Kod: Zaznacz cały
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 12856 23353987Kod: Zaznacz cały
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-19-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3500320AS
Serial Number: 9QM3ELLN
LU WWN Device Id: 5 000c50 00cc70f66
Firmware Version: SD15
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Tue Apr 8 11:59:53 2014 UTC
==> WARNING: There are known problems with these drives,
THIS DRIVE MAY OR MAY NOT BE AFFECTED,
see the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632758
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 650) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 085 085 006 Pre-fail Always - 21179952
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3448
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1149
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 4529925938
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12856
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 4
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3447
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 034 034 000 Old_age Always - 66
188 Command_Timeout 0x0032 100 090 000 Old_age Always - 8590072476
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 065 058 045 Old_age Always - 35 (Min/Max 26/35)
194 Temperature_Celsius 0x0022 035 042 000 Old_age Always - 35 (0 18 0 0 0)
195 Hardware_ECC_Recovered 0x001a 037 024 000 Old_age Always - 21179952
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 12
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 12
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 66 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 66 occurred at disk power-on lifetime: 12856 hours (535 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:50:30.788 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:50:11.611 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:50:11.603 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:50:11.595 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:50:11.595 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 65 occurred at disk power-on lifetime: 12856 hours (535 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:50:08.083 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:50:08.082 WRITE FPDMA QUEUED
61 00 18 ff ff ff 4f 00 00:50:08.082 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:50:08.081 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:50:08.079 WRITE FPDMA QUEUED
Error 64 occurred at disk power-on lifetime: 12856 hours (535 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:50:03.991 READ FPDMA QUEUED
60 00 28 ff ff ff 4f 00 00:50:03.991 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:50:03.924 READ FPDMA QUEUED
60 00 28 ff ff ff 4f 00 00:50:03.774 READ FPDMA QUEUED
60 00 18 ff ff ff 4f 00 00:50:03.773 READ FPDMA QUEUED
Error 63 occurred at disk power-on lifetime: 12856 hours (535 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:49:19.709 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:49:19.709 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:49:19.701 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:49:19.693 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:49:19.693 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 62 occurred at disk power-on lifetime: 12856 hours (535 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 ff ff ff 4f 00 00:49:16.327 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:49:15.252 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 00:49:14.686 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:49:14.069 READ FPDMA QUEUED
60 00 20 ff ff ff 4f 00 00:49:14.035 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 12856 23353987
# 2 Extended offline Completed: read failure 90% 12856 23353987
# 3 Extended offline Completed without error 00% 12209 -
# 4 Conveyance offline Completed without error 00% 12207 -
# 5 Short offline Completed without error 00% 12207 -
# 6 Extended offline Completed without error 00% 5960 -
# 7 Conveyance offline Completed without error 00% 5959 -
# 8 Extended offline Aborted by host 90% 5959 -
# 9 Extended offline Aborted by host 90% 5959 -
#10 Short offline Completed without error 00% 5958 -
#11 Short offline Completed without error 00% 5488 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.(pisze z liveusb, bez polfontow)
