Program do tunera TV

[mich@l2312]

Kupiłem tuner TV Media-Tech MT4155. Niestety Ubuntu go nie wykrywa. Może trzeba mieć jakiś program? Mam sterowniki ale do Windowsa.

[frklin]

Musisz podać podstawowe informację o tym sprzęcie inaczej się po prostu nie da
Wklej tutaj wyniki tych poleceń:

Kod: Zaznacz cały

tail -2 /proc/asound/oss/sndstat

Kod: Zaznacz cały

lspci

Kod: Zaznacz cały

sudo lspci -v | grep -i audio

[mich@l2312]

Wydawałem polecenia po kolei, jak napisał frklin:

0: Realtek ALC658D
1: SAA7134 Mixer

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
02:05.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)

[frklin]

Podaj jeszcze:

Kod: Zaznacz cały

dmesg

[mich@l2312]

Proszę:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f59a0
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7560 checksum 0
[ 0.000000] ACPI: RSDP 000F7560, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 3FFF3040, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF3180, 3C01 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF6E00, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081
[ 0.000000] Kernel command line: root=UUID=ac92c69c-de89-488c-9851-63a07d936299 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 3264.741 MHz processor.
[ 16.235819] Console: colour VGA+ 80x25
[ 16.235823] console [tty0] enabled
[ 16.236164] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.236495] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.259317] Memory: 1027360k/1048512k available (2177k kernel code, 20500k reserved, 1006k data, 368k init, 131008k highmem)
[ 16.259325] virtual kernel memory layout:
[ 16.259326] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 16.259327] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.259328] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.259329] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.259330] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 16.259331] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 16.259331] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 16.259334] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.259374] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 16.339229] Calibrating delay using timer specific routine.. 6534.32 BogoMIPS (lpj=13068655)
[ 16.339255] Security Framework initialized
[ 16.339260] SELinux: Disabled at boot.
[ 16.339274] AppArmor: AppArmor initialized
[ 16.339278] Failure registering capabilities with primary security module.
[ 16.339286] Mount-cache hash table entries: 512
[ 16.339405] Initializing cgroup subsys ns
[ 16.339410] Initializing cgroup subsys cpuacct
[ 16.339421] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 00000000
[ 16.339430] monitor/mwait feature present.
[ 16.339431] using mwait in idle threads.
[ 16.339437] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 16.339439] CPU: L2 cache: 1024K
[ 16.339442] CPU: Physical Processor ID: 0
[ 16.339444] CPU: After all inits, caps: bfebfbff 00100000 00000000 0000b180 0000441d 00000000 00000000 00000000
[ 16.339453] Compat vDSO mapped to ffffe000.
[ 16.339468] Checking 'hlt' instruction... OK.
[ 16.355611] SMP alternatives: switching to UP code
[ 16.357324] Early unpacking initramfs... done
[ 16.625561] ACPI: Core revision 20070126
[ 16.625610] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.743599] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[ 16.743616] SMP alternatives: switching to SMP code
[ 16.744302] Booting processor 1/1 eip 3000
[ 16.754392] Initializing CPU#1
[ 16.834191] Calibrating delay using timer specific routine.. 6529.58 BogoMIPS (lpj=13059176)
[ 16.834200] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 00000000
[ 16.834207] monitor/mwait feature present.
[ 16.834213] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 16.834215] CPU: L2 cache: 1024K
[ 16.834218] CPU: Physical Processor ID: 0
[ 16.834220] CPU: After all inits, caps: bfebfbff 00100000 00000000 0000b180 0000441d 00000000 00000000 00000000
[ 16.834578] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[ 16.834616] Total of 2 processors activated (13063.91 BogoMIPS).
[ 16.834744] ENABLING IO-APIC IRQs
[ 16.834909] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.982015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 17.001987] Brought up 2 CPUs
[ 17.002010] CPU0 attaching sched-domain:
[ 17.002013] domain 0: span 03
[ 17.002015] groups: 01 02
[ 17.002018] domain 1: span 03
[ 17.002020] groups: 03
[ 17.002022] CPU1 attaching sched-domain:
[ 17.002024] domain 0: span 03
[ 17.002025] groups: 02 01
[ 17.002028] domain 1: span 03
[ 17.002030] groups: 03
[ 17.002274] net_namespace: 64 bytes
[ 17.002281] Booting paravirtualized kernel on bare hardware
[ 17.002813] Time: 13:58:51 Date: 07/31/08
[ 17.002836] NET: Registered protocol family 16
[ 17.003083] EISA bus registered
[ 17.003088] ACPI: bus type pci registered
[ 17.027199] PCI: PCI BIOS revision 2.10 entry at 0xfba80, last bus=2
[ 17.027202] PCI: Using configuration type 1
[ 17.027209] Setting up standard PCI resources
[ 17.028850] ACPI: EC: Look up EC in DSDT
[ 17.032067] ACPI: Interpreter enabled
[ 17.032070] ACPI: (supports S0 S3 S4 S5)
[ 17.032085] ACPI: Using IOAPIC for interrupt routing
[ 17.036486] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.036959] Force enabled HPET at base address 0xfed00000
[ 17.036966] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 17.036969] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 17.037497] PCI: Transparent bridge - 0000:00:1e.0
[ 17.037521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.037627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 17.044678] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 17.044775] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 17.044871] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 17.044964] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 17.045058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 17.045151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 17.045245] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 17.045339] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 17.045470] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.045511] pnp: PnP ACPI init
[ 17.045519] ACPI: bus type pnp registered
[ 17.048149] pnpacpi: exceeded the max number of mem resources: 12
[ 17.048216] pnp: PnP ACPI: found 14 devices
[ 17.048219] ACPI: ACPI bus type pnp unregistered
[ 17.048223] PnPBIOS: Disabled by ACPI PNP
[ 17.048525] PCI: Using ACPI for IRQ routing
[ 17.048529] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.085821] NET: Registered protocol family 8
[ 17.085823] NET: Registered protocol family 20
[ 17.085936] hpet clockevent registered
[ 17.085941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 17.085946] hpet0: 3 64-bit timers, 14318180 Hz
[ 17.086983] AppArmor: AppArmor Filesystem Enabled
[ 17.089683] Time: tsc clocksource has been installed.
[ 17.105827] system 00:01: ioport range 0xb78-0xb7b has been reserved
[ 17.105831] system 00:01: ioport range 0xf78-0xf7b has been reserved
[ 17.105834] system 00:01: ioport range 0xa78-0xa7b has been reserved
[ 17.105837] system 00:01: ioport range 0xe78-0xe7b has been reserved
[ 17.105840] system 00:01: ioport range 0xbbc-0xbbf has been reserved
[ 17.105842] system 00:01: ioport range 0xfbc-0xfbf has been reserved
[ 17.105845] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 17.105848] system 00:01: ioport range 0x294-0x297 has been reserved
[ 17.105863] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 17.105874] system 00:0d: iomem range 0xcd000-0xcffff has been reserved
[ 17.105877] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.105880] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.105882] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 17.105885] system 00:0d: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 17.105887] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 17.105890] system 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
[ 17.105892] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.105895] system 00:0d: iomem range 0xfec01000-0xfed8ffff could not be reserved
[ 17.105898] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.105900] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 17.105903] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved

[mich@l2312]

Tu jest dalszy ciąg (chciałem na raz wszystko ale wyskakiwał błąd):

[ 17.136339] PCI: Bridge: 0000:00:01.0
[ 17.136342] IO window: 9000-9fff
[ 17.136347] MEM window: f8000000-f9ffffff
[ 17.136351] PREFETCH window: e8000000-f7ffffff
[ 17.136355] PCI: Bridge: 0000:00:1e.0
[ 17.136358] IO window: a000-afff
[ 17.136363] MEM window: fa000000-fa0fffff
[ 17.136367] PREFETCH window: disabled.
[ 17.136383] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.136393] NET: Registered protocol family 2
[ 17.173716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.174017] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.174552] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.174870] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.174874] TCP reno registered
[ 17.185805] checking if image is initramfs... it is
[ 17.588665] Switched to high resolution mode on CPU 0
[ 17.588784] Switched to high resolution mode on CPU 1
[ 17.714400] Freeing initrd memory: 7329k freed
[ 17.715253] audit: initializing netlink socket (disabled)
[ 17.715266] audit(1217512731.224:1): initialized
[ 17.715455] highmem bounce pool size: 64 pages
[ 17.717700] VFS: Disk quotas dquot_6.5.1
[ 17.717792] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.717930] io scheduler noop registered
[ 17.717933] io scheduler anticipatory registered
[ 17.717935] io scheduler deadline registered
[ 17.717945] io scheduler cfq registered (default)
[ 17.718026] Boot video device is 0000:01:00.0
[ 17.718352] isapnp: Scanning for PnP cards...
[ 18.069245] isapnp: No Plug & Play device found
[ 18.103179] Real Time Clock Driver v1.12ac
[ 18.103289] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.103401] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.104445] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.105423] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.105498] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.105623] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.107890] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.107897] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.135549] mice: PS/2 mouse device common for all mice
[ 18.135698] EISA: Probing bus 0 at eisa.0
[ 18.135735] EISA: Detected 0 cards.
[ 18.135739] cpuidle: using governor ladder
[ 18.135741] cpuidle: using governor menu
[ 18.135817] NET: Registered protocol family 1
[ 18.135844] Using IPI No-Shortcut mode
[ 18.135871] registered taskstats version 1
[ 18.135962] Magic number: 0:158:990
[ 18.135970] hash matches device ttyd3
[ 18.136058] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.136060] EDD information not available.
[ 18.136250] Freeing unused kernel memory: 368k freed
[ 18.161671] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.356660] fuse init (API version 7.9)
[ 19.635651] usbcore: registered new interface driver usbfs
[ 19.635683] usbcore: registered new interface driver hub
[ 19.645269] usbcore: registered new device driver usb
[ 19.653964] USB Universal Host Controller Interface driver v3.0
[ 19.654033] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.654047] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 19.654052] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.654266] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 19.654298] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00
[ 19.654479] usb usb1: configuration #1 chosen from 1 choice
[ 19.654516] hub 1-0:1.0: USB hub found
[ 19.654525] hub 1-0:1.0: 2 ports detected
[ 19.757081] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17
[ 19.757098] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 19.757103] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.757138] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 19.757166] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b000
[ 19.757321] usb usb2: configuration #1 chosen from 1 choice
[ 19.757362] hub 2-0:1.0: USB hub found
[ 19.757370] hub 2-0:1.0: 2 ports detected
[ 19.860896] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.860912] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.860918] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.860953] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 19.860982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 19.861136] usb usb3: configuration #1 chosen from 1 choice
[ 19.861172] hub 3-0:1.0: USB hub found
[ 19.861181] hub 3-0:1.0: 2 ports detected
[ 19.964653] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.964669] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 19.964674] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 19.964711] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 19.964737] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 19.964893] usb usb4: configuration #1 chosen from 1 choice
[ 19.964933] hub 4-0:1.0: USB hub found
[ 19.964942] hub 4-0:1.0: 2 ports detected
[ 20.067732] SCSI subsystem initialized
[ 20.068576] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 20.068594] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.068600] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.068644] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 20.072564] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.072573] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 20.072585] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfa100000
[ 20.088256] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.088389] usb usb5: configuration #1 chosen from 1 choice
[ 20.088421] hub 5-0:1.0: USB hub found
[ 20.088429] hub 5-0:1.0: 8 ports detected
[ 20.116502] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.124259] libata version 3.00 loaded.
[ 20.143898] FDC 0 is a post-1991 82077
[ 20.192268] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 20.192275] 8139cp 0000:02:02.0: Try the "8139too" driver instead.
[ 20.198409] 8139too Fast Ethernet driver 0.9.28
[ 20.198466] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.199167] eth0: RealTek RTL8139 at 0xa000, 00:50:8d:6a:93:13, IRQ 18
[ 20.199170] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 20.203141] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.203180] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.203195] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 20.206564] ata_piix 0000:00:1f.2: version 2.12
[ 20.206570] ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
[ 20.206586] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 20.206617] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.207729] scsi0 : ata_piix
[ 20.208673] scsi1 : ata_piix
[ 20.209447] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 20.209451] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 20.535598] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB03, max UDMA/33
[ 20.535602] ata1.00: applying bridge limits
[ 20.535802] ata1.01: ATA-7: Maxtor 6Y120M0, YAR511W0, max UDMA/133
[ 20.535807] ata1.01: 240121728 sectors, multi 16: LBA
[ 20.710202] ata1.00: configured for UDMA/33
[ 20.726325] ata1.01: configured for UDMA/133
[ 21.042560] ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.05, max UDMA/66
[ 21.213129] ata2.00: configured for UDMA/66
[ 21.214008] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB03 PQ: 0 ANSI: 5
[ 21.214175] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5
[ 21.215624] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.05 PQ: 0 ANSI: 5
[ 21.227972] Driver 'sd' needs updating - please use bus_type methods
[ 21.229766] sd 0:0:1:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
[ 21.229798] sd 0:0:1:0: [sda] Write Protect is off
[ 21.229802] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 21.229834] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.229927] sd 0:0:1:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
[ 21.229944] sd 0:0:1:0: [sda] Write Protect is off
[ 21.229948] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 21.229998] Driver 'sr' needs updating - please use bus_type methods
[ 21.230022] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.230028] sda: sda1 sda2 sda3 sda4
[ 21.271519] sd 0:0:1:0: [sda] Attached SCSI disk
[ 21.277258] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 21.277292] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 21.277320] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 21.278917] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.278924] Uniform CD-ROM driver Revision: 3.20
[ 21.278993] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 21.284724] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.284788] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 21.573261] Attempting manual resume
[ 21.573265] swsusp: Resume From Partition 8:4
[ 21.573267] PM: Checking swsusp image.
[ 21.573480] PM: Resume from disk failed.
[ 21.604857] kjournald starting. Commit interval 5 seconds
[ 21.604871] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.957249] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 31.104673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.152542] intel_rng: FWH not detected
[ 31.160533] Linux agpgart interface v0.102
[ 31.185061] agpgart: Detected an Intel 865 Chipset.
[ 31.190569] agpgart: AGP aperture is 128M @ 0xe0000000
[ 31.239320] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.343875] iTCO_vendor_support: vendor-support=0
[ 31.346401] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 31.780404] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 31.790284] input: Power Button (FF) as /devices/virtual/input/input4
[ 31.808601] parport_pc 00:08: reported by Plug and Play ACPI
[ 31.808650] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 31.809882] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[ 31.809924] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.822066] ACPI: Power Button (FF) [PWRF]
[ 31.822163] input: Power Button (CM) as /devices/virtual/input/input5
[ 31.846001] ACPI: Power Button (CM) [PWRB]
[ 32.195039] ath_hal: module license 'Proprietary' taints kernel.
[ 32.277187] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 32.525605] Linux video capture interface: v2.00
[ 32.692245] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[ 32.692296] [fglrx] ASYNCIO init succeed!
[ 32.692910] [fglrx] PAT is enabled successfully!
[ 32.708725] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 32.819981] wlan: 0.9.4
[ 32.879855] ath_pci: 0.9.4
[ 32.879934] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 33.714043] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 33.912969] ath_rate_sample: 1.2 (0.9.4)
[ 33.913637] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 33.913646] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 33.913661] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 33.913672] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 33.913679] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 33.913685] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 33.913688] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 33.913691] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 33.913693] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 33.913697] wifi0: Use hw queue 8 for CAB traffic
[ 33.913700] wifi0: Use hw queue 9 for beacons
[ 33.951362] wifi0: Atheros 5212: mem=0xfa000000, irq=20
[ 33.953103] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 33.953117] saa7130[0]: found at 0000:02:05.0, rev: 1, irq: 21, latency: 32, mmio: 0xfa011000
[ 33.953125] saa7130[0]: subsystem: 1303:2001, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 33.953137] saa7130[0]: board init: gpio is 40000
[ 34.085194] saa7130[0]: i2c eeprom 00: 03 13 01 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[ 34.085206] saa7130[0]: i2c eeprom 10: ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085215] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085224] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085233] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085242] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085252] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085261] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 34.085327] saa7130[0]: registered device video0 [v4l2]
[ 34.085348] saa7130[0]: registered device vbi0
[ 34.092419] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 22
[ 34.092452] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 34.140115] saa7134 ALSA driver for DMA sound loaded
[ 34.140153] saa7130[0]/alsa: saa7130[0] at 0xfa011000 irq 21 registered as card -2
[ 34.413495] intel8x0_measure_ac97_clock: measured 53670 usecs
[ 34.413502] intel8x0: clocking to 48000
[ 35.276961] lp0: using parport0 (interrupt-driven).
[ 35.334859] Adding 979956k swap on /dev/sda4. Priority:-1 extents:1 across:979956k
[ 35.880377] EXT3 FS on sda3, internal journal
[ 37.079840] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.520137] No dock devices found.
[ 38.529939] apm: BIOS not found.
[ 38.785047] ppdev: user-space parallel port driver
[ 38.923459] audit(1217505552.743:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4973 profile="/usr/sbin/cupsd" namespace="default"
[ 40.321085] eth0: link down
[ 43.274580] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 46.014679] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 46.014687] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 46.014693] [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset)
[ 46.014822] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 46.014842] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 46.014879] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 46.014911] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[ 46.020037] [fglrx] GART Table is not in FRAME_BUFFER range
[ 46.020048] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 46.020052] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000
[ 46.178095] [fglrx] interrupt source 20008000 successfully enabled
[ 46.178102] [fglrx] enable ID = 0x00000004
[ 46.178114] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 46.178197] [fglrx] interrupt source 10000000 successfully enabled
[ 46.178203] [fglrx] enable ID = 0x00000005
[ 46.178210] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 60.170638] NET: Registered protocol family 10
[ 60.171125] lo: Disabled Privacy Extensions
[ 60.171897] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 70.774397] ath0: no IPv6 routers present
[ 70.943989] NET: Registered protocol family 17
[ 89.890346] ath0: no IPv6 routers present

EDIT:
Nie ma żadnego programu do tego tunera? Bardzo mi na tym zależy, ponieważ mógłbym wtedy zrezygnować z Windowsa, a tak to mnie to trzyma.

[lodovee]

możesz zerknąć sobie tutaj: viewtopic.php?t=71091

[mich@l2312]

Zainstalowałem ten tvtime ale tylko na sekundę się włącza a potem się wyłącza. Przez chwilę widać czarny ekran.

[Adlatus]

Na karcie od ATI tak już jest. Dopiero na najnowszych sterownikach (od wersji 8.6) problem współpracy z kartą TV został rozwiązany. Poczytaj czy Twoja karta dobrze działa na tych sterownika. Jeżeli tak, to instaluj.

[mich@l2312]

Pobrałem sterowniki do mojej karty graficznej z oficjalnej strony, ale instaluje się wersja 8.5. A nazwa pliku jest: ati-driver-instaler-8-7-x86.x86_64.run

[Adlatus]

Napisałem

Poczytaj czy Twoja karta dobrze działa na tych sterownika.

Poczytałeś? Jeżeli byś czytał to znalazł byś rozwiązanie jak poprawnie instalować sterowniki do twojej karty.

[sebo125]

Mam podobny problem jednak próbuję podejść do tematu 2x. Za pierwszym razem jakiś czas temu nie udało się z powodu sterowników do Ati 3870, teraz powinno pójść, lecz moje pytanie brzmi czy ktoś ma działającą konfigurację Tunera TV AverMedia TVPhone 98 with vcr + Radek 3870 ?

EDIT:

Pobrałem sterowniki do mojej karty graficznej z oficjalnej strony, ale instaluje się wersja 8.5. A nazwa pliku jest: ati-driver-instaler-8-7-x86.x86_64.run

I tak ma być, nie o ten nr chodzi (wew. 8,513 = zew. 8,7).

[mich@l2312]

I tak ma być, nie o ten nr chodzi (wew. 8,513 = zew. 8,7).

Czyli dobrze instaluję?

EDIT:
Mam mały problem. Zainstalowałem te sterowniki i po ponownym uruchomieniu pokazał mi się biały ekran. Jak odinstalować te sterowniki?

[sebo125]

Odpowiedź na forum, nie w tym temacie.