Nie wykrywa sieci wi-fi, 14.04, Atheros AR9285, DELL Inspiron n5030

[phyrz]

Witam,

Wszystko śmigało pięknie dopóki przypadkowo nie nacisnąłem przycisku rozłączającego wi-fi(f2), od tej pory próby ponownego załączania wi-fi nie przynoszą skutku, wcześniej wyłączanie/włącznie sieci bezprzewodowej za pomocą f2 działało znakomicie..wydaje mi się, że system nie rozpoznaje karty( na live cd też nie wykrywa), dodaje kilka pomocnych poleceń do analizy...mam tylko nadzieję, że karta nie padła..

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0c45:6422 Microdia 
Bus 001 Device 002: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at efe8 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f60 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f80 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at 6fa0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f6afc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f0000000-f01fffff
        Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f6900000-f69fffff
        Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f6800000-f68fffff
        Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: f0800000-f09fffff
        Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f20 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at 6f40 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 45
        Region 0: I/O ports at 6e70 [size=8]
        Region 1: I/O ports at 6e78 [size=4]
        Region 2: I/O ports at 6e80 [size=8]
        Region 3: I/O ports at 6e88 [size=4]
        Region 4: I/O ports at 6ea0 [size=32]
        Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 4
        Region 0: Memory at f6afbf00 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1100 [size=32]

09:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
        Subsystem: Dell Device [1028:04a6]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at f68c0000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at df00 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c

0c:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
        Subsystem: Wistron NeWeb Corp. DNXA-95 802.11bgn Wireless Half-size Mini PCIe Card [185f:30af]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at f69f0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr f0:4d:a2:ab:fc:0a  
          inet addr:192.168.1.10  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::f24d:a2ff:feab:fc0a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3471 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2888 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000 
          RX bytes:1755575 (1.7 MB)  TX bytes:688410 (688.4 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:172 errors:0 dropped:0 overruns:0 frame:0
          TX packets:172 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:23522 (23.5 KB)  TX bytes:23522 (23.5 KB)

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ sudo ifconfig wlan0 up
[sudo] password for damian: 
wlan0: ERROR while getting interface flags: Nie ma takiego urządzenia
damian@damian-Inspiron-N5030:~$ 

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lshw -c network
WARNING: you should run this program as super-user.
  *-network UNCLAIMED     
       description: Network controller
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:0c:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: cap_list
       configuration: latency=0
       resources: memory:f69f0000-f69fffff
  *-network
       description: Ethernet interface
       product: AR8152 v2.0 Fast Ethernet
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:09:00.0
       logical name: eth0
       version: c1
       serial: f0:4d:a2:ab:fc:0a
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI duplex=full ip=192.168.1.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:47 memory:f68c0000-f68fffff ioport:df00(size=128)
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lspci -nn | grep 0280
0c:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
damian@damian-Inspiron-N

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lsmod | grep iwl
iwlwifi               169932  0 
cfg80211              484040  4 ath,iwlwifi,ath9k,mac80211

W razie jakichkolwiek pytań  służę pomocą, z góry dzięki.

[mateczek]

Masz załadowany moduł ath9k??
sprawdzisz poleceniem

Kod: Zaznacz cały

sudo lsmod

daj wynik polecenia

Kod: Zaznacz cały

sudo rfkill list

[phyrz]

Dzięki za szybką odpowiedź.

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ sudo lsmod
[sudo] password for damian: 
Module                  Size  Used by
nls_iso8859_1          12713  1 
bnep                   19624  2 
rfcomm                 69160  0 
bluetooth             391136  10 bnep,rfcomm
uvcvideo               80885  0 
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
snd_hda_codec_realtek    65580  1 
videobuf2_core         40664  1 uvcvideo
videodev              134688  2 uvcvideo,videobuf2_core
snd_hda_intel          56451  6 
snd_hda_codec         192906  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
gpio_ich               13476  0 
snd_pcm               102099  2 snd_hda_codec,snd_hda_intel
dell_wmi               12761  0 
sparse_keymap          13948  1 dell_wmi
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
ath9k                 164164  0 
dell_laptop            18168  0 
ath9k_common           13551  1 ath9k
snd_seq_midi           13324  0 
ath9k_hw              453856  2 ath9k_common,ath9k
snd_seq_midi_event     14899  1 snd_seq_midi
dcdbas                 14928  1 dell_laptop
ath                    28698  3 ath9k_common,ath9k,ath9k_hw
mac80211              630653  1 ath9k
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
joydev                 17381  0 
snd_timer              29482  2 snd_pcm,snd_seq
coretemp               13435  0 
serio_raw              13462  0 
lpc_ich                21080  0 
snd                    69322  22 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
mac_hid                13205  0 
parport_pc             32701  0 
ppdev                  17671  0 
iwlwifi               169932  0 
cfg80211              484040  4 ath,iwlwifi,ath9k,mac80211
lp                     17759  0 
parport                42348  3 lp,ppdev,parport_pc
hid_generic            12548  0 
usbhid                 52570  0 
hid                   106148  2 hid_generic,usbhid
ums_realtek            18029  0 
usb_storage            62209  2 ums_realtek
i915                  783805  4 
psmouse               106678  0 
ahci                   25819  3 
libahci                32716  1 ahci
atl1c                  46086  0 
i2c_algo_bit           13413  1 i915
drm_kms_helper         53081  1 i915
drm                   303102  5 i915,drm_kms_helper
video                  19476  1 i915
wmi                    19177  1 dell_wmi

Drugie polecenie nie wypluwa nic..

[mateczek]

daj

Kod: Zaznacz cały

sudo rmmod ath9k

potem załaduj moduł ponownie poleceniem

Kod: Zaznacz cały

sudo modprobe ath9k

i podaj wynik

Kod: Zaznacz cały

 dmesg 

Na końcu będą logi z jądra odnośnie ładowania sterownika
a z tym rfkill to to powinno być

Kod: Zaznacz cały

sudo rfkill list all

[phyrz]

Końcówka dmesg

Kod: Zaznacz cały

[ 3951.669435] ath9k: ath9k: Driver unloaded
[ 3965.520844] ath: phy1: Couldn't reset chip
[ 3965.520850] ath: phy1: Unable to initialize hardware; initialization status: -5
[ 3965.520855] ath9k 0000:0c:00.0: Failed to initialize device
[ 3965.520985] ath9k: probe of 0000:0c:00.0 failed with error -5
[ 4056.030665] ath9k: ath9k: Driver unloaded
[ 4067.239252] ath: phy2: Couldn't reset chip
[ 4067.239258] ath: phy2: Unable to initialize hardware; initialization status: -5
[ 4067.239264] ath9k 0000:0c:00.0: Failed to initialize device
[ 4067.239396] ath9k: probe of 0000:0c:00.0 failed with error -5
damian@damian-Inspiron-N5030:~$ sudo rfkill list all
damian@damian-Inspiron-N5030:~$ 

[bear7]

Pokaż wyniki poniższych poleceń:

Kod: Zaznacz cały

nm-tool

Kod: Zaznacz cały

rfkill list all

Kod: Zaznacz cały

uname -a

Masz dostęp do nośnika instalacyjnego Ubuntu? Jak tak, to uruchom system z nośnika instalacyjnego w trybie "wypróbuj Ubuntu" i sprawdź, czy karta działa.

Czy oprócz Ubuntu, masz może inny system (z naciskiem na Windows) na tym komputerze?

[phyrz]

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ nm-tool

NetworkManager Tool

State: disconnected

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            atl1c
  State:             unavailable
  Default:           no
  HW Address:        F0:4D:A2:AB:FC:0A

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ uname -a
Linux damian-Inspiron-N5030 3.13.0-36-generic #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

Tak jak pisałem, po włożeniu płyty live-cd Kubuntu karty nie wykrywa, te same objawy, do Windowsa dostępu nie mam.

[bear7]

Klepnij w terminalu poniższe polecenia:

Kod: Zaznacz cały

echo "options ath9k nohwcrypt=1" | sudo tee -a /etc/modprobe.d/ath9k.conf

Kod: Zaznacz cały

sudo dmesg -C

Następnie, klepnij poniższe polecenia i pokaż ich rezultaty:

Kod: Zaznacz cały

sudo modprobe -rfv ath9k

Kod: Zaznacz cały

sudo modprobe -v ath9k

Kod: Zaznacz cały

dmesg

Kod: Zaznacz cały

lshw -C network

[phyrz]

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ sudo modprobe -rfv ath9k
rmmod ath9k
rmmod mac80211
rmmod ath9k_common
rmmod ath9k_hw
rmmod ath

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ sudo modprobe -v ath9k
insmod /lib/modules/3.13.0-36-generic/kernel/net/mac80211/mac80211.ko 
insmod /lib/modules/3.13.0-36-generic/kernel/drivers/net/wireless/ath/ath.ko 
insmod /lib/modules/3.13.0-36-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko 
insmod /lib/modules/3.13.0-36-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko 
insmod /lib/modules/3.13.0-36-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko nohwcrypt=1 nohwcrypt=1 nohwcrypt=1 

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ dmesg
[  221.215757] ath9k: ath9k: Driver unloaded
[  230.437210] ath: phy1: Couldn't reset chip
[  230.437217] ath: phy1: Unable to initialize hardware; initialization status: -5
[  230.437221] ath9k 0000:0c:00.0: Failed to initialize device
[  230.437354] ath9k: probe of 0000:0c:00.0 failed with error -5

Kod: Zaznacz cały

damian@damian-Inspiron-N5030:~$ lshw -C network
WARNING: you should run this program as super-user.
  *-network UNCLAIMED     
       description: Network controller
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:0c:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: cap_list
       configuration: latency=0
       resources: memory:f69f0000-f69fffff
  *-network
       description: Ethernet interface
       product: AR8152 v2.0 Fast Ethernet
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:09:00.0
       logical name: eth0
       version: c1
       serial: f0:4d:a2:ab:fc:0a
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair
       resources: irq:47 memory:f68c0000-f68fffff ioport:df00(size=128)
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@2:4
       logical name: wlan1
       serial: 00:e0:4c:1c:df:b2
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=r8188eu ip=192.168.1.10 multicast=yes wireless=IEEE 802.11bgn
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
damian@damian-Inspiron-N5030:~$ 

Wlan1 to bezprzewodówka po usb.