nie mogę się wylogować po instalacji Unity8

Tematy specyficzne dla poszczególnych window managerów: KDE, GNOME, XFCE, Fluxbox, Blackbox, IceWM, WindowMaker, itd. - wszystko tutaj.
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

nie mogę się wylogować po instalacji Unity8

Post autor: Donieck »

Mam Ubuntu 16.04 z jądrem hwe i Xorg hwe. Pojawia mi się błęðna konfiguracja karty graficznej. Tak jest w logach Xorg:

Kod: Zaznacz cały

[    57.153] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    57.153] X Protocol Version 11, Revision 0
[    57.153] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[    57.153] Current Operating System: Linux daniel-Lenovo-G50-30 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64
[    57.153] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic root=UUID=0f9b0050-df80-438f-a95c-7c4fc90e0b0f ro quiet splash acpi_osi=Linux acpi_backlight=vendor acpi_osi=Linux pcie_aspm=powersave pcie_aspm=force panic=30 vt.handoff=7
[    57.153] Build Date: 24 November 2017  09:44:25AM
[    57.153] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    57.153] Current version of pixman: 0.33.6
[    57.153] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    57.153] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    57.154] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 28 17:36:18 2018
[    57.244] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    57.245] (==) No Layout section.  Using the first Screen section.
[    57.245] (==) No screen section available. Using defaults.
[    57.245] (**) |-->Screen "Default Screen Section" (0)
[    57.245] (**) |   |-->Monitor "<default monitor>"
[    57.245] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    57.245] (==) Automatically adding devices
[    57.245] (==) Automatically enabling devices
[    57.245] (==) Automatically adding GPU devices
[    57.245] (==) Automatically binding GPU devices
[    57.245] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    57.245] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    57.245] 	Entry deleted from font path.
[    57.245] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    57.245] 	Entry deleted from font path.
[    57.245] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    57.245] 	Entry deleted from font path.
[    57.245] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    57.245] 	Entry deleted from font path.
[    57.246] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    57.246] 	Entry deleted from font path.
[    57.246] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    57.246] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    57.246] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    57.246] (II) Loader magic: 0x55d53805ce00
[    57.246] (II) Module ABI versions:
[    57.246] 	X.Org ANSI C Emulation: 0.4
[    57.246] 	X.Org Video Driver: 23.0
[    57.246] 	X.Org XInput driver : 24.1
[    57.246] 	X.Org Server Extension : 10.0
[    57.248] (++) using VT number 7

[    57.248] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    57.250] (II) xfree86: Adding drm device (/dev/dri/card0)
[    57.256] (--) PCI:*(0:0:2:0) 8086:0f31:17aa:3905 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8, BIOS @ 0x????????/131072
[    57.256] (II) LoadModule: "glx"
[    57.404] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    58.038] (II) Module glx: vendor="X.Org Foundation"
[    58.038] 	compiled for 1.19.5, module version = 1.0.0
[    58.038] 	ABI class: X.Org Server Extension, version 10.0
[    58.038] (==) Matched modesetting as autoconfigured driver 0
[    58.038] (==) Matched fbdev as autoconfigured driver 1
[    58.038] (==) Matched vesa as autoconfigured driver 2
[    58.038] (==) Assigned the driver to the xf86ConfigLayout
[    58.038] (II) LoadModule: "modesetting"
[    58.038] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    58.039] (II) Module modesetting: vendor="X.Org Foundation"
[    58.039] 	compiled for 1.19.5, module version = 1.19.5
[    58.039] 	Module class: X.Org Video Driver
[    58.039] 	ABI class: X.Org Video Driver, version 23.0
[    58.039] (II) LoadModule: "fbdev"
[    58.039] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    58.039] (II) Module fbdev: vendor="X.Org Foundation"
[    58.039] 	compiled for 1.19.3, module version = 0.4.4
[    58.039] 	Module class: X.Org Video Driver
[    58.039] 	ABI class: X.Org Video Driver, version 23.0
[    58.039] (II) LoadModule: "vesa"
[    58.040] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    58.040] (II) Module vesa: vendor="X.Org Foundation"
[    58.040] 	compiled for 1.19.3, module version = 2.3.4
[    58.040] 	Module class: X.Org Video Driver
[    58.040] 	ABI class: X.Org Video Driver, version 23.0
[    58.040] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    58.040] (II) FBDEV: driver for framebuffer: fbdev
[    58.040] (II) VESA: driver for VESA chipsets: vesa
[    58.054] (II) modeset(0): using drv /dev/dri/card0
[    58.054] (WW) Falling back to old probe method for fbdev
[    58.054] (II) Loading sub module "fbdevhw"
[    58.054] (II) LoadModule: "fbdevhw"
[    58.055] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    58.055] (II) Module fbdevhw: vendor="X.Org Foundation"
[    58.055] 	compiled for 1.19.5, module version = 0.0.2
[    58.055] 	ABI class: X.Org Video Driver, version 23.0
[    58.055] (WW) Falling back to old probe method for vesa
[    58.055] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    58.055] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    58.055] (==) modeset(0): RGB weight 888
[    58.055] (==) modeset(0): Default visual is TrueColor
[    58.055] (II) Loading sub module "glamoregl"
[    58.055] (II) LoadModule: "glamoregl"
[    58.056] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    58.303] (II) Module glamoregl: vendor="X.Org Foundation"
[    58.303] 	compiled for 1.19.5, module version = 1.0.0
[    58.303] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    58.303] (II) glamor: OpenGL accelerated X.org driver based.
[    58.509] (II) glamor: EGL version 1.4 (DRI2):
[    58.550] (II) modeset(0): glamor initialized
[    58.552] (II) modeset(0): Output eDP-1 has no monitor section
[    58.563] (II) modeset(0): Output VGA-1 has no monitor section
[    58.563] (II) modeset(0): Output DP-1 has no monitor section
[    58.572] (II) modeset(0): Output HDMI-1 has no monitor section
[    58.574] (II) modeset(0): EDID for output eDP-1
[    58.574] (II) modeset(0): Manufacturer: AUO  Model: 40ec  Serial#: 0
[    58.574] (II) modeset(0): Year: 2013  Week: 41
[    58.574] (II) modeset(0): EDID Version: 1.4
[    58.574] (II) modeset(0): Digital Display Input
[    58.574] (II) modeset(0): 6 bits per channel
[    58.574] (II) modeset(0): Digital interface is DisplayPort
[    58.574] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    58.574] (II) modeset(0): Gamma: 2.20
[    58.574] (II) modeset(0): No DPMS capabilities specified
[    58.574] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    58.574] (II) modeset(0): First detailed timing is preferred mode
[    58.574] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    58.574] (II) modeset(0): redX: 0.580 redY: 0.335   greenX: 0.330 greenY: 0.565
[    58.574] (II) modeset(0): blueX: 0.155 blueY: 0.140   whiteX: 0.313 whiteY: 0.329
[    58.574] (II) modeset(0): Manufacturer's mask: 0
[    58.574] (II) modeset(0): Supported detailed timing:
[    58.574] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 193 mm
[    58.574] (II) modeset(0): h_active: 1366  h_sync: 1374  h_sync_end 1384 h_blank_end 1558 h_border: 0
[    58.574] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 772 v_blanking: 816 v_border: 0
[    58.574] (II) modeset(0): Unknown vendor-specific block f
[    58.574] (II) modeset(0):  AUO
[    58.574] (II) modeset(0):  B156XTN04.0
[    58.574] (II) modeset(0): EDID (in hex):
[    58.574] (II) modeset(0): 	00ffffffffffff0006afec4000000000
[    58.574] (II) modeset(0): 	291701049522137802bbf59455549027
[    58.574] (II) modeset(0): 	23505400000001010101010101010101
[    58.574] (II) modeset(0): 	010101010101ce1d56c050003030080a
[    58.574] (II) modeset(0): 	310058c1100000180000000f00000000
[    58.574] (II) modeset(0): 	00000000000000000020000000fe0041
[    58.574] (II) modeset(0): 	554f0a202020202020202020000000fe
[    58.574] (II) modeset(0): 	004231353658544e30342e30200a00ee
[    58.575] (II) modeset(0): Printing probed modes for output eDP-1
[    58.575] (II) modeset(0): Modeline "1366x768"x60.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    58.575] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    58.575] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    58.575] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    58.575] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    58.575] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    58.575] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    58.575] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    58.575] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    58.575] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    58.575] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    58.575] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    58.575] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    58.575] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    58.575] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    58.575] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    58.575] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    58.575] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    58.575] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    58.575] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    58.575] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    58.575] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    58.575] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    58.575] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    58.575] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    58.575] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    58.575] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    58.575] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    58.587] (II) modeset(0): EDID for output VGA-1
[    58.587] (II) modeset(0): EDID for output DP-1
[    58.595] (II) modeset(0): EDID for output HDMI-1
[    58.595] (II) modeset(0): Output eDP-1 connected
[    58.595] (II) modeset(0): Output VGA-1 disconnected
[    58.595] (II) modeset(0): Output DP-1 disconnected
[    58.595] (II) modeset(0): Output HDMI-1 disconnected
[    58.595] (II) modeset(0): Using exact sizes for initial modes
[    58.595] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    58.595] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    58.596] (==) modeset(0): DPI set to (96, 96)
[    58.596] (II) Loading sub module "fb"
[    58.596] (II) LoadModule: "fb"
[    58.596] (II) Loading /usr/lib/xorg/modules/libfb.so
[    58.596] (II) Module fb: vendor="X.Org Foundation"
[    58.596] 	compiled for 1.19.5, module version = 1.0.0
[    58.596] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    58.596] (II) UnloadModule: "fbdev"
[    58.596] (II) Unloading fbdev
[    58.596] (II) UnloadSubModule: "fbdevhw"
[    58.596] (II) Unloading fbdevhw
[    58.596] (II) UnloadModule: "vesa"
[    58.596] (II) Unloading vesa
[    58.596] (==) Depth 24 pixmap format is 32 bpp
[    58.780] (==) modeset(0): Backing store enabled
[    58.780] (==) modeset(0): Silken mouse enabled
[    58.780] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    58.839] (==) modeset(0): DPMS enabled
[    58.839] (II) modeset(0): [DRI2] Setup complete
[    58.839] (II) modeset(0): [DRI2]   DRI driver: i965
[    58.839] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    58.839] (--) RandR disabled
[    58.848] (II) SELinux: Disabled on system
[    58.857] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    58.857] (II) AIGLX: enabled GLX_ARB_create_context
[    58.857] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    58.857] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    58.857] (II) AIGLX: enabled GLX_INTEL_swap_event
[    58.857] (II) AIGLX: enabled GLX_SGI_swap_control
[    58.857] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    58.857] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    58.857] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    58.857] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    58.857] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    58.857] (II) AIGLX: Loaded and initialized i965
[    58.857] (II) GLX: Initialized DRI2 GL provider for screen 0
[    58.861] (II) modeset(0): Damage tracking initialized
[    58.861] (II) modeset(0): Setting screen physical size to 361 x 203
[    59.012] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    59.013] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    59.013] (II) LoadModule: "evdev"
[    59.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    59.057] (II) Module evdev: vendor="X.Org Foundation"
[    59.057] 	compiled for 1.19.3, module version = 2.10.5
[    59.057] 	Module class: X.Org XInput Driver
[    59.057] 	ABI class: X.Org XInput driver, version 24.1
[    59.057] (II) Using input driver 'evdev' for 'Power Button'
[    59.057] (**) Power Button: always reports core events
[    59.057] (**) evdev: Power Button: Device: "/dev/input/event2"
[    59.057] (--) evdev: Power Button: Vendor 0 Product 0x1
[    59.057] (--) evdev: Power Button: Found keys
[    59.057] (II) evdev: Power Button: Configuring as keyboard
[    59.057] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    59.057] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    59.057] (**) Option "xkb_rules" "evdev"
[    59.057] (**) Option "xkb_model" "a4techKB21"
[    59.057] (**) Option "xkb_layout" "us,af"
[    59.057] (**) Option "xkb_variant" ","
[    59.057] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    59.107] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    59.107] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    59.107] (II) Using input driver 'evdev' for 'Video Bus'
[    59.107] (**) Video Bus: always reports core events
[    59.108] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    59.108] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    59.108] (--) evdev: Video Bus: Found keys
[    59.108] (II) evdev: Video Bus: Configuring as keyboard
[    59.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[    59.108] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    59.108] (**) Option "xkb_rules" "evdev"
[    59.108] (**) Option "xkb_model" "a4techKB21"
[    59.108] (**) Option "xkb_layout" "us,af"
[    59.108] (**) Option "xkb_variant" ","
[    59.108] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    59.109] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    59.109] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    59.109] (II) Using input driver 'evdev' for 'Power Button'
[    59.109] (**) Power Button: always reports core events
[    59.109] (**) evdev: Power Button: Device: "/dev/input/event1"
[    59.109] (--) evdev: Power Button: Vendor 0 Product 0x1
[    59.109] (--) evdev: Power Button: Found keys
[    59.109] (II) evdev: Power Button: Configuring as keyboard
[    59.109] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    59.109] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    59.109] (**) Option "xkb_rules" "evdev"
[    59.110] (**) Option "xkb_model" "a4techKB21"
[    59.110] (**) Option "xkb_layout" "us,af"
[    59.110] (**) Option "xkb_variant" ","
[    59.110] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    59.111] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    59.111] (II) No input driver specified, ignoring this device.
[    59.111] (II) This device may have been added with another device file.
[    59.112] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    59.112] (II) No input driver specified, ignoring this device.
[    59.112] (II) This device may have been added with another device file.
[    59.117] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    59.117] (II) No input driver specified, ignoring this device.
[    59.117] (II) This device may have been added with another device file.
[    59.117] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    59.118] (II) No input driver specified, ignoring this device.
[    59.118] (II) This device may have been added with another device file.
[    59.119] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event5)
[    59.119] (**) SIGMACHIP Usb Mouse: Applying InputClass "evdev pointer catchall"
[    59.119] (II) Using input driver 'evdev' for 'SIGMACHIP Usb Mouse'
[    59.119] (**) SIGMACHIP Usb Mouse: always reports core events
[    59.119] (**) evdev: SIGMACHIP Usb Mouse: Device: "/dev/input/event5"
[    59.176] (--) evdev: SIGMACHIP Usb Mouse: Vendor 0x1a2c Product 0x44
[    59.176] (--) evdev: SIGMACHIP Usb Mouse: Found 3 mouse buttons
[    59.176] (--) evdev: SIGMACHIP Usb Mouse: Found scroll wheel(s)
[    59.176] (--) evdev: SIGMACHIP Usb Mouse: Found relative axes
[    59.176] (--) evdev: SIGMACHIP Usb Mouse: Found x and y relative axes
[    59.176] (II) evdev: SIGMACHIP Usb Mouse: Configuring as mouse
[    59.176] (II) evdev: SIGMACHIP Usb Mouse: Adding scrollwheel support
[    59.176] (**) evdev: SIGMACHIP Usb Mouse: YAxisMapping: buttons 4 and 5
[    59.176] (**) evdev: SIGMACHIP Usb Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    59.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:0044.0002/input/input8/event5"
[    59.176] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 9)
[    59.176] (II) evdev: SIGMACHIP Usb Mouse: initialized for relative axes.
[    59.177] (**) SIGMACHIP Usb Mouse: (accel) keeping acceleration scheme 1
[    59.177] (**) SIGMACHIP Usb Mouse: (accel) acceleration profile 0
[    59.177] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[    59.177] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[    59.178] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[    59.178] (II) No input driver specified, ignoring this device.
[    59.178] (II) This device may have been added with another device file.
[    59.179] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event10)
[    59.179] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "evdev keyboard catchall"
[    59.179] (II) Using input driver 'evdev' for 'Lenovo EasyCamera: Lenovo EasyC'
[    59.179] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[    59.179] (**) evdev: Lenovo EasyCamera: Lenovo EasyC: Device: "/dev/input/event10"
[    59.179] (--) evdev: Lenovo EasyCamera: Lenovo EasyC: Vendor 0xc45 Product 0x6513
[    59.180] (--) evdev: Lenovo EasyCamera: Lenovo EasyC: Found keys
[    59.180] (II) evdev: Lenovo EasyCamera: Lenovo EasyC: Configuring as keyboard
[    59.180] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input12/event10"
[    59.180] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 10)
[    59.180] (**) Option "xkb_rules" "evdev"
[    59.180] (**) Option "xkb_model" "a4techKB21"
[    59.180] (**) Option "xkb_layout" "us,af"
[    59.180] (**) Option "xkb_variant" ","
[    59.180] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    59.181] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    59.181] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    59.181] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    59.181] (**) AT Translated Set 2 keyboard: always reports core events
[    59.181] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    59.181] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    59.181] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    59.181] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    59.181] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    59.181] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    59.181] (**) Option "xkb_rules" "evdev"
[    59.182] (**) Option "xkb_model" "a4techKB21"
[    59.182] (**) Option "xkb_layout" "us,af"
[    59.182] (**) Option "xkb_variant" ","
[    59.182] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[    59.183] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[    59.183] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    59.183] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[    59.183] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    59.183] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    59.183] (II) LoadModule: "synaptics"
[    59.184] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    59.184] (II) Module synaptics: vendor="X.Org Foundation"
[    59.184] 	compiled for 1.19.3, module version = 1.9.0
[    59.184] 	Module class: X.Org XInput Driver
[    59.184] 	ABI class: X.Org XInput driver, version 24.1
[    59.184] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    59.184] (**) ETPS/2 Elantech Touchpad: always reports core events
[    59.184] (**) Option "Device" "/dev/input/event6"
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3082 (res 32)
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1508 (res 32)
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    59.224] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    59.224] (**) ETPS/2 Elantech Touchpad: always reports core events
[    59.268] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event6"
[    59.268] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[    59.268] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    59.268] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    59.268] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.058
[    59.268] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    59.268] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    59.268] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    59.269] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    59.269] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    59.269] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    59.270] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    72.290] (II) modeset(0): EDID vendor "AUO", prod id 16620
[    72.290] (II) modeset(0): Printing DDC gathered Modelines:
[    72.290] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    77.047] (II) modeset(0): EDID vendor "AUO", prod id 16620
[    77.047] (II) modeset(0): Printing DDC gathered Modelines:
[    77.048] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    77.068] (II) modeset(0): EDID vendor "AUO", prod id 16620
[    77.190] (II) modeset(0): Printing DDC gathered Modelines:
[    77.191] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    77.327] (II) modeset(0): EDID vendor "AUO", prod id 16620
[    77.327] (II) modeset(0): Printing DDC gathered Modelines:
[    77.327] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[   419.827] (II) modeset(0): EDID vendor "AUO", prod id 16620
[   419.827] (II) modeset(0): Printing DDC gathered Modelines:
[   419.827] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[   710.924] (II) modeset(0): EDID vendor "AUO", prod id 16620
[   710.924] (II) modeset(0): Printing DDC gathered Modelines:
[   710.924] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[  1665.828] (II) modeset(0): EDID vendor "AUO", prod id 16620
[  1665.828] (II) modeset(0): Printing DDC gathered Modelines:
[  1665.828] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[  1667.747] (II) modeset(0): EDID vendor "AUO", prod id 16620
[  1667.747] (II) modeset(0): Printing DDC gathered Modelines:
[  1667.747] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[  1667.774] (II) modeset(0): EDID vendor "AUO", prod id 16620
[  1667.774] (II) modeset(0): Printing DDC gathered Modelines:
[  1667.774] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)

Co robić?
Mam w ustawieniach autologowanie, ale wolę nie zmieniać ustawień, bo boję się że nie będę mógł korzystać z sydstemu. :clap:
A chcę skorzystać z zainstalowanego Unity8
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Jaką masz kartę graficzną i jakie sterowniki?
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Po wpisaniu

Kod: Zaznacz cały

sudo lshw -c display
otrzymuję

Kod: Zaznacz cały

description: VGA compatible controller
       product: Atom Processor Z36xxx/Z37xxx Series Graphics & Display
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 0e
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:89 memory:90000000-903fffff memory:80000000-8fffffff ioport:2050(size=8) memory:c0000-dffff
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Pokaż jakie pakiety z hwe masz zainstalowane:

Kod: Zaznacz cały

dpkg -l | grep hwe
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Kod: Zaznacz cały

ii  linux-generic-hwe-16.04                                     4.13.0.36.55                                             amd64        Complete Generic Linux kernel and headers
ii  linux-headers-generic-hwe-16.04                             4.13.0.36.55                                             amd64        Generic Linux kernel headers
ii  linux-image-generic-hwe-16.04                               4.13.0.36.55                                             amd64        Generic Linux kernel image
ii  xserver-xorg-core-hwe-16.04                                 2:1.19.5-0ubuntu2~16.04.1                                amd64        Xorg X server - core server
ii  xserver-xorg-hwe-16.04                                      1:7.7+16ubuntu3~16.04.1                                  amd64        X.Org X server
ii  xserver-xorg-input-all-hwe-16.04                            1:7.7+16ubuntu3~16.04.1                                  amd64        X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev-hwe-16.04                          1:2.10.5-1ubuntu1~16.04.1                                amd64        X.Org X server -- evdev input driver
ii  xserver-xorg-input-synaptics-hwe-16.04                      1.9.0-1ubuntu1~16.04.1                                   amd64        Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-wacom-hwe-16.04                          1:0.34.0-0ubuntu2~16.04.1                                amd64        X.Org X server -- Wacom input driver
ii  xserver-xorg-legacy-hwe-16.04                               2:1.19.5-0ubuntu2~16.04.1                                amd64        setuid root Xorg server wrapper
ii  xserver-xorg-video-all-hwe-16.04                            1:7.7+16ubuntu3~16.04.1                                  amd64        X.Org X server -- output driver metapackage
ii  xserver-xorg-video-amdgpu-hwe-16.04                         1.4.0-1~16.04.1                                          amd64        X.Org X server -- AMDGPU display driver
ii  xserver-xorg-video-ati-hwe-16.04                            1:7.10.0-1~16.04.1                                       amd64        X.Org X server -- AMD/ATI display driver wrapper
ii  xserver-xorg-video-fbdev-hwe-16.04                          1:0.4.4-1build6~16.04.1                                  amd64        X.Org X server -- fbdev display driver
ii  xserver-xorg-video-intel-hwe-16.04                          2:2.99.917+git20170309-0ubuntu1~16.04.1                  amd64        X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-nouveau-hwe-16.04                        1:1.0.15-2~16.04.1                                       amd64        X.Org X server -- Nouveau display driver
ii  xserver-xorg-video-qxl-hwe-16.04                            0.1.5-2build1~16.04.1                                    amd64        X.Org X server -- QXL display driver
ii  xserver-xorg-video-radeon-hwe-16.04                         1:7.10.0-1~16.04.1                                       amd64        X.Org X server -- AMD/ATI Radeon display driver
ii  xserver-xorg-video-vesa-hwe-16.04                           1:2.3.4-1build3~16.04.1                                  amd64        X.Org X server -- VESA display driver
ii  xserver-xorg-video-vmware-hwe-16.04                         1:13.2.1-1build1~16.04.1                                 amd64        X.Org X server -- VMware display driver
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Jak dokładnie brzmi komunikat błędu i kiedy jest wyświetlany?
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Kiedy się wylogowuje, pojawia się komunikat o tym, że jest błęðna konfiguracja karty graficznej i pojawia się pole wyboru: próbuj z tą konfiguracją, próbuj ze starą konfiguracją, wyświetl logi i powrót
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Jak wyglądają te logi, które możesz wyświetlić?
To może być ten błąd: https://bugs.launchpad.net/ubuntu/+sour ... ug/1742602
Może spróbuj starszego kernela?
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Niestety mam też taką sytuację przy jądrze 4.4. wszystkie logi są na górze, chyba że istnieje jeszcze jakiś sposób by znaleźć dodatkowe logi?
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Masz plik /etc/X11/xorg.conf albo pliki w /etc/X11/xorg.conf.d/ ? Jeśli tak - pokaż je.
Ponadto - pokaż końcówkę logu dmesg po nieudanym wylogowaniu.
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Nie znalazłem tego pliku i folderu, a log dmesg wygląda tak:

Kod: Zaznacz cały

[    5.292547]    prefetch64-sse:  8790.000 MB/sec
[    5.322280] usb 1-1.4.1: New USB device found, idVendor=0c45, idProduct=6513
[    5.322282] usb 1-1.4.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    5.322284] usb 1-1.4.1: Product: Lenovo EasyCamera
[    5.322286] usb 1-1.4.1: Manufacturer: J5PE4PLHD
[    5.332007]    generic_sse:  7114.000 MB/sec
[    5.332009] xor: using function: prefetch64-sse (8790.000 MB/sec)
[    5.334124] async_tx: api initialized (async)
[    5.412432] usb 1-1.4.2: new high-speed USB device number 6 using ehci-pci
[    5.522317] usb 1-1.4.2: New USB device found, idVendor=0bda, idProduct=0129
[    5.522321] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.522324] usb 1-1.4.2: Product: USB2.0-CRW
[    5.522326] usb 1-1.4.2: Manufacturer: Generic
[    5.522328] usb 1-1.4.2: SerialNumber: 20100201396000000
[    5.536106] usbcore: registered new interface driver rtsx_usb
[    5.604579] usb 1-1.4.3: new full-speed USB device number 7 using ehci-pci
[    5.713603] usb 1-1.4.3: New USB device found, idVendor=0cf3, idProduct=3004
[    5.713607] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.456332] random: crng init done
[    8.841376] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.770700] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   10.788718] systemd[1]: Detected architecture x86-64.
[   10.802217] systemd[1]: Set hostname to <daniel-Lenovo-G50-30>.
[   15.004372] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[   15.004601] systemd[1]: Listening on udev Control Socket.
[   15.004726] systemd[1]: Listening on Journal Socket.
[   15.004761] systemd[1]: Reached target User and Group Name Lookups.
[   15.004840] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   15.004865] systemd[1]: Reached target Remote File Systems (Pre).
[   15.004886] systemd[1]: Reached target Remote File Systems.
[   15.217682] ashmem_linux: loading out-of-tree module taints kernel.
[   15.217718] ashmem_linux: module verification failed: signature and/or required key missing - tainting kernel
[   16.245228] lp: driver loaded but no devices found
[   16.408287] ppdev: user-space parallel port driver
[   16.430229] systemd[1]: Started Load Kernel Modules.
[   16.432205] systemd[1]: Mounting Configuration File System...
[   16.434327] systemd[1]: Mounting FUSE Control File System...
[   16.436536] systemd[1]: Starting Apply Kernel Variables...
[   16.636128] systemd[1]: Started Apply Kernel Variables.
[   16.664414] systemd[1]: Mounted POSIX Message Queue File System.
[   16.664947] systemd[1]: Mounted FUSE Control File System.
[   16.665365] systemd[1]: Mounted Huge Pages File System.
[   16.665747] systemd[1]: Mounted Configuration File System.
[   16.666085] systemd[1]: Mounted Debug File System.
[   20.656753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   21.563365] systemd-journald[528]: Received request to flush runtime journal from PID 1
[   34.212119] audit: type=1400 audit(1523512997.145:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=980 comm="apparmor_parser"
[   34.212556] audit: type=1400 audit(1523512997.145:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=979 comm="apparmor_parser"
[   34.313056] audit: type=1400 audit(1523512997.246:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=982 comm="apparmor_parser"
[   34.313064] audit: type=1400 audit(1523512997.246:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=982 comm="apparmor_parser"
[   34.313069] audit: type=1400 audit(1523512997.246:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=982 comm="apparmor_parser"
[   34.313072] audit: type=1400 audit(1523512997.246:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=982 comm="apparmor_parser"
[   34.487276] audit: type=1400 audit(1523512997.420:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=983 comm="apparmor_parser"
[   34.487285] audit: type=1400 audit(1523512997.420:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
[   34.487290] audit: type=1400 audit(1523512997.420:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=983 comm="apparmor_parser"
[   34.487294] audit: type=1400 audit(1523512997.420:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
[   39.253797] kauditd_printk_skb: 45 callbacks suppressed
[   39.253799] audit: type=1400 audit(1523513002.187:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=1046 comm="apparmor_parser"
[   39.371667] audit: type=1400 audit(1523513002.304:58): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gotop.gotop" pid=1064 comm="apparmor_parser"
[   39.491093] audit: type=1400 audit(1523513002.424:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hiri.hiri" pid=1065 comm="apparmor_parser"
[   39.788618] audit: type=1400 audit(1523513002.721:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.emoj.emoj" pid=1062 comm="apparmor_parser"
[   41.129216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   41.163774] Bluetooth: Core ver 2.22
[   41.163802] NET: Registered protocol family 31
[   41.163804] Bluetooth: HCI device and connection manager initialized
[   41.163808] Bluetooth: HCI socket layer initialized
[   41.163812] Bluetooth: L2CAP socket layer initialized
[   41.163822] Bluetooth: SCO socket layer initialized
[   41.383211] audit: type=1400 audit(1523513004.316:61): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.labelnation.labelnation" pid=1066 comm="apparmor_parser"
[   41.407486] audit: type=1400 audit(1523513004.340:62): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.base" pid=1067 comm="apparmor_parser"
[   41.407605] audit: type=1400 audit(1523513004.340:63): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.calc" pid=1068 comm="apparmor_parser"
[   41.429746] audit: type=1400 audit(1523513004.362:64): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.filebug" pid=1140 comm="apparmor_parser"
[   41.621723] audit: type=1400 audit(1523513004.554:65): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.impress" pid=1143 comm="apparmor_parser"
[   41.717000] audit: type=1400 audit(1523513004.650:66): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.libreoffice.libreoffice" pid=1144 comm="apparmor_parser"
[   42.814907] Bluetooth: HCI UART driver ver 2.3
[   42.814911] Bluetooth: HCI UART protocol H4 registered
[   42.814912] Bluetooth: HCI UART protocol BCSP registered
[   42.814941] Bluetooth: HCI UART protocol LL registered
[   42.814943] Bluetooth: HCI UART protocol ATH3K registered
[   42.814944] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   42.814986] Bluetooth: HCI UART protocol Intel registered
[   42.815009] Bluetooth: HCI UART protocol Broadcom registered
[   42.815010] Bluetooth: HCI UART protocol QCA registered
[   42.815011] Bluetooth: HCI UART protocol AG6XX registered
[   42.815012] Bluetooth: HCI UART protocol Marvell registered
[   43.390777] ath: phy0: WB335 2-ANT card detected
[   43.390781] ath: phy0: Set BT/WLAN RX diversity capability
[   43.399451] ath: phy0: Enable LNA combining
[   43.400738] ath: phy0: ASPM enabled: 0x43
[   43.400742] ath: EEPROM regdomain: 0x6a
[   43.400744] ath: EEPROM indicates we should expect a direct regpair map
[   43.400746] ath: Country alpha2 being used: 00
[   43.400747] ath: Regpair used: 0x6a
[   43.715538] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   43.716567] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb0eec1a00000, irq=18
[   43.767918] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   44.365259] kauditd_printk_skb: 16 callbacks suppressed
[   44.365261] audit: type=1400 audit(1523513007.298:83): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.slack.slack" pid=1773 comm="apparmor_parser"
[   44.437977] audit: type=1400 audit(1523513007.371:84): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.psst.psst" pid=1737 comm="apparmor_parser"
[   45.221934] kvm: disabled by bios
[   45.253458] kvm: disabled by bios
[   45.486568] audit: type=1400 audit(1523513008.419:85): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.polarr.polarr" pid=1715 comm="apparmor_parser"
[   45.569949] audit: type=1400 audit(1523513008.503:86): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.solitaire.1bsyl" pid=1784 comm="apparmor_parser"
[   46.083628] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[   46.084699] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   46.084702] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   46.084705] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   46.084707] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   46.084708] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   46.084711] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1a
[   46.084713] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x19
[   46.087870] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   46.106126] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   46.106252] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   46.106366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   46.424696] audit: type=1400 audit(1523513009.357:87): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.anbox" pid=1863 comm="apparmor_parser"
[   46.493509] audit: type=1400 audit(1523513009.426:88): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.telegram-desktop.telegram-desktop" pid=1823 comm="apparmor_parser"
[   46.566913] audit: type=1400 audit(1523513009.500:89): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubports-installer.ubports-installer" pid=1827 comm="apparmor_parser"
[   46.603091] audit: type=1400 audit(1523513009.536:90): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.unixbench.unixbench" pid=1841 comm="apparmor_parser"
[   46.605665] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   46.605739] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   46.605800] intel_soc_dts_thermal: request_threaded_irq ret -22
[   46.658300] audit: type=1400 audit(1523513009.591:91): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.cryptowatch" pid=1908 comm="apparmor_parser"
[   46.665476] audit: type=1400 audit(1523513009.598:92): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=1907 comm="apparmor_parser"
[   46.720904] intel_rapl: Found RAPL domain package
[   46.720907] intel_rapl: Found RAPL domain core
[   48.076238] Adding 4075516k swap on /dev/sda5.  Priority:-1 extents:1 across:4075516k FS
[   48.195554] usbcore: registered new interface driver btusb
[   48.202012] media: Linux media interface: v0.10
[   48.212579] Linux video capture interface: v2.00
[   48.233596] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6513)
[   48.266835] uvcvideo 1-1.4.1:1.0: Entity type for entity Extension 3 was not initialized!
[   48.266838] uvcvideo 1-1.4.1:1.0: Entity type for entity Processing 2 was not initialized!
[   48.266841] uvcvideo 1-1.4.1:1.0: Entity type for entity Camera 1 was not initialized!
[   48.267072] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input11
[   48.267183] usbcore: registered new interface driver uvcvideo
[   48.267184] USB Video Class driver (1.1.1)
[   48.612739] usbcore: registered new interface driver ath3k
[   48.830258] usb 1-1.4.3: USB disconnect, device number 7
[   49.052052] usb 1-1.4.3: new full-speed USB device number 8 using ehci-pci
[   54.320036] usb 1-1.4.3: device descriptor read/64, error -110
[   54.532341] new mount options do not match the existing superblock, will be ignored
[   59.725636] usb 1-1.4.3: New USB device found, idVendor=0cf3, idProduct=3004
[   59.725640] usb 1-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.687934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   60.687937] Bluetooth: BNEP filters: protocol multicast
[   60.687943] Bluetooth: BNEP socket layer initialized
[   63.555784] ip_tables: (C) 2000-2006 Netfilter Core Team
[   63.571045] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   64.730199] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   64.743599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   64.750247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   65.134501] r8169 0000:03:00.0 eth0: link down
[   65.134573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   65.769090] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.811842] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   68.425979] wlan0: authenticate with 4e:d9:e7:0d:80:06
[   68.438648] wlan0: send auth to 4e:d9:e7:0d:80:06 (try 1/3)
[   68.440572] wlan0: authenticated
[   68.444285] wlan0: associate with 4e:d9:e7:0d:80:06 (try 1/3)
[   68.448335] wlan0: RX AssocResp from 4e:d9:e7:0d:80:06 (capab=0x431 status=0 aid=4)
[   68.448489] wlan0: associated
[   68.448550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   70.236590] vboxdrv: Found 4 processor cores
[   70.260431] vboxdrv: TSC mode is Invariant, tentative frequency 2165801409 Hz
[   70.260434] vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
[   70.274578] VBoxNetFlt: Successfully started.
[   70.288574] VBoxNetAdp: Successfully started.
[   70.302667] VBoxPciLinuxInit
[   70.306866] vboxpci: IOMMU not found (not registered)
[   73.172897] kauditd_printk_skb: 21 callbacks suppressed
[   73.172899] audit: type=1400 audit(1523513036.106:114): apparmor="ALLOWED" operation="exec" profile="snap.anbox.container-manager" name="/sbin/xtables-multi" pid=3485 comm="anbox-bridge.sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="snap.anbox.container-manager//null-/sbin/xtables-multi"
[   73.176874] audit: type=1400 audit(1523513036.110:115): apparmor="ALLOWED" operation="file_inherit" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/dev/null" pid=3485 comm="iptables" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[   73.177066] audit: type=1400 audit(1523513036.110:116): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/sbin/xtables-multi" pid=3485 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[   73.177203] audit: type=1400 audit(1523513036.110:117): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/ld-2.23.so" pid=3485 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[   73.177835] audit: type=1400 audit(1523513036.111:118): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/etc/ld.so.cache" pid=3485 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   73.178694] audit: type=1400 audit(1523513036.111:119): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=3485 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   73.180433] audit: type=1400 audit(1523513036.113:120): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip4tc.so.0.1.0" pid=3485 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[   73.180726] audit: type=1400 audit(1523513036.113:121): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=3485 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   73.189155] audit: type=1400 audit(1523513036.122:122): apparmor="ALLOWED" operation="file_mmap" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libip6tc.so.0.1.0" pid=3485 comm="iptables" requested_mask="rm" denied_mask="rm" fsuid=0 ouid=0
[   73.192338] audit: type=1400 audit(1523513036.125:123): apparmor="ALLOWED" operation="open" profile="snap.anbox.container-manager//null-/sbin/xtables-multi" name="/lib/x86_64-linux-gnu/libxtables.so.11.0.0" pid=3485 comm="iptables" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   73.275535] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   78.410648] new mount options do not match the existing superblock, will be ignored
[  103.752740] Bluetooth: RFCOMM TTY layer initialized
[  103.752751] Bluetooth: RFCOMM socket layer initialized
[  103.752770] Bluetooth: RFCOMM ver 1.11

Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Nie widzę w tym co podałeś błędów.

Opisz krok po kroku co robisz i co się dzieje. Jeśli możliwe pokaż zdjęcie tego ekranu z błędem.

Pokaż też wynik polecenia:

Kod: Zaznacz cały

lightdm --show-config
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Kod: Zaznacz cały

   [Seat:*]
E  user-session=ubuntu
A  unity-compositor-command=unity-system-compositor.sleep
A  session-wrapper=lightdm-unity8-session
C  greeter-wrapper=/usr/lib/lightdm/lightdm-greeter-session
D  guest-wrapper=/usr/lib/lightdm/lightdm-guest-session
H  greeter-session=unity8-greeter
G  xserver-command=X -core
I  autologin-guest=false
I  autologin-user-timeout=0
I  autologin-session=lightdm-autologin
I  autologin-user=daniel

   [LightDM]
B  backup-logs=false

Sources:
A  /usr/share/lightdm/lightdm.conf.d/45-unity8.conf
B  /usr/share/lightdm/lightdm.conf.d/50-disable-log-backup.conf
C  /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf
D  /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf
E  /usr/share/lightdm/lightdm.conf.d/50-ubuntu.conf
F  /usr/share/lightdm/lightdm.conf.d/50-unity-greeter.conf
G  /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf
H  /usr/share/lightdm/lightdm.conf.d/99-unity8-greeter.conf
I  /etc/lightdm/lightdm.conf
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Pokaż zawartość pliku /etc/lightdm/lightdm.conf
Zapomniałem, że przecież Unity8 na serwerze graficznym Mir działa, więc xorg nie ma nic do tego.

W jaki sposób zainstalowałeś Unity8?
Donieck
Piegowaty Guziec
Piegowaty Guziec
Posty: 8
Rejestracja: 28 lut 2018, 17:59
Płeć: Mężczyzna
Wersja Ubuntu: 16.04
Środowisko graficzne: Unity
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: Donieck »

Unity8 zainstalowałem za pomocą skryptu stąd https://github.com/ubports/unity8-desktop-install-tools. Udostępnia je społeczność Ubuntu ports.

Kod: Zaznacz cały

[SeatDefaults]
autologin-guest=false
autologin-user-timeout=0
autologin-session=lightdm-autologin

[Seat:*]
autologin-user=daniel
Awatar użytkownika
mario_7
Administrator
Administrator
Posty: 8594
Rejestracja: 30 sie 2006, 13:11
Płeć: Mężczyzna
Wersja Ubuntu: 20.04
Środowisko graficzne: GNOME
Architektura: x86_64

Re: Unity 7 nie mogę się wylogować

Post autor: mario_7 »

Myślę, że tamten github to dobre miejsce żeby zgłosić problem który napotkałeś.
ODPOWIEDZ

Wróć do „Środowiska graficzne”

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 12 gości