Kopiowanie danych z/do pendrive nie działa
: 15 maja 2010, 13:27
Coś pokombinowałem z montowaniem pendrivera i teraz nie mam uprawnień do kopiowania danych, poza tym montuje mi się podwójnie jako dysk "usb" i "kingston". Załączam logi:
Kod: Zaznacz cały
proc /proc proc defaults 0 0
UUID=35fec5bc-2b0f-4ffa-8755-00fcfb4182da / ext4 errors=remount-ro 0 1
UUID=3c074201-91b7-44ab-99d9-5b044a4c29ff none swap sw 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0Kod: Zaznacz cały
[ 3306.352040] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 3306.497610] scsi3 : usb-storage 1-4:1.0
[ 3307.512652] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.02 PQ: 0 ANSI: 0 CCS
[ 3307.515557] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3307.813741] sd 3:0:0:0: [sdb] 251904 512-byte logical blocks: (128 MB/123 MiB)
[ 3307.814225] sd 3:0:0:0: [sdb] Write Protect is off
[ 3307.814229] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3307.814233] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3307.817600] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3307.817609] sdb: sdb1
[ 3307.822230] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 3307.822238] sd 3:0:0:0: [sdb] Attached SCSI removable diskKod: Zaznacz cały
1-desktop usbmount[2824]: /dev/sdb does not contain a filesystem or disklabel
1-desktop usbmount[2854]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdb1 /media/usb0
1-desktop usbmount[2854]: executing command: run-parts /etc/usbmount/mount.d
1-desktop kernel: [ 3443.729223] usb 1-4: USB disconnect, address 3
1-desktop usbmount[2971]: executing command: umount -l /media/usb0
1-desktop usbmount[2971]: executing command: run-parts /etc/usbmount/umount.dKod: Zaznacz cały
Przed montowaniem:
/dev/sda1 / ext4 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
none /sys sysfs rw,noexec,nosuid,nodev 0 0
none /sys/fs/fuse/connections fusectl rw 0 0
none /sys/kernel/debug debugfs rw 0 0
none /sys/kernel/security securityfs rw 0 0
none /dev devtmpfs rw,mode=0755 0 0
none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0
none /dev/shm tmpfs rw,nosuid,nodev 0 0
none /var/run tmpfs rw,nosuid,mode=0755 0 0
none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0
none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
gvfs-fuse-daemon /home/krzysztof/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=krzysztof 0 0
Po zamontowaniu:
/dev/sda1 / ext4 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
none /sys sysfs rw,noexec,nosuid,nodev 0 0
none /sys/fs/fuse/connections fusectl rw 0 0
none /sys/kernel/debug debugfs rw 0 0
none /sys/kernel/security securityfs rw 0 0
none /dev devtmpfs rw,mode=0755 0 0
none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0
none /dev/shm tmpfs rw,nosuid,nodev 0 0
none /var/run tmpfs rw,nosuid,mode=0755 0 0
none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0
none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
gvfs-fuse-daemon /home/krzysztof/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=krzysztof 0 0
/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0