iPlus + ZTE MF100 = nie działa pod linuxem.

[KGS]

Witam, od dzisiaj jestem "szczesliwym" posiadaczem iplus z modemem pod usb ZTE MF100. Jednak niemoge tego modemu uruchomić pod ubuntu. Kiedyś konfigurowalem na ubuntu playa z jakims modeme pod usb i nie mialem problemu... Jakaś pomoc?
Zdaje mi się ze ubuntu wogóle nie wykrywa modemu, tylko nie wiem jak dokłądnie to sprawdzic...

[igotit4free]

Kod: Zaznacz cały

lsusb

ls /dev/ttyUSB*

abo włóż modem w gniazdo, popatrz na zegarek i odpal Menu główne/System/Administracja/Dziennik systemowy a tam zajrzyj do syslog`a co się wydrzyło o tej godzinie.
.

[KGS]

lsusb

Kod: Zaznacz cały

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b083 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 19d2:2000
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f3:0213 Elan Microelectronics Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ls /dev/ttyUSB*

Kod: Zaznacz cały

ls: nie ma dostÄ?pu do /dev/ttyUSB*: No such file or directory

dmesg

Kod: Zaznacz cały

[  130.448032] usb 1-5: new high speed USB device using ehci_hcd and address 3
[  130.593632] usb 1-5: configuration #1 chosen from 1 choice
[  130.646644] Initializing USB Mass Storage driver...
[  130.649008] usb-storage: device ignored
[  130.649085] usbcore: registered new interface driver usb-storage
[  130.649092] USB Mass Storage support registered.

[igotit4free]

To masz wyniki tychże komend u mnie, na MInt 6 Felicja (Ubuntu 8.10) dla ZTE MF626 & Play Online ...

Sep 11 15:17:01 mintu-desktop kernel: [ 103.760048] usb 1-3: new high speed USB device using ehci_hcd and address 3
Sep 11 15:17:01 mintu-desktop kernel: [ 103.929233] usb 1-3: configuration #1 chosen from 1 choice
Sep 11 15:17:02 mintu-desktop kernel: [ 104.226768] usbcore: registered new interface driver libusual
Sep 11 15:17:02 mintu-desktop kernel: [ 104.265466] Initializing USB Mass Storage driver...
Sep 11 15:17:02 mintu-desktop kernel: [ 104.267123] usbcore: registered new interface driver usb-storage
Sep 11 15:17:02 mintu-desktop kernel: [ 104.267551] USB Mass Storage support registered.
Sep 11 15:17:04 mintu-desktop kernel: [ 106.268709] usb 1-3: USB disconnect, address 3
Sep 11 15:17:04 mintu-desktop kernel: [ 106.512034] usb 1-3: new high speed USB device using ehci_hcd and address 4
Sep 11 15:17:04 mintu-desktop kernel: [ 106.657522] usb 1-3: configuration #1 chosen from 1 choice
Sep 11 15:17:04 mintu-desktop kernel: [ 106.695161] scsi4 : SCSI emulation for USB Mass Storage devices
Sep 11 15:17:04 mintu-desktop kernel: [ 106.952267] usbcore: registered new interface driver usbserial
Sep 11 15:17:04 mintu-desktop kernel: [ 106.952636] usbserial: USB Serial support registered for generic
Sep 11 15:17:04 mintu-desktop kernel: [ 106.952874] usbcore: registered new interface driver usbserial_generic
Sep 11 15:17:04 mintu-desktop kernel: [ 106.952879] usbserial: USB Serial Driver core
Sep 11 15:17:04 mintu-desktop kernel: [ 106.976210] usbserial: USB Serial support registered for GSM modem (1-port)
Sep 11 15:17:04 mintu-desktop kernel: [ 106.977165] option 1-3:1.0: GSM modem (1-port) converter detected
Sep 11 15:17:04 mintu-desktop kernel: [ 106.978139] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
Sep 11 15:17:04 mintu-desktop kernel: [ 106.978972] option 1-3:1.1: GSM modem (1-port) converter detected
Sep 11 15:17:04 mintu-desktop kernel: [ 106.979842] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
Sep 11 15:17:04 mintu-desktop kernel: [ 106.980753] option 1-3:1.3: GSM modem (1-port) converter detected
Sep 11 15:17:04 mintu-desktop kernel: [ 106.981692] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
Sep 11 15:17:04 mintu-desktop kernel: [ 106.982528] usbcore: registered new interface driver option
Sep 11 15:17:04 mintu-desktop kernel: [ 106.982534] option: USB Driver for GSM modems: v0.7.2
Sep 11 15:17:09 mintu-desktop kernel: [ 111.704260] scsi 4:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
Sep 11 15:17:09 mintu-desktop kernel: [ 111.732293] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Sep 11 15:17:09 mintu-desktop kernel: [ 111.732857] sd 4:0:0:0: Attached scsi generic sg2 type 0
Sep 11 15:17:09 mintu-desktop pppd[5473]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Sep 11 15:17:09 mintu-desktop kernel: [ 111.985624] PPP generic driver version 2.4.2
Sep 11 15:17:09 mintu-desktop pppd[5473]: pppd 2.4.4 started by root, uid 0
Sep 11 15:17:09 mintu-desktop pppd[5473]: Using interface ppp0
Sep 11 15:17:09 mintu-desktop pppd[5473]: Connect: ppp0 <--> /dev/ttyUSB2
Sep 11 15:17:09 mintu-desktop pppd[5473]: CHAP authentication succeeded
Sep 11 15:17:09 mintu-desktop pppd[5473]: CHAP authentication succeeded
Sep 11 15:17:09 mintu-desktop kernel: [ 112.175438] PPP BSD Compression module registered
Sep 11 15:17:10 mintu-desktop kernel: [ 112.404361] PPP Deflate Compression module registered
Sep 11 15:17:16 mintu-desktop pppd[5473]: Could not determine remote IP address: defaulting to 10.64.64.64
Sep 11 15:17:16 mintu-desktop pppd[5473]: local IP address 94.254.253.48
Sep 11 15:17:16 mintu-desktop pppd[5473]: remote IP address 10.64.64.64

lsusb

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05fe:1011 Chic Technology Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 19d2:0031
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

i

Kod: Zaznacz cały

ls /dev/ttyUSB*

daje

/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2

Ja instalowałem libusb i przy użyciu usb_modeswitch "przekonywałem" moje Ubuntu, że to urządzenie USB jest modemem a nie jest pendrajwem.

EDIT:
Zapomniałem o dmesg:

[ 104.265466] Initializing USB Mass Storage driver...
[ 104.267123] usbcore: registered new interface driver usb-storage
[ 104.267551] USB Mass Storage support registered.
[ 106.268709] usb 1-3: USB disconnect, address 3
[ 106.512034] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 106.657522] usb 1-3: configuration #1 chosen from 1 choice
[ 106.695161] scsi4 : SCSI emulation for USB Mass Storage devices
[ 106.700594] usb-storage: device found at 4
[ 106.700601] usb-storage: waiting for device to settle before scanning
[ 106.952267] usbcore: registered new interface driver usbserial
[ 106.952636] usbserial: USB Serial support registered for generic
[ 106.952874] usbcore: registered new interface driver usbserial_generic
[ 106.952879] usbserial: USB Serial Driver core
[ 106.976210] usbserial: USB Serial support registered for GSM modem (1-port)
[ 106.977165] option 1-3:1.0: GSM modem (1-port) converter detected
[ 106.978139] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 106.978972] option 1-3:1.1: GSM modem (1-port) converter detected
[ 106.979842] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 106.980753] option 1-3:1.3: GSM modem (1-port) converter detected
[ 106.981692] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 106.982528] usbcore: registered new interface driver option
[ 106.982534] option: USB Driver for GSM modems: v0.7.2
[ 111.701440] usb-storage: device scan complete
[ 111.704260] scsi 4:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 111.732293] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 111.732857] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 111.985624] PPP generic driver version 2.4.2
[ 112.175438] PPP BSD Compression module registered
[ 112.404361] PPP Deflate Compression module registered
[ 117.388537] ppdev0: registered pardevice
[ 117.436548] ppdev0: unregistered pardevice
[ 117.889630] ppdev0: registered pardevice
[ 117.936342] ppdev0: unregistered pardevice
[ 119.044289] ppdev0: registered pardevice
[ 119.092035] ppdev0: unregistered pardevice

Do konfiguracji użyłem NM 0.7.
.