Reinstalowałem system ponownie. Nadal rozdzielczość 640x480 i nie można więcej. Wiem że jak się wyloguję to już system się nie zbootuje. Podejrzewam, że mam coś z tymi sterownikami nie tak. W HUDzie wpisuję drivers i w oknie mam do wyboru 3 wersje sterownika do tej mojej karty: binary driver wersja 340.101 , server X od X.org novueau ( aktualnie używany ) oraz binary driver wersja 304.134. Niestety nie mogę zmienić na żaden inny bo po próbie zaakceptowania zmiany sterownika system nie aplikuje zmiany. Co ciekawe pod sterownikami do wyboru mam jeszcze jedną opcję. Urządzenie nieznane i pod tym dwie opcje wyboru: nie używać urządzenia oraz Używanie processor microcode firmware for AMD CPUs z amd64-microcode. Niestety uruchomienie tego urządzenia też jest niemożliwe. Podaję zawartość pliku /var/log/Xorg.0.log:
Kod: Zaznacz cały
[ 25.690]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 25.690] X Protocol Version 11, Revision 0
[ 25.690] Build Operating System: Linux 3.13.0-86-generic x86_64 Ubuntu
[ 25.690] Current Operating System: Linux robert 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64
[ 25.690] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=9ccc377e-f138-44d7-91c0-c08710fff063 ro nomodeset quiet splash vt.handoff=7
[ 25.690] Build Date: 18 May 2016 01:07:07AM
[ 25.690] xorg-server 2:1.18.3-1ubuntu2.2 (For technical support please see http://www.ubuntu.com/support)
[ 25.690] Current version of pixman: 0.33.6
[ 25.690] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.690] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.690] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 9 11:44:01 2017
[ 25.802] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.030] (==) No Layout section. Using the first Screen section.
[ 26.030] (==) No screen section available. Using defaults.
[ 26.030] (**) |-->Screen "Default Screen Section" (0)
[ 26.030] (**) | |-->Monitor "<default monitor>"
[ 26.063] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.063] (==) Automatically adding devices
[ 26.063] (==) Automatically enabling devices
[ 26.063] (==) Automatically adding GPU devices
[ 26.063] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 26.064] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 26.064] Entry deleted from font path.
[ 26.064] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 26.064] Entry deleted from font path.
[ 26.064] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 26.064] Entry deleted from font path.
[ 26.064] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 26.064] Entry deleted from font path.
[ 26.064] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 26.064] Entry deleted from font path.
[ 26.064] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 26.064] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 26.064] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.064] (II) Loader magic: 0x55abd211fda0
[ 26.064] (II) Module ABI versions:
[ 26.064] X.Org ANSI C Emulation: 0.4
[ 26.064] X.Org Video Driver: 20.0
[ 26.064] X.Org XInput driver : 22.1
[ 26.064] X.Org Server Extension : 9.0
[ 26.065] (++) using VT number 7
[ 26.065] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 26.066] (--) PCI:*(0:4:0:0) 10de:0421:0000:0000 rev 161, Mem @ 0xdf000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 26.066] (II) LoadModule: "glx"
[ 26.169] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.747] (II) Module glx: vendor="X.Org Foundation"
[ 26.747] compiled for 1.18.3, module version = 1.0.0
[ 26.747] ABI class: X.Org Server Extension, version 9.0
[ 26.747] (==) AIGLX enabled
[ 26.747] (==) Matched nvidia as autoconfigured driver 0
[ 26.747] (==) Matched nouveau as autoconfigured driver 1
[ 26.747] (==) Matched modesetting as autoconfigured driver 2
[ 26.747] (==) Matched fbdev as autoconfigured driver 3
[ 26.747] (==) Matched vesa as autoconfigured driver 4
[ 26.747] (==) Assigned the driver to the xf86ConfigLayout
[ 26.747] (II) LoadModule: "nvidia"
[ 26.763] (WW) Warning, couldn't open module nvidia
[ 26.763] (II) UnloadModule: "nvidia"
[ 26.763] (II) Unloading nvidia
[ 26.763] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 26.763] (II) LoadModule: "nouveau"
[ 26.764] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 26.811] (II) Module nouveau: vendor="X.Org Foundation"
[ 26.811] compiled for 1.18.1, module version = 1.0.12
[ 26.811] Module class: X.Org Video Driver
[ 26.811] ABI class: X.Org Video Driver, version 20.0
[ 26.811] (II) LoadModule: "modesetting"
[ 26.812] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.849] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.849] compiled for 1.18.3, module version = 1.18.3
[ 26.849] Module class: X.Org Video Driver
[ 26.849] ABI class: X.Org Video Driver, version 20.0
[ 26.849] (II) LoadModule: "fbdev"
[ 26.849] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.867] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.867] compiled for 1.18.1, module version = 0.4.4
[ 26.867] Module class: X.Org Video Driver
[ 26.867] ABI class: X.Org Video Driver, version 20.0
[ 26.867] (II) LoadModule: "vesa"
[ 26.867] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.876] (II) Module vesa: vendor="X.Org Foundation"
[ 26.876] compiled for 1.18.1, module version = 2.3.4
[ 26.876] Module class: X.Org Video Driver
[ 26.876] ABI class: X.Org Video Driver, version 20.0
[ 26.876] (==) Matched nvidia as autoconfigured driver 0
[ 26.876] (==) Matched nouveau as autoconfigured driver 1
[ 26.876] (==) Matched modesetting as autoconfigured driver 2
[ 26.876] (==) Matched fbdev as autoconfigured driver 3
[ 26.876] (==) Matched vesa as autoconfigured driver 4
[ 26.876] (==) Assigned the driver to the xf86ConfigLayout
[ 26.876] (II) LoadModule: "nvidia"
[ 26.876] (WW) Warning, couldn't open module nvidia
[ 26.876] (II) UnloadModule: "nvidia"
[ 26.876] (II) Unloading nvidia
[ 26.876] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 26.876] (II) LoadModule: "nouveau"
[ 26.876] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 26.876] (II) Module nouveau: vendor="X.Org Foundation"
[ 26.877] compiled for 1.18.1, module version = 1.0.12
[ 26.877] Module class: X.Org Video Driver
[ 26.877] ABI class: X.Org Video Driver, version 20.0
[ 26.877] (II) UnloadModule: "nouveau"
[ 26.877] (II) Unloading nouveau
[ 26.877] (II) Failed to load module "nouveau" (already loaded, 0)
[ 26.877] (II) LoadModule: "modesetting"
[ 26.877] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.877] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.877] compiled for 1.18.3, module version = 1.18.3
[ 26.877] Module class: X.Org Video Driver
[ 26.877] ABI class: X.Org Video Driver, version 20.0
[ 26.877] (II) UnloadModule: "modesetting"
[ 26.877] (II) Unloading modesetting
[ 26.877] (II) Failed to load module "modesetting" (already loaded, 0)
[ 26.877] (II) LoadModule: "fbdev"
[ 26.877] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.877] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.877] compiled for 1.18.1, module version = 0.4.4
[ 26.877] Module class: X.Org Video Driver
[ 26.877] ABI class: X.Org Video Driver, version 20.0
[ 26.877] (II) UnloadModule: "fbdev"
[ 26.877] (II) Unloading fbdev
[ 26.877] (II) Failed to load module "fbdev" (already loaded, 0)
[ 26.877] (II) LoadModule: "vesa"
[ 26.877] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.877] (II) Module vesa: vendor="X.Org Foundation"
[ 26.877] compiled for 1.18.1, module version = 2.3.4
[ 26.877] Module class: X.Org Video Driver
[ 26.877] ABI class: X.Org Video Driver, version 20.0
[ 26.877] (II) UnloadModule: "vesa"
[ 26.877] (II) Unloading vesa
[ 26.877] (II) Failed to load module "vesa" (already loaded, 0)
[ 26.877] (II) NOUVEAU driver Date: Tue Dec 8 15:52:25 2015 +1000
[ 26.877] (II) NOUVEAU driver for NVIDIA chipset families :
[ 26.877] RIVA TNT (NV04)
[ 26.877] RIVA TNT2 (NV05)
[ 26.877] GeForce 256 (NV10)
[ 26.877] GeForce 2 (NV11, NV15)
[ 26.877] GeForce 4MX (NV17, NV18)
[ 26.877] GeForce 3 (NV20)
[ 26.877] GeForce 4Ti (NV25, NV28)
[ 26.877] GeForce FX (NV3x)
[ 26.878] GeForce 6 (NV4x)
[ 26.878] GeForce 7 (G7x)
[ 26.878] GeForce 8 (G8x)
[ 26.878] GeForce GTX 200 (NVA0)
[ 26.878] GeForce GTX 400 (NVC0)
[ 26.878] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.878] (II) FBDEV: driver for framebuffer: fbdev
[ 26.878] (II) VESA: driver for VESA chipsets: vesa
[ 27.008] (EE) [drm] Failed to open DRM device for pci:0000:04:00.0: -19
[ 27.147] (EE) [drm] Failed to open DRM device for pci:0000:04:00.0: -19
[ 27.147] (EE) open /dev/dri/card0: No such file or directory
[ 27.147] (EE) open /dev/dri/card0: No such file or directory
[ 27.147] (WW) Falling back to old probe method for modesetting
[ 27.147] (EE) open /dev/dri/card0: No such file or directory
[ 27.147] (EE) open /dev/dri/card0: No such file or directory
[ 27.147] (II) Loading sub module "fbdevhw"
[ 27.147] (II) LoadModule: "fbdevhw"
[ 27.147] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27.156] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27.156] compiled for 1.18.3, module version = 0.0.2
[ 27.156] ABI class: X.Org Video Driver, version 20.0
[ 27.156] (**) FBDEV(2): claimed PCI slot 4@0:0:0
[ 27.156] (II) FBDEV(2): using default device
[ 27.156] (WW) Falling back to old probe method for vesa
[ 27.156] (EE) Screen 0 deleted because of no matching config section.
[ 27.156] (II) UnloadModule: "modesetting"
[ 27.156] (EE) Screen 0 deleted because of no matching config section.
[ 27.156] (II) UnloadModule: "modesetting"
[ 27.156] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.156] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 27.156] (==) FBDEV(0): RGB weight 888
[ 27.156] (==) FBDEV(0): Default visual is TrueColor
[ 27.156] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.156] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB)
[ 27.156] (II) FBDEV(0): checking modes against framebuffer device...
[ 27.156] (II) FBDEV(0): checking modes against monitor...
[ 27.156] (--) FBDEV(0): Virtual size is 640x480 (pitch 640)
[ 27.156] (**) FBDEV(0): Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[ 27.156] (II) FBDEV(0): Modeline "current"x0.0 30.72 640 672 752 832 480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[ 27.156] (==) FBDEV(0): DPI set to (96, 96)
[ 27.156] (II) Loading sub module "fb"
[ 27.156] (II) LoadModule: "fb"
[ 27.156] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.158] (II) Module fb: vendor="X.Org Foundation"
[ 27.158] compiled for 1.18.3, module version = 1.0.0
[ 27.158] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.158] (**) FBDEV(0): using shadow framebuffer
[ 27.158] (II) Loading sub module "shadow"
[ 27.158] (II) LoadModule: "shadow"
[ 27.159] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 27.162] (II) Module shadow: vendor="X.Org Foundation"
[ 27.162] compiled for 1.18.3, module version = 1.1.0
[ 27.162] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.162] (II) UnloadModule: "vesa"
[ 27.162] (II) Unloading vesa
[ 27.162] (==) Depth 24 pixmap format is 32 bpp
[ 27.162] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 27.184] (==) FBDEV(0): Backing store enabled
[ 27.185] (==) FBDEV(0): DPMS enabled
[ 27.185] (==) RandR enabled
[ 27.192] (II) SELinux: Disabled on system
[ 27.193] (II) AIGLX: Screen 0 is not DRI2 capable
[ 27.193] (EE) AIGLX: reverting to software rendering
[ 28.184] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.185] (II) AIGLX: Loaded and initialized swrast
[ 28.185] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 28.413] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 28.413] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.413] (II) LoadModule: "evdev"
[ 28.413] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.442] (II) Module evdev: vendor="X.Org Foundation"
[ 28.442] compiled for 1.18.1, module version = 2.10.1
[ 28.442] Module class: X.Org XInput Driver
[ 28.442] ABI class: X.Org XInput driver, version 22.1
[ 28.442] (II) Using input driver 'evdev' for 'Power Button'
[ 28.442] (**) Power Button: always reports core events
[ 28.442] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 28.442] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.442] (--) evdev: Power Button: Found keys
[ 28.442] (II) evdev: Power Button: Configuring as keyboard
[ 28.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 28.442] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.442] (**) Option "xkb_rules" "evdev"
[ 28.442] (**) Option "xkb_model" "pc105"
[ 28.442] (**) Option "xkb_layout" "pl"
[ 28.475] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 28.475] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.475] (II) Using input driver 'evdev' for 'Power Button'
[ 28.475] (**) Power Button: always reports core events
[ 28.475] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 28.475] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.475] (--) evdev: Power Button: Found keys
[ 28.475] (II) evdev: Power Button: Configuring as keyboard
[ 28.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 28.475] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 28.475] (**) Option "xkb_rules" "evdev"
[ 28.475] (**) Option "xkb_model" "pc105"
[ 28.475] (**) Option "xkb_layout" "pl"
[ 28.476] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event2)
[ 28.476] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.476] (II) Using input driver 'evdev' for 'SEM USB Keyboard'
[ 28.477] (**) SEM USB Keyboard: always reports core events
[ 28.477] (**) evdev: SEM USB Keyboard: Device: "/dev/input/event2"
[ 28.477] (--) evdev: SEM USB Keyboard: Vendor 0x1a2c Product 0x2124
[ 28.477] (--) evdev: SEM USB Keyboard: Found keys
[ 28.477] (II) evdev: SEM USB Keyboard: Configuring as keyboard
[ 28.477] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:1A2C:2124.0001/input/input5/event2"
[ 28.477] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 8)
[ 28.477] (**) Option "xkb_rules" "evdev"
[ 28.477] (**) Option "xkb_model" "pc105"
[ 28.477] (**) Option "xkb_layout" "pl"
[ 28.478] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event3)
[ 28.478] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.478] (II) Using input driver 'evdev' for 'SEM USB Keyboard'
[ 28.478] (**) SEM USB Keyboard: always reports core events
[ 28.478] (**) evdev: SEM USB Keyboard: Device: "/dev/input/event3"
[ 28.478] (--) evdev: SEM USB Keyboard: Vendor 0x1a2c Product 0x2124
[ 28.478] (--) evdev: SEM USB Keyboard: Found 1 mouse buttons
[ 28.478] (--) evdev: SEM USB Keyboard: Found scroll wheel(s)
[ 28.478] (--) evdev: SEM USB Keyboard: Found relative axes
[ 28.478] (II) evdev: SEM USB Keyboard: Forcing relative x/y axes to exist.
[ 28.478] (--) evdev: SEM USB Keyboard: Found absolute axes
[ 28.478] (II) evdev: SEM USB Keyboard: Forcing absolute x/y axes to exist.
[ 28.478] (--) evdev: SEM USB Keyboard: Found keys
[ 28.478] (II) evdev: SEM USB Keyboard: Configuring as mouse
[ 28.478] (II) evdev: SEM USB Keyboard: Configuring as keyboard
[ 28.478] (II) evdev: SEM USB Keyboard: Adding scrollwheel support
[ 28.478] (**) evdev: SEM USB Keyboard: YAxisMapping: buttons 4 and 5
[ 28.478] (**) evdev: SEM USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:1A2C:2124.0002/input/input6/event3"
[ 28.478] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 9)
[ 28.478] (**) Option "xkb_rules" "evdev"
[ 28.478] (**) Option "xkb_model" "pc105"
[ 28.478] (**) Option "xkb_layout" "pl"
[ 28.479] (II) evdev: SEM USB Keyboard: initialized for relative axes.
[ 28.479] (WW) evdev: SEM USB Keyboard: ignoring absolute axes.
[ 28.479] (**) SEM USB Keyboard: (accel) keeping acceleration scheme 1
[ 28.479] (**) SEM USB Keyboard: (accel) acceleration profile 0
[ 28.479] (**) SEM USB Keyboard: (accel) acceleration factor: 2.000
[ 28.479] (**) SEM USB Keyboard: (accel) acceleration threshold: 4
[ 28.479] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event8)
[ 28.479] (II) No input driver specified, ignoring this device.
[ 28.479] (II) This device may have been added with another device file.
[ 28.480] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[ 28.480] (II) No input driver specified, ignoring this device.
[ 28.480] (II) This device may have been added with another device file.
[ 28.480] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event5)
[ 28.480] (II) No input driver specified, ignoring this device.
[ 28.480] (II) This device may have been added with another device file.
[ 28.481] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6)
[ 28.481] (II) No input driver specified, ignoring this device.
[ 28.481] (II) This device may have been added with another device file.
[ 28.481] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 28.481] (II) No input driver specified, ignoring this device.
[ 28.481] (II) This device may have been added with another device file.
[ 28.481] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[ 28.481] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 28.481] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 28.481] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 28.481] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
[ 28.481] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 28.481] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 28.481] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 28.481] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 28.482] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 28.482] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 28.482] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 28.482] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 28.482] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.482] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 28.482] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 28.482] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 28.482] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 28.482] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 28.482] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 28.482] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 28.482] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 28.482] (II) No input driver specified, ignoring this device.
[ 28.482] (II) This device may have been added with another device file.
Nie wiem czy zawartość tego pliku zmienia się wraz z próbami bootowanie przeze mnie więc jeśli będzie trzeba podam Ci go jeszcze po tym jak system się przewróci.