[LUBUNTU 15.04] 8level WUSB-150n - brak połączenia WiFi po wstrzymaniu systemu

[4340]

Witajcie. Mam nadzieję, że ten dział jest odpowiedni. Temat dość znany: po zahibernowaniu bądź uśpieniu komputera i ponownym jego włączeniu - nie działa WiFi. Zakładam nowy wątek, ponieważ wszystkie jakie znalazłem są stare, albo dotyczą nieco innej sytuacji (brak startu usługi lub sterownika, a nie brak połączenia).

Przeczytałem już mnóstwo wątków na ten temat i nic nie zadziałało. Sprzętem, na którym występuje problem, jest Acer Travelmate 2410. Łączy się z siecią za pomocą karty na USB - 8level WUSB-150n opartej na chipsecie Realtek 8188CE. Sterownik rtl8192cu. Całość działa na systemie Lubuntu 15.04.

Dokładniej problem jest taki, że co bym nie zrobił po uśpieniu, to proces łączenia zatrzymuje się na żądaniu adresu. Połączenie z routerem jest (widać komputer w panelu routera - TP Link TP-WR1043ND).

Próbowałem zainstalować dołączony sterownik, resetować usługę network-services, zrobić skrypt w etc/pm/config.d z linijką "SUSPEND_MODULES="$SUSPEND_MODULES rtl8192cu"". Próbowałem także wyjąć i włożyć kartę, usunąć sieć i zalogować się od nowa, wyłączyć próbowanie uzyskania adresu IPv6. Niestety w każdym przypadku pomaga wyłącznie restart komputera. Równolegle jest zainstalowany Windows XP na którym połączenie poprawnie działa.

Jest jeszcze jakiś sposób, który może pomóc w tym przypadku? Będę wdzięczny za każdą wskazówkę. Pozdrawiam.

[wojtbar]

Witam.
Po wybudzeniu z uśpienia jak nie chce się połączyć w konsoli wpisz dmesg zobacz jakie wypluwa nłędy, potem musisz usunąć moduły : rtlwifi,rtl8192c-common,rtl_usb,mac80211,rtl8192cu poleceniem rmmod . Kolejność może być inna.Następnie poleceniem modprobe rtl8192cu uruchamiasz karte (mogą być problemy przy usuwaniu rtl_usb .Powinno działać.

[4340]

Wielkie dzięki. Zadziałało . Tutaj wynik dmesg (w tagach, bo długi):

Kod: Zaznacz cały

[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 17 pages/cpu @f6cb5000 s40320 r0 d29312 u69632
[    0.000000] pcpu-alloc: s40320 r0 d29312 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 388552
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-23-generic root=UUID=b5f771c5-97b1-46c0-8811-432714a75e33 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0005f6e0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1513972K/1563128K available (7117K kernel code, 710K rwdata, 3004K rodata, 888K init, 796K bss, 49156K reserved, 0K cma-reserved, 650120K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc1a97000 - 0xc1b75000   ( 888 kB)
      .data : 0xc16f37b6 - 0xc1a95800   (3720 kB)
      .text : 0xc1000000 - 0xc16f37b6   (7117 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f5436000 soft=f5438000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1496.481 MHz processor
[    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.96 BogoMIPS (lpj=5985924)
[    0.004028] pid_max: default: 32768 minimum: 301
[    0.004046] ACPI: Core revision 20141107
[    0.013433] ACPI: All ACPI Tables successfully acquired
[    0.014629] Security Framework initialized
[    0.014663] AppArmor: AppArmor initialized
[    0.014666] Yama: becoming mindful.
[    0.014776] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014780] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015207] Initializing cgroup subsys memory
[    0.015220] Initializing cgroup subsys devices
[    0.015227] Initializing cgroup subsys freezer
[    0.015233] Initializing cgroup subsys net_cls
[    0.015239] Initializing cgroup subsys blkio
[    0.015244] Initializing cgroup subsys perf_event
[    0.015250] Initializing cgroup subsys net_prio
[    0.015257] Initializing cgroup subsys hugetlb
[    0.015293] Disabled fast string operations
[    0.015305] mce: CPU supports 5 MCE banks
[    0.015319] CPU0: Thermal monitoring enabled (TM1)
[    0.015334] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.034220] ftrace: allocating 29381 entries in 58 pages
[    0.048182] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.091191] smpboot: CPU0: Intel(R) Celeron(R) M processor         1.50GHz (fam: 06, model: 0d, stepping: 08)
[    0.092000] Performance Events: p6 PMU driver.
[    0.092000] ... version:                0
[    0.092000] ... bit width:              32
[    0.092000] ... generic registers:      2
[    0.092000] ... value mask:             00000000ffffffff
[    0.092000] ... max period:             000000007fffffff
[    0.092000] ... fixed-purpose events:   0
[    0.092000] ... event mask:             0000000000000003
[    0.092000] x86: Booted up 1 node, 1 CPUs
[    0.092000] smpboot: Total of 1 processors activated (2992.96 BogoMIPS)
[    0.092000] devtmpfs: initialized
[    0.092000] evm: security.selinux
[    0.092000] evm: security.SMACK64
[    0.092000] evm: security.SMACK64EXEC
[    0.092000] evm: security.SMACK64TRANSMUTE
[    0.092000] evm: security.SMACK64MMAP
[    0.092000] evm: security.ima
[    0.092000] evm: security.capability
[    0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092000] PM: Registering ACPI NVS region [mem 0x5f6ea000-0x5f6fffff] (90112 bytes)
[    0.092000] pinctrl core: initialized pinctrl subsystem
[    0.092132] RTC time: 10:42:02, date: 07/26/15
[    0.092348] NET: Registered protocol family 16
[    0.092764] EISA bus registered
[    0.092771] cpuidle: using governor ladder
[    0.092776] cpuidle: using governor menu
[    0.092942] ACPI: bus type PCI registered
[    0.092947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.093095] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.093100] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.093103] PCI: Using MMCONFIG for extended config space
[    0.093105] PCI: Using configuration type 1 for base access
[    0.096752] ACPI: Added _OSI(Module Device)
[    0.096756] ACPI: Added _OSI(Processor Device)
[    0.096759] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096762] ACPI: Added _OSI(Processor Aggregator Device)
[    0.120042] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[    0.120183] ACPI: Interpreter enabled
[    0.120199] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.120208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.120232] ACPI: (supports S0 S3 S4 S5)
[    0.120235] ACPI: Using IOAPIC for interrupt routing
[    0.120283] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.198748] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.198760] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.198770] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.199716] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.199721] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.199725] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.199730] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.199734] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.199738] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.199743] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[    0.199747] PCI: root bus 00: using default resources
[    0.199974] PCI host bridge to bus 0000:00
[    0.199980] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.199984] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.199988] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.200012] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.200185] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[    0.200200] pci 0000:00:02.0: reg 0x10: [mem 0xb0080000-0xb00fffff]
[    0.200210] pci 0000:00:02.0: reg 0x14: [io  0x1800-0x1807]
[    0.200219] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.200228] pci 0000:00:02.0: reg 0x1c: [mem 0xb0000000-0xb003ffff]
[    0.200385] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[    0.200398] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x0007ffff]
[    0.200597] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.200659] pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
[    0.200775] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.200866] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.200928] pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
[    0.201039] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.201131] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.201193] pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
[    0.201307] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.201399] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.201461] pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
[    0.201571] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.201672] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.201700] pci 0000:00:1d.7: reg 0x10: [mem 0xb0040000-0xb00403ff]
[    0.201820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.201883] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.201978] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.202191] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.202216] pci 0000:00:1e.2: reg 0x10: [io  0x1c00-0x1cff]
[    0.202231] pci 0000:00:1e.2: reg 0x14: [io  0x18c0-0x18ff]
[    0.202246] pci 0000:00:1e.2: reg 0x18: [mem 0xb0040800-0xb00409ff]
[    0.202261] pci 0000:00:1e.2: reg 0x1c: [mem 0xb0040400-0xb00404ff]
[    0.202334] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.202475] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.202500] pci 0000:00:1e.3: reg 0x10: [io  0x2400-0x24ff]
[    0.202514] pci 0000:00:1e.3: reg 0x14: [io  0x2000-0x207f]
[    0.202610] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.202671] pci 0000:00:1e.3: System wakeup disabled by ACPI
[    0.202767] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.202887] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.202900] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI PM1a_EVT_BLK [io  0x1000-0x1003]
[    0.202909] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.202915] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
[    0.202921] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1200-120f
[    0.203052] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.203073] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.203088] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.203102] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.203117] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.203131] pci 0000:00:1f.1: reg 0x20: [io  0x1810-0x181f]
[    0.203160] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.203164] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.203168] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.203172] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.203310] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[    0.203389] pci 0000:00:1f.3: reg 0x20: [io  0x20a0-0x20bf]
[    0.203664] pci 0000:06:07.0: [10ec:8139] type 00 class 0x020000
[    0.203694] pci 0000:06:07.0: reg 0x10: [io  0x3000-0x30ff]
[    0.203711] pci 0000:06:07.0: reg 0x14: [mem 0xb0100000-0xb01000ff]
[    0.203827] pci 0000:06:07.0: supports D1 D2
[    0.203831] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.203867] pci 0000:06:07.0: System wakeup disabled by ACPI
[    0.203965] pci 0000:06:09.0: [1524:1410] type 02 class 0x060700
[    0.203995] pci 0000:06:09.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.204056] pci 0000:06:09.0: supports D1 D2
[    0.204060] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.204204] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.204212] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.204218] pci 0000:00:1e.0:   bridge window [mem 0xb0100000-0xb01fffff]
[    0.204229] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.204233] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.204239] pci 0000:06:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.204324] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
[    0.204332] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[    0.204337] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
[    0.204344] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
[    0.204351] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 0a
[    0.204363] pci_bus 0000:00: on NUMA node 0
[    0.204503] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[    0.204603] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    0.204699] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[    0.204795] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[    0.204890] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
[    0.204986] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    0.205081] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.205178] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[    0.220728] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.220824] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.221041] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.221045] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.221053] vgaarb: loaded
[    0.221056] vgaarb: bridge control possible 0000:00:02.0
[    0.221633] SCSI subsystem initialized
[    0.221721] libata version 3.00 loaded.
[    0.221782] ACPI: bus type USB registered
[    0.221830] usbcore: registered new interface driver usbfs
[    0.221857] usbcore: registered new interface driver hub
[    0.221887] usbcore: registered new device driver usb
[    0.222176] PCI: Using ACPI for IRQ routing
[    0.233101] PCI: pci_cache_line_size set to 64 bytes
[    0.233171] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.233176] e820: reserve RAM buffer [mem 0x5f6e0000-0x5fffffff]
[    0.233440] NetLabel: Initializing
[    0.233443] NetLabel:  domain hash size = 128
[    0.233445] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.233471] NetLabel:  unlabeled traffic allowed by default
[    0.233844] hpet clockevent registered
[    0.233849] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.233857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.233864] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.235981] Switched to clocksource hpet
[    0.249755] AppArmor: AppArmor Filesystem Enabled
[    0.249939] pnp: PnP ACPI init
[    0.264279] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.264287] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.264292] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.264297] system 00:00: [io  0x1200] has been reserved
[    0.264302] system 00:00: [io  0x1204] has been reserved
[    0.264308] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.264313] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.264318] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.264322] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.264334] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.264339] system 00:00: [mem 0xfec18000-0xfec180ff] has been reserved
[    0.264344] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.264352] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264467] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.264555] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.264622] pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[    0.264652] pnp: PnP ACPI: found 4 devices
[    0.264664] PnPBIOS: Disabled by ACPI PNP
[    0.303095] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.303112] pci 0000:00:02.1: BAR 0: assigned [mem 0x60000000-0x6007ffff]
[    0.303124] pci 0000:06:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.303129] pci 0000:06:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.303133] pci 0000:06:09.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.303137] pci 0000:06:09.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.303145] pci 0000:06:09.0: BAR 0: assigned [mem 0xb4000000-0xb4000fff]
[    0.303156] pci 0000:06:09.0: BAR 15: assigned [mem 0xb8000000-0xbbffffff pref]
[    0.303163] pci 0000:06:09.0: BAR 16: assigned [mem 0xbc000000-0xbfffffff]
[    0.303167] pci 0000:06:09.0: BAR 13: assigned [io  0x3400-0x34ff]
[    0.303172] pci 0000:06:09.0: BAR 14: assigned [io  0x3800-0x38ff]
[    0.303177] pci 0000:06:09.0: CardBus bridge to [bus 07-0a]
[    0.303181] pci 0000:06:09.0:   bridge window [io  0x3400-0x34ff]
[    0.303189] pci 0000:06:09.0:   bridge window [io  0x3800-0x38ff]
[    0.303196] pci 0000:06:09.0:   bridge window [mem 0xb8000000-0xbbffffff pref]
[    0.303204] pci 0000:06:09.0:   bridge window [mem 0xbc000000-0xbfffffff]
[    0.303212] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.303217] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.303226] pci 0000:00:1e.0:   bridge window [mem 0xb0100000-0xb01fffff]
[    0.303240] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.303244] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.303249] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.303253] pci_bus 0000:06: resource 1 [mem 0xb0100000-0xb01fffff]
[    0.303257] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.303261] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.303265] pci_bus 0000:07: resource 0 [io  0x3400-0x34ff]
[    0.303269] pci_bus 0000:07: resource 1 [io  0x3800-0x38ff]
[    0.303273] pci_bus 0000:07: resource 2 [mem 0xb8000000-0xbbffffff pref]
[    0.303277] pci_bus 0000:07: resource 3 [mem 0xbc000000-0xbfffffff]
[    0.303338] NET: Registered protocol family 2
[    0.303763] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.303802] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.303865] TCP: Hash tables configured (established 8192 bind 8192)
[    0.303935] TCP: reno registered
[    0.303939] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.303955] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.304079] NET: Registered protocol family 1
[    0.304114] pci 0000:00:02.0: Video device with shadowed ROM
[    0.306297] PCI: CLS 64 bytes, default 64
[    0.306403] Trying to unpack rootfs image as initramfs...
[    0.988515] Freeing initrd memory: 19992K (f58e4000 - f6c6a000)
[    0.988792] Simple Boot Flag at 0x37 set to 0x1
[    0.989002] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    0.989128] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.989200] Scanning for low memory corruption every 60 seconds
[    0.989898] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.989948] Initialise system trusted keyring
[    0.989996] audit: initializing netlink subsys (disabled)
[    0.990038] audit: type=2000 audit(1437907322.988:1): initialized
[    0.990631] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.994827] zpool: loaded
[    0.994831] zbud: loaded
[    0.994984] VFS: Disk quotas dquot_6.5.2
[    0.995074] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.996250] fuse init (API version 7.23)
[    0.996593] Key type big_key registered
[    0.997058] Key type asymmetric registered
[    0.997064] Asymmetric key parser 'x509' registered
[    0.997098] bounce: pool size: 64 pages
[    0.997182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.997240] io scheduler noop registered
[    0.997245] io scheduler deadline registered (default)
[    0.997327] io scheduler cfq registered
[    0.997564] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.997607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.997685] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.997688] vesafb: scrolling: redraw
[    0.997692] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.998349] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 3072k, total 3072k
[    0.998611] Console: switching to colour frame buffer device 128x48
[    0.998661] fb0: VESA VGA frame buffer device
[    0.998719] intel_idle: does not run on family 6 model 13
[    1.032064] ACPI: AC Adapter [ADP1] (on-line)
[    1.032246] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.064062] ACPI: Lid Switch [LID0]
[    1.064164] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.064171] ACPI: Sleep Button [SLPB]
[    1.064276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.064280] ACPI: Power Button [PWRF]
[    1.080139] tsc: Marking TSC unstable due to TSC halts in idle
[    1.080153] ACPI: acpi_idle registered with cpuidle
[    1.368253] thermal LNXTHERM:00: registered as thermal_zone0
[    1.368257] ACPI: Thermal Zone [TZS0] (41 C)
[    1.488236] thermal LNXTHERM:01: registered as thermal_zone1
[    1.488239] ACPI: Thermal Zone [TZS1] (22 C)
[    1.488350] GHES: HEST is not enabled!
[    1.488601] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.491306] isapnp: Scanning for PnP cards...
[    1.585244] Linux agpgart interface v0.103
[    1.585361] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.585390] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.585637] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.585839] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.588962] brd: module loaded
[    1.590448] loop: module loaded
[    1.590776] ata_piix 0000:00:1f.1: version 2.13
[    1.635963] scsi host0: ata_piix
[    1.679804] scsi host1: ata_piix
[    1.679904] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.679908] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.680126] libphy: Fixed MDIO Bus: probed
[    1.680131] tun: Universal TUN/TAP device driver, 1.6
[    1.680134] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.680259] PPP generic driver version 2.4.2
[    1.680417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.680427] ehci-pci: EHCI PCI platform driver
[    1.680700] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.680716] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.680738] ehci-pci 0000:00:1d.7: debug port 1
[    1.684644] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.684865] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0040000
[    1.684910] ata2: port disabled--ignoring
[    1.728529] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.772230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.772235] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.772239] usb usb1: Product: EHCI Host Controller
[    1.772242] usb usb1: Manufacturer: Linux 3.19.0-23-generic ehci_hcd
[    1.772246] usb usb1: SerialNumber: 0000:00:1d.7
[    1.772488] hub 1-0:1.0: USB hub found
[    1.772503] hub 1-0:1.0: 8 ports detected
[    1.772917] ehci-platform: EHCI generic platform driver
[    1.772946] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.772955] ohci-pci: OHCI PCI platform driver
[    1.772981] ohci-platform: OHCI generic platform driver
[    1.773001] uhci_hcd: USB Universal Host Controller Interface driver
[    1.773248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.773258] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.773269] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.773296] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.773384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.773388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.773392] usb usb2: Product: UHCI Host Controller
[    1.773395] usb usb2: Manufacturer: Linux 3.19.0-23-generic uhci_hcd
[    1.773399] usb usb2: SerialNumber: 0000:00:1d.0
[    1.773614] hub 2-0:1.0: USB hub found
[    1.773630] hub 2-0:1.0: 2 ports detected
[    1.774032] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.774042] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.774052] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.774089] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[    1.774173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.774177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774181] usb usb3: Product: UHCI Host Controller
[    1.774185] usb usb3: Manufacturer: Linux 3.19.0-23-generic uhci_hcd
[    1.774188] usb usb3: SerialNumber: 0000:00:1d.1
[    1.774404] hub 3-0:1.0: USB hub found
[    1.774416] hub 3-0:1.0: 2 ports detected
[    1.774810] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.774820] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.774829] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.774869] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.774952] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.774956] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774960] usb usb4: Product: UHCI Host Controller
[    1.774963] usb usb4: Manufacturer: Linux 3.19.0-23-generic uhci_hcd
[    1.774967] usb usb4: SerialNumber: 0000:00:1d.2
[    1.775187] hub 4-0:1.0: USB hub found
[    1.775200] hub 4-0:1.0: 2 ports detected
[    1.775598] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.775608] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.775617] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.775654] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[    1.775749] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.775753] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.775757] usb usb5: Product: UHCI Host Controller
[    1.775761] usb usb5: Manufacturer: Linux 3.19.0-23-generic uhci_hcd
[    1.775764] usb usb5: SerialNumber: 0000:00:1d.3
[    1.775976] hub 5-0:1.0: USB hub found
[    1.775988] hub 5-0:1.0: 2 ports detected
[    1.776326] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.777497] i8042: Detected active multiplexing controller, rev 1.1
[    1.777593] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.777604] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.777671] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.777725] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.777779] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.778021] mousedev: PS/2 mouse device common for all mice
[    1.778336] rtc_cmos 00:01: RTC can wake from S4
[    1.778528] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.778567] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.778585] i2c /dev entries driver
[    1.778709] device-mapper: uevent: version 1.0.3
[    1.778865] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[    1.778934] platform eisa.0: Probing EISA bus 0
[    1.778946] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.778952] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.778956] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.778986] platform eisa.0: EISA: Detected 0 cards
[    1.779019] cpufreq-nforce2: No nForce2 chipset.
[    1.779037] ledtrig-cpu: registered to indicate activity on CPUs
[    1.779053] PCCT header not found.
[    1.779055] ACPI PCC probe failed.
[    1.779298] TCP: cubic registered
[    1.779566] NET: Registered protocol family 10
[    1.780042] NET: Registered protocol family 17
[    1.780068] Key type dns_resolver registered
[    1.780416] Using IPI No-Shortcut mode
[    1.780658] Loading compiled-in X.509 certificates
[    1.787700] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.788371] Loaded X.509 cert 'Magrathea: Glacier signing key: 3bc80b0af04435ab476c1bdeff52cab8e9c74632'
[    1.788404] registered taskstats version 1
[    1.834598] isapnp: No Plug & Play device found
[    1.836572] Key type trusted registered
[    1.844201] Key type encrypted registered
[    1.844217] AppArmor: AppArmor sha1 policy hashing enabled
[    1.844223] ima: No TPM chip found, activating TPM-bypass!
[    1.844271] evm: HMAC attrs: 0x1
[    1.844654]   Magic number: 7:703:730
[    1.844819] rtc_cmos 00:01: setting system clock to 2015-07-26 10:42:04 UTC (1437907324)
[    1.844946] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.844949] EDD information not available.
[    1.845094] PM: Hibernation image not present or could not be loaded.
[    1.856929] ata1.00: ATA-6: HTS424040M9AT00, MA2OA71A, max UDMA/100
[    1.856934] ata1.00: 78140160 sectors, multi 16: LBA48 
[    1.856944] ata1.01: ATAPI: PHILIPS DVD+/-RW SDVD8441, PA49, max UDMA/33
[    1.872909] ata1.00: configured for UDMA/100
[    1.888618] ata1.01: configured for UDMA/33
[    2.140177] usb 1-8: new high-speed USB device number 3 using ehci-pci
[    2.212173] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    2.273925] usb 1-8: New USB device found, idVendor=0bda, idProduct=8176
[    2.273930] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.273934] usb 1-8: Product: 802.11n WLAN Adapter
[    2.273938] usb 1-8: Manufacturer: Realtek
[    2.273941] usb 1-8: SerialNumber: 00e04c000001
[    2.591247] usb 4-1: New USB device found, idVendor=046d, idProduct=c018
[    2.591253] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.591256] usb 4-1: Product: USB Optical Mouse
[    2.591260] usb 4-1: Manufacturer: Logitech
[    2.680324] ACPI: Battery Slot [BAT0] (battery present)
[    2.680538] scsi 0:0:0:0: Direct-Access     ATA      HTS424040M9AT00  A71A PQ: 0 ANSI: 5
[    2.680940] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.681032] sd 0:0:0:0: [sda] Write Protect is off
[    2.681037] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.681078] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.681568] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.715707]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.716770] scsi 0:0:1:0: CD-ROM            PHILIPS  DVD+-RW SDVD8441 PA49 PQ: 0 ANSI: 5
[    2.734798] sr 0:0:1:0: [sr0] scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[    2.734803] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.735017] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.735228] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.737087] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.737671] Freeing unused kernel memory: 888K (c1a97000 - c1b75000)
[    2.737764] Write protecting the kernel text: 7120k
[    2.737890] Write protecting the kernel read-only data: 3008k
[    2.737893] NX-protecting the kernel data: 5168k
[    2.758571] random: systemd-udevd urandom read with 18 bits of entropy available
[    2.951768] hidraw: raw HID events driver (C) Jiri Kosina
[    2.969109] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.969121] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    2.987478] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.994034] 8139too 0000:06:07.0 eth0: RealTek RTL8139 at 0x00013000, 00:0a:e4:e2:8d:02, IRQ 20
[    3.003938] usbcore: registered new interface driver usbhid
[    3.003945] usbhid: USB HID core driver
[    3.092831] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:046D:C018.0001/input/input12
[    3.093232] hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[    3.544573] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0, board id: 0, fw id: 41763
[    3.573711] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    4.321524] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[    4.321534] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    4.321539] PM: Basic memory bitmaps created
[    4.370511] PM: Basic memory bitmaps freed
[    4.436733] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.711442] random: nonblocking pool is initialized
[    5.749122] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    6.163162] systemd[1]: Inserted module 'autofs4'
[    6.357235] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    6.357462] systemd[1]: Detected architecture x86.
[    6.375488] systemd[1]: Set hostname to <Rico>.
[    8.433924] systemd[1]: Created slice Root Slice.
[    8.433956] systemd[1]: Starting Root Slice.
[    8.434039] systemd[1]: Listening on udev Control Socket.
[    8.434058] systemd[1]: Starting udev Control Socket.
[    8.434255] systemd[1]: Created slice System Slice.
[    8.434285] systemd[1]: Starting System Slice.
[    8.435379] systemd[1]: Starting Increase datagram queue length...
[    8.435592] systemd[1]: Created slice User and Session Slice.
[    8.435621] systemd[1]: Starting User and Session Slice.
[    8.435807] systemd[1]: Listening on Journal Audit Socket.
[    8.435828] systemd[1]: Starting Journal Audit Socket.
[    8.435921] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.435939] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.435982] systemd[1]: Reached target Remote File Systems (Pre).
[    8.435999] systemd[1]: Starting Remote File Systems (Pre).
[    8.436192] systemd[1]: Listening on Journal Socket.
[    8.436223] systemd[1]: Starting Journal Socket.
[    8.437316] systemd[1]: Starting Uncomplicated firewall...
[    8.438490] systemd[1]: Started Read required files in advance.
[    8.442601] systemd[1]: Starting Read required files in advance...
[    8.443795] systemd[1]: Mounting POSIX Message Queue File System...
[    8.445112] systemd[1]: Starting Setup Virtual Console...
[    8.446324] systemd[1]: Mounting Debug File System...
[    8.447662] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.453601] systemd[1]: Mounting Huge Pages File System...
[    8.453682] systemd[1]: Reached target Encrypted Volumes.
[    8.453735] systemd[1]: Starting Encrypted Volumes.
[    8.617069] systemd[1]: Starting Load Kernel Modules...
[    8.617244] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.617285] systemd[1]: Starting Journal Socket (/dev/log).
[    8.617379] systemd[1]: Listening on udev Kernel Socket.
[    8.617407] systemd[1]: Starting udev Kernel Socket.
[    8.617662] systemd[1]: Created slice system-getty.slice.
[    8.617683] systemd[1]: Starting system-getty.slice.
[    8.618724] systemd[1]: Starting Nameserver information manager...
[    8.619856] systemd[1]: Starting udev Coldplug all Devices...
[    8.620400] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.620432] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.620514] systemd[1]: Reached target Slices.
[    8.620532] systemd[1]: Starting Slices.
[    8.620628] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.620647] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.729688] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.729730] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    8.729822] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.729841] systemd[1]: Starting Delayed Shutdown Socket.
[    8.729916] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.729935] systemd[1]: Starting fsck to fsckd communication Socket.
[    9.153222] systemd[1]: Started Set Up Additional Binary Formats.
[    9.155159] systemd[1]: Started Uncomplicated firewall.
[    9.155621] systemd[1]: Started Setup Virtual Console.
[    9.156069] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.157480] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.533168] systemd[1]: Mounted Debug File System.
[    9.533260] systemd[1]: Mounted Huge Pages File System.
[    9.533306] systemd[1]: Mounted POSIX Message Queue File System.
[    9.533751] systemd[1]: Started Increase datagram queue length.
[    9.535928] systemd[1]: Listening on Syslog Socket.
[    9.535963] systemd[1]: Starting Syslog Socket.
[    9.545878] systemd[1]: Starting Journal Service...
[    9.655835] systemd[1]: Started Nameserver information manager.
[    9.839161] systemd[1]: Started udev Coldplug all Devices.
[    9.840643] systemd[1]: Starting udev Wait for Complete Device Initialization...
[    9.855837] lp: driver loaded but no devices found
[    9.930043] ppdev: user-space parallel port driver
[   10.239344] systemd[1]: Started Load Kernel Modules.
[   10.240748] systemd[1]: Mounting FUSE Control File System...
[   10.240924] systemd[1]: Mounted Configuration File System.
[   10.242111] systemd[1]: Starting Apply Kernel Variables...
[   10.253304] systemd[1]: Mounted FUSE Control File System.
[   10.775911] systemd[1]: Started Journal Service.
[   14.954686] wmi: Mapper loaded
[   14.979598] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.979812] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[   14.991844] [drm] Initialized drm 1.1.0 20060810
[   15.115573] [drm] Memory usable by graphics device = 256M
[   15.115585] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[   15.115588] fb: switching to inteldrmfb from VESA VGA
[   15.115643] Console: switching to colour dummy device 80x25
[   15.115760] [drm] Replacing VGA console driver
[   15.118075] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.118082] [drm] Driver supports precise vblank timestamp query.
[   15.118225] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   15.427074] intel_rng: FWH not detected
[   15.515587] yenta_cardbus 0000:06:09.0: CardBus bridge found [1025:006a]
[   15.515620] yenta_cardbus 0000:06:09.0: Using CSCINT to route CSC interrupts to PCI
[   15.515625] yenta_cardbus 0000:06:09.0: Routing CardBus interrupts to PCI
[   15.515632] yenta_cardbus 0000:06:09.0: TI: mfunc 0x00001022, devctl 0x44
[   15.699525] [drm] initialized overlay support
[   15.699602] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[   15.699782] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20141107/utaddress-258)
[   15.699792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.699795] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20141107/utaddress-258)
[   15.699801] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.699804] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.744899] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq 22
[   15.744909] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[   15.744915] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[   15.744928] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[   15.744933] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[   15.753932]  excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
[   15.766181] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xb0100000-0xb01fffff]
[   15.766190] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0100000-0xb01fffff:
[   15.766194]  excluding 0xb0100000-0xb010ffff
[   15.937167] fbcon: inteldrmfb (fb0) is primary device
[   15.937218] Console: switching to colour frame buffer device 128x48
[   15.937277] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.937281] i915 0000:00:02.0: registered panic notifier
[   16.174443] acer_wmi: Acer Laptop ACPI-WMI Extras
[   16.182554] acer_wmi: Disabling ACPI video driver
[   16.183752] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[   17.136049] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55418 usecs (2670 samples)
[   17.136059] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   18.111921] cfg80211: Calling CRDA to update world regulatory domain
[   19.085580] rtl8192cu: Chip version 0x10
[   19.163305] rtl8192cu: MAC address: 48:02:2a:7e:9e:37
[   19.163313] rtl8192cu: Board Type 0
[   19.163545] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   19.163594] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   19.414044] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   19.415427] usbcore: registered new interface driver rtl8192cu
[   20.771234] cfg80211: World regulatory domain updated:
[   20.771245] cfg80211:  DFS Master region: unset
[   20.771248] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.771253] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.771257] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.771261] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.771265] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.771269] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.981870] Adding 1998844k swap on /dev/sda6.  Priority:-1 extents:1 across:1998844k FS
[   21.575032] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   22.235958] systemd-journald[194]: Received request to flush runtime journal from PID 1
[   24.297005] audit: type=1400 audit(1437900146.948:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=401 comm="apparmor_parser"
[   24.297025] audit: type=1400 audit(1437900146.948:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=401 comm="apparmor_parser"
[   24.442726] audit: type=1400 audit(1437900147.096:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=401 comm="apparmor_parser"
[   24.442747] audit: type=1400 audit(1437900147.096:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=401 comm="apparmor_parser"
[   24.442758] audit: type=1400 audit(1437900147.096:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=401 comm="apparmor_parser"
[   24.442769] audit: type=1400 audit(1437900147.096:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=401 comm="apparmor_parser"
[   25.111436] audit: type=1400 audit(1437900147.760:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=401 comm="apparmor_parser"
[   25.111462] audit: type=1400 audit(1437900147.760:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=401 comm="apparmor_parser"
[   25.111474] audit: type=1400 audit(1437900147.760:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=401 comm="apparmor_parser"
[   25.111485] audit: type=1400 audit(1437900147.760:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=401 comm="apparmor_parser"
[   39.263699] 8139too 0000:06:07.0 eth0: link down
[   39.282445] rtl8192cu: MAC auto ON okay!
[   39.326455] rtl8192cu: Tx queue select: 0x05
[   41.352069] wlan0: authenticate with c4:6e:1f:a1:20:d8
[   41.364375] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[   41.377299] wlan0: authenticated
[   41.380051] wlan0: associate with c4:6e:1f:a1:20:d8 (try 1/3)
[   41.396078] wlan0: RX AssocResp from c4:6e:1f:a1:20:d8 (capab=0x431 status=0 aid=3)
[   41.396911] wlan0: associated
[  378.858807] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 4755.173439] wlan0: Connection to AP c4:6e:1f:a1:20:d8 lost
[ 4755.186535] cfg80211: Calling CRDA to update world regulatory domain
[ 4756.167769] cfg80211: World regulatory domain updated:
[ 4756.167780] cfg80211:  DFS Master region: unset
[ 4756.167783] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4756.167788] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4756.167792] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4756.167796] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4756.167800] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4756.167804] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4756.671782] wlan0: authenticate with c4:6e:1f:a1:20:d8
[ 4756.689958] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[ 4756.792041] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 2/3)
[ 4756.896040] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 3/3)
[ 4757.000053] wlan0: authentication with c4:6e:1f:a1:20:d8 timed out
[ 4758.225057] wlan0: authenticate with c4:6e:1f:a1:20:d8
[ 4758.260076] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[ 4758.265729] wlan0: authenticated
[ 4758.268201] wlan0: associate with c4:6e:1f:a1:20:d8 (try 1/3)
[ 4758.293501] wlan0: RX AssocResp from c4:6e:1f:a1:20:d8 (capab=0x431 status=0 aid=2)
[ 4758.294344] wlan0: associated
[ 4795.253378] wlan0: Connection to AP c4:6e:1f:a1:20:d8 lost
[ 4795.276104] cfg80211: Calling CRDA to update world regulatory domain
[ 4795.284832] cfg80211: World regulatory domain updated:
[ 4795.284841] cfg80211:  DFS Master region: unset
[ 4795.284845] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4795.284850] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4795.284854] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4795.284858] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4795.284862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4795.284865] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4796.080785] wlan0: authenticate with c4:6e:1f:a1:20:d8
[ 4796.106613] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[ 4796.212039] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 2/3)
[ 4796.316064] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 3/3)
[ 4796.420040] wlan0: authentication with c4:6e:1f:a1:20:d8 timed out
[ 4797.640863] wlan0: authenticate with c4:6e:1f:a1:20:d8
[ 4797.666730] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[ 4797.672937] wlan0: authenticated
[ 4797.676384] wlan0: associate with c4:6e:1f:a1:20:d8 (try 1/3)
[ 4797.718576] wlan0: RX AssocResp from c4:6e:1f:a1:20:d8 (capab=0x431 status=0 aid=2)
[ 4797.719414] wlan0: associated
[17805.221342] wlan0: Connection to AP c4:6e:1f:a1:20:d8 lost
[17805.236730] cfg80211: Calling CRDA to update world regulatory domain
[17805.246673] cfg80211: World regulatory domain updated:
[17805.246682] cfg80211:  DFS Master region: unset
[17805.246686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[17805.246691] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[17805.246695] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[17805.246699] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[17805.246703] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[17805.246706] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[17806.052200] wlan0: authenticate with c4:6e:1f:a1:20:d8
[17806.083358] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[17806.184040] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 2/3)
[17806.288037] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 3/3)
[17806.392037] wlan0: authentication with c4:6e:1f:a1:20:d8 timed out
[17807.612929] wlan0: authenticate with c4:6e:1f:a1:20:d8
[17807.638786] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[17807.744040] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 2/3)
[17807.848038] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 3/3)
[17807.952037] wlan0: authentication with c4:6e:1f:a1:20:d8 timed out
[17809.681025] wlan0: authenticate with c4:6e:1f:a1:20:d8
[17809.707330] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[17809.711289] wlan0: authenticated
[17809.720090] wlan0: associate with c4:6e:1f:a1:20:d8 (try 1/3)
[17809.779407] wlan0: RX AssocResp from c4:6e:1f:a1:20:d8 (capab=0x431 status=0 aid=2)
[17809.780477] wlan0: associated
[20862.633056] sr 0:0:1:0: [sr0] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[20862.633068] sr 0:0:1:0: [sr0] Sense Key : Not Ready [current]
[20862.633075] sr 0:0:1:0: [sr0] Add. Sense: Medium not present
[20862.633079] sr 0:0:1:0: [sr0] CDB: 
[20862.633082] Read(10): 28 00 00 00 00 00 00 00 08 00
[20862.633096] blk_update_request: I/O error, dev sr0, sector 0
[20862.633134] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633146] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633154] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633163] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633172] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633180] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633189] sr 0:0:1:0: [sr0] unaligned transfer
[20862.633197] sr 0:0:1:0: [sr0] unaligned transfer
[20924.197043] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[20931.245067] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[21078.805224] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[21351.073177] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[21421.025093] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[21629.381096] sr 0:0:1:0: [sr0] CDROM not ready.  Make sure there is a disc in the drive.
[21960.700420] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[21961.093507] wlan0: deauthenticating from c4:6e:1f:a1:20:d8 by local choice (Reason: 3=DEAUTH_LEAVING)
[21961.116990] cfg80211: Calling CRDA to update world regulatory domain
[21961.161682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[21962.736811] cfg80211: World regulatory domain updated:
[21962.736821] cfg80211:  DFS Master region: unset
[21962.736824] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[21962.736830] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[21962.736834] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[21962.736838] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[21962.736841] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[21962.736845] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[21963.463856] PM: Syncing filesystems ... done.
[21965.143292] PM: Preparing system for mem sleep
[21965.583614] Freezing user space processes ... (elapsed 0.124 seconds) done.
[21965.708392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[21965.709666] PM: Entering mem sleep
[21965.709696] Suspending console(s) (use no_console_suspend to debug)
[21965.744339] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[21965.744495] sd 0:0:0:0: [sda] Stopping disk
[21966.220802] PM: suspend of devices complete after 510.830 msecs
[21966.236189] PM: late suspend of devices complete after 15.381 msecs
[21966.236774] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[21966.236870] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[21966.236929] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[21966.236987] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[21966.237045] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[21966.252046] PM: noirq suspend of devices complete after 15.851 msecs
[21966.252275] ACPI: Preparing to enter system sleep state S3
[21966.290146] PM: Saving platform NVS memory
[21966.290285] Disabling non-boot CPUs ...
[21966.290285] ACPI: Low-level resume complete
[21966.290285] PM: Restoring platform NVS memory
[21966.290285] Force enabled HPET at resume
[21966.290285] ACPI: Waking up from system sleep state S3
[21966.420376] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[21966.420435] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[21966.420494] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[21966.420551] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[21966.436099] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[21966.436391] PM: noirq resume of devices complete after 16.269 msecs
[21966.436737] PM: early resume of devices complete after 0.300 msecs
[21966.495285] usb usb2: root hub lost power or was reset
[21966.495331] usb usb3: root hub lost power or was reset
[21966.495373] usb usb4: root hub lost power or was reset
[21966.495415] usb usb5: root hub lost power or was reset
[21966.496748] ata2: port disabled--ignoring
[21966.498916] sd 0:0:0:0: [sda] Starting disk
[21966.624255] rtc_cmos 00:01: System wakeup disabled by ACPI
[21966.976054] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
[21967.668198] PM: resume of devices complete after 1231.452 msecs
[21967.668406] rtl8192cu: Chip version 0x10
[21967.745276] rtl8192cu: MAC address: 48:02:2a:7e:9e:37
[21967.745280] rtl8192cu: Board Type 0
[21967.745520] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[21967.745579] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[21967.745915] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[21967.746681] PM: Finishing wakeup.
[21967.746684] Restarting tasks ... done.
[21967.780678] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[21967.780687] ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[21967.804472] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[21967.804482] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[21967.820736] ata1.00: configured for UDMA/100
[21967.852505] ata1.01: configured for UDMA/33
[21968.872049] systemd[1]: Unit suspend.target is bound to inactive unit systemd-suspend.service. Stopping, too.
[21969.386769] 8139too 0000:06:07.0 eth0: link down
[21969.971092] rtl8192cu: MAC auto ON okay!
[21970.004736] rtl8192cu: Tx queue select: 0x05
[21972.173652] wlan0: authenticate with c4:6e:1f:a1:20:d8
[21972.193563] wlan0: send auth to c4:6e:1f:a1:20:d8 (try 1/3)
[21972.197367] wlan0: authenticated
[21972.200072] wlan0: associate with c4:6e:1f:a1:20:d8 (try 1/3)
[21972.220145] wlan0: RX AssocResp from c4:6e:1f:a1:20:d8 (capab=0x431 status=0 aid=2)
[21972.220967] wlan0: associated

Jeszcze mam pytanie - Czy da się zrobić tak, aby wszystkie polecenia były wykonywane automatycznie po wznowieniu? Jeśli nie, to trudno - uruchomienie jednego pliku po hibernacji nie będzie jakieś wybitnie męczące, ale miło byłoby to w pełni zautomatyzować .

[wojtbar]

Jeżeli wiesz jaka kolejność usuwania modułów to np. plik w bash-u o nazwie jaką chcesz, skopiować do katalogu /usr/local/bin. nadać plikowi prawa wykonywalności a w pliku wiadomo co ;. Uruchamiasz plik i .... .

[4340]

Wszystko zadziałało tak jak chciałem, jeszcze raz wielkie dzięki .
Temat można zamknąć.