Mint 17 - Powolne pierwsze uruchamianie systemu.

[folkstorm]

Witam

Potrzebuję pomocy, przez ostatnie miesiące testowałem różne dystrubucję xubuntu,ubuntu,kubuntu obecnie najnowszy mint i prędzej czy później pojawia się ten sam problem boot straszliwie zwalnia, pierwsze uruchomienie zazwyczaj poranne trwa niemiłosiernie długo, drugie jest normalne.Wydaje mi się że problem leży po stronie ureadahead także usunąłem wszelkie programy z start upu jednak problem dalej wraca, skorzystałem z obydwu opcji z tego wątku zarówno z usunięciem paczki jak i z komendy --dump pomaga tylko chwilowo rano znów ten sam problem wraca.
Obydwa uruchomienia z bootchart dla przykładu:
https://dl.dropboxusercontent.com/u/316 ... 0822-3.png
https://dl.dropboxusercontent.com/u/316 ... 0823-1.png

Ktoś ma jakiś pomysł co z tym zrobić?
pozdrawiam

[bear7]

Folkstorm, możesz wrzucić wynik poniższego polecenia zaraz po uruchomieniu komputera po tym, jak ten problem się ujawnia:

Kod: Zaznacz cały

dmesg

[folkstorm]

Folkstorm, możesz wrzucić wynik poniższego polecenia zaraz po uruchomieniu komputera po tym, jak ten problem się ujawnia:

Kod: Zaznacz cały

dmesg

Kod: Zaznacz cały

[    0.327814] pci_bus 0000:11: resource 1 [mem 0xd0c00000-0xd0dfffff]
[    0.327815] pci_bus 0000:11: resource 2 [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.327817] pci_bus 0000:12: resource 0 [io  0x3000-0x3fff]
[    0.327819] pci_bus 0000:12: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.327821] pci_bus 0000:12: resource 2 [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.327823] pci_bus 0000:13: resource 0 [io  0xe000-0xefff]
[    0.327825] pci_bus 0000:13: resource 1 [mem 0xd1200000-0xd15fffff]
[    0.327826] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.327828] pci_bus 0000:15: resource 0 [io  0xd000-0xdfff]
[    0.327830] pci_bus 0000:15: resource 1 [mem 0xfb400000-0xfbdfffff]
[    0.327832] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.327834] pci_bus 0000:20: resource 4 [io  0x0000-0x0cf7]
[    0.327836] pci_bus 0000:20: resource 5 [io  0x0d00-0xffff]
[    0.327837] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
[    0.327839] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff]
[    0.327842] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.327844] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.327876] NET: Registered protocol family 2
[    0.328039] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.328145] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.328257] TCP: Hash tables configured (established 32768 bind 32768)
[    0.328287] TCP: reno registered
[    0.328296] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.328317] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.328385] NET: Registered protocol family 1
[    0.328398] pci 0000:00:02.0: Boot video device
[    0.583076] PCI: CLS 64 bytes, default 64
[    0.583142] Trying to unpack rootfs image as initramfs...
[    1.081029] Freeing initrd memory: 28180K (ffff8800348e6000 - ffff88003646b000)
[    1.081037] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.081039] software IO TLB [mem 0xb75a8000-0xbb5a8000] (64MB) mapped at [ffff8800b75a8000-ffff8800bb5a7fff]
[    1.081331] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    1.081336] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    1.081342] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    1.081348] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    1.081417] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.081419] Scanning for low memory corruption every 60 seconds
[    1.081719] Initialise system trusted keyring
[    1.081768] audit: initializing netlink socket (disabled)
[    1.081782] type=2000 audit(1409554832.968:1): initialized
[    1.108742] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.109877] zbud: loaded
[    1.110037] VFS: Disk quotas dquot_6.5.2
[    1.110077] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.110534] fuse init (API version 7.22)
[    1.110608] msgmni has been set to 7503
[    1.110659] Key type big_key registered
[    1.111273] Key type asymmetric registered
[    1.111275] Asymmetric key parser 'x509' registered
[    1.111311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.111370] io scheduler noop registered
[    1.111372] io scheduler deadline registered (default)
[    1.111396] io scheduler cfq registered
[    1.111631] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.111804] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.111963] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.112125] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    1.112208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.112305] pciehp: Using ACPI for slot detection.
[    1.112384] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 505
[    1.112434] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    1.112439] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.112477] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.112478] vesafb: scrolling: redraw
[    1.112480] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.112757] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[    1.238063] Console: switching to colour frame buffer device 128x48
[    1.363261] fb0: VESA VGA frame buffer device
[    1.363277] intel_idle: MWAIT substates: 0x1120
[    1.363278] intel_idle: v0.4 model 0x25
[    1.363279] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.363403] ipmi message handler version 39.2
[    1.363499] ACPI: AC Adapter [AC] (on-line)
[    1.363604] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.363609] ACPI: Power Button [PWRB]
[    1.363644] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.365424] ACPI: Lid Switch [LID0]
[    1.365457] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.365460] ACPI: Sleep Button [SBTN]
[    1.365489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.365491] ACPI: Power Button [PWRF]
[    1.386366] thermal LNXTHERM:00: registered as thermal_zone0
[    1.386369] ACPI: Thermal Zone [THM] (32 C)
[    1.386392] GHES: HEST is not enabled!
[    1.386506] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.388221] Linux agpgart interface v0.103
[    1.388279] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.388337] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.389047] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.389216] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.390452] brd: module loaded
[    1.391066] loop: module loaded
[    1.391461] libphy: Fixed MDIO Bus: probed
[    1.391608] tun: Universal TUN/TAP device driver, 1.6
[    1.391610] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.391663] PPP generic driver version 2.4.2
[    1.391742] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.391748] ehci-pci: EHCI PCI platform driver
[    1.392164] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.392171] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.392188] ehci-pci 0000:00:1a.0: debug port 2
[    1.396183] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.396204] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf08000
[    1.411530] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.411652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.411660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.411664] usb usb1: Product: EHCI Host Controller
[    1.411671] usb usb1: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
[    1.411675] usb usb1: SerialNumber: 0000:00:1a.0
[    1.412032] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.412038] ACPI: Battery Slot [BAT0] (battery present)
[    1.412268] hub 1-0:1.0: USB hub found
[    1.412281] hub 1-0:1.0: 2 ports detected
[    1.412472] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.412477] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.412492] ehci-pci 0000:00:1d.0: debug port 2
[    1.416502] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.416517] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf07000
[    1.427523] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.427639] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.427642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.427643] usb usb2: Product: EHCI Host Controller
[    1.427645] usb usb2: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
[    1.427647] usb usb2: SerialNumber: 0000:00:1d.0
[    1.427927] hub 2-0:1.0: USB hub found
[    1.427942] hub 2-0:1.0: 2 ports detected
[    1.428032] ehci-platform: EHCI generic platform driver
[    1.428039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.428040] ohci-pci: OHCI PCI platform driver
[    1.428048] ohci-platform: OHCI generic platform driver
[    1.428053] uhci_hcd: USB Universal Host Controller Interface driver
[    1.428107] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    1.454338] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.454343] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.454913] mousedev: PS/2 mouse device common for all mice
[    1.456276] rtc_cmos 00:02: RTC can wake from S4
[    1.456669] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.456715] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.456798] device-mapper: uevent: version 1.0.3
[    1.457093] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.457108] ledtrig-cpu: registered to indicate activity on CPUs
[    1.457266] TCP: cubic registered
[    1.457351] NET: Registered protocol family 10
[    1.457519] NET: Registered protocol family 17
[    1.457529] Key type dns_resolver registered
[    1.458801] Loading compiled-in X.509 certificates
[    1.459936] Loaded X.509 cert 'Magrathea: Glacier signing key: 500bc5c87d4b115cf3c1504f7a92e233c6143d58'
[    1.459956] registered taskstats version 1
[    1.463548] Key type trusted registered
[    1.466684] Key type encrypted registered
[    1.469685] AppArmor: AppArmor sha1 policy hashing enabled
[    1.469693] IMA: No TPM chip found, activating TPM-bypass!
[    1.470073] regulator-dummy: disabling
[    1.470319]   Magic number: 14:792:14
[    1.470513] rtc_cmos 00:02: setting system clock to 2014-09-01 07:00:33 UTC (1409554833)
[    1.471693] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.471696] EDD information not available.
[    1.471735] PM: Hibernation image not present or could not be loaded.
[    1.473246] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    1.473249] Write protecting the kernel read-only data: 12288k
[    1.475599] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[    1.477528] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[    1.489239] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.498687] systemd-udevd[116]: starting version 204
[    1.524061] wmi: Mapper loaded
[    1.530049] [drm] Initialized drm 1.1.0 20060810
[    1.533888] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.534172] r8169 0000:13:00.0: irq 44 for MSI/MSI-X
[    1.534383] r8169 0000:13:00.0 eth0: RTL8105e at 0xffffc9000062c000, 18:03:73:69:f3:87, XID 00a00000 IRQ 44
[    1.538863] ahci 0000:00:1f.2: version 3.0
[    1.539054] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.551616] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.551624] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst 
[    1.596300] scsi0 : ahci
[    1.596409] scsi1 : ahci
[    1.596494] scsi2 : ahci
[    1.596589] scsi3 : ahci
[    1.596748] scsi4 : ahci
[    1.596876] scsi5 : ahci
[    1.596937] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 45
[    1.596941] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 45
[    1.596946] ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200 irq 45
[    1.596950] ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280 irq 45
[    1.596955] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 45
[    1.596958] ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380 irq 45
[    1.597631] [drm] Memory usable by graphics device = 2048M
[    1.597635] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    1.597636] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.597653] Console: switching to colour dummy device 80x25
[    1.643674] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    1.643701] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.643705] [drm] Driver supports precise vblank timestamp query.
[    1.643776] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.686116] fbcon: inteldrmfb (fb0) is primary device
[    1.723702] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.856333] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.856336] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.856757] hub 1-1:1.0: USB hub found
[    1.856903] hub 1-1:1.0: 6 ports detected
[    1.915813] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.915841] ata6: SATA link down (SStatus 0 SControl 300)
[    1.915877] ata3: SATA link down (SStatus 0 SControl 300)
[    1.915904] ata4: SATA link down (SStatus 0 SControl 300)
[    1.915945] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.915976] ata5: SATA link down (SStatus 0 SControl 300)
[    1.917259] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.917262] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.918857] ata1.00: configured for UDMA/133
[    1.919142] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[    1.919332] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.919343] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.919413] sd 0:0:0:0: [sda] Write Protect is off
[    1.919415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.919476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.930711] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B1, D.04, max UDMA/100
[    1.943680] ata2.00: configured for UDMA/100
[    1.956709] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8B1    D.04 PQ: 0 ANSI: 5
[    1.967861] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.970979] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.970981] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.971233] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.971332] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.997697]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.998402] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.079830] tsc: Refined TSC clocksource calibration: 2393.912 MHz
[    2.100336] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.100340] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.100731] hub 2-1:1.0: USB hub found
[    2.100834] hub 2-1:1.0: 8 ports detected
[    2.172059] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    2.269173] usb 1-1.2: New USB device found, idVendor=0a5c, idProduct=21bc
[    2.269177] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.269180] usb 1-1.2: Product: Dell Wireless 1701 Bluetooth
[    2.269183] usb 1-1.2: Manufacturer: Broadcom Corp
[    2.269185] usb 1-1.2: SerialNumber: CCAF788F09DE
[    2.340086] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.444811] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[    2.444814] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.444816] usb 1-1.3: Product: USB2.0-CRW
[    2.444817] usb 1-1.3: Manufacturer: Generic
[    2.444819] usb 1-1.3: SerialNumber: 20090516388200000
[    2.454225] usbcore: registered new interface driver usb-storage
[    2.455595] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[    2.475290] scsi6 : usb-storage 1-1.3:1.0
[    2.475391] usbcore: registered new interface driver ums-realtek
[    2.520414] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[    2.572198] Console: switching to colour frame buffer device 170x48
[    2.575229] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.575231] i915 0000:00:02.0: registered panic notifier
[    2.576878] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.577198] acpi device:2a: registered as cooling_device4
[    2.577308] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.577422] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.679960] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=643d
[    2.679969] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.679974] usb 1-1.4: Product: Laptop_Integrated_Webcam_0.3M
[    2.679979] usb 1-1.4: Manufacturer: CN0JYKKC7248716G02YGA01
[    2.688101] usb 1-1.3: USB disconnect, device number 4
[    2.888582] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[    2.997015] usb 2-1.2: New USB device found, idVendor=0763, idProduct=2024
[    2.997020] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.997023] usb 2-1.2: Product: Fast Track
[    2.997026] usb 2-1.2: Manufacturer: M-Audio
[    3.068653] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    3.080559] Switched to clocksource tsc
[    3.165451] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[    3.165459] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.165464] usb 2-1.3: Product: Optical Mouse
[    3.165469] usb 2-1.3: Manufacturer: Genius
[    3.171027] hidraw: raw HID events driver (C) Jiri Kosina
[    3.175340] usbcore: registered new interface driver usbhid
[    3.175342] usbhid: USB HID core driver
[    3.178230] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[    3.178368] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[    3.236572] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[    3.330426] usb 2-1.4: New USB device found, idVendor=0d49, idProduct=7310
[    3.330434] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.330440] usb 2-1.4: Product: OneTouch        
[    3.330444] usb 2-1.4: Manufacturer: Maxtor  
[    3.330448] usb 2-1.4: SerialNumber: 2HA1C2DM    
[    3.330976] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[    3.331046] usb-storage 2-1.4:1.0: Quirks match for vid 0d49 pid 7310: 8000
[    3.331078] scsi7 : usb-storage 2-1.4:1.0
[    3.386488] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    3.416527] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[    4.330054] scsi 7:0:0:0: Direct-Access     Maxtor   OneTouch         0125 PQ: 0 ANSI: 4
[    4.330481] sd 7:0:0:0: Attached scsi generic sg2 type 0
[    4.331302] sd 7:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    4.332069] sd 7:0:0:0: [sdb] Write Protect is off
[    4.332077] sd 7:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[    4.332979] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.332987] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.335540] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.335546] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.347043] random: nonblocking pool is initialized
[    4.362603]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    4.366324] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.366332] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.366359] sd 7:0:0:0: [sdb] Attached SCSI disk
[    7.730865] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   63.406791] usb 2-1.3: USB disconnect, device number 4
[   64.884528] usb 2-1.3: new low-speed USB device number 6 using ehci-pci
[   64.980573] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[   64.980579] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.980582] usb 2-1.3: Product: Optical Mouse
[   64.980585] usb 2-1.3: Manufacturer: Genius
[   64.984877] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[   64.985352] hid-generic 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  125.138598] usb 2-1.3: USB disconnect, device number 6
[  126.616350] usb 2-1.3: new low-speed USB device number 7 using ehci-pci
[  126.712417] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  126.712422] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  126.712425] usb 2-1.3: Product: Optical Mouse
[  126.712428] usb 2-1.3: Manufacturer: Genius
[  126.716665] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input11
[  126.717218] hid-generic 0003:0458:003A.0003: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  186.870400] usb 2-1.3: USB disconnect, device number 7
[  188.348038] usb 2-1.3: new low-speed USB device number 8 using ehci-pci
[  188.444187] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  188.444193] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  188.444196] usb 2-1.3: Product: Optical Mouse
[  188.444199] usb 2-1.3: Manufacturer: Genius
[  188.448026] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
[  188.448192] hid-generic 0003:0458:003A.0004: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  222.947391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  223.579221] init: bootchart main process (366) terminated with status 127
[  224.988684] systemd-udevd[394]: starting version 204
[  231.861292] init: bootchart post-stop process (387) terminated with status 127
[  231.906842] lp: driver loaded but no devices found
[  231.998971] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[  232.009080] ppdev: user-space parallel port driver
[  232.127965] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[  232.128366] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[  232.133245] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  232.133255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  232.133306] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  232.133312] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  232.133315] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  232.133319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  232.133321] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  232.313451] device-mapper: multipath: version 1.6.0 loaded
[  232.410264] cfg80211: Calling CRDA to update world regulatory domain
[  232.432509] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[  232.473469] Bluetooth: Core ver 2.17
[  232.473501] NET: Registered protocol family 31
[  232.473503] Bluetooth: HCI device and connection manager initialized
[  232.473514] Bluetooth: HCI socket layer initialized
[  232.473517] Bluetooth: L2CAP socket layer initialized
[  232.473522] Bluetooth: SCO socket layer initialized
[  232.557350] usbcore: registered new interface driver btusb
[  232.581371] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[  232.598736] lib80211: common routines for IEEE802.11 drivers
[  232.598740] lib80211_crypt: registered algorithm 'NULL'
[  232.763626] wl: module license 'MIXED/Proprietary' taints kernel.
[  232.763635] Disabling lock debugging due to kernel taint
[  232.766173] wl: module verification failed: signature and/or  required key missing - tainting kernel
[  232.801042] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[  232.803989] lib80211_crypt: registered algorithm 'TKIP'
[  232.854286] Linux video capture interface: v2.00
[  232.862713] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  232.863779] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[  232.882179] usbcore: registered new interface driver snd-usb-audio
[  232.923089] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[  232.923095]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  232.923097]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[  232.923099]    mono: mono_out=0x0
[  232.923100]    inputs:
[  232.923103]      Internal Mic=0xc
[  232.923105]      Mic=0xa
[  232.929499] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:643d)
[  232.944931] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[  232.945529] usbcore: registered new interface driver uvcvideo
[  232.945532] USB Video Class driver (1.1.1)
[  232.977116] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[  232.977451] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[  232.979027] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  233.027997] input: Dell WMI hotkeys as /devices/virtual/input/input17
[  233.053972] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  233.226467] cfg80211: World regulatory domain updated:
[  233.226472] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  233.226475] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  233.226478] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  233.226480] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  233.226482] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  233.226485] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  233.418841] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  248.602064] usb 2-1.3: USB disconnect, device number 8
[  250.079803] usb 2-1.3: new low-speed USB device number 9 using ehci-pci
[  250.175710] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  250.175713] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  250.175716] usb 2-1.3: Product: Optical Mouse
[  250.175718] usb 2-1.3: Manufacturer: Genius
[  250.179597] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18
[  250.179755] hid-generic 0003:0458:003A.0005: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  250.537615] init: failsafe main process (766) killed by TERM signal
[  251.726297] init: cups main process (910) killed by HUP signal
[  251.726316] init: cups main process ended, respawning
[  251.983997] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  251.984002] Bluetooth: BNEP filters: protocol multicast
[  251.984017] Bluetooth: BNEP socket layer initialized
[  252.030485] Bluetooth: RFCOMM TTY layer initialized
[  252.030502] Bluetooth: RFCOMM socket layer initialized
[  252.030509] Bluetooth: RFCOMM ver 1.11
[  253.405004] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  253.732855] r8169 0000:13:00.0 eth0: link down
[  253.732876] r8169 0000:13:00.0 eth0: link down
[  253.732908] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  253.733277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  255.366257] r8169 0000:13:00.0 eth0: link up
[  255.366272] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  258.590624] init: samba-ad-dc main process (950) terminated with status 1
[  261.748147] init: plymouth-upstart-bridge main process ended, respawning
[  261.758367] init: plymouth-upstart-bridge main process (1563) terminated with status 1
[  261.758398] init: plymouth-upstart-bridge main process ended, respawning
ostry@ostry-Inspiron-N5040 ~ $ 

[gerald]

Spróbuj odłączyć wszystkie urządzenia USB od komputera i podczas bootowania systemu naciśnij e i usuń wpis quiet splash
Jak system będzie się wczytywał zobaczysz na ekranie co go blokuje.

[folkstorm]

Zrobiłem jak napisałeś, czyli odłączyłem kartę muzyczną (Fast Track M-Audio), dysk zewnętrzny i mysz.
Wszystko uruchomiło się w rozsądnym czasie, zatrzymał się jedynie na czymś związanym z Touchpad.

[bear7]

Zrobiłem jak napisałeś, czyli odłączyłem kartę muzyczną (Fast Track M-Audio), dysk zewnętrzny i mysz.
Wszystko uruchomiło się w rozsądnym czasie, zatrzymał się jedynie na czymś związanym z Touchpad.

Powtórz zatem to, o czym napisałem wcześniej:

Folkstorm, możesz wrzucić wynik poniższego polecenia zaraz po uruchomieniu komputera po tym, jak ten problem się ujawnia:

Kod: Zaznacz cały

dmesg

Co to za komputer? Jak laptop, to podaj markę i model. Jak desktop, to podaj nazwę producenta i model płyty głównej. Na jakim jajku pracuje ten Mint? Co zwracają poniższe polecenia:

Kod: Zaznacz cały

uname -a

Kod: Zaznacz cały

cat /etc/default/grub

Kod: Zaznacz cały

cat /proc/cpuinfo

Kod: Zaznacz cały

cat /proc/meminfo

Kod: Zaznacz cały

lshw -C display

Kod: Zaznacz cały

sudo dmidcode -s bios-vendor

Kod: Zaznacz cały

sudo dmidcode -s bios-version

Kod: Zaznacz cały

sudo dmidcode -s bios-release-date

Dowiemy się co nieco na temat twojej konfiguracji sprzętowej.

[folkstorm]

Laptop, Dell Inspiron-N5040, stoi na nim jeszcze Win7

Kod: Zaznacz cały

uname -a

Kod: Zaznacz cały

Linux ostry-Inspiron-N5040 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

Kod: Zaznacz cały

cat /etc/default/grub

Kod: Zaznacz cały

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=1
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Kod: Zaznacz cały

cat /proc/cpuinfo

Kod: Zaznacz cały

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 37
model name	: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz
stepping	: 5
microcode	: 0x2
cpu MHz		: 931.000
cache size	: 3072 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 11
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid
bogomips	: 4787.56
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 37
model name	: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz
stepping	: 5
microcode	: 0x2
cpu MHz		: 931.000
cache size	: 3072 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 2
apicid		: 4
initial apicid	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 11
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid
bogomips	: 4787.56
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 37
model name	: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz
stepping	: 5
microcode	: 0x2
cpu MHz		: 931.000
cache size	: 3072 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 11
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid
bogomips	: 4787.56
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 37
model name	: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz
stepping	: 5
microcode	: 0x2
cpu MHz		: 931.000
cache size	: 3072 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 2
apicid		: 5
initial apicid	: 5
fpu		: yes
fpu_exception	: yes
cpuid level	: 11
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid
bogomips	: 4787.56
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

Kod: Zaznacz cały

cat /proc/meminfo

Kod: Zaznacz cały

MemTotal:        3844388 kB
MemFree:         1046268 kB
Buffers:          124784 kB
Cached:          1045748 kB
SwapCached:            0 kB
Active:          1731804 kB
Inactive:         895904 kB
Active(anon):    1459608 kB
Inactive(anon):   283664 kB
Active(file):     272196 kB
Inactive(file):   612240 kB
Unevictable:          16 kB
Mlocked:              16 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:               168 kB
Writeback:             0 kB
AnonPages:       1456908 kB
Mapped:           249264 kB
Shmem:            286100 kB
Slab:              77944 kB
SReclaimable:      46324 kB
SUnreclaim:        31620 kB
KernelStack:        4184 kB
PageTables:        33044 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1922192 kB
Committed_AS:    4713880 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      543744 kB
VmallocChunk:   34359186428 kB
HardwareCorrupted:     0 kB
AnonHugePages:    286720 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:       95308 kB
DirectMap2M:     3893248 kB

Kod: Zaznacz cały

lshw -C display

Kod: Zaznacz cały

  *-display               
       description: VGA compatible controller
       product: Core Processor Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 02
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:46 memory:fb000000-fb3fffff memory:c0000000-cfffffff ioport:f080(size=8)

Kod: Zaznacz cały

sudo dmidcode -s bios-vendor

Kod: Zaznacz cały

Dell Inc.

Kod: Zaznacz cały

sudo dmidcode -s bios-version

Kod: Zaznacz cały

A02

Kod: Zaznacz cały

sudo dmidcode -s bios-release-date

Kod: Zaznacz cały

05/31/2011

Wkleję

Kod: Zaznacz cały

dmesg

z rana bo teraz wszystko będzie w normie
Jajko 3.13.0-34

[bear7]

Możesz jeszcze sprawdzić bezpośrednio w BIOS-ie, które to jest jego wydanie i jaka jest data jego wydania. dmidcode nie zawsze jest wstanie podać dokładne informacje, ale jeżeli w twoim wypadku podaje dokładną wersję i datę (a coś mnie się wydaje, że tak jest), to dla twojego komputera DELL wypuścił aktualizację BIOS-a. Może się przydać aktualizacja BIOS-a (jak przeprowadzić aktualizację, znajdziesz na stronie producenta sprzętu).

Zanim to zrobisz, pokaż ten dmesg, gdy będziesz miał czas...

[folkstorm]

Kod: Zaznacz cały

dmesg

Z dziś rana bez żadnego urządzenia USB

Kod: Zaznacz cały

[    0.324477] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.324573] NetLabel: Initializing
[    0.324628] NetLabel:  domain hash size = 128
[    0.324682] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.324759] NetLabel:  unlabeled traffic allowed by default
[    0.324883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.325165] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.327269] Switched to clocksource hpet
[    0.332195] AppArmor: AppArmor Filesystem Enabled
[    0.332293] pnp: PnP ACPI init
[    0.332365] ACPI: bus type PNP registered
[    0.332565] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.332634] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.332701] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.332769] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.332833] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.332900] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.332922] pnp 00:01: [dma 4]
[    0.332939] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.332972] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.332993] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.333018] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.333063] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.333126] system 00:05: [mem 0xfe800000-0xfe8001ff] has been reserved
[    0.333191] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.333226] pnp 00:06: Plug and Play ACPI device, IDs DLL0505 SYN0600 SYN0002 PNP0f13 (active)
[    0.333256] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.333402] system 00:08: [io  0x0400-0x047f] could not be reserved
[    0.333470] system 00:08: [io  0x1180-0x119f] has been reserved
[    0.333532] system 00:08: [io  0x0500-0x057f] has been reserved
[    0.333599] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.333665] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.333734] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.333797] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.333866] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.333972] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.334180] pnp: PnP ACPI: found 10 devices
[    0.334241] ACPI: bus type PNP unregistered
[    0.341306] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 11] add_size 1000
[    0.341311] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000
[    0.341313] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000
[    0.341324] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 12] add_size 1000
[    0.341326] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000
[    0.341338] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 13] add_size 400000
[    0.341361] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.341364] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.341366] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.341368] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.341370] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.341372] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.341377] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0c00000-0xd0dfffff]
[    0.341443] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.341537] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.341632] pci 0000:00:1c.2: BAR 14: assigned [mem 0xd1200000-0xd15fffff]
[    0.341700] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.341769] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.341833] pci 0000:00:1c.0: PCI bridge to [bus 11]
[    0.341894] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.341961] pci 0000:00:1c.0:   bridge window [mem 0xd0c00000-0xd0dfffff]
[    0.342028] pci 0000:00:1c.0:   bridge window [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.342123] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.342184] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.342250] pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.342319] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.342415] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.342481] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.342550] pci 0000:00:1c.2:   bridge window [mem 0xd1200000-0xd15fffff]
[    0.342623] pci 0000:00:1c.2:   bridge window [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.342713] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.342773] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.342841] pci 0000:00:1c.4:   bridge window [mem 0xfb400000-0xfbdfffff]
[    0.342911] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.343008] pci 0000:00:1e.0: PCI bridge to [bus 20]
[    0.343081] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.343083] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.343085] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.343087] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[    0.343089] pci_bus 0000:11: resource 0 [io  0x2000-0x2fff]
[    0.343091] pci_bus 0000:11: resource 1 [mem 0xd0c00000-0xd0dfffff]
[    0.343092] pci_bus 0000:11: resource 2 [mem 0xd0e00000-0xd0ffffff 64bit pref]
[    0.343094] pci_bus 0000:12: resource 0 [io  0x3000-0x3fff]
[    0.343096] pci_bus 0000:12: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.343098] pci_bus 0000:12: resource 2 [mem 0xd1000000-0xd11fffff 64bit pref]
[    0.343100] pci_bus 0000:13: resource 0 [io  0xe000-0xefff]
[    0.343102] pci_bus 0000:13: resource 1 [mem 0xd1200000-0xd15fffff]
[    0.343103] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd0bfffff 64bit pref]
[    0.343105] pci_bus 0000:15: resource 0 [io  0xd000-0xdfff]
[    0.343107] pci_bus 0000:15: resource 1 [mem 0xfb400000-0xfbdfffff]
[    0.343109] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.343111] pci_bus 0000:20: resource 4 [io  0x0000-0x0cf7]
[    0.343112] pci_bus 0000:20: resource 5 [io  0x0d00-0xffff]
[    0.343114] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
[    0.343116] pci_bus 0000:20: resource 7 [mem 0xc0000000-0xffffffff]
[    0.343119] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.343120] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.343153] NET: Registered protocol family 2
[    0.343381] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.343573] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.343752] TCP: Hash tables configured (established 32768 bind 32768)
[    0.343847] TCP: reno registered
[    0.343909] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.343995] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.344126] NET: Registered protocol family 1
[    0.344194] pci 0000:00:02.0: Boot video device
[    0.599594] PCI: CLS 64 bytes, default 64
[    0.599661] Trying to unpack rootfs image as initramfs...
[    1.098135] Freeing initrd memory: 28192K (ffff8800348e0000 - ffff880036468000)
[    1.098233] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.098299] software IO TLB [mem 0xb75a8000-0xbb5a8000] (64MB) mapped at [ffff8800b75a8000-ffff8800bb5a7fff]
[    1.098661] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    1.098731] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    1.098802] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    1.098873] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    1.099005] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.099101] Scanning for low memory corruption every 60 seconds
[    1.099462] Initialise system trusted keyring
[    1.099570] audit: initializing netlink socket (disabled)
[    1.099647] type=2000 audit(1409641303.980:1): initialized
[    1.126736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.128473] zbud: loaded
[    1.128685] VFS: Disk quotas dquot_6.5.2
[    1.128782] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.129301] fuse init (API version 7.22)
[    1.129430] msgmni has been set to 7503
[    1.129540] Key type big_key registered
[    1.130198] Key type asymmetric registered
[    1.130262] Asymmetric key parser 'x509' registered
[    1.130355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.130493] io scheduler noop registered
[    1.130559] io scheduler deadline registered (default)
[    1.130646] io scheduler cfq registered
[    1.130941] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.131113] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.131272] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.131434] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    1.131517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.131680] pciehp: Using ACPI for slot detection.
[    1.131833] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 505
[    1.131971] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    1.131976] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.132085] intel_idle: MWAIT substates: 0x1120
[    1.132087] intel_idle: v0.4 model 0x25
[    1.132088] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.132197] ipmi message handler version 39.2
[    1.132314] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.132451] ACPI: AC Adapter [AC] (on-line)
[    1.132619] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.132709] ACPI: Power Button [PWRB]
[    1.132800] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.134855] ACPI: Lid Switch [LID0]
[    1.134944] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.135037] ACPI: Sleep Button [SBTN]
[    1.135124] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.135213] ACPI: Power Button [PWRF]
[    1.154924] thermal LNXTHERM:00: registered as thermal_zone0
[    1.154992] ACPI: Thermal Zone [THM] (46 C)
[    1.155069] GHES: HEST is not enabled!
[    1.155230] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.157499] Linux agpgart interface v0.103
[    1.157612] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.157732] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.158541] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.158793] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.160417] brd: module loaded
[    1.161185] loop: module loaded
[    1.161591] libphy: Fixed MDIO Bus: probed
[    1.161726] tun: Universal TUN/TAP device driver, 1.6
[    1.161790] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.161908] PPP generic driver version 2.4.2
[    1.162018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.162091] ehci-pci: EHCI PCI platform driver
[    1.162291] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.162361] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.162466] ehci-pci 0000:00:1a.0: debug port 2
[    1.166543] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.166572] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf08000
[    1.175838] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.175962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.176048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.176153] usb usb1: Product: EHCI Host Controller
[    1.176216] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    1.176239] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.176243] ACPI: Battery Slot [BAT0] (battery present)
[    1.176437] usb usb1: SerialNumber: 0000:00:1a.0
[    1.176622] hub 1-0:1.0: USB hub found
[    1.176687] hub 1-0:1.0: 2 ports detected
[    1.176924] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.176989] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.177092] ehci-pci 0000:00:1d.0: debug port 2
[    1.181142] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.181167] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf07000
[    1.191913] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.192085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.192155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.192244] usb usb2: Product: EHCI Host Controller
[    1.192308] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    1.192375] usb usb2: SerialNumber: 0000:00:1d.0
[    1.192696] hub 2-0:1.0: USB hub found
[    1.192763] hub 2-0:1.0: 2 ports detected
[    1.192913] ehci-platform: EHCI generic platform driver
[    1.192978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.193045] ohci-pci: OHCI PCI platform driver
[    1.193112] ohci-platform: OHCI generic platform driver
[    1.193177] uhci_hcd: USB Universal Host Controller Interface driver
[    1.193291] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    1.220651] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.220717] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.221378] mousedev: PS/2 mouse device common for all mice
[    1.222954] rtc_cmos 00:02: RTC can wake from S4
[    1.223264] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.223372] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.223529] device-mapper: uevent: version 1.0.3
[    1.223712] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.223858] ledtrig-cpu: registered to indicate activity on CPUs
[    1.224033] TCP: cubic registered
[    1.224176] NET: Registered protocol family 10
[    1.224404] NET: Registered protocol family 17
[    1.224474] Key type dns_resolver registered
[    1.225286] Loading compiled-in X.509 certificates
[    1.226419] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    1.226533] registered taskstats version 1
[    1.230098] Key type trusted registered
[    1.233147] Key type encrypted registered
[    1.236142] AppArmor: AppArmor sha1 policy hashing enabled
[    1.236221] IMA: No TPM chip found, activating TPM-bypass!
[    1.236649] regulator-dummy: disabling
[    1.236844]   Magic number: 14:867:14
[    1.237079] rtc_cmos 00:02: setting system clock to 2014-09-02 07:01:44 UTC (1409641304)
[    1.238470] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.238539] EDD information not available.
[    1.238638] PM: Hibernation image not present or could not be loaded.
[    1.240135] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    1.240272] Write protecting the kernel read-only data: 12288k
[    1.242637] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[    1.244600] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    1.255195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.262327] systemd-udevd[116]: starting version 204
[    1.284973] wmi: Mapper loaded
[    1.290100] [drm] Initialized drm 1.1.0 20060810
[    1.293846] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.294180] r8169 0000:13:00.0: irq 44 for MSI/MSI-X
[    1.294391] r8169 0000:13:00.0 eth0: RTL8105e at 0xffffc9000062c000, 18:03:73:69:f3:87, XID 00a00000 IRQ 44
[    1.297588] ahci 0000:00:1f.2: version 3.0
[    1.297809] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.312442] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.312539] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst 
[    1.352560] scsi0 : ahci
[    1.352762] scsi1 : ahci
[    1.352924] scsi2 : ahci
[    1.353077] scsi3 : ahci
[    1.353242] scsi4 : ahci
[    1.353382] scsi5 : ahci
[    1.353486] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 45
[    1.353583] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 45
[    1.353675] ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200 irq 45
[    1.353764] ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280 irq 45
[    1.353855] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 45
[    1.353947] ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380 irq 45
[    1.354720] [drm] Memory usable by graphics device = 2048M
[    1.400021] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    1.400032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.400097] [drm] Driver supports precise vblank timestamp query.
[    1.400228] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.442619] fbcon: inteldrmfb (fb0) is primary device
[    1.488054] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.620549] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.620552] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.620942] hub 1-1:1.0: USB hub found
[    1.621115] hub 1-1:1.0: 6 ports detected
[    1.672172] ata3: SATA link down (SStatus 0 SControl 300)
[    1.672208] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.672245] ata4: SATA link down (SStatus 0 SControl 300)
[    1.673677] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.673680] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.675304] ata1.00: configured for UDMA/133
[    1.675594] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[    1.675830] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.675832] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.675911] sd 0:0:0:0: [sda] Write Protect is off
[    1.675913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.675939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.676113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.676159] ata6: SATA link down (SStatus 0 SControl 300)
[    1.676227] ata5: SATA link down (SStatus 0 SControl 300)
[    1.688301] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B1, D.04, max UDMA/100
[    1.706658] ata2.00: configured for UDMA/100
[    1.719826] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8B1    D.04 PQ: 0 ANSI: 5
[    1.729496]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.730613] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.732192] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.734230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.734232] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.734551] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.734642] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.864750] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.864752] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.865007] hub 2-1:1.0: USB hub found
[    1.865131] hub 2-1:1.0: 8 ports detected
[    1.936411] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    2.033433] usb 1-1.2: New USB device found, idVendor=0a5c, idProduct=21bc
[    2.033437] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.033440] usb 1-1.2: Product: Dell Wireless 1701 Bluetooth
[    2.033443] usb 1-1.2: Manufacturer: Broadcom Corp
[    2.033446] usb 1-1.2: SerialNumber: CCAF788F09DE
[    2.096363] tsc: Refined TSC clocksource calibration: 2393.912 MHz
[    2.104598] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.209489] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[    2.209491] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.209493] usb 1-1.3: Product: USB2.0-CRW
[    2.209495] usb 1-1.3: Manufacturer: Generic
[    2.209497] usb 1-1.3: SerialNumber: 20090516388200000
[    2.218628] usbcore: registered new interface driver usb-storage
[    2.220015] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[    2.239510] scsi6 : usb-storage 1-1.3:1.0
[    2.239642] usbcore: registered new interface driver ums-realtek
[    2.284596] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[    2.367572] Console: switching to colour frame buffer device 170x48
[    2.410985] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.412259] i915 0000:00:02.0: registered panic notifier
[    2.417491] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.419097] acpi device:2a: registered as cooling_device4
[    2.420499] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.422174] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.444213] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=643d
[    2.445589] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.445591] usb 1-1.4: Product: Laptop_Integrated_Webcam_0.3M
[    2.445592] usb 1-1.4: Manufacturer: CN0JYKKC7248716G02YGA01
[    2.453178] usb 1-1.3: USB disconnect, device number 4
[    2.725903] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.097261] Switched to clocksource tsc
[    3.123857] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    3.153279] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.367849] random: init urandom read with 124 bits of entropy available
[    3.433159] random: nonblocking pool is initialized
[    9.634265] init: bootchart main process (359) terminated with status 127
[    9.750372] systemd-udevd[384]: starting version 204
[    9.835644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.238266] lp: driver loaded but no devices found
[   10.253657] ppdev: user-space parallel port driver
[   10.758820] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[   10.758830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.758833] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[   10.758838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.758840] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[   10.758844] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.758846] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.808504] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   10.808780] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   11.113608] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   11.133619] cfg80211: Calling CRDA to update world regulatory domain
[   11.139116] Bluetooth: Core ver 2.17
[   11.139139] NET: Registered protocol family 31
[   11.139141] Bluetooth: HCI device and connection manager initialized
[   11.139154] Bluetooth: HCI socket layer initialized
[   11.139157] Bluetooth: L2CAP socket layer initialized
[   11.139162] Bluetooth: SCO socket layer initialized
[   11.150772] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[   11.156108] lib80211: common routines for IEEE802.11 drivers
[   11.156113] lib80211_crypt: registered algorithm 'NULL'
[   11.161007] init: bootchart post-stop process (376) terminated with status 127
[   11.277746] device-mapper: multipath: version 1.6.0 loaded
[   11.346309] usbcore: registered new interface driver btusb
[   11.528835] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   11.615206] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.615210] Disabling lock debugging due to kernel taint
[   11.618570] wl: module verification failed: signature and/or  required key missing - tainting kernel
[   11.637027] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   11.657448] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   11.660113] Linux video capture interface: v2.00
[   11.672704] lib80211_crypt: registered algorithm 'TKIP'
[   11.710538] input: Dell WMI hotkeys as /devices/virtual/input/input9
[   11.723611] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   11.723616]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.723618]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   11.723620]    mono: mono_out=0x0
[   11.723621]    inputs:
[   11.723623]      Internal Mic=0xc
[   11.723625]      Mic=0xa
[   11.733910] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[   11.800255] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.800349] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.800416] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.918344] cfg80211: World regulatory domain updated:
[   11.918349] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.918351] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.918353] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.918354] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.918356] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.918357] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.964081] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:643d)
[   11.979100] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[   11.979197] usbcore: registered new interface driver uvcvideo
[   11.979199] USB Video Class driver (1.1.1)
[   12.477091] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.745693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.585301] init: failsafe main process (712) killed by TERM signal
[   18.068061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.068064] Bluetooth: BNEP filters: protocol multicast
[   18.068076] Bluetooth: BNEP socket layer initialized
[   18.122642] init: cups main process (817) killed by HUP signal
[   18.122657] init: cups main process ended, respawning
[   18.366508] Bluetooth: RFCOMM TTY layer initialized
[   18.366524] Bluetooth: RFCOMM socket layer initialized
[   18.366531] Bluetooth: RFCOMM ver 1.11
[   20.657743] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.894311] r8169 0000:13:00.0 eth0: link down
[   20.894331] r8169 0000:13:00.0 eth0: link down
[   20.894407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.894898] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.797407] init: samba-ad-dc main process (924) terminated with status 1
[   22.622084] r8169 0000:13:00.0 eth0: link up
[   22.622101] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.562478] init: plymouth-upstart-bridge main process ended, respawning
[   23.570101] init: plymouth-upstart-bridge main process (1385) terminated with status 1
[   23.570141] init: plymouth-upstart-bridge main process ended, respawning
ostry@ostry-Inspiron-N5040 ~ $ 

Co do Biosu to znalazłem tylko wersję A02 bez żadnych dat.

[gerald]

Napisz w jakim czasie się uruchomił jak normalnie to podpinaj pojedynczo USB i patrz na którym go przytyka.

Wyłącz KVM -virtualisation technology w BIOS i zobaczymy

[folkstorm]

Podniósł się w krócej niż 1 min.
Wrócę z pracy to będę testował ale mam dziwne wrażenie że padnie na dysk.

[bear7]

Podniósł się w krócej niż 1 min.

Ja bym powiedział, że - przy braku dodatkowych urządzeń podpiętych pod USB - w 23 sekundy:

Kod: Zaznacz cały

[   23.570141] init: plymouth-upstart-bridge main process ended, respawning
ostry@ostry-Inspiron-N5040 ~ $ 

A tutaj masz czas, jak twój komputer potrzebował do uruchomienia z urządzeniami USB:
Przy podłączonych urządzeniach do USB:

Kod: Zaznacz cały

[  261.758398] init: plymouth-upstart-bridge main process ended, respawning
ostry@ostry-Inspiron-N5040 ~ $ 

Różnica to jakieś 4 minuty...

Wrócę z pracy to będę testował ale mam dziwne wrażenie że padnie na dysk.

Sprawdź zachowanie komputera, gdy do portu USB podłączone jest tylko jedno urządzenia na raz. Wina może leżeć po stronie któregoś z urządzeń lub ilości podłączonych urządzeń jednocześnie. W takim przypadku, aktualizacja BIOS-a może pomóc.

[folkstorm]

Odpiąłem sam dysk na razie no i start w normie, nie pozostaje jak zrobić update Biosu zatem.

[bear7]

Odpiąłem sam dysk na razie no i start w normie, nie pozostaje jak zrobić update Biosu zatem.

To może inaczej. Jak podpinasz zewnętrzny dysk, to problem się powtarza? Ile portów USB masz na tym komputerze? Czy wszystkie porty są po tej samej stronie? Sprawdzałeś, czy gdy podłączysz dysk do innego portu, to problem się powtarza?

Z innej beczki. Masz może dostęp do innego kabla łączącego dysk z komputerem? Uwierz mi, że w przypadku niektórych komputerów, długość/rodzaj/typ kabla ma znaczenie. Warto czasami sprawdzić na innym kablu.

[folkstorm]

3 party USB wszystkie zajęte, mysz, dysk, karta muzyczna, nie testowałem zamiany usb kabli też nie zmieniałem.
Zobaczymy co będzie rano.

Sprawa chyba rozwiązana, zrobiłem dwa testy z wszystkimi urządzeniami start jest w granicach 60 sek wiec w normie.
Dzięki za pomoc.

[bear7]

Sprawa chyba rozwiązana, zrobiłem dwa testy z wszystkimi urządzeniami start jest w granicach 60 sek wiec w normie.
Dzięki za pomoc.

To zrobiłeś coś (zmieniłeś układ podłączonych urządzeń/zmieniłeś kable/usunąłeś coś/dodałeś coś/zaktualizowałeś coś), czy udało się dwa razy i liczysz, że tak już zostanie? Pytam, bo może ktoś będzie miał podobny przypadek i będzie szukał pomocy/rozwiązania.

[folkstorm]

Zrobiłem update Biosu do A05.

-- 31 gru 2014 17:35 --

Niestety problem powrócił i coraz bardziej mam wrażenie że fizycznie jest coś nie tak z dyskiem.
Zrobiłem test aplikacją Disks jednak po chwili kończy się ona SELF-TEST FAILED.

Kod: Zaznacz cały

[    1.499317] wmi: Mapper loaded
[    1.502771] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.503038] r8169 0000:13:00.0: irq 44 for MSI/MSI-X
[    1.503385] r8169 0000:13:00.0 eth0: RTL8105e at 0xffffc9000062c000, 18:03:73:69:f3:87, XID 00a00000 IRQ 44
[    1.504638] [drm] Initialized drm 1.1.0 20060810
[    1.509574] ahci 0000:00:1f.2: version 3.0
[    1.509784] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.523095] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.523104] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst 
[    1.563761] scsi0 : ahci
[    1.563925] scsi1 : ahci
[    1.564065] scsi2 : ahci
[    1.564196] scsi3 : ahci
[    1.564337] scsi4 : ahci
[    1.564465] scsi5 : ahci
[    1.564517] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 45
[    1.564520] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 45
[    1.564523] ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200 irq 45
[    1.564526] ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280 irq 45
[    1.564529] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 45
[    1.564532] ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380 irq 45
[    1.565175] [drm] Memory usable by graphics device = 2048M
[    1.565179] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    1.565181] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.565198] Console: switching to colour dummy device 80x25
[    1.611216] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    1.611230] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.611232] [drm] Driver supports precise vblank timestamp query.
[    1.611302] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.653506] fbcon: inteldrmfb (fb0) is primary device
[    1.711227] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.843858] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.843861] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.844193] hub 1-1:1.0: USB hub found
[    1.844259] hub 1-1:1.0: 6 ports detected
[    1.883352] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.883386] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.883419] ata6: SATA link down (SStatus 0 SControl 300)
[    1.883448] ata5: SATA link down (SStatus 0 SControl 300)
[    1.883474] ata4: SATA link down (SStatus 0 SControl 300)
[    1.883508] ata3: SATA link down (SStatus 0 SControl 300)
[    1.884848] ata1.00: ATA-8: WDC WD2500BJKT-75F4T0, 11.01A11, max UDMA/133
[    1.884851] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.886474] ata1.00: configured for UDMA/133
[    1.886790] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BJKT-7 11.0 PQ: 0 ANSI: 5
[    1.886966] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.886987] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.887014] sd 0:0:0:0: [sda] Write Protect is off
[    1.887017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.887038] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.895768] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B1, D.04, max UDMA/100
[    1.914112] ata2.00: configured for UDMA/100
[    1.927264] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8B1    D.04 PQ: 0 ANSI: 5
[    1.941460] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.941462] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.941618] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.941754] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.955500] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.997288]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.997800] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.075420] tsc: Refined TSC clocksource calibration: 2393.911 MHz
[    2.087962] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.087966] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.088322] hub 2-1:1.0: USB hub found
[    2.088374] hub 2-1:1.0: 8 ports detected
[    2.159627] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    2.257164] usb 1-1.2: New USB device found, idVendor=0a5c, idProduct=21bc
[    2.257168] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.257171] usb 1-1.2: Product: Dell Wireless 1701 Bluetooth
[    2.257174] usb 1-1.2: Manufacturer: Broadcom Corp
[    2.257177] usb 1-1.2: SerialNumber: CCAF788F09DE
[    2.327700] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.432404] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[    2.432407] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.432409] usb 1-1.3: Product: USB2.0-CRW
[    2.432410] usb 1-1.3: Manufacturer: Generic
[    2.432412] usb 1-1.3: SerialNumber: 20090516388200000
[    2.441903] usbcore: registered new interface driver usb-storage
[    2.443269] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[    2.463686] scsi6 : usb-storage 1-1.3:1.0
[    2.463815] usbcore: registered new interface driver ums-realtek
[    2.507743] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[    2.571774] Console: switching to colour frame buffer device 170x48
[    2.574864] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.574866] i915 0000:00:02.0: registered panic notifier
[    2.576457] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.576748] acpi device:2a: registered as cooling_device4
[    2.576827] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.576935] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.666823] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=643d
[    2.666827] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.666829] usb 1-1.4: Product: Laptop_Integrated_Webcam_0.3M
[    2.666831] usb 1-1.4: Manufacturer: CN0JYKKC7248716G02YGA01
[    2.674745] usb 1-1.3: USB disconnect, device number 4
[    2.872059] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[    2.979479] usb 2-1.2: New USB device found, idVendor=0763, idProduct=2024
[    2.979487] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.979492] usb 2-1.2: Product: Fast Track
[    2.979496] usb 2-1.2: Manufacturer: M-Audio
[    3.052152] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    3.076232] Switched to clocksource tsc
[    3.148451] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[    3.148459] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.148464] usb 2-1.3: Product: Optical Mouse
[    3.148468] usb 2-1.3: Manufacturer: Genius
[    3.153420] hidraw: raw HID events driver (C) Jiri Kosina
[    3.158218] usbcore: registered new interface driver usbhid
[    3.158220] usbhid: USB HID core driver
[    3.159812] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[    3.159951] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[    3.220250] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[    3.313835] usb 2-1.4: New USB device found, idVendor=0d49, idProduct=7310
[    3.313843] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.313848] usb 2-1.4: Product: OneTouch        
[    3.313852] usb 2-1.4: Manufacturer: Maxtor  
[    3.313856] usb 2-1.4: SerialNumber: 2HA1C2DM    
[    3.314328] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[    3.314379] usb-storage 2-1.4:1.0: Quirks match for vid 0d49 pid 7310: 8000
[    3.314408] scsi7 : usb-storage 2-1.4:1.0
[    3.342584] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[    3.370370] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.719898] random: nonblocking pool is initialized
[    4.313635] scsi 7:0:0:0: Direct-Access     Maxtor   OneTouch         0125 PQ: 0 ANSI: 4
[    4.314052] sd 7:0:0:0: Attached scsi generic sg2 type 0
[    4.314552] sd 7:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    4.315397] sd 7:0:0:0: [sdb] Write Protect is off
[    4.315406] sd 7:0:0:0: [sdb] Mode Sense: 2d 08 00 00
[    4.316265] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.316273] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.318769] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.318776] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.352187]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    4.368860] sd 7:0:0:0: [sdb] No Caching mode page found
[    4.368870] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    4.368879] sd 7:0:0:0: [sdb] Attached SCSI disk
[   10.116413] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   63.393623] usb 2-1.3: USB disconnect, device number 4
[   64.871990] usb 2-1.3: new low-speed USB device number 6 using ehci-pci
[   64.968282] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[   64.968287] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.968291] usb 2-1.3: Product: Optical Mouse
[   64.968294] usb 2-1.3: Manufacturer: Genius
[   64.972339] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[   64.972893] hid-generic 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  125.125460] usb 2-1.3: USB disconnect, device number 6
[  126.603813] usb 2-1.3: new low-speed USB device number 7 using ehci-pci
[  126.700092] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  126.700098] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  126.700101] usb 2-1.3: Product: Optical Mouse
[  126.700104] usb 2-1.3: Manufacturer: Genius
[  126.704000] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input11
[  126.704674] hid-generic 0003:0458:003A.0003: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  186.857252] usb 2-1.3: USB disconnect, device number 7
[  188.335617] usb 2-1.3: new low-speed USB device number 8 using ehci-pci
[  188.431914] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  188.431919] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  188.431923] usb 2-1.3: Product: Optical Mouse
[  188.431925] usb 2-1.3: Manufacturer: Genius
[  188.435822] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
[  188.436378] hid-generic 0003:0458:003A.0004: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  248.589046] usb 2-1.3: USB disconnect, device number 8
[  250.067290] usb 2-1.3: new low-speed USB device number 9 using ehci-pci
[  250.163887] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  250.163895] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  250.163900] usb 2-1.3: Product: Optical Mouse
[  250.163904] usb 2-1.3: Manufacturer: Genius
[  250.167987] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[  250.168543] hid-generic 0003:0458:003A.0005: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  284.114919] ata1.00: exception Emask 0x0 SAct 0x5cd68400 SErr 0x0 action 0x6 frozen
[  284.114926] ata1.00: failed command: READ FPDMA QUEUED
[  284.114934] ata1.00: cmd 60/b8:50:60:e7:60/01:00:04:00:00/40 tag 10 ncq 225280 in
[  284.114934]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114937] ata1.00: status: { DRDY }
[  284.114940] ata1.00: failed command: READ FPDMA QUEUED
[  284.114946] ata1.00: cmd 60/b8:78:a0:1b:61/02:00:04:00:00/40 tag 15 ncq 356352 in
[  284.114946]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114949] ata1.00: status: { DRDY }
[  284.114952] ata1.00: failed command: READ FPDMA QUEUED
[  284.114958] ata1.00: cmd 60/00:88:20:20:61/01:00:04:00:00/40 tag 17 ncq 131072 in
[  284.114958]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114961] ata1.00: status: { DRDY }
[  284.114964] ata1.00: failed command: READ FPDMA QUEUED
[  284.114970] ata1.00: cmd 60/00:90:40:14:61/04:00:04:00:00/40 tag 18 ncq 524288 in
[  284.114970]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114973] ata1.00: status: { DRDY }
[  284.114976] ata1.00: failed command: READ FPDMA QUEUED
[  284.114981] ata1.00: cmd 60/00:a0:c0:2b:61/04:00:04:00:00/40 tag 20 ncq 524288 in
[  284.114981]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114985] ata1.00: status: { DRDY }
[  284.114987] ata1.00: failed command: READ FPDMA QUEUED
[  284.114993] ata1.00: cmd 60/90:b0:40:18:61/00:00:04:00:00/40 tag 22 ncq 73728 in
[  284.114993]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.114996] ata1.00: status: { DRDY }
[  284.115002] ata1.00: failed command: READ FPDMA QUEUED
[  284.115005] ata1.00: cmd 60/b8:b8:98:08:61/01:00:04:00:00/40 tag 23 ncq 225280 in
[  284.115005]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.115007] ata1.00: status: { DRDY }
[  284.115009] ata1.00: failed command: READ FPDMA QUEUED
[  284.115012] ata1.00: cmd 60/00:d0:38:0b:61/01:00:04:00:00/40 tag 26 ncq 131072 in
[  284.115012]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.115014] ata1.00: status: { DRDY }
[  284.115016] ata1.00: failed command: READ FPDMA QUEUED
[  284.115019] ata1.00: cmd 60/00:d8:10:1a:61/01:00:04:00:00/40 tag 27 ncq 131072 in
[  284.115019]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.115021] ata1.00: status: { DRDY }
[  284.115023] ata1.00: failed command: READ FPDMA QUEUED
[  284.115027] ata1.00: cmd 60/18:e0:c0:2f:61/03:00:04:00:00/40 tag 28 ncq 405504 in
[  284.115027]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.115028] ata1.00: status: { DRDY }
[  284.115030] ata1.00: failed command: READ FPDMA QUEUED
[  284.115034] ata1.00: cmd 60/00:f0:b8:ba:60/01:00:04:00:00/40 tag 30 ncq 131072 in
[  284.115034]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  284.115036] ata1.00: status: { DRDY }
[  284.115040] ata1: hard resetting link
[  284.435111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  284.439957] ata1.00: configured for UDMA/133
[  284.439965] ata1.00: device reported invalid CHS sector 0
[  284.439968] ata1.00: device reported invalid CHS sector 0
[  284.439970] ata1.00: device reported invalid CHS sector 0
[  284.439972] ata1.00: device reported invalid CHS sector 0
[  284.439975] ata1.00: device reported invalid CHS sector 0
[  284.439977] ata1.00: device reported invalid CHS sector 0
[  284.439979] ata1.00: device reported invalid CHS sector 0
[  284.439981] ata1.00: device reported invalid CHS sector 0
[  284.439984] ata1.00: device reported invalid CHS sector 0
[  284.439986] ata1.00: device reported invalid CHS sector 0
[  284.439988] ata1.00: device reported invalid CHS sector 0
[  284.439997] sd 0:0:0:0: [sda] Unhandled error code
[  284.440000] sd 0:0:0:0: [sda]  
[  284.440002] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440005] sd 0:0:0:0: [sda] CDB: 
[  284.440006] Read(10): 28 00 04 59 f2 00 00 01 90 00
[  284.440016] end_request: I/O error, dev sda, sector 73003520
[  284.440037] sd 0:0:0:0: [sda] Unhandled error code
[  284.440040] sd 0:0:0:0: [sda]  
[  284.440042] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440044] sd 0:0:0:0: [sda] CDB: 
[  284.440046] Read(10): 28 00 04 5e ec e0 00 01 00 00
[  284.440054] end_request: I/O error, dev sda, sector 73329888
[  284.440068] sd 0:0:0:0: [sda] Unhandled error code
[  284.440071] sd 0:0:0:0: [sda]  
[  284.440072] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440074] sd 0:0:0:0: [sda] CDB: 
[  284.440076] Read(10): 28 00 04 60 b2 38 00 01 00 00
[  284.440084] end_request: I/O error, dev sda, sector 73445944
[  284.440098] sd 0:0:0:0: [sda] Unhandled error code
[  284.440100] sd 0:0:0:0: [sda]  
[  284.440101] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440102] sd 0:0:0:0: [sda] CDB: 
[  284.440103] Read(10): 28 00 04 60 b5 90 00 01 00 00
[  284.440107] end_request: I/O error, dev sda, sector 73446800
[  284.440114] sd 0:0:0:0: [sda] Unhandled error code
[  284.440115] sd 0:0:0:0: [sda]  
[  284.440116] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440118] sd 0:0:0:0: [sda] CDB: 
[  284.440118] Read(10): 28 00 04 60 d1 28 00 01 b8 00
[  284.440123] end_request: I/O error, dev sda, sector 73453864
[  284.440131] sd 0:0:0:0: [sda] Unhandled error code
[  284.440132] sd 0:0:0:0: [sda]  
[  284.440133] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440135] sd 0:0:0:0: [sda] CDB: 
[  284.440135] Read(10): 28 00 04 60 d6 18 00 01 00 00
[  284.440140] end_request: I/O error, dev sda, sector 73455128
[  284.440146] sd 0:0:0:0: [sda] Unhandled error code
[  284.440148] sd 0:0:0:0: [sda]  
[  284.440149] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440150] sd 0:0:0:0: [sda] CDB: 
[  284.440151] Read(10): 28 00 04 60 dc d8 00 04 00 00
[  284.440155] end_request: I/O error, dev sda, sector 73456856
[  284.440166] sd 0:0:0:0: [sda] Unhandled error code
[  284.440167] sd 0:0:0:0: [sda]  
[  284.440168] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440169] sd 0:0:0:0: [sda] CDB: 
[  284.440170] Read(10): 28 00 04 60 e0 d8 00 00 20 00
[  284.440175] end_request: I/O error, dev sda, sector 73457880
[  284.440179] sd 0:0:0:0: [sda] Unhandled error code
[  284.440180] sd 0:0:0:0: [sda]  
[  284.440181] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[  284.440183] sd 0:0:0:0: [sda] CDB: 
[  284.440183] Read(10): 28 00 04 60 eb 00 00 01 00 00
[  284.440188] end_request: I/O error, dev sda, sector 73460480
[  284.440199] ata1: EH complete
[  286.337814] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  286.383062] systemd-udevd[385]: starting version 204
[  286.459536] lp: driver loaded but no devices found
[  286.464703] ppdev: user-space parallel port driver
[  286.535700] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[  286.543608] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[  286.543639] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[  286.543663] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[  286.543711] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[  286.556702] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  286.556712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  286.556714] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  286.556719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  286.556721] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20131115/utaddress-251)
[  286.556725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  286.556727] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  286.565617] bcma: bus0: Bus registered
[  286.585109] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[  286.598856] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[  286.603536] Bluetooth: Core ver 2.17
[  286.603568] NET: Registered protocol family 31
[  286.603571] Bluetooth: HCI device and connection manager initialized
[  286.603582] Bluetooth: HCI socket layer initialized
[  286.603585] Bluetooth: L2CAP socket layer initialized
[  286.603626] Bluetooth: SCO socket layer initialized
[  286.611521] usbcore: registered new interface driver btusb
[  286.676268] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[  286.686555] device-mapper: multipath: version 1.6.0 loaded
[  286.718406] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  286.719611] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  286.732628] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[  286.732633]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  286.732635]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[  286.732637]    mono: mono_out=0x0
[  286.732638]    inputs:
[  286.732641]      Internal Mic=0xc
[  286.732643]      Mic=0xa
[  286.750842] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[  286.751257] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[  286.751346] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  286.801451] input: Dell WMI hotkeys as /devices/virtual/input/input17
[  286.824652] cfg80211: Calling CRDA to update world regulatory domain
[  286.847112] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[  286.847122] b43: probe of bcma0:0 failed with error -524
[  286.847150] Broadcom 43xx driver loaded [ Features: PNL ]
[  286.857379] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[  286.864820] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  286.865186] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[  310.320863] usb 2-1.3: USB disconnect, device number 9
[  311.799098] usb 2-1.3: new low-speed USB device number 10 using ehci-pci
[  311.895880] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  311.895888] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  311.895894] usb 2-1.3: Product: Optical Mouse
[  311.895898] usb 2-1.3: Manufacturer: Genius
[  311.899781] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18
[  311.899976] hid-generic 0003:0458:003A.0006: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  317.090111] ata1.00: exception Emask 0x0 SAct 0x1000000 SErr 0x0 action 0x6 frozen
[  317.090119] ata1.00: failed command: WRITE FPDMA QUEUED
[  317.090127] ata1.00: cmd 61/08:c0:00:68:90/00:00:11:00:00/40 tag 24 ncq 4096 out
[  317.090127]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  317.090130] ata1.00: status: { DRDY }
[  317.090136] ata1: hard resetting link
[  317.692664] systemd-udevd[425]: timeout 'udisks-part-id /dev/loop0'
[  317.711166] systemd-udevd[411]: timeout 'udisks-part-id /dev/loop4'
[  317.868948] systemd-udevd[422]: timeout: killing '/usr/sbin/alsactl -E HOME=/var/run/alsa restore 0' [544]
[  317.869272] systemd-udevd[422]: '/usr/sbin/alsactl -E HOME=/var/run/alsa restore 0' [544] terminated by signal 9 (Killed)
[  317.885229] systemd-udevd[421]: timeout: killing '/sbin/crda' [547]
[  317.885555] systemd-udevd[421]: '/sbin/crda' [547] terminated by signal 9 (Killed)
[  318.609790] Linux video capture interface: v2.00
[  318.612543] usbcore: registered new interface driver snd-usb-audio
[  318.619250] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:643d)
[  318.633579] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input19
[  318.633669] usbcore: registered new interface driver uvcvideo
[  318.633671] USB Video Class driver (1.1.1)
[  318.694294] systemd-udevd[425]: timeout: killing 'udisks-part-id /dev/loop0' [464]
[  318.694423] systemd-udevd[425]: 'udisks-part-id /dev/loop0' [464] terminated by signal 9 (Killed)
[  318.712803] systemd-udevd[411]: timeout: killing 'udisks-part-id /dev/loop4' [471]
[  318.712901] systemd-udevd[411]: 'udisks-part-id /dev/loop4' [471] terminated by signal 9 (Killed)
[  322.453178] ata1: link is slow to respond, please be patient (ready=0)
[  327.103808] ata1: COMRESET failed (errno=-16)
[  327.103820] ata1: hard resetting link
[  332.466937] ata1: link is slow to respond, please be patient (ready=0)
[  337.117634] ata1: COMRESET failed (errno=-16)
[  337.117642] ata1: hard resetting link
[  342.480736] ata1: link is slow to respond, please be patient (ready=0)
[  372.052686] usb 2-1.3: USB disconnect, device number 10
[  372.185946] ata1: COMRESET failed (errno=-16)
[  372.185960] ata1: limiting SATA link speed to 1.5 Gbps
[  372.185965] ata1: hard resetting link
[  373.530923] usb 2-1.3: new low-speed USB device number 11 using ehci-pci
[  373.627108] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[  373.627117] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  373.627122] usb 2-1.3: Product: Optical Mouse
[  373.627126] usb 2-1.3: Manufacturer: Genius
[  373.631239] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input20
[  373.631499] hid-generic 0003:0458:003A.0007: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[  374.635429] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  374.650718] ata1.00: configured for UDMA/133
[  374.650726] ata1.00: device reported invalid CHS sector 0
[  374.650737] ata1: EH complete
[  374.691420] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[  374.912152] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  375.267497] init: failsafe main process (725) killed by TERM signal
[  375.630005] init: cups main process (801) killed by HUP signal
[  375.630017] init: cups main process ended, respawning
[  375.842497] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  375.842501] Bluetooth: BNEP filters: protocol multicast
[  375.842513] Bluetooth: BNEP socket layer initialized
[  375.844025] Bluetooth: RFCOMM TTY layer initialized
[  375.844039] Bluetooth: RFCOMM socket layer initialized
[  375.844047] Bluetooth: RFCOMM ver 1.11
[  376.780140] init: samba-ad-dc main process (872) terminated with status 1
[  377.156018] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  377.156030] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[  377.156175] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  377.156486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  377.388012] r8169 0000:13:00.0 eth0: link down
[  377.388032] r8169 0000:13:00.0 eth0: link down
[  377.388069] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  377.388530] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  378.835440] init: plymouth-upstart-bridge main process ended, respawning
[  378.844552] init: plymouth-upstart-bridge main process (1350) terminated with status 1
[  378.844568] init: plymouth-upstart-bridge main process ended, respawning
[  378.958840] r8169 0000:13:00.0 eth0: link up
[  378.958856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

-- 11 sty 2015 10:50 --

Tak jak przepuszczałem wina leżała po stronie dysku, coś fizycznie z nim było nie tak.
Zmieniłem na SSHD i wszystko gra, system podnosi się w ciągu 8 sekund za każdym razem.