: Zaznacz cały

razem 6624
drwxr-xr-x 2 root bin    4096 paź 28 20:57 .
drwxr-xr-x 8 root bin    4096 paź 28 20:57 ..
-rw-rw-r-- 1 root bin    1237 sie 16  2012 99-lexmark-print-v3-10.rules
-rw-rw-r-- 1 root bin 1272981 sie 16  2012 lxev07clr.lut
-rw-rw-r-- 1 root bin 1101333 sie 16  2012 lxev08clr.lut
-rw-rw-r-- 1 root bin  824868 sie 16  2012 lxev207clr.lut
-rw-rw-r-- 1 root bin  716652 sie 16  2012 lxev208clr.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxknf09clr1.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxknf09clr2.lut
-rw-rw-r-- 1 root bin  318352 sie 16  2012 lxknf09clr3.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxkns09clr1.lut
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxkns09clr2.lut
-rw-rw-r-- 1 root bin  318352 sie 16  2012 lxkns09clr3.lut
-rw-rw-r-- 1 root bin   45756 sie 16  2012 lxPro200-S500.ppd
-rw-rw-r-- 1 root bin   45661 sie 16  2012 lxPro700.ppd
-rw-rw-r-- 1 root bin   52939 sie 16  2012 lxPro800-Pro900.ppd
-rw-rw-r-- 1 root bin   42953 sie 16  2012 lxS300-S400.ppd
-rw-rw-r-- 1 root bin   45623 sie 16  2012 lxS600.ppd
-rw-rw-r-- 1 root bin   42120 sie 16  2012 lxS800.ppd
-rw-rw-r-- 1 root bin  317331 sie 16  2012 lxv101clr.lut
-rw-rw-r-- 1 root bin   41495 sie 16  2012 lxX2600.ppd
-rw-rw-r-- 1 root bin   44853 sie 16  2012 lxX3646.ppd
-rw-rw-r-- 1 root bin   44471 sie 16  2012 lxX4900.ppd
-rw-rw-r-- 1 root bin   46783 sie 16  2012 lxX5666.ppd
-rw-rw-r-- 1 root bin   44471 sie 16  2012 lxX7600.ppd
-rw-rw-r-- 1 root bin   41543 sie 16  2012 lxZ2300.ppd
-rw-rw-r-- 1 root bin   41543 sie 16  2012 lxZ2400.ppd
-rw-rw-r-- 1 root bin     235 sie 16  2012 umf.conf
Moim zdaniem są identyczne
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 12 lis 2017, 23:24

Wykonaj w systemie gdzie są problemy:

Kod: Zaznacz cały

sudo cupsctl LogLevel=debug
sudo service cups restart
spróbuj coś wydrukować a następnie pokaż logi (gdy będzie ich sporo - wtedy pokaż ostatnich kilkanaście-kilkadziesiąt linijek każdego z poleceń)

Kod: Zaznacz cały

journalctl -u cups
dmesg
pokaż też błędy widoczne na stronie cups w dziale Administration > View Error Log
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 13 lis 2017, 17:09

Próba wydruku po pierwszych dwóch podanych przez ciebie poleceniach
plik logidebud.txt

dmesg

plik dmesg.txt

journalctl -u cups

Kod: Zaznacz cały

-- Logs begin at pon 2017-11-13 16:26:43 CET, end at pon 2017-11-13 17:16:47 CET
lis 13 16:26:53 Tata-Mint systemd[1]: Started CUPS Scheduler.
lis 13 16:29:39 Tata-Mint systemd[1]: Stopping CUPS Scheduler...
lis 13 16:29:39 Tata-Mint systemd[1]: Stopped CUPS Scheduler.
lis 13 16:29:39 Tata-Mint systemd[1]: Started CUPS Scheduler.
lis 13 16:29:49 Tata-Mint systemd[1]: Stopping CUPS Scheduler...
lis 13 16:29:49 Tata-Mint systemd[1]: Stopped CUPS Scheduler.
lis 13 16:29:49 Tata-Mint systemd[1]: Started CUPS Scheduler.
lis 13 16:30:45 Tata-Mint hp[2622]: io/hpmud/pp.c 627: unable to read device-id 
lis 13 16:30:45 Tata-Mint /hpfax[2624]: [2624]: error: Failed to create /var/spo
lis 13 16:30:45 Tata-Mint /hpfax[2624]: io/hpmud/pp.c 627: unable to read device
lis 13 16:31:56 Tata-Mint systemd[1]: Stopping CUPS Scheduler...
lis 13 16:31:56 Tata-Mint systemd[1]: Stopped CUPS Scheduler.
lis 13 16:31:56 Tata-Mint systemd[1]: Started CUPS Scheduler.
lis 13 17:15:41 Tata-Mint systemd[1]: Stopping CUPS Scheduler...
lis 13 17:15:41 Tata-Mint systemd[1]: Stopped CUPS Scheduler.
lis 13 17:15:41 Tata-Mint systemd[1]: Started CUPS Scheduler.
lines 1-17/17 (END)

zapisy z Administration > View Error Log

Kod: Zaznacz cały

I [13/Nov/2017:16:31:56 +0100] Saving subscriptions.conf...
D [13/Nov/2017:16:31:56 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [13/Nov/2017:16:31:56 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
I [13/Nov/2017:16:31:56 +0100] Saving job.cache...
D [13/Nov/2017:16:31:56 +0100] [Job 40] Unloading...
D [13/Nov/2017:16:31:56 +0100] [Job 41] Unloading...
D [13/Nov/2017:16:31:56 +0100] cupsdStopSelect()
I [13/Nov/2017:16:31:57 +0100] Listening to 0.0.0.0:631 (IPv4)
I [13/Nov/2017:16:31:57 +0100] Listening to [v1.::]:631 (IPv6)
I [13/Nov/2017:16:31:57 +0100] Listening to /var/run/cups/cups.sock (Domain)
E [13/Nov/2017:16:31:57 +0100] Unknown directive JobPrivateAccess on line 93 of /etc/cups/cupsd.conf.
E [13/Nov/2017:16:31:57 +0100] Unknown directive JobPrivateValues on line 94 of /etc/cups/cupsd.conf.
E [13/Nov/2017:16:31:57 +0100] Unknown directive SubscriptionPrivateAccess on line 95 of /etc/cups/cupsd.conf.
E [13/Nov/2017:16:31:57 +0100] Unknown directive SubscriptionPrivateValues on line 96 of /etc/cups/cupsd.conf.
I [13/Nov/2017:16:31:57 +0100] Remote access is enabled.
D [13/Nov/2017:16:31:57 +0100] Added auto ServerAlias Tata-Mint
I [13/Nov/2017:16:31:57 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [13/Nov/2017:16:31:57 +0100] Using keychain "/etc/cups/ssl" for server name "Tata-Mint".
I [13/Nov/2017:16:31:57 +0100] Using default TempDir of /var/spool/cups/tmp...
I [13/Nov/2017:16:31:57 +0100] Configured for up to 100 clients.
I [13/Nov/2017:16:31:57 +0100] Allowing up to 100 client connections per host.
I [13/Nov/2017:16:31:57 +0100] Using policy "default" as the default.
I [13/Nov/2017:16:31:57 +0100] Full reload is required.
I [13/Nov/2017:16:31:57 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 49 types, 83 filters...
D [13/Nov/2017:16:31:57 +0100] Loading printer Lexmark_Pro200S500_Series...
D [13/Nov/2017:16:31:57 +0100] load_ppd: Loading /var/cache/cups/Lexmark_Pro200S500_Series.data...
D [13/Nov/2017:16:31:57 +0100] cupsdRegisterPrinter(p=0x55efabe6ebe0(Lexmark_Pro200S500_Series))
I [13/Nov/2017:16:31:57 +0100] Loading job cache file "/var/cache/cups/job.cache"...
D [13/Nov/2017:16:31:57 +0100] [Job 40] Loading from cache...
D [13/Nov/2017:16:31:57 +0100] [Job 41] Loading from cache...
D [13/Nov/2017:16:31:57 +0100] [Job 41] Loading attributes...
D [13/Nov/2017:16:31:57 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [13/Nov/2017:16:31:57 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
D [13/Nov/2017:16:31:57 +0100] cupsdAddSubscription(mask=0, dest=(nil)(), job=(nil)(0), uri="(null)")
I [13/Nov/2017:16:31:57 +0100] Full reload complete.
D [13/Nov/2017:16:31:57 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [13/Nov/2017:16:31:57 +0100] Cleaning out old files in "/var/spool/cups/tmp".
D [13/Nov/2017:16:31:57 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp/.hplip", pattern="(null)")
I [13/Nov/2017:16:31:57 +0100] Cleaning out old files in "/var/spool/cups/tmp/.hplip".
D [13/Nov/2017:16:31:57 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [13/Nov/2017:16:31:57 +0100] Cleaning out old files in "/var/cache/cups".
D [13/Nov/2017:16:31:57 +0100] service_checkin: pid=2792
D [13/Nov/2017:16:31:57 +0100] service_checkin: 1 listeners.
D [13/Nov/2017:16:31:57 +0100] service_checkin: Listener #1 at fd 3, "/var/run/cups/cups.sock".
D [13/Nov/2017:16:31:57 +0100] service_checkin: Matched existing listener #1 to /var/run/cups/cups.sock.
D [13/Nov/2017:16:31:57 +0100] Creating keep-alive file "/var/cache/cups/org.cups.cupsd".
D [13/Nov/2017:16:31:57 +0100] Calling FindDeviceById(cups-Lexmark_Pro200S500_Series)
D [13/Nov/2017:16:31:57 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id \'cups-Lexmark_Pro200S500_Series\' does not exist
D [13/Nov/2017:16:31:57 +0100] Using profile ID "Lexmark_Pro200S500_Series-Gray..".
D [13/Nov/2017:16:31:57 +0100] Calling CreateProfile(Lexmark_Pro200S500_Series-Gray..,temp)
D [13/Nov/2017:16:31:57 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Lexmark_Pro200S500_Series_Gray__".
D [13/Nov/2017:16:31:57 +0100] Using profile ID "Lexmark_Pro200S500_Series-RGB..".
D [13/Nov/2017:16:31:57 +0100] Calling CreateProfile(Lexmark_Pro200S500_Series-RGB..,temp)
D [13/Nov/2017:16:31:57 +0100] Created profile "/org/freedesktop/ColorManager/profiles/Lexmark_Pro200S500_Series_RGB__".
I [13/Nov/2017:16:31:57 +0100] Registering ICC color profiles for "Lexmark_Pro200S500_Series".
D [13/Nov/2017:16:31:57 +0100] Calling CreateDevice(cups-Lexmark_Pro200S500_Series,temp)
D [13/Nov/2017:16:31:57 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series".
D [13/Nov/2017:16:31:57 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series:AddProfile(/org/freedesktop/ColorManager/profiles/Lexmark_Pro200S500_Series_Gray__) [soft]
D [13/Nov/2017:16:31:57 +0100] Calling /org/freedesktop/ColorManager/devices/cups_Lexmark_Pro200S500_Series:AddProfile(/org/freedesktop/ColorManager/profiles/Lexmark_Pro200S500_Series_RGB__) [soft]
I [13/Nov/2017:16:31:57 +0100] Listening to 0.0.0.0:631 on fd 10...
I [13/Nov/2017:16:31:57 +0100] Listening to [v1.::]:631 on fd 11...
I [13/Nov/2017:16:31:57 +0100] Listening to /var/run/cups/cups.sock on fd 3...
I [13/Nov/2017:16:31:57 +0100] Resuming new connection processing...
D [13/Nov/2017:16:31:57 +0100] Avahi server connection now available, registering printers for Bonjour broadcasting.
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=9b6e32d0-7b4a-32ea-5c27-d1c5e474f8b5
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=9b6e32d0-7b4a-32ea-5c27-d1c5e474f8b5
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_printer._tcp".
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipps._tcp".
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=9b6e32d0-7b4a-32ea-5c27-d1c5e474f8b5
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [13/Nov/2017:16:31:57 +0100] Registering "Lexmark_Pro200S500_Series @ Tata-Mint" with DNS-SD type "_ipp._tcp".
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-type=0xF01E
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" printer-state=3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Duplex=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" Color=T
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" TLS=1.2
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" UUID=9b6e32d0-7b4a-32ea-5c27-d1c5e474f8b5
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" URF=DM3
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster,image/urf
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" product=(Lexmark Pro200-S500 Series)
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" priority=0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" adminurl=https://Tata-Mint.local:631/printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" ty=Lexmark Pro200-S500 Series, 1.0
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" rp=printers/Lexmark_Pro200S500_Series
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" qtotal=1
D [13/Nov/2017:16:31:57 +0100] DNS_SD "Lexmark_Pro200S500_Series @ Tata-Mint" txtvers=1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Nov/2017:16:31:57 +0100] cupsdAddCert: Adding certificate for PID 0
D [13/Nov/2017:16:31:57 +0100] Discarding unused server-started event...
D [13/Nov/2017:16:31:57 +0100] [Client 1] Accepted from localhost (Domain)
D [13/Nov/2017:16:31:57 +0100] [Client 1] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] Report: clients=1
D [13/Nov/2017:16:31:57 +0100] Report: jobs=2
D [13/Nov/2017:16:31:57 +0100] Report: jobs-active=1
D [13/Nov/2017:16:31:57 +0100] Report: printers=1
D [13/Nov/2017:16:31:57 +0100] Report: stringpool-string-count=8807
D [13/Nov/2017:16:31:57 +0100] Report: stringpool-alloc-bytes=11488
D [13/Nov/2017:16:31:57 +0100] Report: stringpool-total-bytes=167960
D [13/Nov/2017:16:31:57 +0100] [Client 1] POST / HTTP/1.1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Nov/2017:16:31:57 +0100] [Client 1] Read: status=200
D [13/Nov/2017:16:31:57 +0100] [Client 1] No authentication data provided.
D [13/Nov/2017:16:31:57 +0100] [Client 1] 2.0 Create-Printer-Subscriptions 1
D [13/Nov/2017:16:31:57 +0100] Create-Printer-Subscriptions /
D [13/Nov/2017:16:31:57 +0100] create_subscriptions(con=0x55efabf43ee0(1), uri="/")
D [13/Nov/2017:16:31:57 +0100] pullmethod="ippget"
D [13/Nov/2017:16:31:57 +0100] notify-lease-duration=86400
D [13/Nov/2017:16:31:57 +0100] notify-time-interval=60
D [13/Nov/2017:16:31:57 +0100] cupsdAddSubscription(mask=7ff, dest=(nil)(), job=(nil)(0), uri="(null)")
D [13/Nov/2017:16:31:57 +0100] Added subscription #220 for server.
D [13/Nov/2017:16:31:57 +0100] cupsdMarkDirty(----S)
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [13/Nov/2017:16:31:57 +0100] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [13/Nov/2017:16:31:57 +0100] [Client 1] Content-Length: 107
D [13/Nov/2017:16:31:57 +0100] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:31:57 +0100] [Client 1] con->http=0x55efabf450a0
D [13/Nov/2017:16:31:57 +0100] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55efabe82580(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:31:57 +0100] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:31:57 +0100] [Client 1] bytes=0, http_state=0, data_remaining=107
D [13/Nov/2017:16:31:57 +0100] [Client 1] Flushing write buffer.
D [13/Nov/2017:16:31:57 +0100] [Client 1] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:31:57 +0100] [Client 1] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 2] Accepted from localhost (Domain)
D [13/Nov/2017:16:31:57 +0100] [Client 2] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] [Client 2] POST / HTTP/1.1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 2] Read: status=200
D [13/Nov/2017:16:31:57 +0100] [Client 2] No authentication data provided.
D [13/Nov/2017:16:31:57 +0100] [Client 2] 2.0 CUPS-Get-Printers 2
D [13/Nov/2017:16:31:57 +0100] CUPS-Get-Printers
D [13/Nov/2017:16:31:57 +0100] [Client 2] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost
D [13/Nov/2017:16:31:57 +0100] [Client 2] Content-Length: 1109
D [13/Nov/2017:16:31:57 +0100] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:31:57 +0100] [Client 2] con->http=0x55efabf49470
D [13/Nov/2017:16:31:57 +0100] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1109, response=0x55efabf41b30(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:31:57 +0100] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:31:57 +0100] [Client 2] bytes=0, http_state=0, data_remaining=1109
D [13/Nov/2017:16:31:57 +0100] [Client 2] Flushing write buffer.
D [13/Nov/2017:16:31:57 +0100] [Client 2] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:31:57 +0100] [Client 2] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 2] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:31:57 +0100] [Client 2] Closing connection.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 3] Accepted from localhost (Domain)
D [13/Nov/2017:16:31:57 +0100] [Client 3] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] [Client 3] POST / HTTP/1.1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 3] Read: status=200
D [13/Nov/2017:16:31:57 +0100] [Client 3] No authentication data provided.
D [13/Nov/2017:16:31:57 +0100] [Client 3] 2.0 CUPS-Get-Default 3
D [13/Nov/2017:16:31:57 +0100] CUPS-Get-Default
D [13/Nov/2017:16:31:57 +0100] [Client 3] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [13/Nov/2017:16:31:57 +0100] [Client 3] Content-Length: 12910
D [13/Nov/2017:16:31:57 +0100] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:31:57 +0100] [Client 3] con->http=0x55efabf482b0
D [13/Nov/2017:16:31:57 +0100] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12910, response=0x55efabf3ece0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:31:57 +0100] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:31:57 +0100] [Client 3] bytes=0, http_state=0, data_remaining=12910
D [13/Nov/2017:16:31:57 +0100] [Client 3] Flushing write buffer.
D [13/Nov/2017:16:31:57 +0100] [Client 3] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:31:57 +0100] [Client 3] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:31:57 +0100] [Client 3] Closing connection.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 4] Accepted from localhost (Domain)
D [13/Nov/2017:16:31:57 +0100] [Client 4] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] [Client 4] POST / HTTP/1.1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 4] Read: status=200
D [13/Nov/2017:16:31:57 +0100] [Client 4] No authentication data provided.
D [13/Nov/2017:16:31:57 +0100] [Client 4] 2.0 CUPS-Get-Default 4
D [13/Nov/2017:16:31:57 +0100] CUPS-Get-Default
D [13/Nov/2017:16:31:57 +0100] [Client 4] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost
D [13/Nov/2017:16:31:57 +0100] [Client 4] Content-Length: 12910
D [13/Nov/2017:16:31:57 +0100] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:31:57 +0100] [Client 4] con->http=0x55efabf482b0
D [13/Nov/2017:16:31:57 +0100] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12910, response=0x55efabf3ece0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:31:57 +0100] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:31:57 +0100] [Client 4] bytes=0, http_state=0, data_remaining=12910
D [13/Nov/2017:16:31:57 +0100] [Client 4] Flushing write buffer.
D [13/Nov/2017:16:31:57 +0100] [Client 4] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:31:57 +0100] [Client 4] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:31:57 +0100] [Client 4] Closing connection.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 5] Accepted from localhost (Domain)
D [13/Nov/2017:16:31:57 +0100] [Client 5] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] [Client 5] POST / HTTP/1.1
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 5] Read: status=200
D [13/Nov/2017:16:31:57 +0100] [Client 5] No authentication data provided.
D [13/Nov/2017:16:31:57 +0100] [Client 5] 2.0 Create-Printer-Subscriptions 5
D [13/Nov/2017:16:31:57 +0100] Create-Printer-Subscriptions /
D [13/Nov/2017:16:31:57 +0100] create_subscriptions(con=0x55efabf4c8a0(5), uri="/")
D [13/Nov/2017:16:31:57 +0100] recipient="dbus://"
D [13/Nov/2017:16:31:57 +0100] notify-lease-duration=86400
D [13/Nov/2017:16:31:57 +0100] notify-time-interval=0
D [13/Nov/2017:16:31:57 +0100] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [13/Nov/2017:16:31:57 +0100] Added subscription #221 for server.
D [13/Nov/2017:16:31:57 +0100] cupsdMarkDirty(----S)
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:31:57 +0100] [Client 5] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost
D [13/Nov/2017:16:31:57 +0100] [Client 5] Content-Length: 107
D [13/Nov/2017:16:31:57 +0100] [Client 5] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:31:57 +0100] [Client 5] con->http=0x55efabf482b0
D [13/Nov/2017:16:31:57 +0100] [Client 5] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55efabe82500(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:31:57 +0100] [Client 5] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:31:57 +0100] [Client 5] bytes=0, http_state=0, data_remaining=107
D [13/Nov/2017:16:31:57 +0100] [Client 5] Flushing write buffer.
D [13/Nov/2017:16:31:57 +0100] [Client 5] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:31:57 +0100] [Client 5] Waiting for request.
D [13/Nov/2017:16:31:57 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [13/Nov/2017:16:31:58 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:14 +0100] [Client 6] Accepted from localhost (Domain)
D [13/Nov/2017:16:32:14 +0100] [Client 6] Waiting for request.
I [13/Nov/2017:16:32:14 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:14 +0100] [Client 7] Accepted from localhost (Domain)
D [13/Nov/2017:16:32:14 +0100] [Client 7] Waiting for request.
D [13/Nov/2017:16:32:14 +0100] [Client 7] POST / HTTP/1.1
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=200
D [13/Nov/2017:16:32:14 +0100] [Client 7] No authentication data provided.
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] Read: status=100
D [13/Nov/2017:16:32:14 +0100] [Client 7] 2.0 Get-Job-Attributes 1
D [13/Nov/2017:16:32:14 +0100] Get-Job-Attributes ipp://localhost/jobs/41
D [13/Nov/2017:16:32:14 +0100] [Client 7] Returning IPP successful-ok for Get-Job-Attributes (ipp://localhost/jobs/41) from localhost
D [13/Nov/2017:16:32:14 +0100] [Client 7] Content-Length: 75
D [13/Nov/2017:16:32:14 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:32:14 +0100] [Client 7] con->http=0x55efabf54a40
D [13/Nov/2017:16:32:14 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55efabe824d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:32:14 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:32:14 +0100] [Client 7] bytes=0, http_state=0, data_remaining=75
D [13/Nov/2017:16:32:14 +0100] [Client 7] Flushing write buffer.
D [13/Nov/2017:16:32:14 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:32:14 +0100] [Client 7] Waiting for request.
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:14 +0100] [Client 6] POST /jobs/ HTTP/1.1
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:32:14 +0100] [Client 6] Read: status=200
D [13/Nov/2017:16:32:14 +0100] [Client 6] No authentication data provided.
D [13/Nov/2017:16:32:14 +0100] [Client 6] 2.0 Cancel-Job 35
D [13/Nov/2017:16:32:14 +0100] Cancel-Job ipp://localhost/jobs/41
D [13/Nov/2017:16:32:14 +0100] cupsdIsAuthorized: requesting-user-name="tata"
D [13/Nov/2017:16:32:14 +0100] [Job 41] time-at-completed=1510587134
D [13/Nov/2017:16:32:14 +0100] Notifier dbus started - PID = 2968
D [13/Nov/2017:16:32:14 +0100] cupsdMarkDirty(----S)
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [13/Nov/2017:16:32:14 +0100] [Job 41] Job canceled by \"tata\"
I [13/Nov/2017:16:32:14 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:14 +0100] cupsdMarkDirty(---J-)
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [13/Nov/2017:16:32:14 +0100] [Job 41] Canceled by "tata".
D [13/Nov/2017:16:32:14 +0100] [Client 6] Returning IPP successful-ok for Cancel-Job (ipp://localhost/jobs/41) from localhost
D [13/Nov/2017:16:32:14 +0100] [Client 6] Content-Length: 75
D [13/Nov/2017:16:32:14 +0100] [Client 6] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:32:14 +0100] [Job 41] Removing document files.
D [13/Nov/2017:16:32:14 +0100] cupsdMarkDirty(---J-)
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:14 +0100] [Client 6] con->http=0x55efabf50670
D [13/Nov/2017:16:32:14 +0100] [Client 6] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55efabf4c790(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:32:14 +0100] [Client 6] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:32:14 +0100] [Client 6] bytes=0, http_state=0, data_remaining=75
D [13/Nov/2017:16:32:14 +0100] [Client 6] Flushing write buffer.
D [13/Nov/2017:16:32:14 +0100] [Client 6] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:32:14 +0100] [Client 6] Waiting for request.
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:14 +0100] [Notifier] state=3
D [13/Nov/2017:16:32:14 +0100] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:32:14 +0100] [Client 6] Closing connection.
D [13/Nov/2017:16:32:14 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [13/Nov/2017:16:32:14 +0100] [Notifier] Connected to D-BUS
D [13/Nov/2017:16:32:14 +0100] [Notifier] JobCompleted
D [13/Nov/2017:16:32:15 +0100] [Client 8] Accepted from localhost (Domain)
D [13/Nov/2017:16:32:15 +0100] [Client 8] Waiting for request.
I [13/Nov/2017:16:32:15 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:15 +0100] [Client 8] POST / HTTP/1.1
D [13/Nov/2017:16:32:15 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:32:15 +0100] [Client 8] Read: status=200
D [13/Nov/2017:16:32:15 +0100] [Client 8] No authentication data provided.
D [13/Nov/2017:16:32:15 +0100] [Client 8] 2.0 Get-Notifications 36
D [13/Nov/2017:16:32:15 +0100] Get-Notifications /
D [13/Nov/2017:16:32:15 +0100] cupsdIsAuthorized: requesting-user-name="tata"
D [13/Nov/2017:16:32:15 +0100] [Client 8] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [13/Nov/2017:16:32:15 +0100] [Client 8] Content-Length: 690
D [13/Nov/2017:16:32:15 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:32:15 +0100] [Client 8] con->http=0x55efabf50670
D [13/Nov/2017:16:32:15 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=690, response=0x55efabf58670(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:32:15 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:32:15 +0100] [Client 8] bytes=0, http_state=0, data_remaining=690
D [13/Nov/2017:16:32:15 +0100] [Client 8] Flushing write buffer.
D [13/Nov/2017:16:32:15 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:32:15 +0100] [Client 8] Waiting for request.
D [13/Nov/2017:16:32:15 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:15 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:32:15 +0100] [Client 8] Closing connection.
D [13/Nov/2017:16:32:15 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [13/Nov/2017:16:32:16 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:18 +0100] [Client 9] Accepted from localhost (Domain)
D [13/Nov/2017:16:32:18 +0100] [Client 9] Waiting for request.
I [13/Nov/2017:16:32:18 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:18 +0100] [Client 9] POST / HTTP/1.1
D [13/Nov/2017:16:32:18 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=200
D [13/Nov/2017:16:32:18 +0100] [Client 9] No authentication data provided.
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] Read: status=100
D [13/Nov/2017:16:32:18 +0100] [Client 9] 2.0 Cancel-Subscription 48
D [13/Nov/2017:16:32:18 +0100] Cancel-Subscription /
D [13/Nov/2017:16:32:18 +0100] cupsdIsAuthorized: requesting-user-name="tata"
D [13/Nov/2017:16:32:18 +0100] cupsdMarkDirty(----S)
D [13/Nov/2017:16:32:18 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:18 +0100] [Client 9] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D [13/Nov/2017:16:32:18 +0100] [Client 9] Content-Length: 75
D [13/Nov/2017:16:32:18 +0100] [Client 9] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:32:18 +0100] [Client 9] con->http=0x55efabf50670
D [13/Nov/2017:16:32:18 +0100] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55efabe824d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:32:18 +0100] [Client 9] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:32:18 +0100] [Client 9] bytes=0, http_state=0, data_remaining=75
D [13/Nov/2017:16:32:18 +0100] [Client 9] Flushing write buffer.
D [13/Nov/2017:16:32:18 +0100] [Client 9] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:32:18 +0100] [Client 9] Waiting for request.
D [13/Nov/2017:16:32:18 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [13/Nov/2017:16:32:18 +0100] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:32:18 +0100] [Client 9] Closing connection.
D [13/Nov/2017:16:32:18 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [13/Nov/2017:16:32:19 +0100] Expiring subscriptions...
I [13/Nov/2017:16:32:28 +0100] Saving job.cache...
I [13/Nov/2017:16:32:28 +0100] Saving subscriptions.conf...
D [13/Nov/2017:16:32:28 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [13/Nov/2017:16:32:28 +0100] Expiring subscriptions...
D [13/Nov/2017:16:32:45 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:32:45 +0100] [Client 7] Closing connection.
D [13/Nov/2017:16:32:45 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:32:45 +0100] Expiring subscriptions...
I [13/Nov/2017:16:32:46 +0100] Expiring subscriptions...
I [13/Nov/2017:16:36:58 +0100] Expiring subscriptions...
D [13/Nov/2017:16:36:58 +0100] [Job 41] Unloading...
D [13/Nov/2017:16:36:58 +0100] cupsdAddCert: Adding certificate for PID 0
D [13/Nov/2017:16:36:58 +0100] Closing client 1 after 300 seconds of inactivity.
D [13/Nov/2017:16:36:58 +0100] [Client 1] Closing connection.
D [13/Nov/2017:16:36:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Nov/2017:16:36:58 +0100] Closing client 5 after 300 seconds of inactivity.
D [13/Nov/2017:16:36:58 +0100] [Client 5] Closing connection.
D [13/Nov/2017:16:36:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [13/Nov/2017:16:36:58 +0100] Report: clients=0
D [13/Nov/2017:16:36:58 +0100] Report: jobs=2
D [13/Nov/2017:16:36:58 +0100] Report: jobs-active=0
D [13/Nov/2017:16:36:58 +0100] Report: printers=1
D [13/Nov/2017:16:36:58 +0100] Report: stringpool-string-count=8816
D [13/Nov/2017:16:36:58 +0100] Report: stringpool-alloc-bytes=10984
D [13/Nov/2017:16:36:58 +0100] Report: stringpool-total-bytes=168088
D [13/Nov/2017:16:50:53 +0100] [Client 10] Accepted from localhost:51212 (IPv4)
D [13/Nov/2017:16:50:53 +0100] [Client 10] Waiting for request.
I [13/Nov/2017:16:50:53 +0100] Expiring subscriptions...
D [13/Nov/2017:16:50:53 +0100] cupsdAddCert: Adding certificate for PID 0
D [13/Nov/2017:16:50:53 +0100] Report: clients=1
D [13/Nov/2017:16:50:53 +0100] Report: jobs=2
D [13/Nov/2017:16:50:53 +0100] Report: jobs-active=0
D [13/Nov/2017:16:50:53 +0100] Report: printers=1
D [13/Nov/2017:16:50:53 +0100] Report: stringpool-string-count=8816
D [13/Nov/2017:16:50:53 +0100] Report: stringpool-alloc-bytes=10984
D [13/Nov/2017:16:50:53 +0100] Report: stringpool-total-bytes=168088
I [13/Nov/2017:16:50:54 +0100] Expiring subscriptions...
D [13/Nov/2017:16:50:58 +0100] [Client 10] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:50:58 +0100] [Client 10] Closing connection.
D [13/Nov/2017:16:50:58 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:50:58 +0100] Expiring subscriptions...
D [13/Nov/2017:16:50:58 +0100] [Client 11] Accepted from localhost:51214 (IPv4)
D [13/Nov/2017:16:50:58 +0100] [Client 11] Waiting for request.
I [13/Nov/2017:16:50:59 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:03 +0100] [Client 11] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:03 +0100] [Client 11] Closing connection.
D [13/Nov/2017:16:51:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:51:03 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:04 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:07 +0100] [Client 12] Accepted from localhost:51216 (IPv4)
D [13/Nov/2017:16:51:07 +0100] [Client 12] Waiting for request.
I [13/Nov/2017:16:51:07 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:08 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:12 +0100] [Client 12] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:12 +0100] [Client 12] Closing connection.
D [13/Nov/2017:16:51:12 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:51:12 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:13 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:15 +0100] [Client 13] Accepted from localhost:51218 (IPv4)
D [13/Nov/2017:16:51:15 +0100] [Client 13] Waiting for request.
I [13/Nov/2017:16:51:15 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:16 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:18 +0100] [Client 13] GET /admin HTTP/1.1
D [13/Nov/2017:16:51:18 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Nov/2017:16:51:18 +0100] [Client 13] Read: status=200
D [13/Nov/2017:16:51:18 +0100] [Client 13] No authentication data provided.
D [13/Nov/2017:16:51:18 +0100] [Client 13] Processing GET /admin
D [13/Nov/2017:16:51:18 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@Tata-Mint"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.1.3"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[13] = "USER=root"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[15] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[18] = "LANG=pl.UTF8"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/admin"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[27] = "SERVER_PROTOCOL=HTTP/1.1"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:56.0) Gecko/20100101 Firefox/56.0"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[29] = "HTTP_REFERER=http://localhost:631/"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[30] = "REQUEST_METHOD=GET"
D [13/Nov/2017:16:51:18 +0100] [CGI] envp[31] = "QUERY_STRING="
D [13/Nov/2017:16:51:18 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 3798)
I [13/Nov/2017:16:51:18 +0100] [Client 13] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=3798, file=18)
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
I [13/Nov/2017:16:51:18 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:18 +0100] [CGI] admin.cgi started...
D [13/Nov/2017:16:51:18 +0100] [Client 14] Accepted from localhost (Domain)
D [13/Nov/2017:16:51:18 +0100] [Client 14] Waiting for request.
D [13/Nov/2017:16:51:18 +0100] [CGI] http=0x55d4a9f03b70
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SECTION=\"admin\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [13/Nov/2017:16:51:18 +0100] [CGI] org.cups.sid cookie not found, initializing!
D [13/Nov/2017:16:51:18 +0100] [CGI] org.cups.sid cookie is \"cefd1dcd0502adafb3aecba5f4a8b008\"
D [13/Nov/2017:16:51:18 +0100] [CGI] No form data, showing main menu...
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: DEBUG_LOGGING=\"CHECKED\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SHARE_PRINTERS=\"CHECKED\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: HAVE_GSSAPI=\"1\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: KERBEROS=\"\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: PRESERVE_JOBS=\"CHECKED\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: PRESERVE_JOB_HISTORY=\"Yes\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: PRESERVE_JOB_FILES=\"1d\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: MAX_CLIENTS=\"100\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: MAX_JOBS=\"500\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: MAX_LOG_SIZE=\"0\"
D [13/Nov/2017:16:51:18 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [13/Nov/2017:16:51:18 +0100] [Client 14] POST / HTTP/1.1
D [13/Nov/2017:16:51:18 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [13/Nov/2017:16:51:18 +0100] [Client 14] Read: status=200
D [13/Nov/2017:16:51:18 +0100] [Client 14] No authentication data provided.
D [13/Nov/2017:16:51:18 +0100] [Client 14] 2.0 Get-Subscriptions 1
D [13/Nov/2017:16:51:18 +0100] Get-Subscriptions ipp://localhost/
I [13/Nov/2017:16:51:18 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:18 +0100] [Client 14] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
D [13/Nov/2017:16:51:18 +0100] [Client 14] Content-Length: 530
D [13/Nov/2017:16:51:18 +0100] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [13/Nov/2017:16:51:18 +0100] [Client 14] con->http=0x55efabf54a40
D [13/Nov/2017:16:51:18 +0100] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=530, response=0x55efabf3ece0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [13/Nov/2017:16:51:18 +0100] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [13/Nov/2017:16:51:18 +0100] [Client 14] bytes=0, http_state=0, data_remaining=530
D [13/Nov/2017:16:51:18 +0100] [Client 14] Flushing write buffer.
D [13/Nov/2017:16:51:18 +0100] [Client 14] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:51:18 +0100] [Client 14] Waiting for request.
D [13/Nov/2017:16:51:18 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_lease_duration[0]=\"86400\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_time_interval[0]=\"0\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_subscription_id[0]=\"208\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_lease_duration[1]=\"86400\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_time_interval[1]=\"0\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_subscription_id[1]=\"219\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_lease_duration[2]=\"86400\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_time_interval[2]=\"60\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_subscription_id[2]=\"220\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_events[3]=\"all\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_lease_duration[3]=\"86400\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_recipient_uri[3]=\"dbus://\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_recipient_name[3]=\"/\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_subscriber_user_name[3]=\"anonymous\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_time_interval[3]=\"0\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetArray: notify_subscription_id[3]=\"221\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: TITLE=\"Administration\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [13/Nov/2017:16:51:18 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.1.3\"
D [13/Nov/2017:16:51:18 +0100] [Client 13] CGI data ready to be sent.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] Script header: Set-Cookie: org.cups.sid=cefd1dcd0502adafb3aecba5f4a8b008; path=/; httponly;
D [13/Nov/2017:16:51:18 +0100] [Client 13] Script header: Content-Type: text/html;charset=utf-8
D [13/Nov/2017:16:51:18 +0100] [Client 13] Script header: 
D [13/Nov/2017:16:51:18 +0100] [Client 13] Sending status 200 for CGI.
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] CGI data ready to be sent.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] CGI data ready to be sent.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] PID 3798 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] CGI data ready to be sent.
D [13/Nov/2017:16:51:18 +0100] [Client 14] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:18 +0100] [Client 14] Closing connection.
D [13/Nov/2017:16:51:18 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] CGI data ready to be sent.
D [13/Nov/2017:16:51:18 +0100] [Client 13] con->http=0x55efabf50670
D [13/Nov/2017:16:51:18 +0100] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=3798, file=18
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for CGI data.
D [13/Nov/2017:16:51:18 +0100] [Client 13] Sending 0-length chunk.
D [13/Nov/2017:16:51:18 +0100] [Client 13] Flushing write buffer.
D [13/Nov/2017:16:51:18 +0100] [Client 13] New state is HTTP_STATE_WAITING
D [13/Nov/2017:16:51:18 +0100] [Client 13] Waiting for request.
D [13/Nov/2017:16:51:18 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I [13/Nov/2017:16:51:19 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:29 +0100] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:29 +0100] [Client 13] Closing connection.
D [13/Nov/2017:16:51:29 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:51:29 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:30 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:33 +0100] [Client 15] Accepted from localhost:51220 (IPv4)
D [13/Nov/2017:16:51:33 +0100] [Client 15] Waiting for request.
I [13/Nov/2017:16:51:33 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:34 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:38 +0100] [Client 15] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:38 +0100] [Client 15] Closing connection.
D [13/Nov/2017:16:51:38 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:51:38 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:39 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:47 +0100] [Client 16] Accepted from localhost:51226 (IPv4)
D [13/Nov/2017:16:51:47 +0100] [Client 16] Waiting for request.
I [13/Nov/2017:16:51:47 +0100] Expiring subscriptions...
I [13/Nov/2017:16:51:48 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:53 +0100] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [13/Nov/2017:16:51:53 +0100] [Client 16] Closing connection.
D [13/Nov/2017:16:51:53 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [13/Nov/2017:16:51:53 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:53 +0100] Report: clients=0
D [13/Nov/2017:16:51:53 +0100] Report: jobs=2
D [13/Nov/2017:16:51:53 +0100] Report: jobs-active=0
D [13/Nov/2017:16:51:53 +0100] Report: printers=1
D [13/Nov/2017:16:51:53 +0100] Report: stringpool-string-count=8816
D [13/Nov/2017:16:51:53 +0100] Report: stringpool-alloc-bytes=10984
D [13/Nov/2017:16:51:53 +0100] Report: stringpool-total-bytes=168088
I [13/Nov/2017:16:51:54 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:59 +0100] [Client 17] Accepted from localhost:51228 (IPv4)
D [13/Nov/2017:16:51:59 +0100] [Client 17] Waiting for request.
I [13/Nov/2017:16:51:59 +0100] Expiring subscriptions...
D [13/Nov/2017:16:51:59 +0100] [Client 17] GET /admin/log/error_log HTTP/1.1
D [13/Nov/2017:16:51:59 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Nov/2017:16:51:59 +0100] [Client 17] Read: status=200
D [13/Nov/2017:16:51:59 +0100] [Client 17] No authentication data provided.
D [13/Nov/2017:16:51:59 +0100] cupsdIsAuthorized: username=""
D [13/Nov/2017:16:51:59 +0100] [Client 17] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [13/Nov/2017:16:51:59 +0100] [Client 17] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [13/Nov/2017:16:51:59 +0100] [Client 17] Closing connection.
D [13/Nov/2017:16:51:59 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
I [13/Nov/2017:16:52:00 +0100] Expiring subscriptions...
D [13/Nov/2017:16:52:01 +0100] [Client 18] Accepted from localhost:51230 (IPv4)
D [13/Nov/2017:16:52:01 +0100] [Client 18] Waiting for request.
I [13/Nov/2017:16:52:01 +0100] Expiring subscriptions...
D [13/Nov/2017:16:52:01 +0100] [Client 18] GET /admin/log/error_log HTTP/1.1
D [13/Nov/2017:16:52:01 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [13/Nov/2017:16:52:01 +0100] [Client 18] Read: status=200
D [13/Nov/2017:16:52:01 +0100] [Client 18] Authorized as "tata" using Basic.
D [13/Nov/2017:16:52:01 +0100] cupsdIsAuthorized: username="tata"
D [13/Nov/2017:16:52:01 +0100] [Client 18] Processing GET /admin/log/error_log
Nie jestem pewien czy wszystko jest tak jak chciałeś, bedę gotowy w każdej chwili aby coś poprawić albo dodać.
Załączniki
logidebug.txt
(39.79 KiB) Pobrany 10 razy
dmesg.txt
(56.21 KiB) Pobrany 14 razy
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 15 lis 2017, 17:50

Wygląda na to, że AppArmor blokuje dostęp do sterownika drukarki

Kod: Zaznacz cały

[  247.796646] audit: type=1400 audit(1510587030.072:15): apparmor="DENIED" operation="exec" profile="/usr/sbin/cupsd" name="/usr/local/lexmark/v3/bin/printfilter" pid=2569 comm="cups-exec" requested_mask="x" denied_mask="x" fsuid=7 ouid=0
Odejściem problemu może być to https://askubuntu.com/questions/645636/ ... ed-in-logs
Ale to wyłączy całą ochronę dla procesu cups, więc lepiej by było poprawić politykę AppArmor aby zezwalała na użycie tego konkretnego sterownika.
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 15 lis 2017, 19:54

Tak sprawdziło się zgodnie tym co pisałeś.
Wyłączyłem tę ochronę i drukarka zadziałała po czym ją przywróciłem.
Po przywróceniu ochrony problem powrócił.
Co dalej, czekać aż błąd zostanie rozwiązany przez społeczność ?

Czy razem spróbujemy? Mogę podrzucać te zapisy z plików jak opisywano w linku.
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 7222
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: mario_7 » 16 lis 2017, 17:24

Możesz spróbować naprawić regułki apparmor:

Kod: Zaznacz cały

sudo gedit /etc/apparmor.d/usr.sbin.cupsd
Znajdź taki fragment:

Kod: Zaznacz cały

# FIXME: no policy ATM for hplip and Brother drivers
  /usr/bin/hpijs Cx -> third_party,
  /usr/Brother/** Cx -> third_party,
i dodaj po nim taką nową linijkę:

Kod: Zaznacz cały

 /usr/local/lexmark/** Cx -> third_party,
Zapisz plik a następnie każ wczytać nowe reguły i uruchom ponownie usługę cups:

Kod: Zaznacz cały

sudo apparmor_parser -r /etc/apparmor.d/usr.sbin.cupsd
sudo service cups restart
Jest poprawa?
Jeśli dalej nie działa, to dla pewności uruchom system ponownie i sprawdź jeszcze raz.
Jeśli mimo wszystko nie działa, to pokaż jak wyglądają teraz logi.
Czytelnia - poczytaj, Google - poszukaj
_ziut
Sędziwy Jeż
Sędziwy Jeż
Posty: 82
Rejestracja: 22 lis 2011, 19:58
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: XFCE
Architektura: x86_64

Re: zainstalowanie Lexmark Prospekt Pro205 pod 16.04

Post autor: _ziut » 17 lis 2017, 00:45

Dzięki za "łopatologiczne" pokierowanie.
Ale dla takich nisko wtajemniczonych jak ja, to w sam raz.
Drukarka działa, jednak z tą różnicą że jakby coś blokowało informację zwrotną od drukarki- na wcześniejszych wersjach 14.04, 12. 04, i mojej pierwszej chyba 10... pojawiało się okno (pasek) od drukarki o przebiegu wydruku, braku papieru itp..

Prawdopodobnie coś jest nie tak z poleceniem:

Kod: Zaznacz cały

sudo restart cups
dałem w to miejsce:

Kod: Zaznacz cały

sudo service cups restart
Sprawdziłem również w 14 usr.sbin.cupsd , czy jest i jak wygląda ten fragment:
jest i wyglada tak:

Kod: Zaznacz cały

# FIXME: no policy ATM for hplip and Brother drivers
  /usr/bin/hpijs Ux,
  /usr/Brother/** Ux,
Administratorze wielkie dzięki.

Temat chyba do zamknięcia.
ODPOWIEDZ

Wróć do „Multimedia - karty graficzne, dźwiękowe, telewizyjne, drukarki, skanery”