Kernele testowe/stabilne wersja v21.x - atom oraz K8

[e X t 7 3]

Wygląda to na jakiś bąłd ehci_hcd, albo uhci_hcd. Być może konflikt. Zamienię tu ustawienia pod v22.1 = inaczej niż to realizują kernele Canonical. Przyjąłem tu ich standard aby nie było zgrzytów, co do ładowania modułów, ale podejrzewam jakiś konflikt ehci [usb 2.x] vs uhci [ten ostatni to odpowiednik ohci = usb 1.1 na Intelach i VIA]. Zobaczymy.

Pozdrawiam

[snp88]

ok to czekam na poprawke pozdrawiam;)

kawałek dmesg

Kod: Zaznacz cały

usb 2-6: new high-speed USB device number 2 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 4-2: new full-speed USB device number 2 using uhci_hcd
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 4 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
uvesafb: Getting VBE info block failed (eax=0xd0cf, err=0)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
EXT4-fs (sda8): INFO: recovery required on readonly filesystem
EXT4-fs (sda8): write access will be enabled during recovery
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 6 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 7 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6

a tu całość
http://paste.ubuntu.com/1577971/

[Chris_user]

Panie eXt73 headers nie buduje sie z fglrx 13.1

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4870]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870]
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:01.0 Network controller: Ralink corp. RT2561/RT61 802.11g PCI

Kod: Zaznacz cały

Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.6.11-ext73-f1-21.6-k8-ags-cfs /boot/vmlinuz-3.6.11-ext73-f1-21.6-k8-ags-cfs
Error! Bad return status for module build on kernel: 3.6.11-ext73-f1-21.6-k8-ags-cfs (i686)
Consult /var/lib/dkms/fglrx/8.97.100.7/build/make.log for more information.

make.log

Kod: Zaznacz cały

DKMS make.log for fglrx-8.97.100.7 for kernel 3.6.11-ext73-f1-21.6-k8-ags-cfs (i686)
śro, 13 lut 2013, 23:16:16 CET
AMD kernel module generator version 2.1
make.sh: 390: [: =: unexpected operator
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.6.11-ext73-f1-21.6-k8-ags-cfs/build SUBDIRS=/var/lib/dkms/fglrx/8.97.100.7/build$
make[1]: Wejście do katalogu `/usr/src/linux-headers-3.6.11-ext73-f1-21.6-k8-ags-cfs'
  CC [M]  /var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.o
/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterva$
/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.c:2152:5: error: implicit declaration of funct$
cc1: some warnings being treated as errors
make[2]: *** [/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.o] Błąd 1
make[1]: *** [_module_/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-headers-3.6.11-ext73-f1-21.6-k8-ags-cfs'
make: *** [kmod_build] Błąd 2
build failed with return value 2

Na jakiej wersji Pan testował fglrx z tym kernelem? Skrypt mowi ze nie ma sterownikow dla mojego systemu

[e X t 7 3]

ok to czekam na poprawke pozdrawiam;)

kawałek dmesg

Kod: Zaznacz cały

usb 2-6: new high-speed USB device number 2 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 4-2: new full-speed USB device number 2 using uhci_hcd
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 4 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
uvesafb: Getting VBE info block failed (eax=0xd0cf, err=0)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
EXT4-fs (sda8): INFO: recovery required on readonly filesystem
EXT4-fs (sda8): write access will be enabled during recovery
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 6 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6
usb 2-6: new high-speed USB device number 7 using ehci_hcd
hub 2-0:1.0: unable to enumerate USB device on port 6

a tu całość
http://paste.ubuntu.com/1577971/

No tak pod kernelem v21.6 tak może być ... zmiany i poprawki wprowadzone w v22.1 - w zasadzie teraz po uploadzie nowej wersji v22.1 mogę uznać, że on jest stabilny.

Pozdrawiam

-- 14 lut 2013 10:06 --

Panie eXt73 headers nie buduje sie z fglrx 13.1

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4870]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870]
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:01.0 Network controller: Ralink corp. RT2561/RT61 802.11g PCI

Kod: Zaznacz cały

Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.6.11-ext73-f1-21.6-k8-ags-cfs /boot/vmlinuz-3.6.11-ext73-f1-21.6-k8-ags-cfs
Error! Bad return status for module build on kernel: 3.6.11-ext73-f1-21.6-k8-ags-cfs (i686)
Consult /var/lib/dkms/fglrx/8.97.100.7/build/make.log for more information.

make.log

Kod: Zaznacz cały

DKMS make.log for fglrx-8.97.100.7 for kernel 3.6.11-ext73-f1-21.6-k8-ags-cfs (i686)
śro, 13 lut 2013, 23:16:16 CET
AMD kernel module generator version 2.1
make.sh: 390: [: =: unexpected operator
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.6.11-ext73-f1-21.6-k8-ags-cfs/build SUBDIRS=/var/lib/dkms/fglrx/8.97.100.7/build$
make[1]: Wejście do katalogu `/usr/src/linux-headers-3.6.11-ext73-f1-21.6-k8-ags-cfs'
  CC [M]  /var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.o
/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterva$
/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.c:2152:5: error: implicit declaration of funct$
cc1: some warnings being treated as errors
make[2]: *** [/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x/firegl_public.o] Błąd 1
make[1]: *** [_module_/var/lib/dkms/fglrx/8.97.100.7/build/2.6.x] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-headers-3.6.11-ext73-f1-21.6-k8-ags-cfs'
make: *** [kmod_build] Błąd 2
build failed with return value 2

Na jakiej wersji Pan testował fglrx z tym kernelem? Skrypt mowi ze nie ma sterownikow dla mojego systemu

Zatem tak minimalna wersja sterownika catalyst to 12.11 beta. Na ten moment nie udostępniałem sterowników 13.1 dla architektury x86 - ale zbuduje takie.

Zresztą z wysoka doza prawdopodobieństwa mogę stwierdzi, że od kerneli v24.x, a zatem opartych na Linux-3.9.x, będę jedynie zapewniał wsparcie dla architektury x86_64 - zarówno dotyczy to kerneli, jak i sterowników.

Pozdrawiam

[Chris_user]

Już sobie poradziłem zapomniałem ze ich sterownik działa z kernelem do wersji 3.4

Kod: Zaznacz cały

fglrx, 8.97.100.7, 3.6.11-ext73-f1-21.6-k8-ags-cfs, i686: installed

glxgears z compizem

Kod: Zaznacz cały

27101 frames in 5.0 seconds = 5416.095 FPS
27137 frames in 5.0 seconds = 5427.261 FPS
26688 frames in 5.0 seconds = 5335.564 FPS
26859 frames in 5.0 seconds = 5371.678 FPS
27018 frames in 5.0 seconds = 5403.495 FPS
26916 frames in 5.0 seconds = 5383.039 FPS
26911 frames in 5.0 seconds = 5382.071 FPS
27097 frames in 5.0 seconds = 5419.289 FPS
26912 frames in 5.0 seconds = 5382.389 FPS
27283 frames in 5.0 seconds = 5456.531 FPS

Jak by ktoś chciał do innych systemów to mogę udostępnić source Niestety paczek dla debiana nie da się zrobić Sterownik jest do kart HD 4000, HD 3000 and HD 2000 Series i kernel do 3.8

Edit:
O ile dobrze pamiętam na wersji bodajże 12.4 miałem ponad 45000 ech

Pozdrawiam

[e X t 7 3]

Nie masz Pan włączonego jakiegoś VSync ? .

Pozdrawiam

[Chris_user]

Chyba nie

Kod: Zaznacz cały

acct                    on
acpid                   on
alsa-utils              on
anacron                 on
apache2                 on
atd                     on
avahi-daemon            on
binfmt-support          on
bluetooth               on
bootlogd                on
bootlogs                on
bootmisc.sh             on
checkfs.sh              on
checkroot-bootclean.sh  on
checkroot.sh            on
console-setup           on
cron                    on
cups                    on
dbus                    on
decnet                  on
exim4                   on
firewall                on
fuse                    on
gdm3                    on
hdparm                  on
hostname.sh             on
hwclock.sh              on
jetty                   on
kbd                     on
keyboard-setup          on
killprocs               on
kmod                    on
lm-sensors              on
motd                    on
mountall-bootclean.sh   on
mountall.sh             on
mountdevsubfs.sh        on
mountkernfs.sh          on
mountnfs-bootclean.sh   on
mountnfs.sh             on
mtab.sh                 on
network-manager         on
networking              on
ntp                     on
portmap                 on
postgresql              on
pppd-dns                on
procps                  on
pulseaudio              on
pyload                  off
rc.local                on
rcS                     off
rmnologin               on
rsync                   on
rsyslog                 on
saned                   on
screen-cleanup          on
scsitools-pre.sh        on
scsitools.sh            on
sendsigs                off
smartd                  off
smartmontools           on
stop-bootlogd           on
stop-bootlogd-single    on
sudo                    on
udev                    on
udev-mtab               on
umountfs                off
umountnfs.sh            off
umountroot              off
unattended-upgrades     off
urandom                 on
x11-common              on

Już wiem, bez compiza tyle mi idzie heh

Kod: Zaznacz cały

44804 frames in 5.0 seconds = 8960.701 FPS
44938 frames in 5.0 seconds = 8987.435 FPS
44910 frames in 5.0 seconds = 8981.830 FPS
45175 frames in 5.0 seconds = 9034.995 FPS
44969 frames in 5.0 seconds = 8993.644 FPS
45021 frames in 5.0 seconds = 9004.083 FPS
45162 frames in 5.0 seconds = 9032.380 FPS

A tu taka mała ciekawostka

gnome3

Kod: Zaznacz cały

29170 frames in 5.0 seconds = 5833.948 FPS
31137 frames in 5.0 seconds = 6227.208 FPS
31192 frames in 5.0 seconds = 6238.296 FPS
31439 frames in 5.0 seconds = 6287.799 FPS
30863 frames in 5.0 seconds = 6172.598 FPS
31272 frames in 5.0 seconds = 6254.344 FPS
31497 frames in 5.0 seconds = 6299.243 FPS
31441 frames in 5.0 seconds = 6288.034 FPS
31461 frames in 5.0 seconds = 6292.055 FPS

gnome classic

Kod: Zaznacz cały

44100 frames in 5.0 seconds = 8819.908 FPS
45314 frames in 5.0 seconds = 9062.782 FPS
45297 frames in 5.0 seconds = 9059.306 FPS
45327 frames in 5.0 seconds = 9065.393 FPS
45748 frames in 5.0 seconds = 9149.545 FPS
45752 frames in 5.0 seconds = 9150.281 FPS
45754 frames in 5.0 seconds = 9150.751 FPS
45716 frames in 5.0 seconds = 9143.197 FPS
45730 frames in 5.0 seconds = 9145.883 FPS
45768 frames in 5.0 seconds = 9153.512 FPS

Pozdrawiam