Czasami wolniejsza mysz, klawiatura, ogólnie system

[Basildon]

Witam.
Przeszukałem net i znalazłem kilka wpisów o podobnym problemie, a nigdy rozwiązania. Otóż raz na kilka uruchomień nie da się pracować na Ubuntu, gdyż kursor myszki koszmarnie zwalnia. Wygląda to tak jakby system nie uruchomił się poprawnie, i przycinał moją pracę. Niby nic a praktycznie odechciewa się korzystać. Restart pomaga, ale wiadomo że po kilku uruchomieniach problem powróci.
Przeinstalowałem system i nic to nie dało.
Generalnie wszystko działa jak należy jedyne co zauważyłem, to przed pojawieniem się pulpitu system sprawdza dyski. Normalnie jest to ułamek sekundy, a czasami trwa to kilkanaście - kilkadziesiąt sekund. Po tym już wiem, że myszka będzie zacinać. Mysz jest na USB, przewodowa. Ponadto pisanie sprawia troch kłopotu. pisząc ten post kursor klawiatury take nie nadąża za moim pisaniem i gubi litery, szczególnie wymagające wciśnięcia dwóch klawiszy (duże litery i polki znaki).
Chciałbym się dowiedzieć jak zdiagnozować ten problem dokładnie i może jakie kroki podjąć by tego uniknąć. Podejrzewam, że nie jest to popularny problem, ale dość uciążliwy.
Z góry dziękuje za pomoc.

[Padowan]

Sprawdź w top (czy innym menadżerze zadań) jaki proces zabiera tyle procesora.

[Rgl]

Czy kiedy system jest tak spowolniony dysk cały czas pracuje?

[Basildon]

Sprawdź w top (czy innym menadżerze zadań) jaki proces zabiera tyle procesora.

Problem w tym, że nie mogę uruchomić żadnego menedżera zadań. Powinien być w System - Administracja, ale u mnie nie ma tego. Próbowałem zainstalować conky i top ale ich nie znajduje.

Co do dysku, to nie pracuje.

[Padowan]

top powinien być zainstalowany. Otwórz terminal i wpisz:

Kod: Zaznacz cały

top

Jeżeli wyskoczy, że nie można znaleźć programu to go zainstaluj:

Kod: Zaznacz cały

sudo apt-get install top

lub

Kod: Zaznacz cały

sudo apt-get install htop

Po instalacji uruchom w terminalu:

Kod: Zaznacz cały

top

lub

Kod: Zaznacz cały

htop

w zależnćci co zainstalowałeś.

Jeżeli nie możesz znaleźć terminalu to przytrzymaj ctr+alt+F2.

[Basildon]

Dzięki.
Niewiele w tym widzę, ale wydaje się, że nic nie zakłóca systemu aż tak bym miał takie problemy. Chyba, że Wy się czegoś doszukacie.

top - 17:28:36 up 2 min, 2 users, load average: 0.17, 0.14, 0.06
Tasks: 165 total, 1 running, 164 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3845996k total, 865588k used, 2980408k free, 41060k buffers
Swap: 0k total, 0k used, 0k free, 439432k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 24456 2424 1368 S 0 0.1 0:00.87 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0
5 root 20 0 0 0 0 S 0 0.0 0:00.21 kworker/u:0
6 root RT 0 0 0 0 S 0 0.0 0:00.04 migration/0
7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0
8 root RT 0 0 0 0 S 0 0.0 0:00.20 migration/1
9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0
10 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1
11 root 20 0 0 0 0 S 0 0.0 0:00.05 kworker/0:1
12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1
13 root RT 0 0 0 0 S 0 0.0 0:00.08 migration/2
14 root 20 0 0 0 0 S 0 0.0 0:00.03

Dla porównania, wskazania z normalnie działającego systemu:

top - 17:47:49 up 6 min, 2 users, load average: 0.97, 0.30, 0.12
Tasks: 165 total, 2 running, 163 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.8%us, 0.8%sy, 0.0%ni, 93.5%id, 1.8%wa, 0.0%hi, 0.1%si, 0.0%st
Mem: 3845996k total, 1115128k used, 2730868k free, 42072k buffers
Swap: 0k total, 0k used, 0k free, 570332k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1914 pavlo 20 0 570m 83m 35m S 6 2.2 0:01.85 chromium-browse
1506 pavlo 20 0 1311m 73m 28m S 4 2.0 0:06.05 compiz
1057 root 20 0 204m 22m 8296 S 3 0.6 0:02.87 Xorg
1346 pavlo 20 0 504m 13m 3464 S 2 0.3 0:00.64 gnome-keyring-d
1336 pavlo 20 0 27264 3000 624 S 1 0.1 0:00.51 dbus-daemon
2017 pavlo 20 0 516m 17m 11m S 1 0.5 0:00.25 gnome-terminal
1953 pavlo 20 0 879m 36m 15m S 1 1.0 0:00.38 chromium-browse
1349 pavlo 20 0 736m 18m 12m S 0 0.5 0:00.41 gnome-settings-
1581 pavlo 20 0 385m 10m 8028 S 0 0.3 0:00.22 bamfdaemon
1600 pavlo 20 0 520m 19m 10m S 0 0.5 0:00.49 unity-panel-ser
1945 pavlo 20 0 844m 32m 16m S 0 0.9 0:00.21 chromium-browse
2112 pavlo 20 0 17340 1332 956 R 0 0.0 0:00.02 top
1 root 20 0 24460 2412 1368 S 0 0.1 0:00.87 init

Wydaje mi się, że nie ma to związku z wydajnością.

[norvoles]

A pokaż co zwraca polecenie w czasie gdy system zwolni:

Kod: Zaznacz cały

dmesg

Żeby nie kopiować z terminala, wywołaj je tak:

Kod: Zaznacz cały

dmesg > dmesg.txt

i zamieść tu zawartość pliku dmesg.txt w tagach code.

Pokaż tez zawartość plików:

Kod: Zaznacz cały

/var/log/Xorg.0.log
/var/log/Xorg.0.log.old

najlepiej zaraz po wystąpieniu problemu.

[Basildon]

dmesg:

Kod: Zaznacz cały

[    0.577179] Switching to clocksource hpet
[    0.582227] AppArmor: AppArmor Filesystem Enabled
[    0.582254] pnp: PnP ACPI init
[    0.582269] ACPI: bus type pnp registered
[    0.582365] pnp 00:00: [bus 00-ff]
[    0.582367] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.582369] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.582370] pnp 00:00: [io  0x0d00-0xffff window]
[    0.582372] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.582374] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.582375] pnp 00:00: [mem 0xbc000000-0xdfffffff window]
[    0.582377] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.582444] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.582451] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.582453] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.582456] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.582458] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.582498] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.582500] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.582502] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.582503] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.582506] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.582533] pnp 00:02: [dma 4]
[    0.582535] pnp 00:02: [io  0x0000-0x000f]
[    0.582536] pnp 00:02: [io  0x0081-0x0083]
[    0.582537] pnp 00:02: [io  0x0087]
[    0.582538] pnp 00:02: [io  0x0089-0x008b]
[    0.582540] pnp 00:02: [io  0x008f]
[    0.582541] pnp 00:02: [io  0x00c0-0x00df]
[    0.582561] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.582568] pnp 00:03: [io  0x0070-0x0071]
[    0.582578] pnp 00:03: [irq 8]
[    0.582595] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.582601] pnp 00:04: [io  0x0061]
[    0.582618] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.582626] pnp 00:05: [io  0x00f0-0x00ff]
[    0.582630] pnp 00:05: [irq 13]
[    0.582648] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.582808] pnp 00:06: [io  0x03f8-0x03ff]
[    0.582813] pnp 00:06: [irq 4]
[    0.582815] pnp 00:06: [dma 0 disabled]
[    0.582863] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.583015] pnp 00:07: [io  0x02f8-0x02ff]
[    0.583020] pnp 00:07: [irq 3]
[    0.583021] pnp 00:07: [dma 0 disabled]
[    0.583083] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.583226] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.583228] pnp 00:08: [io  0x0a00-0x0adf]
[    0.583229] pnp 00:08: [io  0x0ae0-0x0aef]
[    0.583261] system 00:08: [io  0x0a00-0x0adf] has been reserved
[    0.583263] system 00:08: [io  0x0ae0-0x0aef] has been reserved
[    0.583265] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.583344] pnp 00:09: [io  0x0010-0x001f]
[    0.583346] pnp 00:09: [io  0x0022-0x002d]
[    0.583347] pnp 00:09: [io  0x0030-0x003f]
[    0.583348] pnp 00:09: [io  0x0044-0x005f]
[    0.583350] pnp 00:09: [io  0x0062-0x0063]
[    0.583351] pnp 00:09: [io  0x0065-0x006f]
[    0.583352] pnp 00:09: [io  0x0072-0x007f]
[    0.583353] pnp 00:09: [io  0x0080]
[    0.583354] pnp 00:09: [io  0x0084-0x0086]
[    0.583356] pnp 00:09: [io  0x0088]
[    0.583357] pnp 00:09: [io  0x008c-0x008e]
[    0.583358] pnp 00:09: [io  0x0090-0x009f]
[    0.583359] pnp 00:09: [io  0x00a2-0x00bf]
[    0.583361] pnp 00:09: [io  0x00e0-0x00ef]
[    0.583362] pnp 00:09: [io  0x04d0-0x04d1]
[    0.583363] pnp 00:09: [io  0x0800-0x087f]
[    0.583364] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.583366] pnp 00:09: [io  0x0500-0x057f]
[    0.583367] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.583370] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.583371] pnp 00:09: [mem 0xfed45000-0xfed89fff]
[    0.583373] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.583374] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
[    0.583419] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.583421] system 00:09: [io  0x0800-0x087f] has been reserved
[    0.583423] system 00:09: [io  0x0500-0x057f] has been reserved
[    0.583425] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.583427] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.583428] system 00:09: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.583430] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.583432] system 00:09: [mem 0xfed40000-0xfed8ffff] could not be reserved
[    0.583435] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.583473] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.583492] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.583542] pnp 00:0b: [io  0x0060]
[    0.583544] pnp 00:0b: [io  0x0064]
[    0.583545] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.583546] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.583578] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.583580] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.583582] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.583613] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.583644] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.583646] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.583792] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.583793] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    0.583795] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.583796] pnp 00:0d: [mem 0x00100000-0xbbffffff]
[    0.583797] pnp 00:0d: [mem 0xfed90000-0xffffffff]
[    0.583840] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.583842] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.583844] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.583845] system 00:0d: [mem 0x00100000-0xbbffffff] could not be reserved
[    0.583847] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.583850] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.583937] pnp: PnP ACPI: found 14 devices
[    0.583938] ACPI: ACPI bus type pnp unregistered
[    0.590350] PCI: max bus depth: 1 pci_try_num: 2
[    0.590376] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.590379] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.590381] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.590384] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.590387] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.590391] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.590395] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    0.590397] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.590401] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.590404] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.590409] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.590430] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.590434] pci 0000:00:1c.0: setting latency timer to 64
[    0.590439] pci 0000:00:1c.2: enabling device (0105 -> 0107)
[    0.590445] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.590448] pci 0000:00:1c.2: setting latency timer to 64
[    0.590453] pci 0000:00:1e.0: setting latency timer to 64
[    0.590456] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.590457] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.590459] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.590460] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.590462] pci_bus 0000:00: resource 8 [mem 0xbc000000-0xdfffffff]
[    0.590463] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.590465] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.590467] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.590469] pci_bus 0000:01: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.590470] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.590472] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.590474] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.590476] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.590477] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.590479] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.590481] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.590483] pci_bus 0000:03: resource 8 [mem 0xbc000000-0xdfffffff]
[    0.590484] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.590486] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.590488] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.590518] NET: Registered protocol family 2
[    0.590622] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.591313] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.593440] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.593696] TCP: Hash tables configured (established 524288 bind 65536)
[    0.593698] TCP reno registered
[    0.593707] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.593736] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.593833] NET: Registered protocol family 1
[    0.593848] pci 0000:00:02.0: Boot video device
[    0.593870] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.593896] pci 0000:00:1a.0: PCI INT A disabled
[    0.593911] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.593930] pci 0000:00:1d.0: PCI INT A disabled
[    0.593953] PCI: CLS 32 bytes, default 64
[    0.593955] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.593957] Placing 64MB software IO TLB between ffff8800b777a000 - ffff8800bb77a000
[    0.593958] software IO TLB at phys 0xb777a000 - 0xbb77a000
[    0.594357] audit: initializing netlink socket (disabled)
[    0.594364] type=2000 audit(1359018601.412:1): initialized
[    0.613207] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.614798] VFS: Disk quotas dquot_6.5.2
[    0.614838] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.615223] fuse init (API version 7.17)
[    0.615291] msgmni has been set to 7477
[    0.615569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.615593] io scheduler noop registered
[    0.615595] io scheduler deadline registered
[    0.615619] io scheduler cfq registered (default)
[    0.615771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.615788] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.615829] intel_idle: MWAIT substates: 0x1120
[    0.615830] intel_idle: v0.4 model 0x25
[    0.615831] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.615920] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.615924] ACPI: Power Button [PWRB]
[    0.615955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.615958] ACPI: Power Button [PWRF]
[    0.617140] ERST: Table is not found!
[    0.617142] GHES: HEST is not enabled!
[    0.617195] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.637510] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.697422] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.729815] Freeing initrd memory: 13876k freed
[    0.861134] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.900932] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.924716] Linux agpgart interface v0.103
[    0.924775] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.924849] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.925696] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.925821] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.926969] brd: module loaded
[    0.927518] loop: module loaded
[    0.927639] ata_piix 0000:00:1f.2: version 2.13
[    0.927659] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.927663] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.927692] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.927900] scsi0 : ata_piix
[    0.927966] scsi1 : ata_piix
[    0.928695] ata1: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 19
[    0.928699] ata2: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 19
[    0.928715] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.928718] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.928746] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.928892] scsi2 : ata_piix
[    0.928943] scsi3 : ata_piix
[    0.929495] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 19
[    0.929498] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 19
[    0.929543] pata_acpi 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.929565] pata_acpi 0000:02:00.0: setting latency timer to 64
[    0.929579] pata_acpi 0000:02:00.0: PCI INT A disabled
[    0.929787] Fixed MDIO Bus: probed
[    0.929799] tun: Universal TUN/TAP device driver, 1.6
[    0.929800] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.929843] PPP generic driver version 2.4.2
[    0.929923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.929935] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.929950] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.929953] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.929988] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.930010] ehci_hcd 0000:00:1a.0: debug port 2
[    0.933922] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    0.933935] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbef8000
[    0.948380] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.948496] hub 1-0:1.0: USB hub found
[    0.948501] hub 1-0:1.0: 2 ports detected
[    0.948556] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.948568] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.948571] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.948621] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.948644] ehci_hcd 0000:00:1d.0: debug port 2
[    0.952579] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    0.952593] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbef2000
[    0.968337] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.968441] hub 2-0:1.0: USB hub found
[    0.968443] hub 2-0:1.0: 2 ports detected
[    0.968495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.968505] uhci_hcd: USB Universal Host Controller Interface driver
[    0.968544] usbcore: registered new interface driver libusual
[    0.968578] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.968946] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.968952] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.969080] mousedev: PS/2 mouse device common for all mice
[    0.969196] rtc_cmos 00:03: RTC can wake from S4
[    0.969298] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.969327] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.969396] device-mapper: uevent: version 1.0.3
[    0.969451] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.969542] cpuidle: using governor ladder
[    0.969672] cpuidle: using governor menu
[    0.969674] EFI Variables Facility v0.08 2004-May-17
[    0.969962] TCP cubic registered
[    0.970048] NET: Registered protocol family 10
[    0.970460] NET: Registered protocol family 17
[    0.970463] Registering the dns_resolver key type
[    0.970595] PM: Hibernation image not present or could not be loaded.
[    0.970607] registered taskstats version 1
[    0.975805]   Magic number: 13:341:172
[    0.975863] acpi device:35: hash matches
[    0.975923] rtc_cmos 00:03: setting system clock to 2013-01-24 09:10:02 UTC (1359018602)
[    0.976828] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.976830] EDD information not available.
[    1.258140] ata4: SATA link down (SStatus 0 SControl 300)
[    1.268849] ata3: SATA link down (SStatus 0 SControl 300)
[    1.268875] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.399337] hub 1-1:1.0: USB hub found
[    1.399364] hub 1-1:1.0: 6 ports detected
[    1.407031] irq 16: nobody cared (try booting with the "irqpoll" option)
[    1.407034] Pid: 0, comm: swapper/1 Not tainted 3.2.0-35-generic #55-Ubuntu
[    1.407036] Call Trace:
[    1.407037]  <IRQ>  [<ffffffff810dc31d>] __report_bad_irq+0x3d/0xe0
[    1.407046]  [<ffffffff810dc5a5>] note_interrupt+0x135/0x190
[    1.407049]  [<ffffffff810d9e1a>] handle_irq_event_percpu+0xaa/0x210
[    1.407051]  [<ffffffff810d9fd1>] handle_irq_event+0x51/0x80
[    1.407053]  [<ffffffff810dcffa>] handle_fasteoi_irq+0x6a/0x110
[    1.407057]  [<ffffffff81016282>] handle_irq+0x22/0x40
[    1.407061]  [<ffffffff816680da>] do_IRQ+0x5a/0xe0
[    1.407065]  [<ffffffff8165d46e>] common_interrupt+0x6e/0x6e
[    1.407066]  <EOI>  [<ffffffff8109ceb4>] ? tick_program_event+0x24/0x30
[    1.407073]  [<ffffffff8136d4bd>] ? intel_idle+0xed/0x150
[    1.407075]  [<ffffffff8136d49f>] ? intel_idle+0xcf/0x150
[    1.407079]  [<ffffffff815082d1>] cpuidle_idle_call+0xc1/0x280
[    1.407081]  [<ffffffff8101322a>] cpu_idle+0xca/0x120
[    1.407085]  [<ffffffff8163aa9a>] start_secondary+0xd9/0xdb
[    1.407086] handlers:
[    1.407089] [<ffffffff814937b0>] usb_hcd_irq
[    1.407091] Disabling IRQ #16
[    1.510888] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.590682] Refined TSC clocksource calibration: 2925.999 MHz.
[    1.590689] Switching to clocksource tsc
[    1.643310] hub 2-1:1.0: USB hub found
[    1.643508] hub 2-1:1.0: 6 ports detected
[    1.722345] ata1.00: SATA link down (SStatus 0 SControl 300)
[    1.722358] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.733069] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.733079] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.750649] ata2.01: ATA-8: Hitachi HDP725032GLA360, GM3OA5CA, max UDMA/133
[    1.750654] ata2.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.766608] ata2.01: configured for UDMA/133
[    1.783978] ata1.01: ATA-7: ST3250620AS, 3.AAK, max UDMA/133
[    1.783983] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.850431] ata1.01: configured for UDMA/133
[    1.850723] scsi 0:0:1:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
[    1.850973] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.851025] sd 0:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.851157] sd 0:0:1:0: [sda] Write Protect is off
[    1.851160] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.851189] scsi 1:0:1:0: Direct-Access     ATA      Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[    1.851236] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.851339] sd 1:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.851374] sd 1:0:1:0: Attached scsi generic sg1 type 0
[    1.851401] sd 1:0:1:0: [sdb] Write Protect is off
[    1.851405] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.851437] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.873885] usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
[    1.882452]  sdb: sdb1 sdb2 < sdb5 >
[    1.883334] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.913683]  sda: sda1 < sda5 sda6 > sda2
[    1.914436] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.915717] Freeing unused kernel memory: 924k freed
[    1.915850] Write protecting the kernel read-only data: 12288k
[    1.919818] Freeing unused kernel memory: 1604k freed
[    1.922853] Freeing unused kernel memory: 1196k freed
[    1.937669] udevd[102]: starting version 175
[    1.958706] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.958740] pata_jmicron 0000:02:00.0: setting latency timer to 64
[    1.962125] scsi4 : pata_jmicron
[    1.963230] scsi5 : pata_jmicron
[    1.963690] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 18
[    1.963693] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 18
[    1.968922] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.968945] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.968977] r8169 0000:01:00.0: setting latency timer to 64
[    1.969030] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[    1.969456] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000650000, 40:61:86:93:15:27, XID 081000c0 IRQ 40
[    1.969460] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.125714] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[    2.141638] ata5.00: configured for UDMA/33
[    2.143238] scsi 4:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[    2.148905] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.148911] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.149121] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.149214] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    2.324772] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[    2.324907] generic-usb 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.3/input0
[    2.324925] usbcore: registered new interface driver usbhid
[    2.324927] usbhid: USB HID core driver
[    2.363106] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.400463] usb 1-1.5: new low-speed USB device number 4 using ehci_hcd
[    2.835380] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
[    2.835613] generic-usb 0003:045E:00F1.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1a.0-1.5/input0
[    3.996165] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input4
[    3.996578] generic-usb 0003:045E:00F1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1a.0-1.5/input1
[    4.167545] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd
[   11.522271] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.646845] udevd[352]: starting version 175
[   11.658916] lp: driver loaded but no devices found
[   11.669939] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   11.670300] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.670306] mei 0000:00:16.0: setting latency timer to 64
[   11.670372] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[   11.672745] [drm] Initialized drm 1.1.0 20060810
[   11.685146] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.685151] i915 0000:00:02.0: setting latency timer to 64
[   11.711267] type=1400 audit(1359018613.260:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=434 comm="apparmor_parser"
[   11.711666] type=1400 audit(1359018613.260:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=434 comm="apparmor_parser"
[   11.711899] type=1400 audit(1359018613.260:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=434 comm="apparmor_parser"
[   11.725771] Linux video capture interface: v2.00
[   11.726081] gspca_main: v2.14.0 registered
[   11.726438] gspca_main: zc3xx-2.14.0 probing 046d:08d7
[   11.739655] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[   11.739661] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.739663] [drm] Driver supports precise vblank timestamp query.
[   11.739701] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.189787] fbcon: inteldrmfb (fb0) is primary device
[   12.189924] Console: switching to colour frame buffer device 240x67
[   12.189954] fb0: inteldrmfb frame buffer device
[   12.189955] drm: registered panic notifier
[   12.190018] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.190101] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.190177] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   12.190201] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   12.236890] hda_codec: ALC889: BIOS auto-probing.
[   12.250773] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[   12.250867] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   12.250974] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   12.251056] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   12.251192] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.251262] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.251331] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.251399] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.251468] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.251536] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.261137] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[   12.261195] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[   12.560271] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[   12.564533] HDMI: detected monitor LG TV at connection type HDMI
[   12.564536] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
[   12.564540] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[   12.564544] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 192000, bits = 16 20 24
[   13.019274] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.151482] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.599075] init: failsafe main process (823) killed by TERM signal
[   13.621265] Bluetooth: Core ver 2.16
[   13.621337] NET: Registered protocol family 31
[   13.621339] Bluetooth: HCI device and connection manager initialized
[   13.621341] Bluetooth: HCI socket layer initialized
[   13.621343] Bluetooth: L2CAP socket layer initialized
[   13.621350] Bluetooth: SCO socket layer initialized
[   13.625246] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.625249] Bluetooth: BNEP filters: protocol multicast
[   13.625565] Bluetooth: RFCOMM TTY layer initialized
[   13.625569] Bluetooth: RFCOMM socket layer initialized
[   13.625571] Bluetooth: RFCOMM ver 1.11
[   13.633708] ppdev: user-space parallel port driver
[   13.655794] type=1400 audit(1359018615.208:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=926 comm="apparmor_parser"
[   13.656238] type=1400 audit(1359018615.208:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=926 comm="apparmor_parser"
[   13.659330] type=1400 audit(1359018615.212:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=928 comm="apparmor_parser"
[   13.660190] type=1400 audit(1359018615.212:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=929 comm="apparmor_parser"
[   13.660682] type=1400 audit(1359018615.212:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=929 comm="apparmor_parser"
[   13.660968] type=1400 audit(1359018615.212:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=929 comm="apparmor_parser"
[   13.666199] type=1400 audit(1359018615.220:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=932 comm="apparmor_parser"
[   13.774960] r8169 0000:01:00.0: eth0: link down
[   13.774965] r8169 0000:01:00.0: eth0: link down
[   13.775476] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.775919] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.017662] input: zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/input/input14
[   15.017838] usbcore: registered new interface driver zc3xx
[   15.041636] usbcore: registered new interface driver snd-usb-audio
[   16.569342] r8169 0000:01:00.0: eth0: link up
[   16.569697] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.633313] eth0: no IPv6 routers present

Przy tym drugim wyskakuje mi brak dostępu.