hp 1315, niby zainstalowane ale nie drukuje

Tylko tematy nie mieszczące się powyżej.
Awatar użytkownika
urbinek
Sędziwy Jeż
Sędziwy Jeż
Posty: 44
Rejestracja: 03 wrz 2007, 11:43
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Kontakt:

hp 1315, niby zainstalowane ale nie drukuje

Post autor: urbinek »

otóż,
drukarka hp deskjet 1315 została poprawnie (?) zainstalowana, wykrywa ja itp
był problem z kolorowym tuszem ale po wyjęciu go wszystko śmiga - został czarny
jednak gdy chcę coś wydrukować np stronę testowa (hplip toolbox) program zwraca mi komunikat, że zaraz rozpocznie się drukowanie jeśli tak się niestanie mam zajrzeć na stronkę hplip (nic tam nie znalazłem ;/) drukarka natomiast nie drukuje
w kprinter jest zadanie drukowania ale ciągle oczekujące

hp-check:

Kod: Zaznacz cały

 
HP Linux Imaging and Printing System (ver. 2.8.2)
Dependency/Version Check Utility ver. 13.0

Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has
the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...
warning: Invalid ppd_dir value: /usr/share/ppd/hpijs/HP
warning: Invalid drv_dir value: /usr/share/cups/drv/hp/

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux paulinka 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686 GNU/Linux

Distribution:
ubuntu 8.04

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt version...
OK, version 3.17 installed.

Checking SIP version...
error: SIP not installed or version not found.

Checking for CUPS...
Status: planista jest uruchomiony
Version: 1.3.7


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: cups - Common Unix Printing System...
OK, found.

Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.

Checking for dependency: cups-devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt - Qt interface for Python...
OK, found.

Checking for dependency: python-devel - Python development files...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 2.8.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hpssd]
# Note: hpssd does not support dynamic ports
# Port 2207 is the IANA assigned port for hpssd
port=2207

[hplip]
version=2.8.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.2.10


-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------

No devices found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                   Model
  -------------------------------------------  --------------------------------
  hp:/usb/psc_1310_series?serial=CN517C2280O2  HP psc 1310 series

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


warning: No queues found.

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).

Checking output of 'scanimage -L'...
device `hpaio:/usb/psc_1310_series?serial=CN517C2280O2' is a Hewlett-Packard psc_1310_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


-----------------
| USB I/O SETUP |
-----------------


Checking for permissions of USB attached printers...

HP Device 0x3f11 at 001:003:
    Device URI: hp:/usb/psc_1310_series?serial=CN517C2280O2
    Device node: /dev/bus/usb/001/003
    Mode: 0660
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/003
# owner: lp
# group: scanner
user::rw-
user:paulinka:rw-
group::rw-
mask::rw-
other::---



-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

paulinka@paulinka:~$                                                           
EDIT:
any1 ?
ciasteczko =D
JacekWawa
Piegowaty Guziec
Piegowaty Guziec
Posty: 29
Rejestracja: 27 lip 2008, 12:59
Płeć: Mężczyzna
Wersja Ubuntu: 9.04
Środowisko graficzne: GNOME
Kontakt:

Odp: hp 1315, niby zainstalowane ale nie drukuje

Post autor: JacekWawa »

był problem z kolorowym tuszem ale po wyjęciu go wszystko śmiga - został czarny
to śmiga czy nie śmiga?

jeżeli drukowało przed wyjęciem koloru, to ustaw domyślny sposób wydruku na odcienie szarości
Awatar użytkownika
urbinek
Sędziwy Jeż
Sędziwy Jeż
Posty: 44
Rejestracja: 03 wrz 2007, 11:43
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Kontakt:

Odp: hp 1315, niby zainstalowane ale nie drukuje

Post autor: urbinek »

sry, ze tak późno ale byłem na wakacjach,
jak wyjmę kolorowy to pisze, ze wszystko cacy ale nie drukuje
ciasteczko =D
palkosky
Piegowaty Guziec
Piegowaty Guziec
Posty: 18
Rejestracja: 21 gru 2008, 12:01
Płeć: Kobieta
Wersja Ubuntu: 10.04
Środowisko graficzne: GNOME
Architektura: x86
Kontakt:

Odp: hp 1315, niby zainstalowane ale nie drukuje

Post autor: palkosky »

no to ja się podłączę pod temat, bo mam tak samo - HP psc 1315, kseruje(ale tylko b&w), nie drukuje i nie skanuje. przy czym przy drukowaniu bierze papier i 'udaje' że drukuje, czyli nie jest tak że papier tylko przelatuje ale normalnie pracuje jakby miala drukować.... może to kwestia sterowników? tylko skad mam je wziać?

Kod: Zaznacz cały

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux home-desktop 2.6.32-27-generic #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 i686 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!

Checking for CUPS...
Status: planista jest uruchomiony
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libcupsimage2-dev

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libdbus-1-dev

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes build-essential

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libjpeg62-dev

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libtool

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python-qt4-dbus

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python-dev

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
To install this dependency, execute this command:
sudo aptitude install --assume-yes python-reportlab

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo aptitude install --assume-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
To install this dependency, execute this command:
sudo aptitude install --assume-yes xsane


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables. 

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
error: Could not access file: No such file or directory

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model              
  --------------------------------  -------------------
  hp:/usb/psc_1310_series?serial=C  HP psc 1310 series 
  N51HC310HO2                                          

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
psc-1310-series-
----------------
Type: Printer
Device URI: hp:/usb/psc_1310_series?serial=CN51HC310HO2
PPD: /etc/cups/ppd/psc-1310-series-.ppd
PPD Description: HP PSC 1310 Series hpijs, 3.10.2
Printer status: drukarka psc-1310-series- jest bezczynna. włączona od wto, 28 gru 2010, ready to print
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/psc_1310_series?serial=CN51HC310HO2' is a Hewlett-Packard psc_1310_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x3f11 at 006:002: 
    Device URI: hp:/usb/psc_1310_series?serial=CN51HC310HO2
    Device node: /dev/bus/usb/006/002
    Mode: 0664

---------------
| USER GROUPS |
---------------

root

error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.

-----------
| SUMMARY |
-----------

error: 13 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:
sudo aptitude install --assume-yes libcupsimage2-dev
sudo aptitude install --assume-yes libdbus-1-dev
sudo aptitude install --assume-yes build-essential
sudo aptitude install --assume-yes libjpeg62-dev
sudo aptitude install --assume-yes libsnmp-dev
sudo aptitude install --assume-yes libtool
sudo aptitude install --assume-yes libusb-dev
sudo aptitude install --assume-yes python-qt4-dbus
sudo aptitude install --assume-yes python-dev
sudo aptitude install --assume-yes python-reportlab
sudo aptitude install --assume-yes libsane-dev
sudo aptitude install --assume-yes xsane

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
ODPOWIEDZ

Wróć do „Inne”

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 4 gości