Kod: Zaznacz cały
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD2500BEVS-26UST0
Serial Number: WD-WXE708C25462
LU WWN Device Id: 5 0014ee 201bb1cf9
Firmware Version: 01.01A01
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jun 26 09:46:44 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 120) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 9180) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 893
3 Spin_Up_Time 0x0003 188 187 021 Pre-fail Always - 1558
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8523
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4199
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4740
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 89
193 Load_Cycle_Count 0x0032 183 183 000 Old_age Always - 52865
194 Temperature_Celsius 0x0022 093 092 000 Old_age Always - 54
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 2
SMART Error Log Version: 1
ATA Error Count: 480 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 480 occurred at disk power-on lifetime: 4197 hours (174 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 58 e4 c9 40 Error: UNC at LBA = 0x00c9e458 = 13231192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 90 20 62 2d 01 00 00:52:31.459 READ FPDMA QUEUED
61 10 88 d8 57 8d 00 00 00:52:31.459 WRITE FPDMA QUEUED
61 01 80 30 16 32 00 00 00:52:31.459 WRITE FPDMA QUEUED
60 1b 78 e0 66 e7 07 00 00:52:31.459 READ FPDMA QUEUED
60 80 70 50 e4 c9 07 00 00:52:31.459 READ FPDMA QUEUED
Error 479 occurred at disk power-on lifetime: 4197 hours (174 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 59 e4 c9 40 Error: WP at LBA = 0x00c9e459 = 13231193
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 00 68 f6 ff 07 00 00:49:31.606 WRITE FPDMA QUEUED
61 08 f8 00 e8 8c 00 00 00:49:31.606 WRITE FPDMA QUEUED
61 10 f0 60 08 00 08 00 00:49:31.606 WRITE FPDMA QUEUED
61 20 e8 b0 57 8d 00 00 00:49:31.606 WRITE FPDMA QUEUED
61 08 e0 40 32 f0 00 00 00:49:31.606 WRITE FPDMA QUEUED
Error 478 occurred at disk power-on lifetime: 4197 hours (174 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 58 e4 c9 40 Error: WP at LBA = 0x00c9e458 = 13231192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 20 b0 60 93 ff 08 00 00:46:22.908 WRITE FPDMA QUEUED
61 08 a8 08 e8 8c 00 00 00:46:22.908 WRITE FPDMA QUEUED
60 40 a0 ca 8b e9 00 00 00:46:22.908 READ FPDMA QUEUED
61 08 98 48 6f 88 00 00 00:46:22.907 WRITE FPDMA QUEUED
61 40 90 40 14 09 09 00 00:46:22.907 WRITE FPDMA QUEUED
Error 477 occurred at disk power-on lifetime: 4197 hours (174 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 59 e4 c9 40 Error: UNC at LBA = 0x00c9e459 = 13231193
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 80 50 e4 c9 07 00 00:46:15.672 READ FPDMA QUEUED
2f 00 01 10 00 00 00 00 00:46:15.672 READ LOG EXT
61 00 50 f0 54 8d 00 00 00:46:11.588 WRITE FPDMA QUEUED
61 00 48 f0 53 8d 00 00 00:46:11.588 WRITE FPDMA QUEUED
60 40 40 e0 fe 0a 08 00 00:46:11.586 READ FPDMA QUEUED
Error 476 occurred at disk power-on lifetime: 4197 hours (174 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 58 e4 c9 40 Error: WP at LBA = 0x00c9e458 = 13231192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 50 f0 54 8d 00 00 00:46:11.588 WRITE FPDMA QUEUED
61 00 48 f0 53 8d 00 00 00:46:11.588 WRITE FPDMA QUEUED
60 40 40 e0 fe 0a 08 00 00:46:11.586 READ FPDMA QUEUED
61 00 38 f0 52 8d 00 00 00:46:11.585 WRITE FPDMA QUEUED
61 00 30 f0 51 8d 00 00 00:46:11.585 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 80% 4199 130671704
# 2 Short offline Completed: read failure 90% 4198 130671704
# 3 Conveyance offline Completed: read failure 90% 4197 130671704
# 4 Short offline Completed: read failure 90% 4197 130671704
# 5 Extended offline Completed: read failure 90% 4197 130671704
# 6 Extended offline Aborted by host 80% 4196 -
# 7 Conveyance offline Completed without error 00% 4196 -
# 8 Short offline Completed without error 00% 4195 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sława Ukrajini!