Karta telewizyjna CTX-967 wgranie sterowników

Tutaj można zadać pytanie, jeśli Linuksa widzi się pierwszy raz w życiu ;)
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

Witam od jakiegoś czasu stałem się posiadaczem karty telewizyjnej Medion ctx-967.
Przeczytałem kilka strona jak wgrywać sterowniki ale nie bardzo mi to wychodzi.
Może ktoś napisać od czego zacząć.
Znalazłem strone producenta http://www.creatix.de/support/typ.php?tid=77&gid=6
Jest tam specyfikacja karty oraz sterowniki dla windowsa.
Proszę o pomoc w instalacji oraz konfiguracji.
Jakie polecenia będą pomocne w diagnozowaniu karty oraz sterownika ??

Karta jest na złączu expressCard
nie znalazłem jej
ani tu
http://linuxtv.org/hg/v4l-dvb/file/tip/ ... DLIST.bttv
ani tu
http://www.mjmwired.net/kernel/Document ... LIST.tuner
Awatar użytkownika
ilin
Zakręcona Traszka
Zakręcona Traszka
Posty: 793
Rejestracja: 20 lip 2007, 21:49
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: ilin »

Pokaż

Kod: Zaznacz cały

lspci -nnk
z podłączoną kartą oczywiscie.
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

Kod: Zaznacz cały

i@snp88:~/Inne/alsa/alsa-utils-1.0.25$ lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9600M GT] [10de:0649] (rev a1)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: nvidia
	Kernel modules: nvidia_current, nouveau, nvidiafb
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Kernel driver in use: ATL1E
	Kernel modules: atl1e
05:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
	Subsystem: Intel Corporation WiFi Link 5100 ABG [8086:1206]
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
mam nadzieje ze pomoże
Awatar użytkownika
ilin
Zakręcona Traszka
Zakręcona Traszka
Posty: 793
Rejestracja: 20 lip 2007, 21:49
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: ilin »

Na pewno miałeś podłączoną tę kartę ?

Na pci jej nie ma.
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

no własnie jest podłaczona bo sie nawet taka dioda na niej swieci to jest karta na expres card wsuwana w bok laptopa
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

Kod: Zaznacz cały

lspci -nnvv
(pokaż)
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

Proszę

Kod: Zaznacz cały

00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: d0000000-d2ffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 70e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 70c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at db305c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at db300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00004000-00005fff
	Memory behind bridge: da200000-db2fffff
	Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d9200000-da1fffff
	Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d8100000-d91fffff
	Prefetchable memory behind bridge: 00000000d5000000-00000000d5ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: d7000000-d80fffff
	Prefetchable memory behind bridge: 00000000d6000000-00000000d6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 70a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 7080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 7060 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 7040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at db305800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 45
	Region 0: I/O ports at 7108 [size=8]
	Region 1: I/O ports at 7114 [size=4]
	Region 2: I/O ports at 7100 [size=8]
	Region 3: I/O ports at 7110 [size=4]
	Region 4: I/O ports at 7020 [size=32]
	Region 5: Memory at db305000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at db306000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 7000 [size=32]
	Kernel modules: i2c-i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at db304000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9600M GT] [10de:0649] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 6000 [size=128]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia_current, nouveau, nvidiafb

02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
	Subsystem: Acer Incorporated [ALI] Device [1025:0146]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at da200000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at 4000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ATL1E
	Kernel modules: atl1e

05:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
	Subsystem: Intel Corporation WiFi Link 5100 ABG [8086:1206]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at d8100000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
Tego dziadostwa chyba nie widać na moje oko
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

To jest złącze PCI Express?
Wykonaj:

Kod: Zaznacz cały

sudo update-usbids && sudo update-pciids
i jeszcze raz:

Kod: Zaznacz cały

lsusb

Kod: Zaznacz cały

lspci -v
Daj również na jakiś hosting wynik:

Kod: Zaznacz cały

dmesg
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

to jest karta na złacze express card nie wiem jak ja powinien identyfikować linux
dokładnie taka karta
http://allegro.pl/nowy-tuner-tv-dvb-t-m ... 20799.html
wyniki polecen po wczesniejszym

Kod: Zaznacz cały

sudo update-usbids && sudo update-pciids

Kod: Zaznacz cały

lsusb
Bus 002 Device 004: ID 1058:0704 Western Digital Technologies, Inc. Passport External HDD
Bus 004 Device 002: ID 138a:0001 Validity Sensors, Inc. VFS101 Fingerprint Reader
Bus 007 Device 003: ID 0a5c:2101 Broadcom Corp. BCM2045 Bluetooth
Bus 007 Device 002: ID 064e:a117 Suyin Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kod: Zaznacz cały

lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: d0000000-d2ffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at 70e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at 70c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 19
	Memory at db305c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, fast devsel, latency 0, IRQ 47
	Memory at db300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00004000-00005fff
	Memory behind bridge: da200000-db2fffff
	Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d9200000-da1fffff
	Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: d8100000-d91fffff
	Prefetchable memory behind bridge: 00000000d5000000-00000000d5ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: d7000000-d80fffff
	Prefetchable memory behind bridge: 00000000d6000000-00000000d6ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 23
	I/O ports at 70a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at 7080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at 7060 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at 7040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at db305800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
	Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 45
	I/O ports at 7108 [size=8]
	I/O ports at 7114 [size=4]
	I/O ports at 7100 [size=8]
	I/O ports at 7110 [size=4]
	I/O ports at 7020 [size=32]
	Memory at db305000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: medium devsel, IRQ 11
	Memory at db306000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 7000 [size=32]
	Kernel modules: i2c-i801

00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: fast devsel, IRQ 11
	Memory at db304000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9600M GT] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at 6000 [size=128]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia_current, nouveau, nvidiafb

02:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
	Subsystem: Acer Incorporated [ALI] Device 0146
	Flags: bus master, fast devsel, latency 0, IRQ 48
	Memory at da200000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at 4000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ATL1E
	Kernel modules: atl1e

05:00.0 Network controller: Intel Corporation WiFi Link 5100
	Subsystem: Intel Corporation WiFi Link 5100 ABG
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at d8100000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

-- 21 paź 2012, o 21:48 --

wynik ostatniego polecenia daje w txt bo mi sie nie miesice w poscie

http://www.speedyshare.com/DSZuy/wynikk2.txt
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

:) :)
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

luk powiedz ze cieszysz sie bo coś zauwazyłeś :) i widać ta nieszczesna karte
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

snp88 pisze:luk powiedz ze cieszysz sie bo coś zauwazyłeś :) i widać ta nieszczesna karte
Nie wiem. Ja nic nie widzę... Ten suwak z lewej strony (zasilanie) włączony?

-- niedziela, 21 października 2012, 22:38 --

Złącze widać w dmesg ale nic na nim...
Wykonaj:

Kod: Zaznacz cały

sudo modprobe -r pciehp

Kod: Zaznacz cały

sudo modprobe pciehp pciehp_force=1
Ewentualnie:

Kod: Zaznacz cały

sudo modprobe acpiphp
I tamte wyniki wcześniejsze, sprawdź albo pokaż - może się pojawi (lspci najpewniej).
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

Karta jest włączona bo ten suwak jest podświetlany niebieską diodą wiec wygląda na to ,że jest podłączona.

Kod: Zaznacz cały

sudo modprobe -r pciehp
odpowiedz

Kod: Zaznacz cały

FATAL: Module pciehp is builtin
jak nazywa sie to zlacze w dmesg
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

Kod: Zaznacz cały

sudo gedit /etc/default/grub
Dopisz nową opcję

Kod: Zaznacz cały

pciehp.pciehp_force=1
pomiędzy " " w linii:
GRUB_CMDLINE_LINUX_DEFAULT=
Zapisz i:

Kod: Zaznacz cały

sudo update-grub
Edyta:
A to?

Kod: Zaznacz cały

sudo modprobe acpiphp
(może pomóc na brak widoczności niektórych kart)
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

grub zaktualizowany
komputer zresatrtowany

Kod: Zaznacz cały

sudo modprobe acpiphp
i za cholerę nigdzie nie widze tego dziadostwa
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

dmesg pokaż
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

http://www.speedyshare.com/FKTSX/wynik44.txt
Prosze ;) dzięki za cierpliwość
Awatar użytkownika
luk1don
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1768
Rejestracja: 07 lis 2008, 16:17
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: luk1don »

Jak to jest czip:

Kod: Zaznacz cały

 Philips Semiconductors SAA7160 (rev 02)
Nie ma raczej modułu w kernelu. Kompilacja sterownika...
Garść linków:
http://www.vdr-wiki.de/wiki/index.php/U ... VB_Treiber
Karta może tam inna, ale ten sam czip. Widać, że oprócz tego sterownika:
http://powarman.dyndns.org/hgwebdir.cgi ... b-saa716x/
Dają też swoje patche:
http://linuxtv.org/hg/~endriss/media_build_experimental
firmware i te sprawy...
Tylko że u ciebie nawet nie widać karty. Spróbuj zmienić slot pcie może coś w biosie.
Reszta może kolega ilin cię poprowadzi ;-)
Albo samemu się uczyć :-D
Niby były te moduły w kernelu kiedyś (w konfigu kernela może są do wyboru)
Popatrz sobie na specyfikację:
http://www.creatix.de/support/download/ ... 2_Spec.pdf
http://www.linuxtv.org/wiki/index.php/NXP_SAA716x
http://www.linuxtv.org/wiki/index.php/NXP_TDA1004x
http://www.linuxtv.org/wiki/index.php/N ... s_TDA182xx
Ostatnio zmieniony 22 paź 2012, 00:48 przez luk1don, łącznie zmieniany 1 raz.
Awatar użytkownika
snp88
Serdeczny Borsuk
Serdeczny Borsuk
Posty: 176
Rejestracja: 02 kwie 2012, 23:20
Płeć: Mężczyzna
Wersja Ubuntu: 12.10
Środowisko graficzne: Unity
Architektura: x86_64
Kontakt:

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: snp88 »

hmm mam aby jeden slot na te karty ;(
Awatar użytkownika
ilin
Zakręcona Traszka
Zakręcona Traszka
Posty: 793
Rejestracja: 20 lip 2007, 21:49
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Karta telewizyjna CTX-967 wgranie sterowników

Post autor: ilin »

Nie widac karty ani w lspci ani w dmesg.
Ja jej nie widzę ,tam tylko kamera jest.

Jak masz windowsa to spróbuj jakimś sposobem uzyskać ID tej karty.
To jest podstawa.
Żeby mieć wokół czego szukać.
Ostatnio zmieniony 07 lis 2012, 17:17 przez ilin, łącznie zmieniany 3 razy.
ODPOWIEDZ

Wróć do „Przedszkole Linuksa”

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 13 gości