Ubuntu.pl 🇺🇦️ - Forum Ubuntu

Kod: Zaznacz cały

Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See doc/FAQ,
doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.

Kod: Zaznacz cały

aptitude install lm-sensors lm-sensors-source

Kod: Zaznacz cały

sensors-detect

Kod: Zaznacz cały

sensors

Kod: Zaznacz cały

it8718-isa-0290
Adapter: ISA adapter
in0:         +1.06 V  (min =  +0.00 V, max =  +4.08 V)   
in1:         +1.90 V  (min =  +0.00 V, max =  +4.08 V)   
in2:         +3.36 V  (min =  +0.00 V, max =  +4.08 V)   
in3:         +2.93 V  (min =  +0.00 V, max =  +4.08 V)   
in4:         +0.26 V  (min =  +0.00 V, max =  +4.08 V)   
in5:         +0.02 V  (min =  +0.00 V, max =  +4.08 V)   
in6:         +0.10 V  (min =  +0.00 V, max =  +4.08 V)   
in7:         +3.04 V  (min =  +0.00 V, max =  +4.08 V)   
in8:         +3.07 V
fan1:          0 RPM  (min =    0 RPM)
fan2:          0 RPM  (min =    0 RPM)
fan3:          0 RPM  (min =    0 RPM)
fan4:        995 RPM  (min =    0 RPM)
temp1:       +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = transistor
temp2:       +28.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode
temp3:        -2.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = transistor
cpu0_vid:   +2.050 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +34.0°C  (high = +78.0°C, crit = +100.0°C)  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +34.0°C  (high = +78.0°C, crit = +100.0°C)