lubsudo sh /ścieżka do pliku/install.sh
Kod:
sudo sh install.sh
**** Do you agree ? [y/n] : y
**** Are you going to use network devices ? If yes, it is recommended to configure your firewall.
**** If you want to configure firewall automatically, enter 'y' or just press 'Enter'. To skip, enter 'n'. : y
**** Registering CUPS backend ...
**** CUPS restart OK.
**** Print driver has been installed successfully.
**** Registering SANE backend ...
**** Restarting udev ...
**** Scan driver has been installed successfully.
**** Install finished.
Statystyki: autor: lcoyote — 11 lis 2021, 20:37
Statystyki: autor: mario_7 — 27 lut 2020, 14:43
Kod:
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceCompositionPipeline = On }"
Kod:
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
Kod:
Option "RegistryDwords" "EnableBrightnessControl=1"
Kod:
Option "NoLogo" "True"
Kod:
# nvidia-settings: X configuration file generated by nvidia-settings# nvidia-settings: version 361.42 (buildd@lgw01-18) Tue Apr 5 14:33:28 UTC 2016Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0"EndSectionSection "Files"EndSectionSection "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx"EndSectionSection "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5"EndSectionSection "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd"EndSectionSection "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Seiko/Epson" HorizSync 30.0 - 75.0 VertRefresh 59.0 Option "DPMS"EndSectionSection "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 330M" Option "NoLogo" "True" Option "RegistryDwords" "EnableBrightnessControl=1"EndSectionSection "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}" Option "AllowIndirectGLXProtocol" "off" Option "TripleBuffer" "on" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSectionEndSection
Statystyki: autor: kobrawerde — 22 kwie 2019, 13:19
Kod:
sudo apt install dkms
Kod:
sudo dkms add .sudo dkms build hid-apple/1.0sudo dkms install hid-apple/1.0
Kod:
sudo nano /etc/modprobe.d/hid_apple.conf
Kod:
options hid_apple fnmode=2options hid_apple swap_fn_leftctrl=1options hid_apple swap_opt_cmd=1options hid_apple rightalt_as_rightctrl=1options hid_apple ejectcd_as_delete=1
Kod:
sudo update-initramfs -u
Kod:
sudo modprobe -r hid_apple; sudo modprobe hid_apple
Kod:
sudo modprobe -r hid_apple; sudo modprobe hid_apple
Statystyki: autor: salemus — 20 kwie 2019, 21:01
Kod:
sudo rmdir /usr/share/ghostscript/9.25/iccprofilessudo apt-get install --reinstall libgs9-common
Statystyki: autor: mario_7 — 16 paź 2018, 22:09
Kod:
sudo mkdir -p /etc/X11/xorg.conf.d/cat <<EOF | sudo tee /etc/X11/xorg.conf.d/00-joystick-disable-mouse.confSection "InputClass" Identifier "joystick catchall" MatchIsJoystick "on" MatchDevicePath "/dev/input/event*" Driver "joystick" Option "StartKeysEnabled" "False" #Disable mouse Option "StartMouseEnabled" "False" #supportEndSectionEOF
Po ponownym zalogowaniu do systemu joystick/gamepad nie będzie już sterował myszą.Statystyki: autor: mario_7 — 09 wrz 2018, 19:52
Kod:
sudo apt install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04
Kod:
sudo add-apt-repository ppa:graphics-drivers/ppasudo apt updatesudo apt install nvidia-driver-396 # może być już dostępny nowszy sterownik!
Kod:
sudo add-apt-repository ppa:oibaf/graphics-driverssudo apt updatesudo apt upgradesudo apt dist-upgrade
Kod:
sudo apt install libegl1-mesa libegl1-mesa:i386 libwayland-egl1 libgtk-3-0:i386 libsdl2-2.0-0:i386
Kod:
echo "options nvidia_396_drm modeset=1" | sudo tee /etc/modprobe.d/zz-nvidia-modeset.confsudo update-initramfs -u
Kod:
echo "options nvidia_drm modeset=1" | sudo tee /etc/modprobe.d/zz-nvidia-modeset.confsudo update-initramfs -u
Kod:
xrandr --verbose | grep PRIME
Kod:
PRIME Synchronization: 1
Kod:
sudo cat /sys/module/nvidia_396_drm/parameters/modeset
Kod:
sudo cat /sys/module/nvidia_drm/parameters/modeset
Kod:
sudo gedit /etc/default/grub
Kod:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Kod:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nvidia-396-drm.modeset=1"
Kod:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nvidia-drm.modeset=1"
Kod:
sudo update-grub
Kod:
xrandr --verbose | grep PRIME
Kod:
PRIME Synchronization: 1
Kod:
sudo vulkaninfo
Kod:
sudo apt install vulkan-tools
Statystyki: autor: mario_7 — 28 sie 2018, 23:14
Statystyki: autor: ShogunToyo — 01 lut 2015, 12:05
Kod:
echo -e "blacklist amd76x_edac\nblacklist vga16fb\nblacklist nouveau\nblacklist rivafb\nblacklist nvidiafb\nblacklist rivatv" | sudo tee /etc/modprobe.d/blacklist-nouveau.conf
Kod:
udo apt-get remove --purge nvidia*
Kod:
sudo add-apt-repository ppa:bumblebee/stablesudo apt-get updatesudo apt-get install bumblebee bumblebee-nvidia primus linux-headers-genericsudo reboot
Kod:
lsmod | grep nouveau
Kod:
sudo gedit /etc/default/grub
Kod:
GRUB_CMDLINE_LINUX=""
Kod:
pcie_aspm=force acpi_osi='!Windows 2012' acpi=force acpi_enforce_resources=lax i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1
Kod:
pcie_aspm=force acpi_osi='!Windows 2012' acpi=force acpi_enforce_resources=lax i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1 drm.vblankoffdelay=1 acpi_backlight=vendor
Kod:
pcie_aspm=force acpi_osi='!Windows 2012' acpi_enforce_resources=lax
Kod:
pcie_aspm=force acpi_osi='!Windows 2012' acpi_enforce_resources=lax acpi_backlight=vendor
Kod:
GRUB_DEFAULT=0#GRUB_HIDDEN_TIMEOUT=0GRUB_HIDDEN_TIMEOUT_QUIET=trueGRUB_TIMEOUT=10GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`GRUB_CMDLINE_LINUX_DEFAULT="splash quiet"GRUB_CMDLINE_LINUX="pcie_aspm=force acpi_osi='!Windows 2012' acpi_enforce_resources=lax acpi_backlight=vendor"
Kod:
sudo update-grub
Statystyki: autor: Bury91 — 22 kwie 2014, 00:57
Kod:
sudo mkdir /usr/share/cups/model
Kod:
sudo ln -s /etc/init.d/cups /etc/init.d/lpd
Kod:
sudo mkdir /var/spool/lpd
Kod:
sudo apt-get install lib32stdc++
Kod:
sudo apt-get install sane-utils
Kod:
sudo apt-get install psutils
Kod:
ls
Kod:
sudo rpm -ihv --nodeps (nazwaplikuwaszejdrukarki - dość długa)
Kod:
sudo rpm -ihv --nodeps (nazwaplikucupswrapper - też długa)
Statystyki: autor: wrednydziadzio — 05 sty 2014, 15:57
Kod:
Radeon 9500Radeon 9500 ProRadeon 9700Radeon 9700 ProRadeon 9600Radeon 9600 ProRadeon 9800Radeon 9800 ProRadeon 9800 XTRadeon Xpress 200MRadeon X300Radeon X550Radeon X1050Radeon X600, M24Radeon XPRESS 200/200M IGPRadeon X700, M26 PCIERadeon X800 AGPRadeon X800, M28 PCIERadeon X850 PCIE/AGPRadeon X1550, X1550 64bitRadeon X1300, X1400, X1550, X1600; FireGL V3300, V3350Radeon X1300, X1550, X1550 64bit, X1600; FireMV 2250Radeon X1800; FireGL V5300, V7200, V7300, V7350Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200Radeon X1300, X1650Radeon X2300 HDRadeon X1650Radeon X1950, X1950 GT; FireGL V7400Radeon X1900, X1950; AMD Stream Processor
To zapewne doświadczasz niższej niż oczekiwana wydajności sprzętu. Chociaż najlepszym rozwiązanie jest po prostu wymiana karty graficznej na nowy (wspierany) układ, to część z was może poeksperymentować, żeby zwiększyć ich wydajność.Kod:
sudo apt-get install libtxc-dxtn-s2tc0
Kod:
RADEON_HYPERZ=1 &>> ~/.pam_environment
Kod:
R600_HYPERZ=1 &>> ~/.pam_environment
Kod:
sudo gedit /etc/X11/xorg.conf
Kod:
# /etc/X11/xorg.confSection "Device"Identifier"Configured Video Device"Option"SwapbuffersWait" "False"Option"ColorTiling" "on"Option"EnablePageFlip" "on"Driver"radeon"EndSection
Statystyki: autor: makson — 24 paź 2012, 12:52
Kod:
sudo add-apt-repository ppa:makson96/fglrxsudo apt-get updatesudo apt-get install fglrx-legacy
Kod:
sudo apt-get remove fglrx-legacy
Statystyki: autor: makson — 20 paź 2012, 15:47
Kod:
sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases mesa-utils linux-headers-generic libgcc1
Kod:
sudo apt-get install ia32-libs-multiarch:i386 lib32gcc1 libc6-i386cd /usr ; sudo ln -svT lib /usr/lib64
Kod:
cd ~/; mkdir catalyst; cd catalyst/wget http://www2.ati.com/drivers/linux/amd-driver-installer-12-6-x86.x86_64.run
Kod:
chmod +x amd-driver-installer-12-6-x86.x86_64.runsudo sh ./amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precisesudo dpkg -i fglrx*.deb
Kod:
sudo aticonfig --initial -f
Kod:
echo "PCI:$(lspci | grep VGA | grep ATI | awk '{print $1}' | sed 's/\./:/')"
PCI:01:00:0
Kod:
Section "Device"Identifier "aticonfig-Device[0]-0"Driver "fglrx"BusID "PCI:1:0:0"
Kod:
gksu gedit /etc/X11/Xsession.d/10fglrx
Kod:
LIBGL_DRIVERS_PATH=/usr/lib/fglrx/dri if [ `uname -m` = 'x86_64' ]; then if [ -d /usr/lib32/fglrx/dri ]; then LIBGL_DRIVERS_PATH=${LIBGL_DRIVERS_PATH}:/usr/lib32/fglrx/dri:/usr/lib32/driif [ ! -z $LD_LIBRARY_PATH ]; then LD_LIBRARY_PATH=$LD_LIBRARY_PATH: fi LD_LIBRARY_PATH=${LD_LIBRARY_PATH}/usr/lib32 export LD_LIBRARY_PATH fi fi export LIBGL_DRIVERS_PATH
Kod:
LIBGL_DRIVERS_PATH=/usr/lib/fglrx/dri if [ `uname -m` = 'x86_64' ]; then if [ -d /usr/lib32/fglrx/dri ]; then LIBGL_DRIVERS_PATH=${LIBGL_DRIVERS_PATH}:/usr/lib32/fglrx/dri:/usr/lib/x86_64-linux-gnu/driif [ ! -z $LD_LIBRARY_PATH ]; then LD_LIBRARY_PATH=$LD_LIBRARY_PATH: fi LD_LIBRARY_PATH=${LD_LIBRARY_PATH}/usr/lib32export LD_LIBRARY_PATH fi fi export LIBGL_DRIVERS_PATH
Kod:
aticonfig --pxl
Kod:
sudo aticonfig --px-dgpu
Kod:
sudo aticonfig --px-igpu
Kod:
gksu amdcccle
Kod:
fglrxinfoglxinfo | grep -i '\(direct\|open\)'
Kod:
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.OLDsudo apt-get purge fglrx fglrx-amdcccle fglrx-devsudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core xserver-xorg-video-radeon xserver-xorg-video-intelsudo reboot
Statystyki: autor: brezniew — 20 cze 2012, 01:39
Kod:
sudo apt-get build-dep libgl1-mesa-dri libdrm2 xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-nouveau
Kod:
sudo apt-get install git libcairo2-dev mesa-utils libxcb-glx0-dev
Kod:
sudo apt-get --purge remove llvm
Kod:
sudo ln -s /usr/bin/llvm-config-3.0 /usr/bin/llvm-config
Kod:
cd ~/Pobrane
Kod:
git clone git://anongit.freedesktop.org/mesa/drm
Kod:
cd drm
Kod:
./autogen.sh
Kod:
./configure --enable-vmwgfx-experimental-api --prefix=/usr/local
Kod:
make
Kod:
sudo make install
Kod:
cd ~/Pobrane
Kod:
git clone git://anongit.freedesktop.org/mesa/mesa
Kod:
cd mesa
Kod:
./autogen.sh
Kod:
./configure --enable-texture-float --with-dri-drivers=i915,i965,nouveau,radeon,r200,swrast --with-gallium-drivers=i915,nouveau,r300,r600,radeonsi,svga,swrast
Kod:
make
Kod:
echo -e "LIBGL_DRIVERS_PATH=$HOME/Pobrane/mesa/lib" >> ~/.pam_environment
Kod:
echo -e "LIBGL_DRIVERS_PATH=$HOME/Pobrane/mesa/lib/gallium" >> ~/.pam_environment
Kod:
sudo mv /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2 /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2.backsudo cp ~/Pobrane/mesa/lib/libGL.so.1 /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2sudo mv /usr/lib/i386-linux-gnu/libGLU.so.1.3.08000 /usr/lib/i386-linux-gnu/libGLU.so.1.3.08000.backsudo cp ~/Pobrane/mesa/lib/libGLU.so.1.3.08000 /usr/lib/i386-linux-gnu/libGLU.so.1.3.08000sudo cp ~/Pobrane/mesa/lib/libglsl.so /usr/lib/i386-linux-gnu/sudo cp ~/Pobrane/mesa/lib/libdricore.so /usr/lib/i386-linux-gnu/
Kod:
sudo mv /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1.2 /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1.2.backsudo cp ~/Pobrane/mesa/lib/libGL.so.1 /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1.2sudo mv /usr/lib/x86_64-linux-gnu/libGLU.so.1.3.08000 /usr/lib/x86_64-linux-gnu/libGLU.so.1.3.08000.backsudo cp ~/Pobrane/mesa/lib/libGLU.so.1.3.08000 /usr/lib/x86_64-linux-gnu/libGLU.so.1.3.08000sudo cp ~/Pobrane/mesa/lib/libglsl.so /usr/lib/x86_64-linux-gnu/sudo cp ~/Pobrane/mesa/lib/libdricore.so /usr/lib/x86_64-linux-gnu/
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/xorg/driver/xf86-video-aticd xf86-video-ati
Kod:
cd ~/Pobranegit clonegit://anongit.freedesktop.org/xorg/driver/xf86-video-intelcd xf86-video-intel
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/nouveau/xf86-video-nouveaucd xf86-video-nouveau
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/xorg/driver/xf86-video-siscd xf86-video-sis
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/openchrome/xf86-video-openchromecd xf86-video-openchrome
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/xorg/driver/xf86-video-fbdevcd xf86-video-fbdev
Kod:
cd ~/Pobranegit clone git://anongit.freedesktop.org/xorg/driver/xf86-video-vesacd xf86-video-vesa
Kod:
./autogen.sh --prefix=/opt/xorgmakesudo make install
Kod:
sudo gedit /etc/X11/xorg.conf
Kod:
Section "Files" ModulePath "/opt/xorg/lib/xorg/modules,/usr/lib/xorg/modules"EndSection
Kod:
sudo add-apt-repository ppa:makson96/mesasudo apt-get updatesudo apt-get install libtxc-dxtn0
Kod:
sudo apt-get install driconf
Statystyki: autor: makson — 07 maja 2012, 20:41
Kod:
sudo dpkg-reconfigure linux-sound-base
Kod:
sudo apt-get install oss4-base oss4-dkms oss4-dev oss4-gtk
Kod:
sudo soundon
Kod:
sudo rm /usr/lib/oss/starting sudo soundon
Kod:
sudo gedit /etc/pulse/default.pa
Kod:
load-module module-oss device="/dev/dsp" sink_name=output source_name=input mmap=0
Kod:
sudo apt-get remove pulseaudio
Kod:
sudo apt-get install gstreamer0.10-plugins-badgstreamer-properties
Kod:
sudo gedit ~/.asoundrc
Kod:
pcm.!default { type oss device /dev/dsp } mixer.!default { type oss device /dev/dsp }
Kod:
/usr/bin/ossxmix
Statystyki: autor: makson — 15 kwie 2012, 13:42
Kod:
arecord --list-devices
Kod:
sudo gedit /etc/pulse/daemon.conf
Kod:
default-sample-rate = 44100
Kod:
ossplay /sciezka_do_dowolnego_pliku_wav
Kod:
osstest
Kod:
gstreamer-properties
Kod:
ossmix
Kod:
vmixctl attach device
Kod:
sudo gedit /etc/pulse/default.pa
Kod:
load-module module-oss device="/dev/dsp" sink_name=output source_name=input mmap=0
Kod:
pulseaudio
Statystyki: autor: Lapsio — 12 sty 2012, 18:30
Kod:
Models:Epson ME OFFICE 520Epson ME OFFICE 620FEpson Stylus NX220Epson Stylus Office BX305FEpson Stylus Office BX305FWEpson Stylus Office TX320FEpson Stylus Office TX325FEpson Stylus SX218Epson Stylus TX220Epson Stylus TX228WorkForce 320WorkForce 323WorkForce 325Packages:epson-inkjet-printer-workforce-320-sx218-1.0.0-1lsb3.2.i486.rpmepson-inkjet-printer-workforce-320-sx218_1.0.0-1lsb3.2_i386.debepson-inkjet-printer-workforce-320-sx218-1.0.0-1lsb3.2.x86_64.rpmepson-inkjet-printer-workforce-320-sx218_1.0.0-1lsb3.2_amd64.debepson-inkjet-printer-workforce-320-sx218-1.0.0-1lsb3.2.src.rpm
Kod:
dpkg - i epson-inkjet-printer-workforce-320-sx218_1.0.0-1lsb3.2_i386.deb
Statystyki: autor: kiprom — 16 gru 2011, 10:09
Kod:
/etc/sane.d/xerox_mfp.conf
Kod:
usb 0x04e8 0x3441
Statystyki: autor: Maciek Żabik — 21 lis 2011, 14:59
Kod:
lspci -k
W tej chwili używam sterownika "otwartego", czyli społecznościowego o nazwie radeon.01:00.0 VGA compatible controller: ATI Technologies Inc Barts PRO [ATI Radeon HD 6800 Series]
Subsystem: Giga-byte Technology Device 21f8
Kernel driver in use: radeon
Kernel modules: radeon
aby przekonać się, czy masz wsparcie dla OpenGL. Jak nie masz, to zainstaluj:OpenGL vendor string: X.OrgKod:
glxinfo | grep OpenGL
OpenGL renderer string: Gallium 0.4 on AMD BARTS
OpenGL version string: 2.1 Mesa 7.11
OpenGL shading language version string: 1.20
Kod:
sudo apt-get install mesa-utils
Kod:
sudo apt-get install fglrx fglrx-amdcccle
Kod:
sudo /usr/share/ati/fglrx-uninstall.shsudo apt-get remove --purge fglrx*sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
Kod:
sudo apt-get install xserver-xorg-video-atisudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-coresudo dpkg-reconfigure xserver-xorg
Statystyki: autor: igotit4free — 29 paź 2011, 15:58
*-druga pozycja dotyczy czipa na mojej karcie grafiki (HD6850), nie zajmuję się nią.lspci | grep Audio
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
01:00.1 Audio device: ATI Technologies Inc Device aa88*
Czyli poszukiwane to Intel Corporation Cougar Point High Definition Audio Controller i ALC889.Codec: Realtek ALC889Kod:
cat /proc/asound/card0/codec* | grep Codec
albo/usr/share/doc/alsa-base/driver/HD-Audio-Models.txt.gz
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz
w której jest mój poszukiwany => ALC889 oraz odpowiadający za jego pracę moduł => intel-x58ALC882/883/885/888/889
======================
...
3stack-6ch-intel Intel DG33* boards
intel-alc889aIntel IbexPeak with ALC889A
intel-x58Intel DX58 with ALC889
asus-p5qASUS P5Q-EM boards
...
Kod:
sudo gedit /etc/modprobe.d/alsa-base.conf
gdzie w polu za "model=" podaję odczytane poprzednio określenie modułu.options snd-hda-intel model=intel-x58
Kod:
sudo alsa force-reload
Statystyki: autor: igotit4free — 02 paź 2011, 11:17
Kod:
sudo add-apt-repository ppa:voria/ppa
Kod:
sudo apt-get update && sudo apt-get upgrade
Kod:
sudo apt-get install samsung-backlight
Statystyki: autor: blackhawk — 22 wrz 2011, 23:19
Kod:
Radeon 9500Radeon 9500 ProRadeon 9700Radeon 9700 ProRadeon 9600Radeon 9600 ProRadeon 9800Radeon 9800 ProRadeon 9800 XTRadeon Xpress 200MRadeon X300Radeon X550Radeon X1050Radeon X600, M24Radeon XPRESS 200/200M IGPRadeon X700, M26 PCIERadeon X800 AGPRadeon X800, M28 PCIERadeon X850 PCIE/AGPRadeon X1550, X1550 64bitRadeon X1300, X1400, X1550, X1600; FireGL V3300, V3350Radeon X1300, X1550, X1550 64bit, X1600; FireMV 2250Radeon X1800; FireGL V5300, V7200, V7300, V7350Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200Radeon X1300, X1650Radeon X2300 HDRadeon X1650Radeon X1950, X1950 GT; FireGL V7400Radeon X1900, X1950; AMD Stream Processor
Kod:
GMA 900GMA 950GMA 3000GMA 3100GMA 3150GMA X3000GMA X3100GMA X3500GMA 4500GMA X4500GMA X4500HDGMA 4500MHDHD Graphics (GMA HD)HD Graphics (Sandy Bridge)HD Graphics 2000HD Graphics 3000
Kod:
VMware's Gallium3D SVGA
Kod:
Software Rasterizerllvmpipe
Kod:
sudo apt-get install mesa-utils
Kod:
glxinfo | grep GL_
To znaczy, że wszystko się udało. Gry, które opcjonalnie korzystają z S3TC (np. 0 AD), będą działać wyraźnie szybciej, a tytuły które koniecznie wymagają tego rozszerzenia, będą się wreszcie uruchamiać....
GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATI_separate_stencil,
GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays,
GL_S3_s3tc
Statystyki: autor: makson — 22 wrz 2011, 18:01
Kod:
sudo ./install.sh
Kod:
optirun32 nazwa_aplikacji
Kod:
optirun64 nazwa_aplikacji
Kod:
Urządzenie Użytkownik (zgłaszający)Alienware M11X R2 Martin JuhlAsus N82Jv André VenturaAsus EeePC 1215N Ellington SantosAsus N61Jv (X64Jv) TedAcer Aspire 5745PG Miguel BelmonteDell Vostro 3300 Peter LiedlerAsus EeePC 1215N Fedor IndutnyDell XPS 15 (L502x) Sunil MujumdarDell Vostro 3400 Sunil MujumdarToshiba Satellite M645-SP4132L Leonard CamachoAsus U43JC csdaniels1221Samsung RF511 ChuongCLEVO W150HNQ Nix VitaeDell XPS 17 L701x Samuel LealAsus U53JC Sven BettscheiderAsus K52JC beta992Asus U35JC Martin YrjöläAsus X52JC FioxAsus N53SV theshadow124Asus U35J EselSaftAsus P52JC PaszczaDell Vostro 3500 CarlosAcer Aspire 5742G DardanSamsung RF711 Tomasz KarczmarskiAsus U30J Gianni BorghesanAsus U36JC DeeKeyDell Vostro 3700 andresrommierAsus U31JG kedazoAsus X53SV/K53SV rom251Asus P31JG ouafnicoAsus N73JN Sasin91Asus UL30VT AktaSamsung QX310 BenjaminEvensonDell Latitude E6420 Scotchy49 Urządzenia, w których działa automatyczne narządzenia zasilaniem karty Nvidia:Urządzenie Użytkownik (zgłaszający)Alienware M11X R2 Martin JuhlAsus P31JG ouafnico
Statystyki: autor: kmotala — 26 maja 2011, 13:05
Kod:
sudo cp /sciezka/do/pliku/sisimedia_drv.so /usr/lib/xorg/modules/drivers/
Kod:
sudo cp /sciezka/do/pliku/xorg.conf /etc/X11/xorg.conf
Kod:
sudo mc
Kod:
sudo apt-get install mc
Kod:
sudo rm /etc/X11/xorg.conf
Kod:
sudo cp /sciezka/do/pliku/sisimedia_drv.so /usr/lib/xorg/modules/drivers/
Kod:
sudo cp /sciezka/do/pliku/xorg.conf /etc/X11/xorg.conf
Kod:
sudo mc
Kod:
sudo apt-get install mc
Kod:
sudo cp /sciezka/do/pliku/sisctrl /usr/bin/sisctrlsudo cp /sciezka/do/pliku/sisctrl.1.gz /usr/share/man/man1/sisctrl.1.gz
Kod:
sudo rm /etc/X11/xorg.conf
Statystyki: autor: gringoo — 21 mar 2011, 15:30
Kod:
glxinfo | grep OpenGL
Kod:
OpenGL vendor string: Mesa ProjectOpenGL renderer string: Software RasterizerOpenGL version string: 1.4 (2.1 Mesa 7.7.1)OpenGL extensions:
Kod:
uname -a
Kod:
Linux komputer 2.6.38-6-generic #44~lucid1-Ubuntu SMP Tue Jan 25 19:17:25 UTC 2011 x86_64 GNU/Linux
Kod:
sudo dpkg -r xserver-xorg-video-allsudo dpkg -r libdrm-novueau1
Kod:
sudo dpkg -i /sciezka/do/pobranego/libdrm-novueau1a.deb
Kod:
sudo dpkg -i /sciezka/do/pobranego/plymoth.debsudo dpkg -i /sciezka/do/pobranego/libplymoth2.debsudo dpkg -i /sciezka/do/pobranego/libncursesw5.deb
Kod:
glxinfo | grep OpenGL
Kod:
OpenGL vendor string: Mesa ProjectOpenGL renderer string: Software RasterizerOpenGL version string: 1.4 (2.1 Mesa 7.10.1)OpenGL extensions:
Kod:
sudo apt-get install build-essential autoconf libxt-dev libxi-dev libxmu-dev llvm llvm-dev libffi-dev xutils-dev
Kod:
./configuremakesudo make install
Kod:
./configuremake realcleanmake linux-llvm
Kod:
sudo gedit /etc/ld.so.conf
Kod:
’/home/uzytkownik/Pobrane/Mesa/lib/gallium/’include /etc/ld.so.conf.d/*.conf
Kod:
sudo ldconfig
Kod:
glxinfo | grep OpenGL
Kod:
OpenGL vendor string: VMware, Inc.OpenGL renderer string: Gallium 0.4 on llvmpipeOpenGL version string: 2.1 Mesa 7.10.1OpenGL extensions:
Statystyki: autor: makson — 14 mar 2011, 22:08
Kod:
sudo cp /sciezka/do/pliku/sis671_drv.la /usr/lib/xorg/modules/drivers/sudo cp /sciezka/do/pliku/sis671_drv.so /usr/lib/xorg/modules/drivers/
Kod:
sudo /etc/init.d/gdm stop
Kod:
sudo Xorg -configure
Kod:
sudo /etc/init.d/gdm start
Kod:
sudo cp ~/xorg.conf.new /etc/X11/xorg.conf
Kod:
sudo gedit /etc/X11/xorg.conf
Kod:
Driver "sis671"
Kod:
sudo rm /etc/X11/xorg.conf
Statystyki: autor: makson — 04 lis 2010, 10:18
Statystyki: autor: k2cl — 17 paź 2010, 15:13
Statystyki: autor: bulva — 14 wrz 2010, 11:08
Kod:
sudo gedit /etc/modprobe.d/nvidia.conf
Po więcej informacji o poszczególnych opcjach zapraszam do sieci, a także do lektury polecenia: modinfo nvidia.options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1 NVreg_EnableVia4x=1 NVreg_EnableBrightnessControl=1 NVreg_DevicesConnected=1 NVreg_VbiosFromROM=1 NVreg_SoftEDIDs=0 NVreg_VideoMemoryTypeOverride=0 NVreg_NvAGP=3 NVreg_ReqAGPRate=4 NVreg_RegistryDwords="PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerDefaultAC=0x1"
Statystyki: autor: luk1don — 20 sie 2010, 20:52
2. Dokonujemy standardowej aktualizacji systemu:deb http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu lucid main
Kod:
sudo apt-get updatesudo apt-get upgradesudo apt-get dist-upgrade
Kod:
sudo apt-get install libgl1-mesa-dri-gallium
Kod:
sudo apt-get install linux-image-2.6.34-4-generic
Możemy uruchomić glxgears czy inne benchmarki.direct rendering: Yes
server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL version string: 1.2 Mesa 7.9-devel
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: Nouveau
Statystyki: autor: luk1don — 29 maja 2010, 18:34
Kod:
cd ~/Pobrane
Kod:
sudo dpkg -i --force-architecture dcp195clpr-1.1.2-1.i386.deb
Kod:
sudo dpkg -i --force-architecture dcp195ccupswrapper-1.1.2-2.i386.deb
Kod:
sudo gedit /lib/udev/rules.d/40-libsane.rules
Kod:
[# Brother scannersATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes" w znacznikach nie chce pogrubić, ale to o ten wpis chodzi# The following rule will disable USB autosuspend for the deviceENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"LABEL="libsane_rules_end"
Statystyki: autor: sir_lucjan — 16 maja 2010, 16:19
Kod:
sudo gedit /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
Kod:
[Element PCM]switch = mutevolume = mergeoverride-map.1 = alloverride-map.2 = all-left,all-right
Kod:
[Element PCM]switch = mutevolume = ignoreoverride-map.1 = alloverride-map.2 = all-left,all-right
Kod:
sudo gedit /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf
Kod:
[General]priority = 100[Element Hardware Master]switch = mutevolume = mergeoverride-map.1 = alloverride-map.2 = all-left,all-right#[Element Master]#switch = mute#volume = merge#override-map.1 = all#override-map.2 = all-left,all-right[Element Master Mono]switch = offvolume = off; This profile path is intended to control the speaker, not the; headphones. But it should not hurt if we leave the headphone jack; enabled nonetheless.#[Element Headphone]#switch = mute#volume = merge
Kod:
sudo gedit /usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
Kod:
alsamixer
Kod:
pulseaudio -k
Kod:
pulseaudio -D
Statystyki: autor: polbanda1 — 11 mar 2010, 23:52
Kod:
sudo apt-get install libv4l-0
Kod:
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so camorama
Kod:
LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so skypeLD_PRELOAD=/usr/lib/libv4l/v4l2convert.so firefox
Kod:
env LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so skype
Statystyki: autor: Cogito18 — 08 lut 2010, 23:38
Kod:
sudo su
Kod:
odvr [opcje]
Informacje dodatkowe-h Wyświetla pomoc programu (po angielsku)
-v Wyświetla informacje o wersji odvr.
-d [folder] Pobiera pliki z podanego folderu w dyktafonie.
-e Pobiera wszystkie pliki z dyktafonu.
-l Wyświetla informacje o wszystkich plikach znajdujących się w dyktafonie.
-x [folder] Kasuje wszystkie pliki z podanego folderu w dyktafonie.
-c kasuje wszystkie nagrania z dyktafonu.
-y wyłącza zadawanie pytań, używana tylko jako dodatkowa opcja, po właściwej.
-r Resetuje dyktafon (może się przydać przy problemach z obsługą).
-D Enable debug tracing (nie mam pojęcia do czego to służy, więc nie tłumaczę).
Statystyki: autor: w-w — 03 lut 2010, 22:03
Kod:
sudo dpkg -i brscan2-0.2.4-0.i386.deb
Kod:
sudo aptitude install xsane sane sane-utils
Kod:
qbsiu@qbsiu-laptop:~$ lsusb Bus 002 Device 004: ID 04f9:01ce Brother Industries, Ltd DCP-135C
Kod:
qbsiu@qbsiu-laptop:~$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.found USB scanner (vendor=0x04f9, product=0x01ce) at libusb:002:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
Kod:
qbsiu@qbsiu-laptop:~$ scanimage -Ldevice `brother2:bus5;dev1' is a Brother DCP-135C USB scanner
Kod:
sudo gedit /lib/udev/rules.d/50-udev-default.rules
Pod tym wszystkim wystarczy dopisać magiczną linijkę:# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664"
Pogrubione zamieniamy na własne numerki, te numerki znajdziemy w poleceniu lsusbSYSFS{idVendor}=="04f9", SYSFS{idProduct}=="01ce", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
Zapisujemy, dla pewności restartujemy system i już xsane powinien nam śmigać bez roota.Bus 002 Device 004: ID 04f9:01ce Brother Industries, Ltd DCP-135C
Statystyki: autor: qbsiu — 21 wrz 2009, 17:53
Kod:
sudo mv ~/Pulpit/NVIDIA-Linux-x86-96.43.13-pkg1.run /usr/src
Kod:
sudo ln -s /usr/src/NVIDIA-Linux-x86-173.14.05-pkg1.run /usr/src/nvidia-driver
Kod:
sudo sh /usr/src/nvidia-driver
Kod:
gedit update-nvidia
#!/bin/bash
#
# Set this to the exact path of the nvidia driver you plan to use
# It is recommended to use a symlink here so that this script doesn't
# have to be modified when you change driver versions.
DRIVER=/usr/src/nvidia-driver
# Build new driver if it doesn't exist
if [ -e /lib/modules/$1/kernel/drivers/video/nvidia.ko ] ; then
echo "NVIDIA driver already exists for this kernel." >&2
else
echo "Building NVIDIA driver for kernel $1" >&2
sh $DRIVER -K -k $1 -s -n 2>1 > /dev/null
if [ -e /lib/modules/$1/kernel/drivers/video/nvidia.ko ] ; then
echo " SUCCESS: Driver installed for kernel $1" >&2
else
echo " FAILURE: See /var/log/nvidia-installer.log" >&2
fi
fi
exit 0
Kod:
sudo mkdir -p /etc/kernel/postinst.d
Kod:
sudo install update-nvidia /etc/kernel/postinst.d
Statystyki: autor: luk1don — 13 lip 2009, 17:05
Po dodaniu repozytoriów do pliku /etc/apt/sources.list lub poprzez program Źródła oprogramowania należy zainstalować moduły do programu Hardware drivers (Sterowniki) poleceniem:# Nvidia 185.xx 190.xx
deb http://ppa.launchpad.net/brandonsnider/ppa/ubuntu jaunty main
deb-src http://ppa.launchpad.net/brandonsnider/ppa/ubuntu jaunty main
Kod:
sudo apt-get install nvidia-185-modaliases nvidia-190-modaliases
Statystyki: autor: Watras15 — 10 lip 2009, 00:18
Kod:
sudo apt-get remove xserver-xorg-video-mga
Kod:
sudo apt-get install gcc g++ binutils make coreutils pkg-config xserver-xorg-dev x11proto-core-dev libxau-dev x11proto-fonts-dev x11proto-input-dev x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev libdrm-dev x11proto-xf86dri-dev x11proto-gl-dev mesa-common-dev libtool xutils-dev libgl1-mesa-dri
Kod:
wget http://www.tuxx-home.at/projects/mga/mga_xorg7_installer.run
Kod:
chmod +x mga_xorg7_installer.run
Kod:
sudo sh mga_xorg7_installer.run
Kod:
sudo gedit /etc/X11/xorg.conf
Kod:
Section "Monitor"Option "ReducedBlanking"EndSectionSection "Device"Option "NoDDC"EndSection
Kod:
Section "Module" Load "glx" # GL module Load "dri" # Direct Rendering moduleEndSectionSection "Monitor"Identifier"Configured Monitor"Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +VsyncOption "DPMS"Option "ReducedBlanking"Option "noDDCvbe"EndSectionSection "Screen"Identifier"Default Screen"Monitor"Configured Monitor"Device"Configured Video Device"DefaultDepth 24 DefaultFbBPP 32Option "PreferredMode" "1280x1024" SubSection "Display" Depth 24Modes "1280x1024_75.00" EndSubSectionEndSectionSection "Device"Identifier"Configured Video Device"Option "NoDDC"VideoRam 32768EndSectionSection "DRI" Mode 0666EndSectionSection "ServerFlags"Option"DontZap""False"EndSection
Kod:
gtf 1280 1024 75
Kod:
# gtf 1280 1024 75# 1280x1024 @ 75.00 Hz (GTF) hsync: 80.17 kHz; pclk: 138.54 MHz Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
Kod:
xrandr --newmode "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
Kod:
xrandr --output DVI --mode 1280x1024_75.00
Kod:
xrandr --output VGA --mode 1280x1024_75.00
Kod:
Section "ServerFlags" Option "AIGLX" "off" Option "true" Option "IgnoreABI" "True"EndSectionSection "Files"RgbPath "/usr/share/X11/rgb"ModulePath "/usr/lib/xorg/modules"FontPath "/usr/share/fonts/TTF"FontPath "/usr/share/fonts/OTF"FontPath "/usr/share/fonts/Type1"FontPath "/usr/share/fonts/misc"FontPath "/usr/share/fonts/75dpi:unscaled"EndSectionSection "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe"EndSectionSection "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" Option "XkbVariant" "nodeadkeys" Option "XkbOptions" "lv3:ralt_switch_multikey"EndSectionSection "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true"EndSectionSection "Monitor" Identifier "Display 1" VendorName "LG" ModelName "NN" Option "DPMS"EndSectionSection "Monitor" Identifier "Display 2" VendorName "IIYAMA" ModelName "NN" Option "DPMS"EndSectionSection "Device" Option "AGPMode" "4" Identifier "MATROX CARD 1" Driver "mga" Screen 0 VendorName "Matrox" BusID "PCI:2:0:0"EndSectionSection "Device" Option "AGPMode" "4" Identifier "MATROX CARD 2" Driver "mga" Screen 1 VendorName "Matrox" BusID "PCI:2:0:0"EndSectionSection "Screen" Identifier "Screen 1" Device "MATROX CARD 1" Monitor "Display 1" DefaultDepth 24 DefaultFbBPP 32 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubSectionEndSectionSection "Screen" Identifier "Screen 2" Device "MATROX CARD 2" Monitor "Display 2" DefaultDepth 24 DefaultFbBPP 32 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubSectionEndSectionSection "Extensions" Option "Composite" "on" EndSectionSection "ServerLayout" Identifier "Matrox PowerDesk configured." Screen "Screen 1" Screen "Screen 2" LeftOf "Screen 1" Option "Clone" "Off" InputDevice "Generic Keyboard" InputDevice "Configured Mouse"EndSectionSection "DRI" Mode 0666EndSection
Statystyki: autor: amiro — 23 cze 2009, 21:45
Kod:
sudo apt-get install nvidia-settings
Kod:
sudo gedit /usr/bin/powermizer-off
Kod:
#!/bin/bashwhile true; do nvidia-settings -q all > /dev/null; sleep 20;done
Kod:
chmod 755 /usr/bin/powermizer-off
Statystyki: autor: ORMO_PL — 08 cze 2009, 20:05
Kod:
RADEON_TCL_FALLBACK_TCL_DISABLE, 1);} elsectx->VertexProgram._MaintainTnlProgram = GL_TRUE; return GL_TRUE; }
Kod:
sudo mv /usr/lib/dri/r300_dri.so /usr/lib/dri/r300_dri.so.baksudo cp lib/r300_dri.so /usr/lib/dri/r300_dri.so
Statystyki: autor: Farcoral — 25 kwie 2009, 13:23
Kod:
svn co https://m560x-driver.svn.sourceforge.net/svnroot/m560x-driver m560x-driver
Kod:
sudo apt-get install subversion
Kod:
sudo make
Kod:
make load
Kod:
LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so mplayer tv:// -tv driver=v4l2:device=/dev/video0:brightness=50:gain=0 -fps 30
Kod:
LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so skype
Kod:
sudo make install
Statystyki: autor: anthrax — 26 sty 2009, 01:28
Kod:
cd ~/Desktoptar -xvzf XFiDrv_Linux_Public_US_1.00.tar.gzcd XFiDrv_Linux_Public_US_1.00sudo makesudo make installsudo modprobe ctxfi
Statystyki: autor: Darkiii — 06 lis 2008, 21:35
Kod:
sudo cat /proc/asound/modules
Kod:
0 snd_emu10k1 1 snd_intel8x0 2 snd_usb_audio
Kod:
sudo cat /proc/asound/pcm
Kod:
00-03: emu10k1 : Multichannel Playback : playback 100-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 100-01: emu10k1 mic : Mic Capture : capture 100-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 102-00: USB Audio : USB Audio : capture 101-02: Intel ICH - IEC958 : NVidia nForce2 - IEC958 : playback 101-01: Intel ICH - MIC ADC : NVidia nForce2 - MIC ADC : capture 101-00: Intel ICH : NVidia nForce2 : playback 1 : capture 1
Kod:
sudo gedit /etc/modprobe.d/alsa-base
Kod:
options snd-intel8x0 index=0options snd-emu10k1 index=1
Statystyki: autor: pboguslaw — 06 wrz 2008, 15:03
Kod:
Menu aplikacje->Akcesoria->Terminal
Kod:
cd; mkdir maya44; cd maya44wget http://prl-quakewars.ovh.org/maya44patch-alsa-driver-1.0.17.diff.tar.gzwget ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Kod:
tar -xjf alsa-driver-1.0.17.tar.bz2tar -xvzf maya44patch-alsa-driver-1.0.17.diff.tar.gz
Kod:
patch -p0 < maya44patch-alsa-driver-1.0.17.diff
Kod:
sudo apt-get install build-essential
Kod:
cd alsa-driver-1.0.17./configure --with-cards=ice1724 --with-sequencer=yes ; make
Kod:
sudo rm -r /lib/modules/`uname -r`/ubuntu/sound/*sudo make install
Kod:
cd; mkdir maya44; cd maya44wget ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.18rc3.tar.bz2wget http://prl-quakewars.ovh.org/esi_maya44-alsa-1.0.18rc3.diff.tar.gztar -xjf alsa-driver-1.0.18rc3.tar.bz2tar -xvzf esi_maya44-alsa-1.0.18rc3.diff.tar.gzpatch -p0 < esi_maya44-alsa-1.0.18rc3.diffsudo apt-get install build-essentialcd alsa-driver-1.0.18rc3./configure --with-cards=ice1724 --with-sequencer=yes ; makesudo make install
Statystyki: autor: xselthor — 20 lip 2008, 17:42
Kod:
~/bin/ffmpeg -i <film.avi> -f amv -s <szerokosc>x<wysokosc> -r 16 -ac 1 -ar 22050 -qmin 3 -qmax 3 <film.amv>
Statystyki: autor: frytek — 20 maja 2008, 18:02
Kod:
sudo nano /etc/init.d/klawiatura
Kod:
#symbol eurosetkeycodes e033 200#symbol dolarasetkeycodes e034 201#przycisk kluczasetkeycodes e06e 202#przycisk prezentacjisetkeycodes e075 203#przycisk strzałeksetkeycodes e079 204
Kod:
sudo chmod +x /etc/init.d/klawiatura
Kod:
sudo update-rc.d klawiatura defaults 90
Kod:
sudo /etc/init.d/klawiatura
Kod:
sudo aptitude install xbindkeys
Kod:
xbindkeys -k
Kod:
"(Scheme function)" m:0x0 + c:36 Return
Kod:
nano ~/.xbindkeysrc
Kod:
"amixer set Master 1dB-" #zmniejszenie głośności m:0x0 + c:168 #kod klawisza euro"amixer set Master 1dB+" #zwiększenie głośności m:0x0 + c:169 #kod klawisza dolara"dcop kicker kicker toggleShowDesktop " #pokaż pulpit m:0x0 + c:172 #przycisk prezentacji"eject" #wysunięcie CD-rom m:0x0 + c:173 #przycisk strzałek"kadu %u" # kadu m:0x0 + c:151 # przycis "P""amarok" m:0X0 + c:171 # kod przyciku klucza.
Statystyki: autor: apito — 18 maja 2008, 00:12
Kod:
sudo dpkg -i mfc210clpr-1.0.2-1.i386.deb
Kod:
sudo dpkg -i cupswrappermfc210c_1.0.0-1_i386.deb
Kod:
sudo dpkg -i brscan2-0.0.1-0.i386.deb
Kod:
sudo gedit /etc/fstab
Kod:
none /proc/bus/usb usbfs auto,devmode=0666 0 0
Kod:
sudo umount /proc/bus/usbsudo mount /proc/bus/usbsudo mknod -m 666 /dev/usbscanner c 180 48
Statystyki: autor: Flops — 05 maja 2008, 19:21
Kod:
sudo gedit /usr/bin/update-alsa
Kod:
sudo kate /usr/bin/update-alsa
Kod:
#!/bin/bashfunction quest{echo " "echo " "echo "Jakiego środowiska graficznego?"echo "Jeśli GNOME kliknij 1"echo "Jeśli KDE kliknij 2"echo "Jeśli KDE4 kliknij 3"echo "Inne kliknij 4"read -n 1 grafcase "$graf" in "1") echo "" ; echo "Czyli używasz GNOME. Instaluję mixer..." ; sudo apt-get install gnome-alsamixer ;; "2") echo "" ; echo "Czyli używasz KDE. Instaluję mixer..." ; sudo apt-get install kmix ;; "3") echo "" ; echo "Czyli używasz KDE4. Instaluję mixer..." ; sudo apt-get install kmix-kde4 ;; "4") echo "" ; echo "Przechodzę do dalszych zadań..." ;; *) echo "" ; echo "Podałeś złą cyfrę!" ; questesac}function instalacja{sudo apt-get install tar wget build-essential linux-headers-`uname -r` libncurses5-dev gettext gcc libgcc1sudo /etc/init.d/alsasound stopcd ~/alsa# driverif [ -e $d ]; then rm -Rf $d sudo rm -Rf alsa-driver-$w wget -c ftp://ftp.alsa-project.org/pub/driver/$d $r $delse wget -c ftp://ftp.alsa-project.org/pub/driver/$d $r $dfi# libif [ -e $l ]; then rm -Rf $l sudo rm -Rf alsa-lib-$w wget -c ftp://ftp.alsa-project.org/pub/lib/$l $r $lelse wget -c ftp://ftp.alsa-project.org/pub/lib/$l $r $lfi# utilsif [ -e $u ]; then rm -Rf $u sudo rm -Rf alsa-utils-$w wget -c ftp://ftp.alsa-project.org/pub/utils/$u $r $uelse wget -c ftp://ftp.alsa-project.org/pub/utils/$u $r $ufiif [ -d ~/alsa/alsa-driver-$w ]; thencd ~/alsa/alsa-driver-$w./configuremakesudo make installsudo ./snddeviceselse echo $k echo "$e2 alsa-driver-$w. $e" echo $k sleep 10fiif [ -d ~/alsa/alsa-lib-$w ]; thencd ~/alsa/alsa-lib-$w./configuremakesudo make installelse echo $k echo "$e2 alsa-lib-$w. $e" echo $k sleep 10fiif [ -d ~/alsa/alsa-utils-$w ]; thencd ~/alsa/alsa-utils-$w./configuremakesudo make installelse echo $k echo "$e2 alsa-lib-$w. $e" echo $k sleep 10fisudo cp -v /lib/modules/`uname -r`/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/`uname -r`/ubuntu/media/snd-hda-intel/snd-hda-intel.kosudo cp -v ~/alsa/alsa-driver-$w/modules/* /lib/modules/`uname -r`/kernel/sound/sudo alsaconfsudo depmod -asudo /etc/init.d/alsasound startquestecho " "echo " "echo "Gratulacje! Alsa została zaaktualizowana do wersji $w. Proszę nie usuwać katalogu $HOME/alsa !!! Jeśli nie będziesz miał dźwięku lub będzie zbyt cicho to pobaw się suwakami w jakimś mixerze systemowym."echo " "echo " "}echo "Update Alsa by Ari"sleep 2s="http://alsa-project.org w tabeli Current Version"r="tar -xjf"k="..................."e="Być może wystąpił błąd przy pobieraniu lub źle podałeś wersję! Sprawdź dokładnie na stronie $s. Jeśli jest to wersja stabilna np. 1.0.16 to wpisz 1.0.16, a jeżeli jest to wersja rc np. 1.0.16rc3 to wpisz 1.0.16rc3"e2="Nie odnalazłem któregoś z plików!"i="Instaluję źródla Alsy do $HOME/alsa"echo "Witaj $USER. Podaj najnowszą wersję Alsy przykładowo 1.0.16. Możesz ją sprawdzić na stronie $s"read wd="alsa-driver-$w.tar.bz2"l="alsa-lib-$w.tar.bz2"u="alsa-utils-$w.tar.bz2"echo "Aktualizuję Alsę do wersji $w."echo "Gdy pojawi się niebieskie okno konfiguracji, kliknij [ENTER] < OK >, następnie wybierz swoją kartę dźwiękową i wciśnij [ENTER] < OK >, potem znowu [ENTER] < TAK > , [ENTER] < OK >, [ENTER] < TAK >."sleep 15if [ -d ~/alsa ]; then echo $i sleep 2 instalacjaelse mkdir ~/alsa echo $i sleep 2 instalacjafi
Kod:
sudo chmod +x /usr/bin/update-alsa
Kod:
update-alsa
Statystyki: autor: Ari — 24 mar 2008, 17:16
to wyświetli się komunikat w stylu :sudo cat /proc/asound/cards
###### 2. Rekonfiguracja0 [rev50]: VIA686A - VIA 82C686A/B rev50
VIA 82C686A/B rev50 with ICE1232 at 0xdc00, irq 12
1 [CMI8738MC6]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xec00, irq 10
i doklejamy na końcu 2 następujące linie:sudo gedit /etc/modprobe.d/alsa-base
###### 3. Adnotacje (WAŻNE)options snd-cmi8738 index=0
options snd-via82xx index=1
więc googlać nie trzeba było, tylko wkleiłem te pogrubione 5-cio znakowe kody1 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at irq 22
0 [Live ]: EMU10K1 - SB Live 5.1 [SB0220]
SB Live 5.1 [SB0220] (rev.10, serial:0x100a1102) at 0x9000, irq 16
Statystyki: autor: E-2rT — 23 mar 2008, 02:43
Kod:
sudo dpkg -i envy_0.9.10-0ubuntu7_all.deb
Kod:
sudo apt-get install -f
Kod:
sudo envy -t
Kod:
sudo apt-get purge envy
Kod:
sudo apt-get autoremove
Statystyki: autor: sirmacik — 14 mar 2008, 08:30
Statystyki: autor: pawelf2007 — 19 lut 2008, 15:20
Kod:
tar xvfz r5u870-0.10.1.tar.gz
Kod:
cd r5u870
Kod:
sudo make
Kod:
sudo make install
Kod:
sudo modprobe r5u870
Kod:
sudo gedit /etc/modules
Kod:
sudo gedit /etc/modprobe.d/alsa-base
Statystyki: autor: chwesiu — 18 lut 2008, 02:14
Kod:
DEVICE=""
Kod:
DEVICE="hys=pci-0000:00:0c.0/ir0"
Kod:
I: Bus=0001 Vendor=107d Product=6611 Version=0001N: Name="cx88 IR (Leadtek Winfast 2000XP"P: Phys=pci-0000:00:0c.0/ir0H: Handlers=kbd event2B: EV=100003B: KEY=48fc204 1d0040 0 0 0 0 2000000 90 40004003 1e0001 fff80 0 100000
Statystyki: autor: grymberg — 14 lut 2008, 13:15
Kod:
sudo apt-get install build-essential linux-headers-`uname -r` libncurses5-dev gettext xmlto
Kod:
cd ~/alsa/alsa-driver-1.0.22./configuremakesudo make installcd ..cd alsa-lib-1.0.22./configuremakesudo make installcd ..cd alsa-utils-1.0.22./configuremakesudo make install
Kod:
checking form.h presence... yeschecking for form.h... yeschecking for new_panel in -lpanelw... noconfigure: error: panelw library not found
Kod:
sudo ln -s libpanelw.so.5 /usr/lib/libpanelw.sosudo ln -s libformw.so.5 /usr/lib/libformw.sosudo ln -s libmenuw.so.5 /usr/lib/libmenuw.sosudo ln -s libncursesw.so.5 /lib/libncursesw.so
Kod:
sudo apt-get install libncursesw5-dev
Kod:
./configuremakesudo make install
Kod:
sudo alsaconf
Kod:
sudo depmod -a
Kod:
sudo /etc/init.d/alsasound restart
Kod:
cat /proc/asound/version
Ja nie pisałem, żeby robić WSZYSTKO jako root.Wpisałem linię pierwszą , potem drugą "./configure" i tu zaczęły się problemy (permision denied). Nie wiem czy coś żłe zrobiłem, chodzi o same zasady wpisywania kodów ? Linia po linii ,każda dopiero po wykonaniu bieżącego kodu ?
Całość instalacji nowej ALSA zaczęłem z root wg. Twoich wskazówek , ale kompilację już z konta użytkownika. Czy dobrze postępuję? Proszę o odpowiedż !
Pozdrawiam
Marek
Statystyki: autor: spitf1r3 — 31 sty 2008, 19:25
Kod:
cd ~ && wget http://www.rastageeks.org/downloads/ov51x-jpeg/old-releases/ov51x-jpeg-1.5.4.tar.gz
Kod:
cd /opt/ && sudo tar xvzf ~/ov51x-jpeg-1.5.4.tar.gz
Kod:
sudo nano /opt/ov51x-jpeg-1.5.4/ov51x-jpeg-core.c
Kod:
static int force_palette;
Kod:
static int force_palette = 13;
Kod:
cd /opt/ov51x-jpeg-1.5.4/ && sudo make && sudo make install
Kod:
sudo depmod -a
Kod:
sudo modprobe -l |grep ov51x
Kod:
sudo modprobe videodevsudo modprobe i2c-coresudo modprobe ov51x-jpeg
Kod:
gksudo gedit /etc/modules
Kod:
videodevi2c-coreov51x-jpeg
Statystyki: autor: Mazimen — 30 sty 2008, 21:38
Następnie - sprawdzamy - co potrafi nasza karta graficzna i monitor - instrukcje obsługi i strony internetowe producentów.~$ sudo dpkg -l | grep nvidia
ii nvidia-glx-new 100.14.19+2.6.22.4-14.10 NVIDIA binary XFree86 4.x/X.Org 'new' driver
ii nvidia-kernel-common 20051028+1ubuntu7 NVIDIA binary kernel module common files
Otwieramy do edycji plik xorg.conf (ostożnie - radzę najpierw zrobić kopię pliku)~$ gtf 1152 864 130
# 1152x864 @ 130.00 Hz (GTF) hsync: 121.16 kHz; pclk: 191.92 MHz
Modeline "1152x864_130.00" 191.92 1152 1240 1368 1584 864 865 868 932 -HSync +Vsync
Uzyskany wynik polecenia gtf wklejamy do pliku xorg.conf - do sekcji Monitor:sudo gedit /etc/X11/xorg.conf
Każdy wpis rozpoczęty wyrażeniem ModeLine jest wynikiem pojedynczej komendy gtf.Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC FP1355"
HorizSync 30.0 - 121.0
VertRefresh 50.0 - 160.0
ModeLine "1152x864_100.00" 143.0 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1152x864_110.00" 160.0 1152 1240 1368 1584 864 865 868 921 -hsync +vsync
ModeLine "1152x864_120.00" 176.0 1152 1240 1368 1584 864 865 868 926 -hsync +vsync
ModeLine "1152x864_130.00" 191.0 1152 1240 1368 1584 864 865 868 932 -hsync +vsync
ModeLine "1280x1024_100.00" 190.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1280x1024_110.00" 211.0 1280 1376 1520 1760 1024 1025 1028 1091 -hsync +vsync
ModeLine "1600x1200_96.00" 268.0 1600 1728 1904 2208 1200 1201 1204 1268 -hsync +vsync
EndSection
Section "Device"
Identifier "nVidia Corporation G80 [GeForce 8600 GT]"
Driver "nvidia"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G80 [GeForce 8600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
EndSection
Statystyki: autor: jacekalex — 22 sty 2008, 06:17
Kod:
tar -xvf ov51x-jpeg-1.5.4.tar.gz
Kod:
cd ov51x-jpeg-1.5.4/
Kod:
make
Kod:
sudo make install
Kod:
sudo depmod -A
Kod:
sudo modprobe ov51x-jpeg
Statystyki: autor: Bies — 02 sty 2008, 17:34
Kod:
lsusb
Kod:
Bus 001 Device 002: ID 041e:4052 Creative Technology, Ltd
Kod:
wget http://www.rastageeks.org/downloads/ov51x-jpeg/old-releases/ov51x-jpeg-1.5.3.tar.gz
Kod:
tar xzvf ov51x-jpeg-1.5.3.tar.gz
Kod:
cd ov51x-jpeg-1.5.3
Kod:
make
Kod:
sudo make install
Kod:
sudo depmod
Kod:
sudo modprobe ov51x-jpeg
Kod:
mplayer tv:// -tv driver=v4l:width=640:height=480:device=/dev/video0
Kod:
wget http://web.tiscali.it/lele85_home/ov51x-jpeg-1.5.3~skype_patch.tar.gz
Kod:
tar xzvf ov51x-jpeg-1.5.3~skype_patch.tar.gz
Kod:
cd ov51x-jpeg-1.5.3~skype_patch
Kod:
patch -p1 < ov51x_jpeg_core.noblock.patch.txt
Kod:
patch -p0 < ov51x_jpeg_core.noblock.patch.txt
Kod:
make clean
Kod:
make
Kod:
sudo make install
Kod:
sudo depmod
Kod:
sudo rmmod ov51x-jpeg
Kod:
sudo modprobe ov51x-jpeg forceblock=1
Kod:
options ov51x-jpeg forceblock=1
Kod:
sudo gedit /etc/modprobe.d/options
Kod:
sudo gedit /etc/modprobe.conf
Kod:
mplayer tv:// -tv driver=v4l:width=640:height=480:device=/dev/video0
Statystyki: autor: GregG — 27 gru 2007, 20:55
Kod:
gksudo gedit /etc/X11/xorg.conf
Kod:
kdesu kate /etc/X11/xorg.conf
Kod:
Section "InputDevice"Identifier"Configured Mouse"Driver"mouse"Option"CorePointer"Option"Device""/dev/input/mice"Option"Protocol""ImPS/2"Option"ZAxisMapping""4 5"Option"Emulate3Buttons""true"EndSection
Kod:
Section "InputDevice"Identifier"Configured Mouse"Driver"mouse"Option"CorePointer"Option"Device""/dev/input/mice"Option"Protocol""auto"Option"ZAxisMapping""4 5"Option"Emulate3Buttons""true"EndSection
Kod:
sudo apt-get install build-essential libgtk2.0-0 libgtk2.0-dev libglade2-0 libglade2-dev pkg-config
Kod:
wget http://www.ollisalonen.com/btnx/btnx-0.4.4.tar.gztar -xvvf btnx-0.4.4.tar.gzcd btnx-0.4.4makesudo make install
Kod:
wget http://www.ollisalonen.com/btnx/btnx-config-0.4.4.tar.gztar -xvvf btnx-config-0.4.4.tar.gzcd btnx-config-0.4.4./configure
Kod:
./configure builddocs=no
Kod:
makesudo make install
Kod:
$ sudo make uninstall
Kod:
kate /home/nazwa_użytkownika/.kde/Autostart/btnx.sh
Kod:
#!/bin/bash/usr/sbin/btnx -b -c LogitechVXNANO
Kod:
chmod +x /home/nazwa_użytkownika/.kde/Autostart/btnx.sh
Statystyki: autor: yacup — 18 gru 2007, 10:23
Kod:
sudo apt-get install build-essential linux-headers-`uname -r` camorama subversion
Kod:
cd ~
Kod:
svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver
Kod:
cd syntekdriver/trunk/driver
Kod:
make -f Makefile.standalone cleanmake -f Makefile.standalone
Kod:
sudo modprobe videodevsudo modprobe v4l1-compatsudo insmod stk11xx.ko fps=30
Kod:
sudo gedit /etc/modules
Kod:
videodevv4l1-compat
Kod:
insmod /home/twój_login/syntekdriver/trunk/driver/stk11xx.ko fps=30
Statystyki: autor: zyxell — 31 lip 2007, 22:50
Kod:
wget http://www.ece.auckland.ac.nz/~wsun013/tvout/files/xf86-video-ati-git-20061029.tgz
Kod:
tar zxvf xf86-video-ati-git-20061029.tgz
Kod:
cd xf86-video-ati-git-20061029export XORG_PREFIX="/usr" export XORG_CONFIG="--prefix=$XORG_PREFIX --sysconfdir=/etc --localstatedir=/var"./configure $XORG_CONFIG --with-xorg-module-dir=/usr/lib/xorg/modules
Kod:
make install## Jako ze instaluje sie to do zlego miejsca musimy przekopiowac sterowniki w odpowiednie miejsce.# Z /usr/lib/X11/modules/ --> /usr/lib/xorg/modules/# Sugeruje aby robic to z konsoli bez wlaczonych x'ow ;P [zwis]#
Kod:
Section "Device" Identifier "ATI Technologies, Inc. Radeon R200 QM [Radeon 9100]" Driver "ati" BusID "PCI:1:0:0" Option "MonitorLayout" "CRT, STV" # Moj Radeon 9100 jest pokopany i ma TV jako primary wiec zamieniamy kolejnosc STV, CRT Option "TVOutput" "PAL"EndSection
Kod:
Section "Monitor" Identifier "S/T 51S" Option "DPMS" HorizSync 30 - 50 VertRefresh 60 - 60EndSectionSubSection "Display" Depth 24 Modes "800x600" # TV-OUT działa jedynie w tej rozdzielczości! EndSubSection
Kod:
SubSection "Display" Depth 24 Modes "1024x768" "800x600"EndSubSection
Kod:
#!/bin/bashTEST=`xrandr|grep "\*"|cut -c 2`if [ $TEST -eq "0" ] ; then xrandr -s 1else xrandr -s 0fi
Statystyki: autor: t1mb3rw0lf — 19 cze 2007, 11:36
Kod:
dmesg | grep card
Kod:
49.114964] CORE cx88 [0] : subsystem: 1461:001b,board : UNKNOW/GENERIC [card=0,autodetected]
Kod:
bttv0 : using: AVerMedia TVCapture 98[card=13, autodetected]
Kod:
sudo rmmod tuner
Kod:
sudo rmmod bttv
Kod:
sudo rmood cx8800
Kod:
sudo rmmod cx88xx
Kod:
sudo rmmod saa7134 alsa
Kod:
sudo rmmod saa7134
Kod:
sudo modprobe videodev
Kod:
sudo modprobe bttv card=17
Kod:
sudo modprobe cx88xx card=6
Kod:
sudo modprobe cx8800
Kod:
sudo modprobe saa7134 card=57
Kod:
card
Kod:
dmesg
Kod:
CORE cx88[0] : subsystem: 1461:001b, board:AverTV Studio 303 (M126) [card=6,insmod option]
Kod:
tuner 1-0060: type set to 38(Philips PAL/SECAM multi (FM1216ME) )
Kod:
tuner=n
Statystyki: autor: phyrz — 18 cze 2007, 12:32
Kod:
gedit ~/.asoundrc
Kod:
pcm.!default {type plugslave.pcm surround51slave.channels 6slave.rate 48000ttable.0.0 1ttable.1.1 1ttable.0.2 1ttable.1.3 1ttable.0.4 0.5ttable.1.4 0.5ttable.0.5 0.5ttable.1.5 0.5}
Kod:
Główny / MainMaster MonoPCMSurroundSurround Jack ModeCenterLFECDIEC958IEC958 PrzechwytywanieIEC958 Playback AC97-SPSAIEC958 Playback SourceChannel ModeDuplicate FrontExternal Amplifier
Kod:
speaker-test -b 8192 -Dplug:surround51 -c6
Statystyki: autor: SoofMan — 07 cze 2007, 15:19
Kod:
sudo apt-get install atitvout
Kod:
sudo gedit /etc/X11/xorg.conf
i dodajemy wpisy:Section "Device"
Identifier"ATI Technologies Inc RV350 AS [Radeon 9550]"
Driver"fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Busid"PCI:1:0:0"
EndSection
Tak aby wyglądało to tak jak poniżej:Option "NoTV" "no"
Option "TVStandard" "PAL-D"
Option "ConnectedMonitor" "CRT,tv"
Option "EnableMonitor" "crt1,tv"
Option "TVFormat" "PAL-D"
Option "TVOutFormat" "Composite"
Option "ForceMonitors" "crt1,tv"
Oczywiście sekcja "Identifier" będzie dla każdej karty inna (no chyba że macie taką sama kartę jak moja:))Section "Device"
Identifier"ATI Technologies Inc RV350 AS [Radeon 9550]"
Driver"fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "NoTV" "no"
Option "TVStandard" "PAL-D"
Option "ConnectedMonitor" "CRT,tv"
Option "EnableMonitor" "crt1,tv"
Option "TVFormat" "PAL-D"
Option "TVOutFormat" "Composite"
Option "ForceMonitors" "crt1,tv"
Busid"PCI:1:0:0"
EndSection
Statystyki: autor: patrykga — 06 maja 2007, 22:35
Kod:
sudo apt-get install svn-buildpackage
Kod:
sudo svn co svn://rastageeks.org/svn/ov51x-jpeg/trunk
Kod:
cd trunk
Kod:
sudo svn update
Kod:
make
Kod:
sudo depmod -a
Kod:
sudo apt-get install camstream
Statystyki: autor: tyberian — 06 maja 2007, 13:30
Kod:
rm -rf ~/.gconf/desktop/gnome/volume_manager
Statystyki: autor: Magnes — 06 maja 2007, 08:53
Kod:
sudo apt-get install restricted-manager
Kod:
sudo restricted-manager
Statystyki: autor: kwalo — 01 maja 2007, 02:34
I drugi i810switchi855 TV Out switching
i855-crt is a small utility to enable or disable the TV Out function of
many i855-based laptops.
Enables/disables video output to CRT/LCD on i810 video hardware
i810switch enables/disables the output to the CRT display and LCD,
depending on the i810 graphics controller hardware. Such hardware is found
on some laptops (eg, Sony Vaios, some Dell models, etc). Chipsets also
supported include i855, i830, i845.
This package includes the i810rotate script, which toggles the output
between three states: LCD only, LCD + CRT, and CRT only.
Statystyki: autor: sylwester — 13 mar 2007, 18:35
Kod:
Section "Device"Identifier "SVIDEO"Driver "i810"Option "MonitorLayout""TV,LFP"Option "FlipPrimary" "True"Option "TVStandard""NTSC"Option "TVOutFormat""SVIDEO"Option "ConnectedMonitor""TV"Option "Clone" "True"BusID "PCI:0:2:0"EndSectionSection "Monitor"Identifier"LCD"Option"DPMS"HorizSync30 - 81VertRefresh56 - 76EndSectionSection "Monitor"Identifier"TV"HorizSync30-50VertRefresh60EndSectionSection "Screen"Identifier"TV"Device"SVIDEO"Monitor"TV"DefaultDepth24SubSection "Display"Depth24Modes"800x600" "640x480"EndSubSectionEndSectionSection "ServerLayout"Identifier"LCDandTV"Screen"TV"InputDevice"Generic Keyboard"InputDevice"Configured Mouse"InputDevice"Synaptics Touchpad"EndSectionSection "ServerFlags"Option"DefaultServerLayout" "LCDandTV"EndSection
Kod:
Section "Device"Identifier"Intel Corporation 82852/855GM Integrated Graphics Device"Driver"i810"BusID"PCI:0:2:0"EndSectionSection "Monitor"Identifier"Generic Monitor"Option"DPMS"HorizSync28-51VertRefresh43-60EndSectionSection "Screen"Identifier"Default Screen"Device"Intel Corporation 82852/855GM Integrated Graphics Device"Monitor"Generic Monitor"DefaultDepth24SubSection "Display"Depth1Modes"1024x768"EndSubSectionSubSection "Display"Depth4Modes"1024x768"EndSubSectionSubSection "Display"Depth8Modes"1024x768"EndSubSectionSubSection "Display"Depth15Modes"1024x768"EndSubSectionSubSection "Display"Depth16Modes"1024x768"EndSubSectionSubSection "Display"Depth24Modes"1024x768"EndSubSectionEndSectionSection "ServerLayout"Identifier"Default Layout"Screen"Default Screen"InputDevice"Generic Keyboard"InputDevice"Configured Mouse"InputDevice "stylus" "SendCoreEvents"InputDevice "cursor" "SendCoreEvents"InputDevice "eraser" "SendCoreEvents"InputDevice"Synaptics Touchpad"EndSectionSection "DRI"Mode0666EndSection
Kod:
#!/bin/shsudo cp /etc/X11/xorg.conf.svideo /etc/X11/xorg.confsudo pkill Xorg
Kod:
#!/bin/shsudo cp /etc/X11/xorg.conf.single /etc/X11/xorg.confsudo pkill Xorg
Statystyki: autor: royb — 13 mar 2007, 13:34
Kod:
sudo gedit /etc/modprobe.d/alsa-base
Zapisujemy, restartujemy system...i cieszymy się dźwiękiemoptions snd-hda-intel position_fix=1 model=3stack
Statystyki: autor: Fenriz — 09 mar 2007, 20:32
Kod:
grep ati /etc/X11/xorg.conf
Kod:
Driver "ati"
Kod:
glxinfo | grep direct
Kod:
direct rendering: Yes
Kod:
sudo dpkg -i envy_0.8.2-0ubuntu1_all.deb
Kod:
sudo /etc/init.d/gdm stop
Kod:
sudo envy
Kod:
sudo /etc/init.d/gdm start
Kod:
glxinfo | grep direct
Kod:
direct rendering: Yes
Kod:
sudo aptitude purge envy
Statystyki: autor: kwalo — 03 lut 2007, 20:36
Kod:
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Kod:
sudo cp /etc/X11/xorg.conf_backup /etc/X11/xorg.conf
Kod:
sudo gedit /etc/X11/xorg.conf
Kod:
sudo kwrite /etc/X11/xorg.conf
Kod:
sudo nano /etc/X11/xorg.conf
Kod:
Section "Monitor" Identifier "Generic Monitor" Option "DPMS"EndSection
Kod:
Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 31.0 - 81.0 VertRefresh 56.0 - 75.0EndSection
Kod:
Ctrl+Alt+Backspace
Statystyki: autor: acidburnpl — 19 sty 2007, 13:38
Kod:
sudo nano /etc/X11/xorg.conf
Kod:
Section "Device" Identifier "Generic Video Device" Driver "nv" BusID "PCI:0:5:0"EndSectionSection "Monitor" Identifier "B1925S1W" HorizSync 31-83 VertRefresh 56-75 Option "DPMS" DisplaySize 410 257 EndSectionSection "Screen" Identifier "Default Screen" Device "Generic Video Device" Monitor "B1925S1W" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1440x900" EndSubSectionEndSection
Kod:
man xorgman xorg.conf
Kod:
Section "Screen" Identifier "Default Screen" Device "Generic Video Device" Monitor "B1925S1W" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1440x900" "640x480" "800x600" "1024x768" "1152x864" "1280x1024" EndSubSectionEndSection
Statystyki: autor: csz — 01 sty 2007, 16:12