Do rzeczy:
Urządzenie mi normalnie wykrywa
Kod: Zaznacz cały
lukas60055@lukas60055-hp-t5740:~$ lsusb
Bus 002 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 002 Device 002: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 022: ID 04b4:0060 Cypress Semiconductor Corp. Wireless optical mouse
Bus 001 Device 016: ID 04e8:6863 Samsung Electronics Co., Ltd GT-I9500 [Galaxy S4] / GT-I9250 [Galaxy Nexus] (network tethering)
Bus 001 Device 021: ID 19d2:1515 ZTE WCDMA Technologies MSM
Bus 001 Device 008: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 007: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Kod: Zaznacz cały
crwxrwxrwx 1 root dialout 166, 0 maj 11 16:39 /dev/ttyACM0
crwxrwxrwx 1 root dialout 166, 1 maj 11 16:35 /dev/ttyACM1
crwxrwxrwx 1 root dialout 166, 2 maj 11 16:36 /dev/ttyACM2
Kod: Zaznacz cały
lukas60055@lukas60055-hp-t5740:~$ wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 S8
Modem Port Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16
Modem Port Scan<*1>: S17 S18 S19 S20 S21 S22 S23 S24
Modem Port Scan<*1>: S25 S26 S27 S28 S29 S30 S31
ttyACM0<Info>: Device or resource busy
Modem Port Scan<*1>: ACM0
ttyACM1<Info>: Device or resource busy
Modem Port Scan<*1>: ACM1
WvModem<*1>: Cannot set information for serial port.
ttyACM2<*1>: ATQ0 V1 E1 -- ERROR
ttyACM2<*1>: failed with 2400 baud, next try: 9600 baud
ttyACM2<*1>: ATQ0 V1 E1 -- ERROR
ttyACM2<*1>: failed with 9600 baud, next try: 115200 baud
ttyACM2<*1>: ATQ0 V1 E1 -- ERROR
ttyACM2<*1>: and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
Proszę o pomoc z góry dziękuje!