Mam problem z połączeniem się z moją siecią bezprzewodową. Zarówno network-manager jak i wicd widzą sieci w pobliżu, jednak nie mogą się z nią połączyć.
Sieć jest zabezpieczona przez WEP. Karta sieciowa to DWL-G520+. Router Dl-624+.
Kiedy w wicd ustanowię połączenie Ad-Hoc lub gdy zedytuję plik /etc/network/interfaces tak jak jest tutaj, to wicd łączy się z siecią, ale nadal nie mogę korzystać z internetu.
http://i44.tinypic.com/2nhm684.jpg (obrazek nie wyświetla się pod IE i chrome)
/etc/network/interfaces:
Kod: Zaznacz cały
auto lo
iface lo inet loopback
allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 192.168.0.101
netmask 255.255.255.0
network 192.168.0.100
broadcast 192.168.0.199
gateway 192.168.0.1
wireless_mode managed
wireless_channel 6
wireless_essid gentoo
wireless_rate auto
wireless_key xxx
Kod: Zaznacz cały
# wicd-client
Loading...
Attempting to connect tray to daemon...
Success.
Done.
/usr/share/wicd/wicd/gui.py:1166: GtkWarning: gtk_toolbar_set_icon_size: assertion `icon_size != GTK_ICON_SIZE_INVALID' failed
self.wTree = gtk.glade.XML(gladefile)
refreshing...
======= gentoo ========
======= <hidden> ========
======= Vip-Dog ========
======= 3Com ========
Traceback (most recent call last):
File "/usr/share/wicd/wicd/gui.py", line 1576, in update_statusbar
iwconfig = wireless.GetIwconfig()
File "/var/lib/python-support/python2.6/dbus/proxies.py", line 140, in __call__
**keywords)
File "/var/lib/python-support/python2.6/dbus/connection.py", line 622, in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Segmentation fault
root@fenixon-desktop:/home/fenixon# Jeszcze tylko iwconfig, ifconfig i iwlist scan:
Kod: Zaznacz cały
root@fenixon-desktop:/home/fenixon# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11b+/g+ ESSID:"gentoo" Nickname:"acx v0.3.36"
Mode:Ad-Hoc Frequency:2.437 GHz Cell: 02:13:46:B0:AB:87
Bit Rate:54 Mb/s Tx-Power=15 dBm Sensitivity=1/3
Retry min limit:7 RTS thr:off
Encryption key:AD86-FFEC-75 Security mode:open
Power Management:off
Link Quality=31/100 Signal level=4/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
pan0 no wireless extensions.
Kod: Zaznacz cały
root@fenixon-desktop:/home/fenixon# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1d:7d:05:be:73
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:251 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:13:46:b0:ab:87
inet6 addr: fe80::213:46ff:feb0:ab87/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:468 (468.0 B)
Interrupt:20 Base address:0x4000
Kod: Zaznacz cały
root@fenixon-desktop:/home/fenixon# iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:19:E0:64:8B:CE
ESSID:"Vip-Dog"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=31/100 Signal level=3/100 Noise level=0/100
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Cell 02 - Address: 00:15:E9:62:79:F8
ESSID:"gentoo"
Mode:Master
Frequency:2.437 GHz (Channel 6)
Quality=49/100 Signal level=28/100 Noise level=0/100
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Cell 03 - Address: 00:08:A1:BC:91:C2
ESSID:""
Mode:Master
Frequency:2.462 GHz (Channel 11)
Quality=33/100 Signal level=6/100 Noise level=0/100
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
pan0 Interface doesn't support scanning.
