Znikające okno programu Tvtime

[Paul119]

Zainstalowałem program Tvtime, lecz gdy chcę go włączyć, to okienko się wyświetla i nagle znika. Mam kartę TV pctv hybrid stick ultimate 330e. Jak wpisuję w terminalu takie polecenie: dmesg | grep card to wyświetla mi się to:
paul@paul-laptop:~$ dmesg | grep card
[ 0.428056] isapnp: Scanning for PnP cards...
[ 0.481826] EISA: Detected 0 cards.
[ 15.892416] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[ 353.084487] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[ 7481.422756] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[ 8536.504437] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)

Co muszę zrobić, aby jakoś uruchomić tą kartę tv?

[ka_o_3991]

i daj log z konsoli w

Kod: Zaznacz cały

i pokaż jeszcze co zwraca tvtime po odpaleniu w konsoli.

[Paul119]

Kod: Zaznacz cały

paul@paul-laptop:~$ tvtime
Uruchomione tvtime 1.0.2.
Czytanie konfiguracji z /etc/tvtime/tvtime.xml
Czytanie konfiguracji z /home/paul/.tvtime/tvtime.xml
videoinput: Driver won't tell us its norm: Zły argument
videoinput: Can't get tuner info: Zły argument

    Your capture card driver: uvcvideo [USB 2.0 Camera/usb-0000:00:1a.7-4/256]
    does not support full size studio-quality images required by tvtime.
    This is true for many low-quality webcams.  Please select a
    different video device for tvtime to use with the command line
    option --device.

Naruszenie ochrony pamięci
paul@paul-laptop:~$ 

[ilin]

Wrzuć na jakiegoś wkleja zawartość pliku

Kod: Zaznacz cały

var/log/dmesg

Do czego tę kartę chcesz używać do analogu czy dvb ?

[marcosx2]

Your capture card driver: uvcvideo [USB 2.0 Camera/usb-0000:00:1a.7-4/256]

Spróbuj zmienić V4LDevice w tvtime.xml na /dev/video1, albo uruchom tvtime z parametrem --device /dev/video1 - zależy "jakie video" to twój tuner.

[Paul119]

Ten tuner ma być używany do kablówki w akademiku. Tu jest chyba jeszcze analog.

Wrzuć na jakiegoś wkleja zawartość pliku

Kod: Zaznacz cały
var/log/dmesg



Do czego tę kartę chcesz używać do analogu czy dvb ?

Tzn. co mam zrobić bo nie za bardzo rozumie?

Spróbuj zmienić V4LDevice w tvtime.xml na /dev/video1, albo uruchom tvtime z parametrem --device /dev/video1 - zależy "jakie video" to twój tuner.

Jak mam to zrobić, jak ten program mi się nawet nie włącza. Wyskakuje czarne okienko po czym znika, jak je odpale z poziomu paska z "Programy". Jestem jeszcze zielony w instalacji czegokolwiek pod Ubuntu, więc proszę o wyrozumiałość. Czy moglibyście mi "łopatologiczne" wyjaśnić co i jak mam zrobić i gdzie kliknąć lub jakie polecenie wklepać do terminala?

Oto co wyświetla się po wpisaniu komendy "dmesg | grep -i9 tuner" :

Kod: Zaznacz cały

paul@paul-laptop:~$ dmesg | grep -i9 tuner
[12131.229687] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[12131.230457] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[12131.230463] em28xx #0: 
[12131.230465] 
[12131.230470] em28xx #0: The support for this board weren't valid yet.
[12131.230475] em28xx #0: Please send a report of having this working
[12131.230480] em28xx #0: not to V4L mailing list (and/or to other addresses)
[12131.230482] 
[12131.241071] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0)
[12131.250004] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[12131.261638] xc2028 2-0061: creating new instance
[12131.261644] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[12131.261656] usb 2-5: firmware: requesting xc3028-v27.fw
[12131.264498] xc2028 2-0061: Error: firmware xc3028-v27.fw not found.
[12131.264828] em28xx #0: Config register raw data: 0xd0
[12131.265772] em28xx #0: AC97 vendor ID = 0xffffffff
[12131.266435] em28xx #0: AC97 features = 0x6a90
[12131.266439] em28xx #0: Empia 202 AC97 audio processor detected
[12131.400441] tvp5150 2-005c: tvp5150am1 detected.
[12131.505842] em28xx #0: v4l2 driver version 0.1.2
[12131.596464] em28xx #0: V4L2 video device registered as /dev/video1

A po wpisaniu "ls -l /dev/video*" :

Kod: Zaznacz cały

paul@paul-laptop:~$ ls -l /dev/video*
crw-rw----+ 1 root video 81, 0 2011-03-24 18:47 /dev/video0
crw-rw----+ 1 root video 81, 1 2011-03-24 22:14 /dev/video1

A po wpisaniu "lsusb" :

Kod: Zaznacz cały

paul@paul-laptop:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 1bcf:0007 Sunplus Innovation Technology Inc. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2304:0226 Pinnacle Systems, Inc. [hex] PCTV 330e
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b013 Chicony Electronics Co., Ltd USB 2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Zaś jak wpisze "scantv -c /dev/video1 -C /dev/vbi0" to wyświetla się menu :

Kod: Zaznacz cały

please select your TV norm
   0: NTSC
   1: NTSC-M
   2: NTSC-M-JP
   3: NTSC-M-KR
   4: NTSC-443
   5: PAL
   6: PAL-BG
   7: PAL-H
   8: PAL-I
   9: PAL-DK
  10: PAL-M
  11: PAL-N
  12: PAL-Nc
  13: PAL-60
  14: SECAM
  15: SECAM-B

Wybieram 6 i wyświetla się:

Kod: Zaznacz cały

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia

I tu nie wiem co wybrać, bo jak wybiorę 1,6,16 to nie znajduje mi żadnych stacji. Może coś źle klikam. Pomóżcie.

[marcosx2]

W katalogu domowym masz ukryty katalog .tvtime (w nautilusie wciśnij ctrl+h to się pokarzą ukryte pliki i katalogi).

W katalogu .tvtime masz plik tvtime.xml i tam możesz zmienić v4ldevice na /dev/video1

Jeżeli nie ma tego pliku w katalogu domowym to jest w /etc/tvtime


albo:

Kod: Zaznacz cały

tvtime --device=/dev/video1

[ilin]

Po pierwsze

Kod: Zaznacz cały

xc2028 2-0061: Error: firmware xc3028-v27.fw not found

Nie masz firmware.

Po drugie odpalaj

Kod: Zaznacz cały

tvtime -d /dev/video1

[Paul119]

marcosx2 w tym folderze jest ten plik i gdy próbuję go zedytować w programie "gedit" to w pliku pojawia się takie coś:

Kod: Zaznacz cały

<?xml version="1.0"?>
<!DOCTYPE tvtime PUBLIC "-//tvtime//DTD tvtime 1.0//EN" "http://tvtime.sourceforge.net/DTD/tvtime1.dtd">
<tvtime xmlns="http://tvtime.sourceforge.net/DTD/">
  <option name="Matte" value="4:3"/>
</tvtime>

Gdzie w tym pliku coś zmienić?

ilin jak używam twojego polecenia:

Kod: Zaznacz cały

tvtime -d /dev/video1

to wyświetla mi się czarne okienko, po czym zaraz gaśnie. Tak samo się dzieje po użyciu polecenia podanego przez marcosx2 na dole posta.

Kod: Zaznacz cały

Po pierwsze

Kod: Zaznacz cały
    xc2028 2-0061: Error: firmware xc3028-v27.fw not found



Nie masz firmware.

Jak mam je zainstalować i co dokładnie?

[ilin]

W tym poście masz to samo firmware

viewtopic.php?f=136&t=86950

Wg niego go zainstaluj.
Firmware nie moduły.

[Paul119]

Firmware nie moduły.

Czyli co dokładnie mam zainstalować? Bo zrobiłem wszystko co napisał pustelnik0 i wyskakuje mi takie coś:

Kod: Zaznacz cały

paul@paul-laptop:~$ tvtime-scanner
Czytanie konfiguracji z /etc/tvtime/tvtime.xml
Czytanie konfiguracji z /home/paul/.tvtime/tvtime.xml
Skanowanie używając standardu TV PAL.
videoinput: Driver won't tell us its norm: Zły argument
videoinput: Can't get tuner info: Zły argument

    Your capture card driver: uvcvideo [USB 2.0 Camera/usb-0000:00:1a.7-4/256]
    does not support full size studio-quality images required by tvtime.
    This is true for many low-quality webcams.  Please select a
    different video device for tvtime to use with the command line
    option --device.

paul@paul-laptop:~$ 

Coś jest chyba jednak nie tak. Może źle umieszczam te dane:

Kod: Zaznacz cały

cx8800
cx88-blackbird
cx23885
cx88_alsa

w pliku tekstowym. Umieściłem je na samym początku pliku tekstowego. Proszę, powiedzcie co robię źle.

A po wpisaniu dmesg takie coś:

Kod: Zaznacz cały

[    0.379139]   alloc irq_desc for 17 on node -1
[    0.379142]   alloc kstat_irqs on node -1
[    0.379151] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.379158] pci 0000:00:1c.0: setting latency timer to 64
[    0.379171]   alloc irq_desc for 16 on node -1
[    0.379173]   alloc kstat_irqs on node -1
[    0.379178] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.379184] pci 0000:00:1c.1: setting latency timer to 64
[    0.379196]   alloc irq_desc for 18 on node -1
[    0.379198]   alloc kstat_irqs on node -1
[    0.379203] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.379209] pci 0000:00:1c.2: setting latency timer to 64
[    0.379221]   alloc irq_desc for 19 on node -1
[    0.379224]   alloc kstat_irqs on node -1
[    0.379228] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.379234] pci 0000:00:1c.3: setting latency timer to 64
[    0.379245] pci 0000:00:1e.0: setting latency timer to 64
[    0.379251] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.379254] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.379258] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.379261] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
[    0.379264] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[    0.379268] pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
[    0.379271] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
[    0.379274] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[    0.379277] pci_bus 0000:05: resource 0 io:  [0x4000-0x4fff]
[    0.379281] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff]
[    0.379284] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf5ffffff]
[    0.379287] pci_bus 0000:06: resource 0 io:  [0x5000-0x5fff]
[    0.379290] pci_bus 0000:06: resource 1 mem: [0xc8000000-0xc9ffffff]
[    0.379293] pci_bus 0000:06: resource 2 pref mem [0xcc000000-0xcdffffff]
[    0.379296] pci_bus 0000:08: resource 1 mem: [0xfc200000-0xfc2fffff]
[    0.379299] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.379302] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    0.379361] NET: Registered protocol family 2
[    0.379494] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.379947] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.380600] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.381019] TCP: Hash tables configured (established 131072 bind 65536)
[    0.381022] TCP reno registered
[    0.381172] NET: Registered protocol family 1
[    0.381205] pci 0000:00:02.0: Boot video device
[    0.381421] Simple Boot Flag at 0x36 set to 0x1
[    0.381648] cpufreq-nforce2: No nForce2 chipset.
[    0.381687] Scanning for low memory corruption every 60 seconds
[    0.381848] audit: initializing netlink socket (disabled)
[    0.381861] type=2000 audit(1301920130.379:1): initialized
[    0.394533] highmem bounce pool size: 64 pages
[    0.394540] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.396642] VFS: Disk quotas dquot_6.5.2
[    0.396730] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.397487] fuse init (API version 7.13)
[    0.397600] msgmni has been set to 1664
[    0.397890] alg: No test for stdrng (krng)
[    0.397964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.397969] io scheduler noop registered
[    0.397971] io scheduler anticipatory registered
[    0.397973] io scheduler deadline registered
[    0.398027] io scheduler cfq registered (default)
[    0.398257]   alloc irq_desc for 24 on node -1
[    0.398260]   alloc kstat_irqs on node -1
[    0.398277] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.398292] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.398492]   alloc irq_desc for 25 on node -1
[    0.398495]   alloc kstat_irqs on node -1
[    0.398506] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.398519] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.398713]   alloc irq_desc for 26 on node -1
[    0.398715]   alloc kstat_irqs on node -1
[    0.398727] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.398740] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.398943]   alloc irq_desc for 27 on node -1
[    0.398945]   alloc kstat_irqs on node -1
[    0.398956] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    0.398970] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.399104] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.399274] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.399455] ACPI: AC Adapter [ACAD] (off-line)
[    0.399538] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.399587] ACPI: Lid Switch [LID0]
[    0.399644] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.399648] ACPI: Power Button [PWRB]
[    0.399737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.399740] ACPI: Power Button [PWRF]
[    0.400628] ACPI: SSDT bf6d94fa 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.401323] ACPI: SSDT bf6d8e8b 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.408786] Monitor-Mwait will be used to enter C-1 state
[    0.416052] Monitor-Mwait will be used to enter C-2 state
[    0.416068] Marking TSC unstable due to TSC halts in idle
[    0.416169] processor LNXCPU:00: registered as cooling_device0
[    0.416707] ACPI: SSDT bf6d9732 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.417184] ACPI: SSDT bf6d9475 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.418555] Switching to clocksource hpet
[    0.419068] processor LNXCPU:01: registered as cooling_device1
[    0.428405] Freeing initrd memory: 7781k freed
[    0.445586] isapnp: Scanning for PnP cards...
[    0.447393] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.449161] brd: module loaded
[    0.449769] loop: module loaded
[    0.449878] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.450007] ata_piix 0000:00:1f.1: version 2.13
[    0.450024] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.450076] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.450186] scsi0 : ata_piix
[    0.450281] scsi1 : ata_piix
[    0.451051] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.451055] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.451532] Fixed MDIO Bus: probed
[    0.451580] PPP generic driver version 2.4.2
[    0.451630] tun: Universal TUN/TAP device driver, 1.6
[    0.451632] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.451705] ACPI: Battery Slot [BAT1] (battery present)
[    0.451765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.451794] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.451815] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.451819] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.451862] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.451910] ehci_hcd 0000:00:1a.7: debug port 1
[    0.455788] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.455808] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504800
[    0.469020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.469138] usb usb1: configuration #1 chosen from 1 choice
[    0.469174] hub 1-0:1.0: USB hub found
[    0.469184] hub 1-0:1.0: 4 ports detected
[    0.469259]   alloc irq_desc for 23 on node -1
[    0.469262]   alloc kstat_irqs on node -1
[    0.469269] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.469283] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.469288] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.469328] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.469371] ehci_hcd 0000:00:1d.7: debug port 1
[    0.473246] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.473263] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[    0.489018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.489107] usb usb2: configuration #1 chosen from 1 choice
[    0.489139] hub 2-0:1.0: USB hub found
[    0.489148] hub 2-0:1.0: 6 ports detected
[    0.489225] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.489247] uhci_hcd: USB Universal Host Controller Interface driver
[    0.489284] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.489293] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.489297] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.489340] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.489381] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    0.489495] usb usb3: configuration #1 chosen from 1 choice
[    0.489530] hub 3-0:1.0: USB hub found
[    0.489541] hub 3-0:1.0: 2 ports detected
[    0.489597]   alloc irq_desc for 21 on node -1
[    0.489599]   alloc kstat_irqs on node -1
[    0.489605] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.489613] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.489618] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.489655] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.489696] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    0.489811] usb usb4: configuration #1 chosen from 1 choice
[    0.489843] hub 4-0:1.0: USB hub found
[    0.489851] hub 4-0:1.0: 2 ports detected
[    0.489909] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.489917] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.489922] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.489961] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.489993] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.490108] usb usb5: configuration #1 chosen from 1 choice
[    0.490141] hub 5-0:1.0: USB hub found
[    0.490149] hub 5-0:1.0: 2 ports detected
[    0.490208] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.490215] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.490220] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.490258] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.490301] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.490416] usb usb6: configuration #1 chosen from 1 choice
[    0.490454] hub 6-0:1.0: USB hub found
[    0.490462] hub 6-0:1.0: 2 ports detected
[    0.490519] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.490527] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.490532] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.490581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.490612] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.490721] usb usb7: configuration #1 chosen from 1 choice
[    0.490753] hub 7-0:1.0: USB hub found
[    0.490761] hub 7-0:1.0: 2 ports detected
[    0.490883] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.514363] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.514373] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.514522] mice: PS/2 mouse device common for all mice
[    0.515481] rtc_cmos 00:07: RTC can wake from S4
[    0.515527] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.515563] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.515696] device-mapper: uevent: version 1.0.3
[    0.515833] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.515924] device-mapper: multipath: version 1.1.0 loaded
[    0.515927] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.516071] EISA: Probing bus 0 at eisa.0
[    0.516078] Cannot allocate resource for EISA slot 1
[    0.516082] Cannot allocate resource for EISA slot 2
[    0.516085] Cannot allocate resource for EISA slot 3
[    0.516087] Cannot allocate resource for EISA slot 4
[    0.516090] Cannot allocate resource for EISA slot 5
[    0.516106] EISA: Detected 0 cards.
[    0.516268] cpuidle: using governor ladder
[    0.516380] cpuidle: using governor menu
[    0.516918] TCP cubic registered
[    0.517135] NET: Registered protocol family 10
[    0.517742] lo: Disabled Privacy Extensions
[    0.518191] NET: Registered protocol family 17
[    0.519098] Using IPI No-Shortcut mode
[    0.519220] PM: Resume from disk failed.
[    0.519238] registered taskstats version 1
[    0.520077]   Magic number: 7:484:480
[    0.520176] rtc_cmos 00:07: setting system clock to 2011-04-04 12:28:51 UTC (1301920131)
[    0.520180] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.520182] EDD information not available.
[    0.533730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.624935] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, ED01, max UDMA/33
[    0.644326] ata1.00: configured for UDMA/33
[    0.801053] isapnp: No Plug & Play device found
[    0.804677] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N ED01 PQ: 0 ANSI: 5
[    0.815728] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.815732] Uniform CD-ROM driver Revision: 3.20
[    0.815857] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.815923] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.816048] Freeing unused kernel memory: 664k freed
[    0.816492] Write protecting the kernel text: 4692k
[    0.816559] Write protecting the kernel read-only data: 1844k
[    0.840247] udev: starting version 151
[    0.969936] ahci 0000:00:1f.2: version 3.0
[    0.969962] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.970023]   alloc irq_desc for 28 on node -1
[    0.970026]   alloc kstat_irqs on node -1
[    0.970041] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    0.970131] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.970136] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    0.970144] ahci 0000:00:1f.2: setting latency timer to 64
[    0.989246] scsi2 : ahci
[    0.993112] usb 1-4: new high speed USB device using ehci_hcd and address 4
[    1.015706] scsi3 : ahci
[    1.020107] scsi4 : ahci
[    1.020319] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 28
[    1.020324] ata4: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 28
[    1.020329] ata5: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 28
[    1.020941] tg3.c:v3.102 (September 1, 2009)
[    1.020977] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.020992] tg3 0000:06:00.0: setting latency timer to 64
[    1.133349] usb 1-4: configuration #1 chosen from 1 choice
[    1.244033] usb 2-5: new high speed USB device using ehci_hcd and address 2
[    1.318062] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:ec:08:c0:f2
[    1.318067] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[    1.318070] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.318073] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.340062] ata4: SATA link down (SStatus 0 SControl 300)
[    1.340091] ata5: SATA link down (SStatus 0 SControl 300)
[    1.340119] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.340742] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.340752] ata3.00: _GTF unexpected object type 0x1
[    1.341024] ata3.00: ATA-8: FUJITSU MHY2160BH, 0084000D, max UDMA/100
[    1.341028] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.341754] ata3.00: _GTF unexpected object type 0x1
[    1.342014] ata3.00: configured for UDMA/100
[    1.356217] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHY2160B 0084 PQ: 0 ANSI: 5
[    1.356429] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.356457] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.356528] sd 2:0:0:0: [sda] Write Protect is off
[    1.356532] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.356574] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.356864]  sda: sda1 sda3 sda4
[    1.384293] usb 2-5: configuration #1 chosen from 1 choice
[    1.406108] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.409785]   alloc irq_desc for 22 on node -1
[    1.409789]   alloc kstat_irqs on node -1
[    1.409798] ohci1394 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.466058] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fc200000-fc2007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.629031] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.752725] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    1.800556] usb 3-1: configuration #1 chosen from 1 choice
[    2.041027] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    2.206874] usb 4-1: configuration #1 chosen from 1 choice
[    2.741433] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f83ac40b55c]
[    9.482350] udev: starting version 151
[    9.504151] Adding 1015800k swap on /dev/sda4.  Priority:-1 extents:1 across:1015800k 
[    9.626559] Linux agpgart interface v0.103
[    9.894836] [drm] Initialized drm 1.1.0 20060810
[    9.896228] cfg80211: Calling CRDA to update world regulatory domain
[    9.899165] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    9.899584] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    9.906989] ricoh-mmc: Ricoh MMC Controller disabling driver
[    9.906993] ricoh-mmc: Copyright(c) Philip Langdale
[    9.907026] ricoh-mmc: Ricoh MMC controller found at 0000:08:06.2 [1180:0843] (rev 1)
[    9.907049] ricoh-mmc: Controller is now disabled.
[    9.911143] Linux video capture interface: v2.00
[    9.920547] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    9.928347] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[    9.936217] sdhci: Secure Digital Host Controller Interface driver
[    9.936220] sdhci: Copyright(c) Pierre Ossman
[    9.938608] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 19)
[    9.938632] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    9.939710] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input5
[    9.939883] usbcore: registered new interface driver uvcvideo
[    9.939935] USB Video Class driver (v0.1.0)
[    9.941841] cfg80211: World regulatory domain updated:
[    9.941846] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.941850] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.941853] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.941856] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.941859] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.941863] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.942442] Registered led device: mmc0::
[    9.943556] mmc0: SDHCI controller on PCI [0000:08:06.1] using PIO
[    9.979456] type=1505 audit(1301912940.956:2):  operation="profile_load" pid=622 name="/sbin/dhclient3"
[    9.980368] type=1505 audit(1301912940.956:3):  operation="profile_load" pid=622 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    9.980870] type=1505 audit(1301912940.956:4):  operation="profile_load" pid=622 name="/usr/lib/connman/scripts/dhclient-script"
[   10.062640] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.062648] i915 0000:00:02.0: setting latency timer to 64
[   10.069284]   alloc irq_desc for 29 on node -1
[   10.069290]   alloc kstat_irqs on node -1
[   10.069302] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[   10.069311] [drm] set up 7M of stolen space
[   10.081074] usbcore: registered new interface driver hiddev
[   10.100949] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   10.100953] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   10.101058] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.101074] iwl3945 0000:04:00.0: setting latency timer to 64
[   10.210577] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input6
[   10.210792] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[   10.210833] usbcore: registered new interface driver usbhid
[   10.210837] usbhid: v2.6:USB HID core driver
[   10.221272] [drm] initialized overlay support
[   10.231855] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   10.231861] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   10.234576]   alloc irq_desc for 30 on node -1
[   10.234580]   alloc kstat_irqs on node -1
[   10.234768] iwl3945 0000:04:00.0: irq 30 for MSI/MSI-X
[   10.314581] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   10.535918] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[   10.595350] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[   10.598590] em28xx #0: chip ID is em2882/em2883
[   10.670337] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[   10.764273] fb0: inteldrmfb frame buffer device
[   10.764277] registered panic notifier
[   10.774886] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[   10.774901] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[   10.774916] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[   10.774930] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[   10.774944] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.774958] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.774972] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[   10.774986] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[   10.775000] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[   10.775014] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[   10.775028] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 31 00 30 00
[   10.775042] em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 32 00 36 00 37 00 31 00 00 00
[   10.775056] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.775069] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.775083] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.775097] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   10.775113] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x93b3a8bf
[   10.775115] em28xx #0: EEPROM info:
[   10.775117] em28xx #0:	AC97 audio (5 sample rates)
[   10.775119] em28xx #0:	500mA max power
[   10.775122] em28xx #0:	Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[   10.775824] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[   10.775828] em28xx #0: 
[   10.775829] 
[   10.775907] em28xx #0: The support for this board weren't valid yet.
[   10.775953] em28xx #0: Please send a report of having this working
[   10.775999] em28xx #0: not to V4L mailing list (and/or to other addresses)
[   10.776000] 
[   10.845175] acpi device:07: registered as cooling_device2
[   10.845514] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   10.845596] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.845644] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.845707] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.845748] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.849688] vga16fb: initializing
[   10.849693] vga16fb: mapped to 0xc00a0000
[   10.849698] vga16fb: not registering due to another framebuffer present
[   10.861125] cx2388x blackbird driver version 0.0.7 loaded
[   10.861130] cx88/2: registering cx8802 driver, type: blackbird access: shared
[   10.949286] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0)
[   10.962086] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   10.973885] Console: switching to colour frame buffer device 160x50
[   11.113040] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[   11.184090] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000
[   11.197975] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   11.264691] xc2028 2-0061: creating new instance
[   11.264697] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[   11.264714] usb 2-5: firmware: requesting xc3028-v27.fw
[   11.264976] cx23885 driver version 0.0.2 loaded
[   11.267726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   11.328785] cx2388x alsa driver version 0.0.7 loaded
[   11.356227] type=1505 audit(1301912942.332:5):  operation="profile_replace" pid=924 name="/sbin/dhclient3"
[   11.357758] type=1505 audit(1301912942.336:6):  operation="profile_load" pid=923 name="/usr/share/gdm/guest-session/Xsession"
[   11.360002] type=1505 audit(1301912942.336:7):  operation="profile_replace" pid=924 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.360547] type=1505 audit(1301912942.336:8):  operation="profile_replace" pid=924 name="/usr/lib/connman/scripts/dhclient-script"
[   11.383257] type=1505 audit(1301912942.360:9):  operation="profile_load" pid=930 name="/usr/lib/cups/backend/cups-pdf"
[   11.383363] type=1505 audit(1301912942.360:10):  operation="profile_load" pid=926 name="/usr/bin/evince"
[   11.395078] lp: driver loaded but no devices found
[   11.396576] type=1505 audit(1301912942.372:11):  operation="profile_load" pid=930 name="/usr/sbin/cupsd"
[   11.415155] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   11.461080] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[   11.651289] iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   11.688213] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[   11.688464] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[   11.691098]   alloc irq_desc for 31 on node -1
[   11.691103]   alloc kstat_irqs on node -1
[   11.691142] tg3 0000:06:00.0: irq 31 for MSI/MSI-X
[   11.734258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.817065] iwl3945 0000:04:00.0: Radio disabled by HW RF Kill switch
[   11.920391] ppdev: user-space parallel port driver
[   12.469587] xc2028 2-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[   12.483960] xc2028 2-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[   12.669202] em28xx #0: Config register raw data: 0xd0
[   12.669942] em28xx #0: AC97 vendor ID = 0xffffffff
[   12.670329] em28xx #0: AC97 features = 0x6a90
[   12.670333] em28xx #0: Empia 202 AC97 audio processor detected
[   12.793456] tvp5150 2-005c: tvp5150am1 detected.
[   12.888833] em28xx #0: v4l2 driver version 0.1.2
[   12.975331] em28xx #0: V4L2 video device registered as /dev/video1
[   12.975335] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[   12.989132] usbcore: registered new interface driver em28xx
[   12.989534] em28xx driver loaded
[   13.027156] em28xx-audio.c: probing for em28x1 non standard usbaudio
[   13.027160] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[   13.031551] Em28xx: Initialized (Em28xx Audio Extension) extension
[   13.105459] tvp5150 2-005c: tvp5150am1 detected.
[   13.312907] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   13.312912] tg3: eth0: Flow control is on for TX and on for RX.
[   13.313175] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  172.052834] __ratelimit: 9 callbacks suppressed
[  172.052845] tvtime[1535]: segfault at 6b0 ip 0804d824 sp bfe9b5ec error 4 in tvtime[8048000+76000]

[ilin]

Pokaż

Kod: Zaznacz cały

ls /dev | grep video

[Paul119]

Kod: Zaznacz cały

paul@paul-laptop:~$     ls /dev | grep video
video0
video1
paul@paul-laptop:~$ 

[ilin]

Kod: Zaznacz cały

tvtime -d /dev/video1

/dev/video0 to kamera.

[Paul119]

Kod: Zaznacz cały

paul@paul-laptop:~$ /dev/video0 to kamera
bash: /dev/video0: Brak dostępu
paul@paul-laptop:~$ 

[ilin]

Masz uruchomić tvtime poleceniem

Kod: Zaznacz cały

tvtime -d /dev/video1

Poinformowałem Cię tylko że urządzenie /dev/video0 to kamerka.

[Paul119]

ilin powinienem Ci za to polecenie postawić flachę. Dziex wielkie w końcu działa. Jak tylko teraz ustawić, aby chodził dźwięk? Bo kanały wyszukało, a dźwięku nie ma. Jak wpiszę komendę alsamixer i zmienię kartę dźwiękową na em coś tam to wyskakuje takie coś:

Kod: Zaznacz cały

─ AlsaMixer v1.0.22 ──────────────────────────────┐
│ Card: Em28xx Audio                                   F1:  Help               │
│ Chip:                                                F2:  System information │
│ View: F3: Playback  F4: Capture  F5: All             F6:  Select sound card  │
│ Item:                                                Esc: Exit               │
│                                                                              │
│                                                                              │
│                                                                              │
│                This sound device does not have any controls.                 │
│                                                                   

Dodam jeszcze że jak kliknę strzałkami w lewo lub prawo, to wyskakuje w programie głośność i pisze że jest zerowa. Jak ja mogę zwiększyć?

[ilin]

Pokaż

Kod: Zaznacz cały

arecord -l

[Paul119]

Kod: Zaznacz cały

paul@paul-laptop:~$ arecord -l
**** Lista CAPTURE urządzeń ****
karta 0: Intel [HDA Intel], urządzenie 0: ALC861-VD Analog [ALC861-VD Analog]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0
karta 1: Em28xxAudio [Em28xx Audio], urządzenie 0: Em28xx Audio [Empia 28xx Capture]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0
paul@paul-laptop:~$ 

[ilin]

Przy uruchomionym tvtime wklej w terminal polecenie

Kod: Zaznacz cały

arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay -

Zobacz czy dźwięk się pojawi.