Progres: Odinstalowałem to co zostało jeszcze raz zainstalowałem sterownik AMD.. Nie chciał wykonać żadnej komendy typu : amdconfig --initial o zmianie trybu na Discrete GPU też nie chciał słuchać zdecydowałem się na restart. Po Restarcie już zaczął "gadać"
Wygląda to tak:
Kod: Zaznacz cały
sudo amdconfig --px-dgpu
PowerXpress info: Diagnostic output from /usr/lib/fglrx/switchlibglx:
update-alternatives: ostrzeżenie: wymuszenie ponownej instalacji alternatywy /usr/lib/fglrx/ld.so.conf, ponieważ grupa dowiązań x86_64-linux-gnu_gl_conf jest nieprawidłowa
update-alternatives: ostrzeżenie: pomijanie zastąpienia /usr/lib/x86_64-linux-gnu/xorg/extra-modules dowiązaniem
PowerXpress: Discrete GPU is selected (High-Performance mode), please restart Xserver(s) for changes to take effect!
Kod: Zaznacz cały
sudo amdconfig --initial
Found fglrx primary device section
PowerXpress info: Diagnostic output from /usr/lib/fglrx/switchlibglx:
update-alternatives: ostrzeżenie: wymuszenie ponownej instalacji alternatywy /usr/lib/fglrx/ld.so.conf, ponieważ grupa dowiązań x86_64-linux-gnu_gl_conf jest nieprawidłowa
update-alternatives: ostrzeżenie: pomijanie zastąpienia /usr/lib/x86_64-linux-gnu/xorg/extra-modules dowiązaniem
Using xorg.conf
Saving back-up to xorg.conf.fglrx-1
Kod: Zaznacz cały
sudo update-alternatives --config x86_64-linux-gnu_gl_conf
Są 3 dostępne alternatywy dla x86_64-linux-gnu_gl_conf (dostarczające /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf).
Wybór Ścieżka Priorytet Status
------------------------------------------------------------
0 /usr/lib/fglrx/ld.so.conf 1000 tryb auto
* 1 /usr/lib/fglrx/ld.so.conf 1000 tryb ręczny
2 /usr/lib/pxpress/ld.so.conf 900 tryb ręczny
3 /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf 500 tryb ręczny
Proszę wcisnąć Enter, aby pozostawić bieżący wybór[*]; albo wpisać wybrany numer: 2
update-alternatives: użycie /usr/lib/pxpress/ld.so.conf jako dostarczającego /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) w tryb ręczny
update-alternatives: ostrzeżenie: pomijanie zastąpienia /usr/lib/x86_64-linux-gnu/xorg/extra-modules dowiązaniem
Ten który wybrałem wygląda tak:
Kod: Zaznacz cały
/usr/lib/x86_64-linux-gnu/mesa
/usr/lib/pxpress/lib
/usr/lib/i386-linux-gnu/mesa
/usr/lib32/pxpress/lib
Kod: Zaznacz cały
/usr/lib/fglrx
/usr/lib32/fglrx
Kod: Zaznacz cały
/usr/lib/x86_64-linux-gnu/mesa
Kod: Zaznacz cały
# Warning: This file is autogenerated by fglrx-pxpress. All changes to this file will be lost.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "uxa"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Kod: Zaznacz cały
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Update:
Hmm wygląda to tak jak by karta AMD nie mogła zostać porwanie zainicjowana. Z jakiegoś powodu nie może wyświetlać obrazu.. Po usunięciu pliku xorg.conf po restarcie wita mnie pulpit renderowany kartą intela OpenGl nie działa... Sprobóje jeszcze zamienić plik xorg.conf na taki gdzie są zawarte informacje o dwóch kartach.. Też myślę by doprowadzić do stanu używalności system na karcie Intela później debugować co z tą kartą AMD... Może wkleję logi może coś z nich będzie można wyczytać; )
Edit:
Xorg.0.log:
Kod: Zaznacz cały
[ 19.756]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 19.756] X Protocol Version 11, Revision 0
[ 19.756] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 19.756] Current Operating System: Linux dy-Aspire-4820TG 3.12.7-ext73-f1-27.4-k8-ags-cfs #5 SMP PREEMPT Sun Jan 12 15:54:03 CET 2014 x86_64
[ 19.756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.7-ext73-f1-27.4-k8-ags-cfs root=UUID=83c81425-0ed2-4d0e-833a-3850fbfe9580 ro acpi_osi=Linux acpi_enforce_resources=lax i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1 quiet splash vt.handoff=7
[ 19.756] Build Date: 17 December 2013 10:06:15AM
[ 19.756] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 19.756] Current version of pixman: 0.30.2
[ 19.756] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.756] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.756] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 17 13:04:31 2014
[ 19.827] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.877] (==) No Layout section. Using the first Screen section.
[ 19.877] (==) No screen section available. Using defaults.
[ 19.877] (**) |-->Screen "Default Screen Section" (0)
[ 19.877] (**) | |-->Monitor "<default monitor>"
[ 19.878] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.878] (==) Automatically adding devices
[ 19.878] (==) Automatically enabling devices
[ 19.878] (==) Automatically adding GPU devices
[ 19.936] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.936] Entry deleted from font path.
[ 19.936] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19.936] Entry deleted from font path.
[ 19.936] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.936] Entry deleted from font path.
[ 19.939] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19.939] Entry deleted from font path.
[ 19.939] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.939] Entry deleted from font path.
[ 19.939] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 19.939] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 19.939] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.939] (II) Loader magic: 0x7f21d650ed20
[ 19.939] (II) Module ABI versions:
[ 19.939] X.Org ANSI C Emulation: 0.4
[ 19.939] X.Org Video Driver: 14.1
[ 19.939] X.Org XInput driver : 19.1
[ 19.939] X.Org Server Extension : 7.0
[ 19.939] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.940] (--) PCI:*(0:0:2:0) 8086:0046:1025:0359 rev 24, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 19.940] (--) PCI: (0:1:0:0) 1002:68c1:1025:0359 rev 0, Mem @ 0xd0000000/134217728, 0xdc400000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 19.940] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.961] Initializing built-in extension Generic Event Extension
[ 19.961] Initializing built-in extension SHAPE
[ 19.961] Initializing built-in extension MIT-SHM
[ 19.961] Initializing built-in extension XInputExtension
[ 19.961] Initializing built-in extension XTEST
[ 19.961] Initializing built-in extension BIG-REQUESTS
[ 19.961] Initializing built-in extension SYNC
[ 19.961] Initializing built-in extension XKEYBOARD
[ 19.961] Initializing built-in extension XC-MISC
[ 19.961] Initializing built-in extension SECURITY
[ 19.961] Initializing built-in extension XINERAMA
[ 19.961] Initializing built-in extension XFIXES
[ 19.961] Initializing built-in extension RENDER
[ 19.961] Initializing built-in extension RANDR
[ 19.961] Initializing built-in extension COMPOSITE
[ 19.961] Initializing built-in extension DAMAGE
[ 19.961] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.961] Initializing built-in extension DOUBLE-BUFFER
[ 19.961] Initializing built-in extension RECORD
[ 19.961] Initializing built-in extension DPMS
[ 19.961] Initializing built-in extension X-Resource
[ 19.961] Initializing built-in extension XVideo
[ 19.961] Initializing built-in extension XVideo-MotionCompensation
[ 19.961] Initializing built-in extension SELinux
[ 19.961] Initializing built-in extension XFree86-VidModeExtension
[ 19.961] Initializing built-in extension XFree86-DGA
[ 19.961] Initializing built-in extension XFree86-DRI
[ 19.961] Initializing built-in extension DRI2
[ 19.961] (II) "glx" will be loaded by default.
[ 19.961] (WW) "xmir" is not to be loaded by default. Skipping.
[ 19.961] (II) LoadModule: "dri2"
[ 19.961] (II) Module "dri2" already built-in
[ 19.961] (II) LoadModule: "glamoregl"
[ 20.233] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 20.449] (II) Module glamoregl: vendor="X.Org Foundation"
[ 20.449] compiled for 1.14.3, module version = 0.5.1
[ 20.449] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.449] (II) LoadModule: "glx"
[ 20.449] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[ 20.469] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.469] compiled for 6.9.0, module version = 1.0.0
[ 20.469] Loading extension GLX
[ 20.469] (==) Matched intel as autoconfigured driver 0
[ 20.469] (==) Matched intel as autoconfigured driver 1
[ 20.469] (==) Matched vesa as autoconfigured driver 2
[ 20.469] (==) Matched modesetting as autoconfigured driver 3
[ 20.469] (==) Matched fbdev as autoconfigured driver 4
[ 20.469] (==) Assigned the driver to the xf86ConfigLayout
[ 20.469] (II) LoadModule: "intel"
[ 20.469] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.546] (II) Module intel: vendor="X.Org Foundation"
[ 20.546] compiled for 1.14.3, module version = 2.99.904
[ 20.546] Module class: X.Org Video Driver
[ 20.546] ABI class: X.Org Video Driver, version 14.1
[ 20.546] (II) LoadModule: "vesa"
[ 20.546] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.559] (II) Module vesa: vendor="X.Org Foundation"
[ 20.559] compiled for 1.14.1, module version = 2.3.2
[ 20.559] Module class: X.Org Video Driver
[ 20.559] ABI class: X.Org Video Driver, version 14.1
[ 20.559] (II) LoadModule: "modesetting"
[ 20.559] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.562] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.562] compiled for 1.14.1, module version = 0.8.0
[ 20.562] Module class: X.Org Video Driver
[ 20.562] ABI class: X.Org Video Driver, version 14.1
[ 20.562] (II) LoadModule: "fbdev"
[ 20.562] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.564] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.564] compiled for 1.14.1, module version = 0.4.3
[ 20.564] Module class: X.Org Video Driver
[ 20.564] ABI class: X.Org Video Driver, version 14.1
[ 20.564] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 20.569] (II) VESA: driver for VESA chipsets: vesa
[ 20.569] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.569] (II) FBDEV: driver for framebuffer: fbdev
[ 20.569] (++) using VT number 7
[ 20.569] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.904-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[ 20.570] (WW) Falling back to old probe method for vesa
[ 20.571] (WW) Falling back to old probe method for modesetting
[ 20.571] (WW) Falling back to old probe method for fbdev
[ 20.571] (II) Loading sub module "fbdevhw"
[ 20.571] (II) LoadModule: "fbdevhw"
[ 20.571] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.588] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.588] compiled for 1.14.5, module version = 0.0.2
[ 20.588] ABI class: X.Org Video Driver, version 14.1
[ 20.589] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.589] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.589] (==) intel(0): RGB weight 888
[ 20.589] (==) intel(0): Default visual is TrueColor
[ 20.589] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 20.589] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 20.589] (**) intel(0): Framebuffer tiled
[ 20.589] (**) intel(0): Pixmaps tiled
[ 20.590] (**) intel(0): "Tear free" disabled
[ 20.590] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 20.590] (II) intel(0): Output LVDS1 has no monitor section
[ 20.590] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 20.590] (II) intel(0): Output VGA1 has no monitor section
[ 20.590] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 20.590] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 20.590] (==) intel(0): DPI set to (96, 96)
[ 20.590] (II) Loading sub module "dri2"
[ 20.590] (II) LoadModule: "dri2"
[ 20.590] (II) Module "dri2" already built-in
[ 20.590] (II) UnloadModule: "vesa"
[ 20.590] (II) Unloading vesa
[ 20.590] (II) UnloadModule: "modesetting"
[ 20.590] (II) Unloading modesetting
[ 20.590] (II) UnloadModule: "fbdev"
[ 20.590] (II) Unloading fbdev
[ 20.590] (II) UnloadSubModule: "fbdevhw"
[ 20.590] (II) Unloading fbdevhw
[ 20.590] (==) Depth 24 pixmap format is 32 bpp
[ 20.632] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 20.632] (==) intel(0): Backing store disabled
[ 20.632] (==) intel(0): Silken mouse enabled
[ 20.632] (II) intel(0): HW Cursor enabled
[ 20.632] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.634] (==) intel(0): DPMS enabled
[ 20.634] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 20.634] (II) intel(0): [DRI2] Setup complete
[ 20.634] (II) intel(0): [DRI2] DRI driver: i965
[ 20.634] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.634] (==) intel(0): hotplug detection: "enabled"
[ 20.634] (--) RandR disabled
[ 20.639] (II) SELinux: Disabled on system
[ 20.654] (EE) GLX error: Can not get required symbols.
[ 20.665] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 20.679] (II) intel(0): Setting screen physical size to 361 x 203
[ 20.779] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 20.800] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 20.800] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.800] (II) LoadModule: "evdev"
[ 20.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.831] (II) Module evdev: vendor="X.Org Foundation"
[ 20.831] compiled for 1.14.1, module version = 2.7.3
[ 20.831] Module class: X.Org XInput Driver
[ 20.831] ABI class: X.Org XInput driver, version 19.1
[ 20.831] (II) Using input driver 'evdev' for 'Power Button'
[ 20.831] (**) Power Button: always reports core events
[ 20.831] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 20.831] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.831] (--) evdev: Power Button: Found keys
[ 20.831] (II) evdev: Power Button: Configuring as keyboard
[ 20.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 20.831] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 20.831] (**) Option "xkb_rules" "evdev"
[ 20.831] (**) Option "xkb_model" "pc105"
[ 20.831] (**) Option "xkb_layout" "pl"
[ 20.833] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[ 20.852] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 20.852] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.852] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.852] (**) Video Bus: always reports core events
[ 20.852] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 20.852] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 20.852] (--) evdev: Video Bus: Found keys
[ 20.852] (II) evdev: Video Bus: Configuring as keyboard
[ 20.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event6"
[ 20.852] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 20.852] (**) Option "xkb_rules" "evdev"
[ 20.852] (**) Option "xkb_model" "pc105"
[ 20.852] (**) Option "xkb_layout" "pl"
[ 20.852] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 20.852] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.852] (II) Using input driver 'evdev' for 'Power Button'
[ 20.852] (**) Power Button: always reports core events
[ 20.852] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 20.852] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.852] (--) evdev: Power Button: Found keys
[ 20.852] (II) evdev: Power Button: Configuring as keyboard
[ 20.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0/event0"
[ 20.852] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 20.852] (**) Option "xkb_rules" "evdev"
[ 20.853] (**) Option "xkb_model" "pc105"
[ 20.853] (**) Option "xkb_layout" "pl"
[ 20.853] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 20.853] (II) No input driver specified, ignoring this device.
[ 20.853] (II) This device may have been added with another device file.
[ 20.853] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 20.853] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.853] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.853] (**) Sleep Button: always reports core events
[ 20.853] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 20.853] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 20.853] (--) evdev: Sleep Button: Found keys
[ 20.853] (II) evdev: Sleep Button: Configuring as keyboard
[ 20.853] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input2/event2"
[ 20.853] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 20.853] (**) Option "xkb_rules" "evdev"
[ 20.853] (**) Option "xkb_model" "pc105"
[ 20.853] (**) Option "xkb_layout" "pl"
[ 20.853] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 20.853] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.853] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.853] (**) Video Bus: always reports core events
[ 20.854] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 20.854] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 20.854] (--) evdev: Video Bus: Found keys
[ 20.854] (II) evdev: Video Bus: Configuring as keyboard
[ 20.854] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input14/event7"
[ 20.854] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 20.854] (**) Option "xkb_rules" "evdev"
[ 20.854] (**) Option "xkb_model" "pc105"
[ 20.854] (**) Option "xkb_layout" "pl"
[ 20.854] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[ 20.854] (II) No input driver specified, ignoring this device.
[ 20.854] (II) This device may have been added with another device file.
[ 20.854] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 20.854] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 20.854] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event11)
[ 20.854] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 20.854] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 20.854] (**) 1.3M WebCam: always reports core events
[ 20.854] (**) evdev: 1.3M WebCam: Device: "/dev/input/event11"
[ 20.854] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665
[ 20.854] (--) evdev: 1.3M WebCam: Found keys
[ 20.854] (II) evdev: 1.3M WebCam: Configuring as keyboard
[ 20.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input18/event11"
[ 20.854] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 11)
[ 20.854] (**) Option "xkb_rules" "evdev"
[ 20.854] (**) Option "xkb_model" "pc105"
[ 20.854] (**) Option "xkb_layout" "pl"
[ 20.855] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[ 20.855] (II) No input driver specified, ignoring this device.
[ 20.855] (II) This device may have been added with another device file.
[ 20.855] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 20.855] (II) No input driver specified, ignoring this device.
[ 20.855] (II) This device may have been added with another device file.
[ 20.855] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 20.855] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.855] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.855] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.855] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 20.855] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 20.855] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 20.855] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.855] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 20.855] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 20.855] (**) Option "xkb_rules" "evdev"
[ 20.855] (**) Option "xkb_model" "pc105"
[ 20.855] (**) Option "xkb_layout" "pl"
[ 20.856] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 20.856] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 20.856] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 20.856] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 20.856] (II) LoadModule: "synaptics"
[ 20.856] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.876] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.876] compiled for 1.14.2, module version = 1.7.1
[ 20.876] Module class: X.Org XInput Driver
[ 20.876] ABI class: X.Org XInput driver, version 19.1
[ 20.876] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 20.876] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 20.876] (**) Option "Device" "/dev/input/event5"
[ 20.888] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682 (res 55)
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692 (res 98)
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 20.888] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 20.888] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 20.900] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event5"
[ 20.900] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 20.900] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 20.900] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 20.900] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 20.900] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 20.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 20.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 20.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 20.900] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 20.900] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 20.900] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 20.901] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event12)
[ 20.902] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.902] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 20.902] (**) Acer WMI hotkeys: always reports core events
[ 20.902] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event12"
[ 20.902] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 20.902] (--) evdev: Acer WMI hotkeys: Found keys
[ 20.902] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 20.902] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event12"
[ 20.902] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 20.902] (**) Option "xkb_rules" "evdev"
[ 20.902] (**) Option "xkb_model" "pc105"
[ 20.902] (**) Option "xkb_layout" "pl"
[ 20.902] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event13)
[ 20.902] (II) No input driver specified, ignoring this device.
[ 20.902] (II) This device may have been added with another device file.
[ 20.902] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 20.902] (II) No input driver specified, ignoring this device.
[ 20.902] (II) This device may have been added with another device file.
[ 41.937] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 41.937] (II) intel(0): Printing DDC gathered Modelines:
[ 41.937] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 42.163] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 42.163] (II) intel(0): Printing DDC gathered Modelines:
[ 42.163] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 44.451] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 44.451] (II) intel(0): Printing DDC gathered Modelines:
[ 44.451] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.014] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.014] (II) intel(0): Printing DDC gathered Modelines:
[ 46.015] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.026] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.026] (II) intel(0): Printing DDC gathered Modelines:
[ 46.026] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.039] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.039] (II) intel(0): Printing DDC gathered Modelines:
[ 46.039] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.050] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.050] (II) intel(0): Printing DDC gathered Modelines:
[ 46.050] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.396] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.396] (II) intel(0): Printing DDC gathered Modelines:
[ 46.396] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 46.410] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 46.411] (II) intel(0): Printing DDC gathered Modelines:
[ 46.411] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 193.942] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 193.942] (II) intel(0): Printing DDC gathered Modelines:
[ 193.942] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 193.943] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 193.943] (II) intel(0): Printing DDC gathered Modelines:
[ 193.944] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 1210.109] (II) intel(0): EDID vendor "CMO", prod id 5207
[ 1210.109] (II) intel(0): Printing DDC gathered Modelines:
[ 1210.109] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
Tak powinna się prezentować karta?
Kod: Zaznacz cały
[ 19.940] (--) PCI: (0:1:0:0) 1002:68c1:1025:0359 rev 0, Mem @ 0xd0000000/134217728, 0xdc400000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
Kod: Zaznacz cały
[ 20.654] (EE) GLX error: Can not get required symbols.