Ubuntu 12.04 ciągle się wiesza

Wyłącznie system! Wątpliwości dotyczące aplikacji proszę umieszczać niżej, w odpowiednich forach.
ODPOWIEDZ
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Witam,
Po kilku miesiącach chciałem jeszcze raz spróbować Linuksa, zainstalowałem 13.10, jednak ciągle się wieszał. Stwierdziłem, że to może być wina niestabilnej wersji, więc zainstalowałem 12.04, niestaty tutaj jest to samo...
Nie mam pojęcia co może być powodem, wiesza się niezależnie czego używam i co robię. Instaluję coś, wiesza się, przeglądam internet, wiesza się, używam jakiegoś programu, wiesza się...
Tylko dzisiaj zawiesił mi się jakieś 5 czy 6 razy.
Wygląda to tak, że myszka nagle zaczyna lagować a po chwili w ogóle nie mogę nią ruszać (ani zrobić nic innego, klawiatura też chyba nie działa) i muszę wyłączyć komputer ręcznie.

Sam nie znam się prawie w ogóle na Linuksie, więc mam nadzieję, że ktoś mi pomoże :P

lshw:

Kod: Zaznacz cały

       vendor: Acer
       physical id: 0
       serial: U01R100501169
       slot: To Be Filled By O.E.M.
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: P01-A3
          date: 12/16/2009
          size: 64KiB
          capacity: 960KiB
          capabilities: isa pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
     *-cpu
          description: CPU
          product: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz
          serial: To Be Filled By O.E.M.
          slot: CPU 1
          size: 1200MHz
          capacity: 2933MHz
          width: 64 bits
          clock: 133MHz
          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
          configuration: cores=2 enabledcores=2 threads=4
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1-Cache
             size: 128KiB
             capacity: 128KiB
             capabilities: internal write-through instruction
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2-Cache
             size: 512KiB
             capacity: 512KiB
             capabilities: internal write-through unified
        *-cache:2
             description: L3 cache
             physical id: 7
             slot: L3-Cache
             size: 4MiB
             capacity: 4MiB
             capabilities: internal write-back unified
     *-memory
          description: System Memory
          physical id: 14
          slot: System board or motherboard
          size: 6GiB
        *-bank:0
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: GU512303EP0202
             vendor: Hitachi
             physical id: 0
             serial: 00000000
             slot: DIMM0
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:1
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: GU502203EP0201
             vendor: Hitachi
             physical id: 1
             serial: 00000000
             slot: DIMM1
             size: 1GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:2
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: GU512303EP0202
             vendor: Hitachi
             physical id: 2
             serial: 00000000
             slot: DIMM2
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:3
             description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: GU502203EP0201
             vendor: Hitachi
             physical id: 3
             serial: 00000000
             slot: DIMM3
             size: 1GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
     *-pci:0
          description: Host bridge
          product: Core Processor DRAM Controller
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 12
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: Core Processor PCI Express x16 Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 12
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:40 ioport:d000(size=4096) memory:fa000000-fbefffff ioport:ce000000(size=301989888)
           *-display
                description: VGA compatible controller
                product: GT215 [GeForce GT 320]
                vendor: NVIDIA Corporation
                physical id: 0
                bus info: pci@0000:01:00.0
                version: a2
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
                configuration: driver=nouveau latency=0
                resources: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:ce000000-cfffffff ioport:dc00(size=128) memory:fbe80000-fbefffff
           *-multimedia
                description: Audio device
                product: High Definition Audio Controller
                vendor: NVIDIA Corporation
                physical id: 0.1
                bus info: pci@0000:01:00.1
                version: a1
                width: 32 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list
                configuration: driver=snd_hda_intel latency=0
                resources: irq:17 memory:fbe7c000-fbe7ffff
        *-communication
             description: Communication controller
             product: 5 Series/3400 Series Chipset HECI Controller
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei latency=0
             resources: irq:50 memory:f9fffc00-f9fffc0f
        *-network
             description: Ethernet interface
             product: 82578DC Gigabit Network Connection
             vendor: Intel Corporation
             physical id: 19
             bus info: pci@0000:00:19.0
             logical name: eth0
             version: 06
             serial: 90:fb:a6:48:40:d9
             capacity: 1Gbit/s
             width: 32 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.1.4-k firmware=0.12-5 latency=0 link=no multicast=yes port=twisted pair
             resources: irq:48 memory:f9fc0000-f9fdffff memory:f9ffc000-f9ffcfff ioport:cc00(size=32)
        *-usb:0
             description: USB controller
             product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:16 memory:f9ff6000-f9ff63ff
        *-multimedia
             description: Audio device
             product: 5 Series/3400 Series Chipset High Definition Audio
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:51 memory:f9ff0000-f9ff3fff
        *-pci:1
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:41 ioport:1000(size=4096) memory:c0000000-c01fffff ioport:c0200000(size=2097152)
        *-pci:2
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:42 ioport:2000(size=4096) memory:c0400000-c05fffff ioport:c0600000(size=2097152)
        *-pci:3
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 3
             vendor: Intel Corporation
             physical id: 1c.2
             bus info: pci@0000:00:1c.2
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:43 ioport:3000(size=4096) memory:c0800000-c09fffff ioport:c0a00000(size=2097152)
        *-pci:4
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 4
             vendor: Intel Corporation
             physical id: 1c.3
             bus info: pci@0000:00:1c.3
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:44 ioport:4000(size=4096) memory:c0c00000-c0dfffff ioport:c0e00000(size=2097152)
        *-pci:5
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@0000:00:1c.4
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:45 ioport:e000(size=4096) memory:fbf00000-fbffffff ioport:c1000000(size=2097152)
           *-firewire
                description: FireWire (IEEE 1394)
                product: VT6315 Series Firewire Controller
                vendor: VIA Technologies, Inc.
                physical id: 0
                bus info: pci@0000:06:00.0
                version: 00
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress ohci bus_master cap_list
                configuration: driver=firewire_ohci latency=0
                resources: irq:16 memory:fbfff800-fbffffff ioport:e800(size=256)
        *-pci:6
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 7
             vendor: Intel Corporation
             physical id: 1c.6
             bus info: pci@0000:00:1c.6
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:46 ioport:5000(size=4096) memory:c1200000-c13fffff ioport:c1400000(size=2097152)
        *-pci:7
             description: PCI bridge
             product: 5 Series/3400 Series Chipset PCI Express Root Port 8
             vendor: Intel Corporation
             physical id: 1c.7
             bus info: pci@0000:00:1c.7
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:47 ioport:6000(size=4096) memory:c1600000-c17fffff ioport:c1800000(size=2097152)
        *-usb:1
             description: USB controller
             product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:23 memory:f9ff4000-f9ff43ff
        *-pci:8
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: a6
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
        *-isa
             description: ISA bridge
             product: 5 Series Chipset LPC Interface Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             resources: irq:0
        *-storage
             description: SATA controller
             product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 06
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:49 ioport:c880(size=8) ioport:c800(size=4) ioport:c480(size=8) ioport:c400(size=4) ioport:c080(size=32) memory:f9fee000-f9fee7ff
        *-serial UNCLAIMED
             description: SMBus
             product: 5 Series/3400 Series Chipset SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 06
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
             resources: memory:f9fff800-f9fff8ff ioport:400(size=32)
     *-pci:1
          description: Host bridge
          product: Core Processor QuickPath Architecture Generic Non-core Registers
          vendor: Intel Corporation
          physical id: 101
          bus info: pci@0000:ff:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: Core Processor QuickPath Architecture System Address Decoder
          vendor: Intel Corporation
          physical id: 102
          bus info: pci@0000:ff:00.1
          version: 02
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: Core Processor QPI Link 0
          vendor: Intel Corporation
          physical id: 103
          bus info: pci@0000:ff:02.0
          version: 02
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: Core Processor QPI Physical 0
          vendor: Intel Corporation
          physical id: 104
          bus info: pci@0000:ff:02.1
          version: 02
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: Core Processor Reserved
          vendor: Intel Corporation
          physical id: 105
          bus info: pci@0000:ff:02.2
          version: 02
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: Core Processor Reserved
          vendor: Intel Corporation
          physical id: 106
          bus info: pci@0000:ff:02.3
          version: 02
          width: 32 bits
          clock: 33MHz
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVD A  DH16AASH
             vendor: ATAPI
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/cdrom1
             logical name: /dev/cdrw1
             logical name: /dev/dvd1
             logical name: /dev/dvdrw1
             logical name: /dev/sr0
             version: SA15
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-scsi:1
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: WDC WD10EADS-22M
             vendor: Western Digital
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/sda
             version: 01.0
             serial: WD-WCAV56926362
             size: 931GiB (1TB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 signature=000a1af7
           *-volume:0
                description: EXT4 volume
                vendor: Linux
                physical id: 1
                bus info: scsi@1:0.0.0,1
                logical name: /dev/sda1
                logical name: /
                version: 1.0
                serial: d5bdafd7-451c-4960-9a89-c1db4a07188a
                size: 925GiB
                capacity: 925GiB
                capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2013-11-11 12:43:10 filesystem=ext4 lastmountpoint=/ modified=2013-11-11 12:50:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2013-11-11 14:59:04 state=mounted
           *-volume:1
                description: Extended partition
                physical id: 2
                bus info: scsi@1:0.0.0,2
                logical name: /dev/sda2
                size: 6070MiB
                capacity: 6070MiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume
                   description: Linux swap / Solaris partition
                   physical id: 5
                   logical name: /dev/sda5
                   capacity: 6070MiB
                   capabilities: nofs
  *-power UNCLAIMED
       description: To Be Filled By O.E.M.
       product: To Be Filled By O.E.M.
       vendor: To Be Filled By O.E.M.
       physical id: 1
       version: To Be Filled By O.E.M.
       serial: To Be Filled By O.E.M.
       capacity: 32768mWh
  *-network
       description: Wireless interface
       physical id: 2
       bus info: usb@1:1.4
       logical name: wlan0
       serial: 00:0c:f6:81:d6:3b
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=3.8.0-33-generic firmware=0.29 ip=192.168.178.11 link=yes multicast=yes wireless=IEEE 802.11bgn
piotr@piotr-Aspire-X3900:~$
Ostatnio zmieniony 11 lis 2013, 15:57 przez Roku, łącznie zmieniany 1 raz.
Na górę
norvoles
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1113
Rejestracja: 04 sty 2008, 20:58
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: norvoles »

Przejrzyj katalog /var/log, siedzą tam logi systemowe. Zwróć szczególną uwagę na plik messages.log oraz logi Xorg. Jeśli nieogarniasz ich zawartości, wrzuć te pliki tutaj. Być może zawierają jakies przydatne informacje. No i oczywiście podaj konkretne dane swojego sprzętu.
Na górę
Awatar użytkownika
igotit4free
Przyjaciel
Przyjaciel
Posty: 6453
Rejestracja: 29 paź 2008, 22:51
Płeć: Mężczyzna
Architektura: x86_64
Lokalizacja: KRK

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: igotit4free »

Roku pisze:...
Wiesz, że nie napisałeś ani słowa o swoim sprzęcie?
Zrób to. Wyedytuj pierwszego posta i podaj wyniki

Kod: Zaznacz cały

lspci -k
albo

Kod: Zaznacz cały

sudo lshw

To jest normalna instalacja na dysku, żadna wirtualka albo Live?

Opis problemu jest niewystarczający bądź sens istnienia tematu jest znikomyW razie wątpliwości/zastrzeżeń odnośnie powyższej informacji skontaktuj się z moderatorem, który ją wstawił.
Windows 10 @ GA-P67A-D3-B3, i3-2100 3.10GHz, 8GB RAM, Gigabyte HD6850 1GB RAM
Android 7.0 @ Motorola Moto G4+
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Oczywiście nie ogarniam, więc wrzucę, ale nie mam pliku messages.log w var/log ani w żadnym folderze w var/log.

Xorg:

Kod: Zaznacz cały

[    19.805] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    19.805] X Protocol Version 11, Revision 0
[    19.805] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[    19.805] Current Operating System: Linux piotr-Aspire-X3900 3.8.0-33-generic #48~precise1-Ubuntu SMP Thu Oct 24 16:28:06 UTC 2013 x86_64
[    19.805] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=d5bdafd7-451c-4960-9a89-c1db4a07188a ro quiet splash vt.handoff=7
[    19.805] Build Date: 16 October 2013  04:46:41PM
[    19.805] xorg-server 2:1.13.3-0ubuntu6~precise3 (For technical support please see http://www.ubuntu.com/support) 
[    19.805] Current version of pixman: 0.24.4
[    19.805] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    19.805] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.805] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 11 14:59:13 2013
[    19.969] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.224] (==) No Layout section.  Using the first Screen section.
[    20.224] (==) No screen section available. Using defaults.
[    20.224] (**) |-->Screen "Default Screen Section" (0)
[    20.224] (**) |   |-->Monitor "<default monitor>"
[    20.224] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.224] (==) Automatically adding devices
[    20.224] (==) Automatically enabling devices
[    20.224] (==) Automatically adding GPU devices
[    20.287] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.287] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.287] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.309] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.309] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.309] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.309] (II) Loader magic: 0x7f3c9bbefc20
[    20.309] (II) Module ABI versions:
[    20.309] 	X.Org ANSI C Emulation: 0.4
[    20.309] 	X.Org Video Driver: 13.1
[    20.309] 	X.Org XInput driver : 18.0
[    20.309] 	X.Org Server Extension : 7.0
[    20.309] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.311] (--) PCI:*(0:1:0:0) 10de:0ca2:174b:2150 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    20.311] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.311] Initializing built-in extension Generic Event Extension
[    20.311] Initializing built-in extension SHAPE
[    20.311] Initializing built-in extension MIT-SHM
[    20.311] Initializing built-in extension XInputExtension
[    20.311] Initializing built-in extension XTEST
[    20.311] Initializing built-in extension BIG-REQUESTS
[    20.311] Initializing built-in extension SYNC
[    20.311] Initializing built-in extension XKEYBOARD
[    20.311] Initializing built-in extension XC-MISC
[    20.311] Initializing built-in extension SECURITY
[    20.311] Initializing built-in extension XINERAMA
[    20.311] Initializing built-in extension XFIXES
[    20.311] Initializing built-in extension RENDER
[    20.311] Initializing built-in extension RANDR
[    20.311] Initializing built-in extension COMPOSITE
[    20.311] Initializing built-in extension DAMAGE
[    20.311] Initializing built-in extension MIT-SCREEN-SAVER
[    20.311] Initializing built-in extension DOUBLE-BUFFER
[    20.311] Initializing built-in extension RECORD
[    20.311] Initializing built-in extension DPMS
[    20.311] Initializing built-in extension X-Resource
[    20.311] Initializing built-in extension XVideo
[    20.311] Initializing built-in extension XVideo-MotionCompensation
[    20.311] Initializing built-in extension XFree86-VidModeExtension
[    20.311] Initializing built-in extension XFree86-DGA
[    20.311] Initializing built-in extension XFree86-DRI
[    20.311] Initializing built-in extension DRI2
[    20.311] (II) LoadModule: "glx"
[    20.402] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.469] (II) Module glx: vendor="X.Org Foundation"
[    20.469] 	compiled for 1.13.3, module version = 1.0.0
[    20.469] 	ABI class: X.Org Server Extension, version 7.0
[    20.469] (==) AIGLX enabled
[    20.480] Loading extension GLX
[    20.480] (==) Matched nvidia as autoconfigured driver 0
[    20.480] (==) Matched nouveau as autoconfigured driver 1
[    20.480] (==) Matched nvidia as autoconfigured driver 2
[    20.480] (==) Matched nouveau as autoconfigured driver 3
[    20.480] (==) Matched vesa as autoconfigured driver 4
[    20.480] (==) Matched modesetting as autoconfigured driver 5
[    20.480] (==) Matched fbdev as autoconfigured driver 6
[    20.480] (==) Assigned the driver to the xf86ConfigLayout
[    20.480] (II) LoadModule: "nvidia"
[    20.481] (WW) Warning, couldn't open module nvidia
[    20.481] (II) UnloadModule: "nvidia"
[    20.481] (II) Unloading nvidia
[    20.481] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.481] (II) LoadModule: "nouveau"
[    20.481] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.641] (II) Module nouveau: vendor="X.Org Foundation"
[    20.641] 	compiled for 1.13.3, module version = 1.0.7
[    20.641] 	Module class: X.Org Video Driver
[    20.641] 	ABI class: X.Org Video Driver, version 13.1
[    20.641] (II) LoadModule: "vesa"
[    20.641] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.695] (II) Module vesa: vendor="X.Org Foundation"
[    20.695] 	compiled for 1.13.3, module version = 2.3.2
[    20.695] 	Module class: X.Org Video Driver
[    20.695] 	ABI class: X.Org Video Driver, version 13.1
[    20.695] (II) LoadModule: "modesetting"
[    20.695] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.739] (II) Module modesetting: vendor="X.Org Foundation"
[    20.739] 	compiled for 1.13.3, module version = 0.7.0
[    20.739] 	Module class: X.Org Video Driver
[    20.739] 	ABI class: X.Org Video Driver, version 13.1
[    20.739] (II) LoadModule: "fbdev"
[    20.739] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.046] (II) Module fbdev: vendor="X.Org Foundation"
[    21.046] 	compiled for 1.13.3, module version = 0.4.3
[    21.046] 	Module class: X.Org Video Driver
[    21.046] 	ABI class: X.Org Video Driver, version 13.1
[    21.046] (==) Matched nvidia as autoconfigured driver 0
[    21.046] (==) Matched nouveau as autoconfigured driver 1
[    21.046] (==) Matched nvidia as autoconfigured driver 2
[    21.046] (==) Matched nouveau as autoconfigured driver 3
[    21.046] (==) Matched vesa as autoconfigured driver 4
[    21.046] (==) Matched modesetting as autoconfigured driver 5
[    21.046] (==) Matched fbdev as autoconfigured driver 6
[    21.046] (==) Assigned the driver to the xf86ConfigLayout
[    21.046] (II) LoadModule: "nvidia"
[    21.047] (WW) Warning, couldn't open module nvidia
[    21.047] (II) UnloadModule: "nvidia"
[    21.047] (II) Unloading nvidia
[    21.047] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    21.047] (II) LoadModule: "nouveau"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.047] (II) Module nouveau: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 1.0.7
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "nouveau"
[    21.047] (II) Unloading nouveau
[    21.047] (II) Failed to load module "nouveau" (already loaded, 0)
[    21.047] (II) LoadModule: "vesa"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.047] (II) Module vesa: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 2.3.2
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "vesa"
[    21.047] (II) Unloading vesa
[    21.047] (II) Failed to load module "vesa" (already loaded, 0)
[    21.047] (II) LoadModule: "modesetting"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.047] (II) Module modesetting: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 0.7.0
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "modesetting"
[    21.047] (II) Unloading modesetting
[    21.047] (II) Failed to load module "modesetting" (already loaded, 0)
[    21.047] (II) LoadModule: "fbdev"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.047] (II) Module fbdev: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 0.4.3
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "fbdev"
[    21.047] (II) Unloading fbdev
[    21.047] (II) Failed to load module "fbdev" (already loaded, 0)
[    21.047] (II) NOUVEAU driver Date:   Wed Mar 27 09:50:03 2013 +0100
[    21.047] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.047] 	RIVA TNT        (NV04)
[    21.047] 	RIVA TNT2       (NV05)
[    21.047] 	GeForce 256     (NV10)
[    21.047] 	GeForce 2       (NV11, NV15)
[    21.047] 	GeForce 4MX     (NV17, NV18)
[    21.047] 	GeForce 3       (NV20)
[    21.047] 	GeForce 4Ti     (NV25, NV28)
[    21.047] 	GeForce FX      (NV3x)
[    21.047] 	GeForce 6       (NV4x)
[    21.047] 	GeForce 7       (G7x)
[    21.047] 	GeForce 8       (G8x)
[    21.047] 	GeForce GTX 200 (NVA0)
[    21.047] 	GeForce GTX 400 (NVC0)
[    21.047] (II) VESA: driver for VESA chipsets: vesa
[    21.047] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.047] (II) FBDEV: driver for framebuffer: fbdev
[    21.047] (++) using VT number 7

[    21.082] (II) [drm] nouveau interface version: 1.1.0
[    21.082] (WW) Falling back to old probe method for vesa
[    21.082] (WW) Falling back to old probe method for modesetting
[    21.082] (WW) Falling back to old probe method for fbdev
[    21.082] (II) Loading sub module "fbdevhw"
[    21.082] (II) LoadModule: "fbdevhw"
[    21.083] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.108] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.108] 	compiled for 1.13.3, module version = 0.0.2
[    21.108] 	ABI class: X.Org Video Driver, version 13.1
[    21.108] (II) Loading sub module "dri"
[    21.108] (II) LoadModule: "dri"
[    21.108] (II) Module "dri" already built-in
[    21.108] (II) NOUVEAU(0): Loaded DRI module
[    21.109] (--) NOUVEAU(0): Chipset: "NVIDIA NVa3"
[    21.109] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.109] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    21.109] (==) NOUVEAU(0): RGB weight 888
[    21.109] (==) NOUVEAU(0): Default visual is TrueColor
[    21.109] (==) NOUVEAU(0): Using HW cursor
[    21.109] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    21.109] (==) NOUVEAU(0): Page flipping enabled
[    21.109] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    21.163] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    21.165] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    21.167] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    21.195] (II) NOUVEAU(0): EDID for output DVI-I-1
[    21.195] (II) NOUVEAU(0): Manufacturer: ACR  Model: d0  Serial#: 5278506
[    21.195] (II) NOUVEAU(0): Year: 2010  Week: 5
[    21.195] (II) NOUVEAU(0): EDID Version: 1.3
[    21.195] (II) NOUVEAU(0): Digital Display Input
[    21.195] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    21.195] (II) NOUVEAU(0): Gamma: 2.20
[    21.195] (II) NOUVEAU(0): DPMS capabilities: Off
[    21.195] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.195] (II) NOUVEAU(0): First detailed timing is preferred mode
[    21.195] (II) NOUVEAU(0): redX: 0.644 redY: 0.336   greenX: 0.301 greenY: 0.611
[    21.195] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    21.195] (II) NOUVEAU(0): Supported established timings:
[    21.195] (II) NOUVEAU(0): 720x400@70Hz
[    21.195] (II) NOUVEAU(0): 640x480@60Hz
[    21.195] (II) NOUVEAU(0): 640x480@67Hz
[    21.195] (II) NOUVEAU(0): 800x600@56Hz
[    21.195] (II) NOUVEAU(0): 800x600@60Hz
[    21.195] (II) NOUVEAU(0): 1024x768@60Hz
[    21.195] (II) NOUVEAU(0): 1024x768@70Hz
[    21.195] (II) NOUVEAU(0): Manufacturer's mask: 0
[    21.195] (II) NOUVEAU(0): Supported standard timings:
[    21.195] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    21.195] (II) NOUVEAU(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    21.195] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.195] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    21.195] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    21.195] (II) NOUVEAU(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    21.195] (II) NOUVEAU(0): Supported detailed timing:
[    21.195] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    21.195] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    21.195] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    21.195] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    21.195] (II) NOUVEAU(0): Monitor name: Acer P235H
[    21.195] (II) NOUVEAU(0): Serial No: LH10W0054301
[    21.195] (II) NOUVEAU(0): EDID (in hex):
[    21.195] (II) NOUVEAU(0): 	00ffffffffffff000472d0002a8b5000
[    21.195] (II) NOUVEAU(0): 	0514010380331d782ac285a4564d9c25
[    21.195] (II) NOUVEAU(0): 	125054b30c00714f810081809500b300
[    21.195] (II) NOUVEAU(0): 	d1c001010101023a801871382d40582c
[    21.195] (II) NOUVEAU(0): 	4500fe1f1100001e000000fd00384b1e
[    21.195] (II) NOUVEAU(0): 	5311000a202020202020000000fc0041
[    21.195] (II) NOUVEAU(0): 	6365722050323335480a2020000000ff
[    21.195] (II) NOUVEAU(0): 	004c48313057303035343330310a00b9
[    21.195] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    21.196] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    21.196] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.198] (II) NOUVEAU(0): EDID for output VGA-1
[    21.199] (II) NOUVEAU(0): EDID for output HDMI-1
[    21.199] (II) NOUVEAU(0): Output DVI-I-1 connected
[    21.199] (II) NOUVEAU(0): Output VGA-1 disconnected
[    21.199] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    21.199] (II) NOUVEAU(0): Using exact sizes for initial modes
[    21.200] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[    21.200] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.200] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    21.200] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    21.200] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    21.200] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    21.200] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    21.200] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    21.200] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.200] (==) NOUVEAU(0): DPI set to (96, 96)
[    21.200] (II) Loading sub module "fb"
[    21.200] (II) LoadModule: "fb"
[    21.200] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.228] (II) Module fb: vendor="X.Org Foundation"
[    21.228] 	compiled for 1.13.3, module version = 1.0.0
[    21.228] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.228] (II) Loading sub module "exa"
[    21.228] (II) LoadModule: "exa"
[    21.228] (II) Loading /usr/lib/xorg/modules/libexa.so
[    21.331] (II) Module exa: vendor="X.Org Foundation"
[    21.331] 	compiled for 1.13.3, module version = 2.6.0
[    21.331] 	ABI class: X.Org Video Driver, version 13.1
[    21.331] (II) Loading sub module "shadowfb"
[    21.331] (II) LoadModule: "shadowfb"
[    21.331] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    21.419] (II) Module shadowfb: vendor="X.Org Foundation"
[    21.419] 	compiled for 1.13.3, module version = 1.0.0
[    21.419] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.419] (II) UnloadModule: "vesa"
[    21.419] (II) Unloading vesa
[    21.419] (II) UnloadModule: "modesetting"
[    21.419] (II) Unloading modesetting
[    21.419] (II) UnloadModule: "fbdev"
[    21.419] (II) Unloading fbdev
[    21.419] (II) UnloadSubModule: "fbdevhw"
[    21.419] (II) Unloading fbdevhw
[    21.419] (--) Depth 24 pixmap format is 32 bpp
[    21.421] (II) NOUVEAU(0): Opened GPU channel 0
[    21.430] (II) NOUVEAU(0): [DRI2] Setup complete
[    21.430] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    21.430] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    21.433] (II) EXA(0): Driver allocated offscreen pixmaps
[    21.433] (II) EXA(0): Driver registered support for the following operations:
[    21.433] (II)         Solid
[    21.433] (II)         Copy
[    21.433] (II)         Composite (RENDER acceleration)
[    21.433] (II)         UploadToScreen
[    21.433] (II)         DownloadFromScreen
[    21.433] (==) NOUVEAU(0): Backing store disabled
[    21.433] (==) NOUVEAU(0): Silken mouse enabled
[    21.433] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    21.433] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    21.433] (==) NOUVEAU(0): DPMS enabled
[    21.433] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.434] (--) RandR disabled
[    23.172] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.172] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.172] (II) AIGLX: enabled GLX_ARB_create_context
[    23.172] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.172] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.172] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.172] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.173] (II) AIGLX: Loaded and initialized nouveau
[    23.173] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.177] (II) NOUVEAU(0): NVEnterVT is called.
[    23.178] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    23.178] resize called 1920 1080
[    23.283] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    23.306] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    23.306] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.306] (II) LoadModule: "evdev"
[    23.306] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.346] (II) Module evdev: vendor="X.Org Foundation"
[    23.346] 	compiled for 1.13.3, module version = 2.7.3
[    23.346] 	Module class: X.Org XInput Driver
[    23.346] 	ABI class: X.Org XInput driver, version 18.0
[    23.346] (II) Using input driver 'evdev' for 'Power Button'
[    23.346] (**) Power Button: always reports core events
[    23.346] (**) evdev: Power Button: Device: "/dev/input/event1"
[    23.346] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.346] (--) evdev: Power Button: Found keys
[    23.346] (II) evdev: Power Button: Configuring as keyboard
[    23.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    23.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.346] (**) Option "xkb_rules" "evdev"
[    23.346] (**) Option "xkb_model" "pc105"
[    23.346] (**) Option "xkb_layout" "pl"
[    23.348] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    23.358] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    23.358] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.358] (II) Using input driver 'evdev' for 'Power Button'
[    23.358] (**) Power Button: always reports core events
[    23.358] (**) evdev: Power Button: Device: "/dev/input/event0"
[    23.358] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.358] (--) evdev: Power Button: Found keys
[    23.358] (II) evdev: Power Button: Configuring as keyboard
[    23.358] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    23.358] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    23.358] (**) Option "xkb_rules" "evdev"
[    23.358] (**) Option "xkb_model" "pc105"
[    23.358] (**) Option "xkb_layout" "pl"
[    23.358] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    23.358] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.360] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event2)
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "evdev keyboard catchall"
[    23.360] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4004'
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: Device: "/dev/input/event2"
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Vendor 0x46d Product 0xc52b
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found 1 mouse buttons
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found scroll wheel(s)
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found relative axes
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing relative x/y axes to exist.
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found absolute axes
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing absolute x/y axes to exist.
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found keys
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as mouse
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as keyboard
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Adding scrollwheel support
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: YAxisMapping: buttons 4 and 5
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input2/event2"
[    23.360] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 8)
[    23.360] (**) Option "xkb_rules" "evdev"
[    23.360] (**) Option "xkb_model" "pc105"
[    23.360] (**) Option "xkb_layout" "pl"
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: initialized for relative axes.
[    23.360] (WW) evdev: Logitech Unifying Device. Wireless PID:4004: ignoring absolute axes.
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) keeping acceleration scheme 1
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration profile 0
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[    23.360] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event3)
[    23.360] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[    23.360] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[    23.360] (**) HP HP Link-5 micro dongle: always reports core events
[    23.360] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event3"
[    23.360] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[    23.360] (--) evdev: HP HP Link-5 micro dongle: Found keys
[    23.360] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[    23.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3/event3"
[    23.361] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 9)
[    23.361] (**) Option "xkb_rules" "evdev"
[    23.361] (**) Option "xkb_model" "pc105"
[    23.361] (**) Option "xkb_layout" "pl"
[    23.361] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event4)
[    23.361] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev pointer catchall"
[    23.361] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[    23.361] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[    23.361] (**) HP HP Link-5 micro dongle: always reports core events
[    23.361] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event4"
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found 9 mouse buttons
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found scroll wheel(s)
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found relative axes
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found x and y relative axes
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found absolute axes
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Forcing absolute x/y axes to exist.
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found keys
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Configuring as mouse
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Adding scrollwheel support
[    23.361] (**) evdev: HP HP Link-5 micro dongle: YAxisMapping: buttons 4 and 5
[    23.361] (**) evdev: HP HP Link-5 micro dongle: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.361] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4/event4"
[    23.361] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 10)
[    23.361] (**) Option "xkb_rules" "evdev"
[    23.361] (**) Option "xkb_model" "pc105"
[    23.361] (**) Option "xkb_layout" "pl"
[    23.361] (II) evdev: HP HP Link-5 micro dongle: initialized for relative axes.
[    23.361] (WW) evdev: HP HP Link-5 micro dongle: ignoring absolute axes.
[    23.361] (**) HP HP Link-5 micro dongle: (accel) keeping acceleration scheme 1
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration profile 0
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration factor: 2.000
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration threshold: 4
[    23.362] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event10)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event11)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event12)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event13)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event7)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event9)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device Wacom Bamboo Craft Pen (/dev/input/event5)
[    23.363] (**) Wacom Bamboo Craft Pen: Applying InputClass "evdev tablet catchall"
[    23.363] (**) Wacom Bamboo Craft Pen: Applying InputClass "Wacom class"
[    23.363] (II) LoadModule: "wacom"
[    23.363] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    23.364] (II) Module wacom: vendor="X.Org Foundation"
[    23.364] 	compiled for 1.13.3, module version = 0.19.0
[    23.364] 	Module class: X.Org XInput Driver
[    23.364] 	ABI class: X.Org XInput driver, version 18.0
[    23.364] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Pen'
[    23.364] (**) Wacom Bamboo Craft Pen: always reports core events
[    23.364] (**) Option "Device" "/dev/input/event5"
[    23.364] (II) Wacom Bamboo Craft Pen: type not specified, assuming 'stylus'.
[    23.364] (II) Wacom Bamboo Craft Pen: other types will be automatically added.
[    23.364] (--) Wacom Bamboo Craft Pen stylus: using pressure threshold of 27 for button 1
[    23.364] (--) Wacom Bamboo Craft Pen stylus: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
[    23.364] (II) Wacom Bamboo Craft Pen stylus: hotplugging dependent devices.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'cursor' for this device.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'touch' for this device.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'pad' for this device.
[    23.365] (II) Wacom Bamboo Craft Pen stylus: hotplugging completed.
[    23.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5/event5"
[    23.370] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Pen stylus" (type: STYLUS, id 11)
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) keeping acceleration scheme 1
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration profile 0
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration factor: 2.000
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration threshold: 4
[    23.370] (II) config/udev: Adding input device Wacom Bamboo Craft Pen (/dev/input/mouse1)
[    23.370] (II) No input driver specified, ignoring this device.
[    23.370] (II) This device may have been added with another device file.
[    23.371] (II) config/udev: Adding input device Wacom Bamboo Craft Finger (/dev/input/event6)
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "evdev touchpad catchall"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "touchpad catchall"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "Default clickpad buttons"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "Wacom class"
[    23.371] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Finger'
[    23.371] (**) Wacom Bamboo Craft Finger: always reports core events
[    23.371] (**) Option "Device" "/dev/input/event6"
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'stylus' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'eraser' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'cursor' for this device.
[    23.371] (II) Wacom Bamboo Craft Finger: type not specified, assuming 'touch'.
[    23.371] (II) Wacom Bamboo Craft Finger: other types will be automatically added.
[    23.371] (--) Wacom Bamboo Craft Finger touch: using pressure threshold of 27 for button 1
[    23.371] (--) Wacom Bamboo Craft Finger touch: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 
[    23.371] (II) Wacom Bamboo Craft Finger touch: hotplugging dependent devices.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'stylus' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'eraser' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'cursor' for this device.
[    23.371] (II) Wacom Bamboo Craft Finger touch: hotplugging completed.
[    23.376] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input6/event6"
[    23.376] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Finger touch" (type: TOUCH, id 12)
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) keeping acceleration scheme 1
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration profile 0
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration factor: 2.000
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration threshold: 4
[    23.376] (II) config/udev: Adding input device Wacom Bamboo Craft Finger (/dev/input/mouse2)
[    23.376] (**) Wacom Bamboo Craft Finger: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.388] (**) Wacom Bamboo Craft Pen eraser: Applying InputClass "evdev tablet catchall"
[    23.388] (**) Wacom Bamboo Craft Pen eraser: Applying InputClass "Wacom class"
[    23.388] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Pen eraser'
[    23.388] (**) Wacom Bamboo Craft Pen eraser: always reports core events
[    23.388] (**) Option "Device" "/dev/input/event5"
[    23.388] (**) Option "Type" "eraser"
[    23.388] (--) Wacom Bamboo Craft Pen eraser: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
[    23.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5/event5"
[    23.392] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Pen eraser" (type: ERASER, id 13)
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) keeping acceleration scheme 1
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration profile 0
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration factor: 2.000
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration threshold: 4
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "evdev touchpad catchall"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "touchpad catchall"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "Default clickpad buttons"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "Wacom class"
[    23.392] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Finger pad'
[    23.392] (**) Wacom Bamboo Craft Finger pad: always reports core events
[    23.392] (**) Option "Device" "/dev/input/event6"
[    23.392] (**) Option "Type" "pad"
[    23.392] (--) Wacom Bamboo Craft Finger pad: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 
[    23.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input6/event6"
[    23.396] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Finger pad" (type: PAD, id 14)
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) keeping acceleration scheme 1
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration profile 0
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration factor: 2.000
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration threshold: 4
[    26.957] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    26.957] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    26.957] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    26.957] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    26.957] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    26.957] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    32.465] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    32.465] (II) NOUVEAU(0): Using hsync ranges from config file
[    32.465] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    32.465] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    32.465] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    32.465] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    37.663] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    37.663] (II) NOUVEAU(0): Using hsync ranges from config file
[    37.663] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    37.663] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    37.663] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    37.663] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    41.206] (II) XKB: reuse xkmfile /var/lib/xkb/server-00D3B15C4E3919D9AEADF6C9CAD70C73B7484355.xkm
[    51.961] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    51.961] (II) NOUVEAU(0): Using hsync ranges from config file
[    51.961] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    51.961] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    51.961] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    51.961] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Podczas pisania wyskoczyła mi informacja, że zamknął się Compiz, może to ma coś z tym wspólnego?
I tak, to normalna instalacja na dysku, nie mam też innego systemu na kompie teraz, tylko to Ubuntu.
Na górę
Awatar użytkownika
igotit4free
Przyjaciel
Przyjaciel
Posty: 6453
Rejestracja: 29 paź 2008, 22:51
Płeć: Mężczyzna
Architektura: x86_64
Lokalizacja: KRK

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: igotit4free »

To jest jakiś laptop Acera? Inny system na nim działa? Stabilnie? Nie grzeje się czasami? Kiedy był ostatnio czyszczony/odkurzany?
Windows 10 @ GA-P67A-D3-B3, i3-2100 3.10GHz, 8GB RAM, Gigabyte HD6850 1GB RAM
Android 7.0 @ Motorola Moto G4+
Na górę
norvoles
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1113
Rejestracja: 04 sty 2008, 20:58
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: norvoles »

Poszukaj logu Xorg.0.old w katalogu /var/log (drugi najmłodszy sortując po dacie). Ten, który podałeś to jest log z aktualnie działającego systemu, gdzie nic się nie zawiesiło.
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Acer, ale nie laptop. Miałem na nim Windows 7 przez kilka lat i działał stabilnie, chociaż podczas grania w niektóre gry dość głośno chodził od dłuższego czasu. Ostatnio czyściłem z jakiś miesiąc temu, może trochę więcej.

Xorg.0.old nie mogę otworzyć:
"Could not display "/var/log/Xorg.0.log.old".
There is no application installed for backup file files.
Do you want to search for an application to open this file?"

Klikam Yes, ale po chwili wyszukiwania wyskakuje:
"nautilus requires to install software to open files of the following file type: backup file

buckup file is not supported"
Na górę
norvoles
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1113
Rejestracja: 04 sty 2008, 20:58
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: norvoles »

Ech, te pomysły z Windowsa... to jest zwykły plik tekstowy, możesz go otworzyć byle notatnikiem.
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Rzeczywiście, wybacz :D

Kod: Zaznacz cały

[    19.805] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    19.805] X Protocol Version 11, Revision 0
[    19.805] Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
[    19.805] Current Operating System: Linux piotr-Aspire-X3900 3.8.0-33-generic #48~precise1-Ubuntu SMP Thu Oct 24 16:28:06 UTC 2013 x86_64
[    19.805] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=d5bdafd7-451c-4960-9a89-c1db4a07188a ro quiet splash vt.handoff=7
[    19.805] Build Date: 16 October 2013  04:46:41PM
[    19.805] xorg-server 2:1.13.3-0ubuntu6~precise3 (For technical support please see http://www.ubuntu.com/support) 
[    19.805] Current version of pixman: 0.24.4
[    19.805] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    19.805] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.805] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 11 14:59:13 2013
[    19.969] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.224] (==) No Layout section.  Using the first Screen section.
[    20.224] (==) No screen section available. Using defaults.
[    20.224] (**) |-->Screen "Default Screen Section" (0)
[    20.224] (**) |   |-->Monitor "<default monitor>"
[    20.224] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.224] (==) Automatically adding devices
[    20.224] (==) Automatically enabling devices
[    20.224] (==) Automatically adding GPU devices
[    20.287] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.287] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.287] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.287] 	Entry deleted from font path.
[    20.309] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.309] 	Entry deleted from font path.
[    20.309] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    20.309] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.309] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.309] (II) Loader magic: 0x7f3c9bbefc20
[    20.309] (II) Module ABI versions:
[    20.309] 	X.Org ANSI C Emulation: 0.4
[    20.309] 	X.Org Video Driver: 13.1
[    20.309] 	X.Org XInput driver : 18.0
[    20.309] 	X.Org Server Extension : 7.0
[    20.309] (II) config/udev: Adding drm device (/dev/dri/card0)
[    20.311] (--) PCI:*(0:1:0:0) 10de:0ca2:174b:2150 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[    20.311] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.311] Initializing built-in extension Generic Event Extension
[    20.311] Initializing built-in extension SHAPE
[    20.311] Initializing built-in extension MIT-SHM
[    20.311] Initializing built-in extension XInputExtension
[    20.311] Initializing built-in extension XTEST
[    20.311] Initializing built-in extension BIG-REQUESTS
[    20.311] Initializing built-in extension SYNC
[    20.311] Initializing built-in extension XKEYBOARD
[    20.311] Initializing built-in extension XC-MISC
[    20.311] Initializing built-in extension SECURITY
[    20.311] Initializing built-in extension XINERAMA
[    20.311] Initializing built-in extension XFIXES
[    20.311] Initializing built-in extension RENDER
[    20.311] Initializing built-in extension RANDR
[    20.311] Initializing built-in extension COMPOSITE
[    20.311] Initializing built-in extension DAMAGE
[    20.311] Initializing built-in extension MIT-SCREEN-SAVER
[    20.311] Initializing built-in extension DOUBLE-BUFFER
[    20.311] Initializing built-in extension RECORD
[    20.311] Initializing built-in extension DPMS
[    20.311] Initializing built-in extension X-Resource
[    20.311] Initializing built-in extension XVideo
[    20.311] Initializing built-in extension XVideo-MotionCompensation
[    20.311] Initializing built-in extension XFree86-VidModeExtension
[    20.311] Initializing built-in extension XFree86-DGA
[    20.311] Initializing built-in extension XFree86-DRI
[    20.311] Initializing built-in extension DRI2
[    20.311] (II) LoadModule: "glx"
[    20.402] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.469] (II) Module glx: vendor="X.Org Foundation"
[    20.469] 	compiled for 1.13.3, module version = 1.0.0
[    20.469] 	ABI class: X.Org Server Extension, version 7.0
[    20.469] (==) AIGLX enabled
[    20.480] Loading extension GLX
[    20.480] (==) Matched nvidia as autoconfigured driver 0
[    20.480] (==) Matched nouveau as autoconfigured driver 1
[    20.480] (==) Matched nvidia as autoconfigured driver 2
[    20.480] (==) Matched nouveau as autoconfigured driver 3
[    20.480] (==) Matched vesa as autoconfigured driver 4
[    20.480] (==) Matched modesetting as autoconfigured driver 5
[    20.480] (==) Matched fbdev as autoconfigured driver 6
[    20.480] (==) Assigned the driver to the xf86ConfigLayout
[    20.480] (II) LoadModule: "nvidia"
[    20.481] (WW) Warning, couldn't open module nvidia
[    20.481] (II) UnloadModule: "nvidia"
[    20.481] (II) Unloading nvidia
[    20.481] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.481] (II) LoadModule: "nouveau"
[    20.481] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.641] (II) Module nouveau: vendor="X.Org Foundation"
[    20.641] 	compiled for 1.13.3, module version = 1.0.7
[    20.641] 	Module class: X.Org Video Driver
[    20.641] 	ABI class: X.Org Video Driver, version 13.1
[    20.641] (II) LoadModule: "vesa"
[    20.641] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.695] (II) Module vesa: vendor="X.Org Foundation"
[    20.695] 	compiled for 1.13.3, module version = 2.3.2
[    20.695] 	Module class: X.Org Video Driver
[    20.695] 	ABI class: X.Org Video Driver, version 13.1
[    20.695] (II) LoadModule: "modesetting"
[    20.695] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.739] (II) Module modesetting: vendor="X.Org Foundation"
[    20.739] 	compiled for 1.13.3, module version = 0.7.0
[    20.739] 	Module class: X.Org Video Driver
[    20.739] 	ABI class: X.Org Video Driver, version 13.1
[    20.739] (II) LoadModule: "fbdev"
[    20.739] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.046] (II) Module fbdev: vendor="X.Org Foundation"
[    21.046] 	compiled for 1.13.3, module version = 0.4.3
[    21.046] 	Module class: X.Org Video Driver
[    21.046] 	ABI class: X.Org Video Driver, version 13.1
[    21.046] (==) Matched nvidia as autoconfigured driver 0
[    21.046] (==) Matched nouveau as autoconfigured driver 1
[    21.046] (==) Matched nvidia as autoconfigured driver 2
[    21.046] (==) Matched nouveau as autoconfigured driver 3
[    21.046] (==) Matched vesa as autoconfigured driver 4
[    21.046] (==) Matched modesetting as autoconfigured driver 5
[    21.046] (==) Matched fbdev as autoconfigured driver 6
[    21.046] (==) Assigned the driver to the xf86ConfigLayout
[    21.046] (II) LoadModule: "nvidia"
[    21.047] (WW) Warning, couldn't open module nvidia
[    21.047] (II) UnloadModule: "nvidia"
[    21.047] (II) Unloading nvidia
[    21.047] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    21.047] (II) LoadModule: "nouveau"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.047] (II) Module nouveau: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 1.0.7
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "nouveau"
[    21.047] (II) Unloading nouveau
[    21.047] (II) Failed to load module "nouveau" (already loaded, 0)
[    21.047] (II) LoadModule: "vesa"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.047] (II) Module vesa: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 2.3.2
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "vesa"
[    21.047] (II) Unloading vesa
[    21.047] (II) Failed to load module "vesa" (already loaded, 0)
[    21.047] (II) LoadModule: "modesetting"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.047] (II) Module modesetting: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 0.7.0
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "modesetting"
[    21.047] (II) Unloading modesetting
[    21.047] (II) Failed to load module "modesetting" (already loaded, 0)
[    21.047] (II) LoadModule: "fbdev"
[    21.047] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.047] (II) Module fbdev: vendor="X.Org Foundation"
[    21.047] 	compiled for 1.13.3, module version = 0.4.3
[    21.047] 	Module class: X.Org Video Driver
[    21.047] 	ABI class: X.Org Video Driver, version 13.1
[    21.047] (II) UnloadModule: "fbdev"
[    21.047] (II) Unloading fbdev
[    21.047] (II) Failed to load module "fbdev" (already loaded, 0)
[    21.047] (II) NOUVEAU driver Date:   Wed Mar 27 09:50:03 2013 +0100
[    21.047] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.047] 	RIVA TNT        (NV04)
[    21.047] 	RIVA TNT2       (NV05)
[    21.047] 	GeForce 256     (NV10)
[    21.047] 	GeForce 2       (NV11, NV15)
[    21.047] 	GeForce 4MX     (NV17, NV18)
[    21.047] 	GeForce 3       (NV20)
[    21.047] 	GeForce 4Ti     (NV25, NV28)
[    21.047] 	GeForce FX      (NV3x)
[    21.047] 	GeForce 6       (NV4x)
[    21.047] 	GeForce 7       (G7x)
[    21.047] 	GeForce 8       (G8x)
[    21.047] 	GeForce GTX 200 (NVA0)
[    21.047] 	GeForce GTX 400 (NVC0)
[    21.047] (II) VESA: driver for VESA chipsets: vesa
[    21.047] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.047] (II) FBDEV: driver for framebuffer: fbdev
[    21.047] (++) using VT number 7

[    21.082] (II) [drm] nouveau interface version: 1.1.0
[    21.082] (WW) Falling back to old probe method for vesa
[    21.082] (WW) Falling back to old probe method for modesetting
[    21.082] (WW) Falling back to old probe method for fbdev
[    21.082] (II) Loading sub module "fbdevhw"
[    21.082] (II) LoadModule: "fbdevhw"
[    21.083] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.108] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.108] 	compiled for 1.13.3, module version = 0.0.2
[    21.108] 	ABI class: X.Org Video Driver, version 13.1
[    21.108] (II) Loading sub module "dri"
[    21.108] (II) LoadModule: "dri"
[    21.108] (II) Module "dri" already built-in
[    21.108] (II) NOUVEAU(0): Loaded DRI module
[    21.109] (--) NOUVEAU(0): Chipset: "NVIDIA NVa3"
[    21.109] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.109] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    21.109] (==) NOUVEAU(0): RGB weight 888
[    21.109] (==) NOUVEAU(0): Default visual is TrueColor
[    21.109] (==) NOUVEAU(0): Using HW cursor
[    21.109] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    21.109] (==) NOUVEAU(0): Page flipping enabled
[    21.109] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    21.163] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    21.165] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    21.167] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    21.195] (II) NOUVEAU(0): EDID for output DVI-I-1
[    21.195] (II) NOUVEAU(0): Manufacturer: ACR  Model: d0  Serial#: 5278506
[    21.195] (II) NOUVEAU(0): Year: 2010  Week: 5
[    21.195] (II) NOUVEAU(0): EDID Version: 1.3
[    21.195] (II) NOUVEAU(0): Digital Display Input
[    21.195] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    21.195] (II) NOUVEAU(0): Gamma: 2.20
[    21.195] (II) NOUVEAU(0): DPMS capabilities: Off
[    21.195] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.195] (II) NOUVEAU(0): First detailed timing is preferred mode
[    21.195] (II) NOUVEAU(0): redX: 0.644 redY: 0.336   greenX: 0.301 greenY: 0.611
[    21.195] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    21.195] (II) NOUVEAU(0): Supported established timings:
[    21.195] (II) NOUVEAU(0): 720x400@70Hz
[    21.195] (II) NOUVEAU(0): 640x480@60Hz
[    21.195] (II) NOUVEAU(0): 640x480@67Hz
[    21.195] (II) NOUVEAU(0): 800x600@56Hz
[    21.195] (II) NOUVEAU(0): 800x600@60Hz
[    21.195] (II) NOUVEAU(0): 1024x768@60Hz
[    21.195] (II) NOUVEAU(0): 1024x768@70Hz
[    21.195] (II) NOUVEAU(0): Manufacturer's mask: 0
[    21.195] (II) NOUVEAU(0): Supported standard timings:
[    21.195] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    21.195] (II) NOUVEAU(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    21.195] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.195] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    21.195] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    21.195] (II) NOUVEAU(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    21.195] (II) NOUVEAU(0): Supported detailed timing:
[    21.195] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    21.195] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    21.195] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    21.195] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    21.195] (II) NOUVEAU(0): Monitor name: Acer P235H
[    21.195] (II) NOUVEAU(0): Serial No: LH10W0054301
[    21.195] (II) NOUVEAU(0): EDID (in hex):
[    21.195] (II) NOUVEAU(0): 	00ffffffffffff000472d0002a8b5000
[    21.195] (II) NOUVEAU(0): 	0514010380331d782ac285a4564d9c25
[    21.195] (II) NOUVEAU(0): 	125054b30c00714f810081809500b300
[    21.195] (II) NOUVEAU(0): 	d1c001010101023a801871382d40582c
[    21.195] (II) NOUVEAU(0): 	4500fe1f1100001e000000fd00384b1e
[    21.195] (II) NOUVEAU(0): 	5311000a202020202020000000fc0041
[    21.195] (II) NOUVEAU(0): 	6365722050323335480a2020000000ff
[    21.195] (II) NOUVEAU(0): 	004c48313057303035343330310a00b9
[    21.195] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    21.196] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    21.196] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.196] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.198] (II) NOUVEAU(0): EDID for output VGA-1
[    21.199] (II) NOUVEAU(0): EDID for output HDMI-1
[    21.199] (II) NOUVEAU(0): Output DVI-I-1 connected
[    21.199] (II) NOUVEAU(0): Output VGA-1 disconnected
[    21.199] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    21.199] (II) NOUVEAU(0): Using exact sizes for initial modes
[    21.200] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[    21.200] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.200] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    21.200] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    21.200] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    21.200] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    21.200] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    21.200] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    21.200] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.200] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    21.200] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.200] (==) NOUVEAU(0): DPI set to (96, 96)
[    21.200] (II) Loading sub module "fb"
[    21.200] (II) LoadModule: "fb"
[    21.200] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.228] (II) Module fb: vendor="X.Org Foundation"
[    21.228] 	compiled for 1.13.3, module version = 1.0.0
[    21.228] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.228] (II) Loading sub module "exa"
[    21.228] (II) LoadModule: "exa"
[    21.228] (II) Loading /usr/lib/xorg/modules/libexa.so
[    21.331] (II) Module exa: vendor="X.Org Foundation"
[    21.331] 	compiled for 1.13.3, module version = 2.6.0
[    21.331] 	ABI class: X.Org Video Driver, version 13.1
[    21.331] (II) Loading sub module "shadowfb"
[    21.331] (II) LoadModule: "shadowfb"
[    21.331] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    21.419] (II) Module shadowfb: vendor="X.Org Foundation"
[    21.419] 	compiled for 1.13.3, module version = 1.0.0
[    21.419] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.419] (II) UnloadModule: "vesa"
[    21.419] (II) Unloading vesa
[    21.419] (II) UnloadModule: "modesetting"
[    21.419] (II) Unloading modesetting
[    21.419] (II) UnloadModule: "fbdev"
[    21.419] (II) Unloading fbdev
[    21.419] (II) UnloadSubModule: "fbdevhw"
[    21.419] (II) Unloading fbdevhw
[    21.419] (--) Depth 24 pixmap format is 32 bpp
[    21.421] (II) NOUVEAU(0): Opened GPU channel 0
[    21.430] (II) NOUVEAU(0): [DRI2] Setup complete
[    21.430] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    21.430] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    21.433] (II) EXA(0): Driver allocated offscreen pixmaps
[    21.433] (II) EXA(0): Driver registered support for the following operations:
[    21.433] (II)         Solid
[    21.433] (II)         Copy
[    21.433] (II)         Composite (RENDER acceleration)
[    21.433] (II)         UploadToScreen
[    21.433] (II)         DownloadFromScreen
[    21.433] (==) NOUVEAU(0): Backing store disabled
[    21.433] (==) NOUVEAU(0): Silken mouse enabled
[    21.433] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    21.433] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    21.433] (==) NOUVEAU(0): DPMS enabled
[    21.433] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.434] (--) RandR disabled
[    23.172] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.172] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.172] (II) AIGLX: enabled GLX_ARB_create_context
[    23.172] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    23.172] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    23.172] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.172] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.173] (II) AIGLX: Loaded and initialized nouveau
[    23.173] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.177] (II) NOUVEAU(0): NVEnterVT is called.
[    23.178] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    23.178] resize called 1920 1080
[    23.283] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    23.306] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    23.306] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.306] (II) LoadModule: "evdev"
[    23.306] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    23.346] (II) Module evdev: vendor="X.Org Foundation"
[    23.346] 	compiled for 1.13.3, module version = 2.7.3
[    23.346] 	Module class: X.Org XInput Driver
[    23.346] 	ABI class: X.Org XInput driver, version 18.0
[    23.346] (II) Using input driver 'evdev' for 'Power Button'
[    23.346] (**) Power Button: always reports core events
[    23.346] (**) evdev: Power Button: Device: "/dev/input/event1"
[    23.346] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.346] (--) evdev: Power Button: Found keys
[    23.346] (II) evdev: Power Button: Configuring as keyboard
[    23.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    23.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    23.346] (**) Option "xkb_rules" "evdev"
[    23.346] (**) Option "xkb_model" "pc105"
[    23.346] (**) Option "xkb_layout" "pl"
[    23.348] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    23.358] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    23.358] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.358] (II) Using input driver 'evdev' for 'Power Button'
[    23.358] (**) Power Button: always reports core events
[    23.358] (**) evdev: Power Button: Device: "/dev/input/event0"
[    23.358] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.358] (--) evdev: Power Button: Found keys
[    23.358] (II) evdev: Power Button: Configuring as keyboard
[    23.358] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    23.358] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    23.358] (**) Option "xkb_rules" "evdev"
[    23.358] (**) Option "xkb_model" "pc105"
[    23.358] (**) Option "xkb_layout" "pl"
[    23.358] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    23.358] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.359] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[    23.359] (II) No input driver specified, ignoring this device.
[    23.359] (II) This device may have been added with another device file.
[    23.360] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event2)
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "evdev keyboard catchall"
[    23.360] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4004'
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: Device: "/dev/input/event2"
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Vendor 0x46d Product 0xc52b
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found 1 mouse buttons
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found scroll wheel(s)
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found relative axes
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing relative x/y axes to exist.
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found absolute axes
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing absolute x/y axes to exist.
[    23.360] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found keys
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as mouse
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as keyboard
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Adding scrollwheel support
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: YAxisMapping: buttons 4 and 5
[    23.360] (**) evdev: Logitech Unifying Device. Wireless PID:4004: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input2/event2"
[    23.360] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 8)
[    23.360] (**) Option "xkb_rules" "evdev"
[    23.360] (**) Option "xkb_model" "pc105"
[    23.360] (**) Option "xkb_layout" "pl"
[    23.360] (II) evdev: Logitech Unifying Device. Wireless PID:4004: initialized for relative axes.
[    23.360] (WW) evdev: Logitech Unifying Device. Wireless PID:4004: ignoring absolute axes.
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) keeping acceleration scheme 1
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration profile 0
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[    23.360] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[    23.360] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event3)
[    23.360] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[    23.360] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[    23.360] (**) HP HP Link-5 micro dongle: always reports core events
[    23.360] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event3"
[    23.360] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[    23.360] (--) evdev: HP HP Link-5 micro dongle: Found keys
[    23.360] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[    23.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3/event3"
[    23.361] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 9)
[    23.361] (**) Option "xkb_rules" "evdev"
[    23.361] (**) Option "xkb_model" "pc105"
[    23.361] (**) Option "xkb_layout" "pl"
[    23.361] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event4)
[    23.361] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev pointer catchall"
[    23.361] (**) HP HP Link-5 micro dongle: Applying InputClass "evdev keyboard catchall"
[    23.361] (II) Using input driver 'evdev' for 'HP HP Link-5 micro dongle'
[    23.361] (**) HP HP Link-5 micro dongle: always reports core events
[    23.361] (**) evdev: HP HP Link-5 micro dongle: Device: "/dev/input/event4"
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Vendor 0x3f0 Product 0xa407
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found 9 mouse buttons
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found scroll wheel(s)
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found relative axes
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found x and y relative axes
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found absolute axes
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Forcing absolute x/y axes to exist.
[    23.361] (--) evdev: HP HP Link-5 micro dongle: Found keys
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Configuring as mouse
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Configuring as keyboard
[    23.361] (II) evdev: HP HP Link-5 micro dongle: Adding scrollwheel support
[    23.361] (**) evdev: HP HP Link-5 micro dongle: YAxisMapping: buttons 4 and 5
[    23.361] (**) evdev: HP HP Link-5 micro dongle: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    23.361] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4/event4"
[    23.361] (II) XINPUT: Adding extended input device "HP HP Link-5 micro dongle" (type: KEYBOARD, id 10)
[    23.361] (**) Option "xkb_rules" "evdev"
[    23.361] (**) Option "xkb_model" "pc105"
[    23.361] (**) Option "xkb_layout" "pl"
[    23.361] (II) evdev: HP HP Link-5 micro dongle: initialized for relative axes.
[    23.361] (WW) evdev: HP HP Link-5 micro dongle: ignoring absolute axes.
[    23.361] (**) HP HP Link-5 micro dongle: (accel) keeping acceleration scheme 1
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration profile 0
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration factor: 2.000
[    23.361] (**) HP HP Link-5 micro dongle: (accel) acceleration threshold: 4
[    23.362] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event10)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event11)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event12)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event13)
[    23.362] (II) No input driver specified, ignoring this device.
[    23.362] (II) This device may have been added with another device file.
[    23.362] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event7)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event9)
[    23.363] (II) No input driver specified, ignoring this device.
[    23.363] (II) This device may have been added with another device file.
[    23.363] (II) config/udev: Adding input device Wacom Bamboo Craft Pen (/dev/input/event5)
[    23.363] (**) Wacom Bamboo Craft Pen: Applying InputClass "evdev tablet catchall"
[    23.363] (**) Wacom Bamboo Craft Pen: Applying InputClass "Wacom class"
[    23.363] (II) LoadModule: "wacom"
[    23.363] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    23.364] (II) Module wacom: vendor="X.Org Foundation"
[    23.364] 	compiled for 1.13.3, module version = 0.19.0
[    23.364] 	Module class: X.Org XInput Driver
[    23.364] 	ABI class: X.Org XInput driver, version 18.0
[    23.364] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Pen'
[    23.364] (**) Wacom Bamboo Craft Pen: always reports core events
[    23.364] (**) Option "Device" "/dev/input/event5"
[    23.364] (II) Wacom Bamboo Craft Pen: type not specified, assuming 'stylus'.
[    23.364] (II) Wacom Bamboo Craft Pen: other types will be automatically added.
[    23.364] (--) Wacom Bamboo Craft Pen stylus: using pressure threshold of 27 for button 1
[    23.364] (--) Wacom Bamboo Craft Pen stylus: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
[    23.364] (II) Wacom Bamboo Craft Pen stylus: hotplugging dependent devices.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'cursor' for this device.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'touch' for this device.
[    23.365] (EE) Wacom Bamboo Craft Pen stylus: Invalid type 'pad' for this device.
[    23.365] (II) Wacom Bamboo Craft Pen stylus: hotplugging completed.
[    23.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5/event5"
[    23.370] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Pen stylus" (type: STYLUS, id 11)
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) keeping acceleration scheme 1
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration profile 0
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration factor: 2.000
[    23.370] (**) Wacom Bamboo Craft Pen stylus: (accel) acceleration threshold: 4
[    23.370] (II) config/udev: Adding input device Wacom Bamboo Craft Pen (/dev/input/mouse1)
[    23.370] (II) No input driver specified, ignoring this device.
[    23.370] (II) This device may have been added with another device file.
[    23.371] (II) config/udev: Adding input device Wacom Bamboo Craft Finger (/dev/input/event6)
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "evdev touchpad catchall"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "touchpad catchall"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "Default clickpad buttons"
[    23.371] (**) Wacom Bamboo Craft Finger: Applying InputClass "Wacom class"
[    23.371] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Finger'
[    23.371] (**) Wacom Bamboo Craft Finger: always reports core events
[    23.371] (**) Option "Device" "/dev/input/event6"
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'stylus' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'eraser' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger: Invalid type 'cursor' for this device.
[    23.371] (II) Wacom Bamboo Craft Finger: type not specified, assuming 'touch'.
[    23.371] (II) Wacom Bamboo Craft Finger: other types will be automatically added.
[    23.371] (--) Wacom Bamboo Craft Finger touch: using pressure threshold of 27 for button 1
[    23.371] (--) Wacom Bamboo Craft Finger touch: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 
[    23.371] (II) Wacom Bamboo Craft Finger touch: hotplugging dependent devices.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'stylus' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'eraser' for this device.
[    23.371] (EE) Wacom Bamboo Craft Finger touch: Invalid type 'cursor' for this device.
[    23.371] (II) Wacom Bamboo Craft Finger touch: hotplugging completed.
[    23.376] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input6/event6"
[    23.376] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Finger touch" (type: TOUCH, id 12)
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) keeping acceleration scheme 1
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration profile 0
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration factor: 2.000
[    23.376] (**) Wacom Bamboo Craft Finger touch: (accel) acceleration threshold: 4
[    23.376] (II) config/udev: Adding input device Wacom Bamboo Craft Finger (/dev/input/mouse2)
[    23.376] (**) Wacom Bamboo Craft Finger: Ignoring device from InputClass "touchpad ignore duplicates"
[    23.388] (**) Wacom Bamboo Craft Pen eraser: Applying InputClass "evdev tablet catchall"
[    23.388] (**) Wacom Bamboo Craft Pen eraser: Applying InputClass "Wacom class"
[    23.388] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Pen eraser'
[    23.388] (**) Wacom Bamboo Craft Pen eraser: always reports core events
[    23.388] (**) Option "Device" "/dev/input/event5"
[    23.388] (**) Option "Type" "eraser"
[    23.388] (--) Wacom Bamboo Craft Pen eraser: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
[    23.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5/event5"
[    23.392] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Pen eraser" (type: ERASER, id 13)
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) keeping acceleration scheme 1
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration profile 0
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration factor: 2.000
[    23.392] (**) Wacom Bamboo Craft Pen eraser: (accel) acceleration threshold: 4
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "evdev touchpad catchall"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "touchpad catchall"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "Default clickpad buttons"
[    23.392] (**) Wacom Bamboo Craft Finger pad: Applying InputClass "Wacom class"
[    23.392] (II) Using input driver 'wacom' for 'Wacom Bamboo Craft Finger pad'
[    23.392] (**) Wacom Bamboo Craft Finger pad: always reports core events
[    23.392] (**) Option "Device" "/dev/input/event6"
[    23.392] (**) Option "Type" "pad"
[    23.392] (--) Wacom Bamboo Craft Finger pad: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 
[    23.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input6/event6"
[    23.396] (II) XINPUT: Adding extended input device "Wacom Bamboo Craft Finger pad" (type: PAD, id 14)
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) keeping acceleration scheme 1
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration profile 0
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration factor: 2.000
[    23.396] (**) Wacom Bamboo Craft Finger pad: (accel) acceleration threshold: 4
[    26.957] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    26.957] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    26.957] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    26.957] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    26.957] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    26.957] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    26.957] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    32.465] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    32.465] (II) NOUVEAU(0): Using hsync ranges from config file
[    32.465] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    32.465] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    32.465] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    32.465] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    32.465] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    37.663] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    37.663] (II) NOUVEAU(0): Using hsync ranges from config file
[    37.663] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    37.663] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    37.663] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    37.663] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    37.663] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    41.206] (II) XKB: reuse xkmfile /var/lib/xkb/server-00D3B15C4E3919D9AEADF6C9CAD70C73B7484355.xkm
[    51.961] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[    51.961] (II) NOUVEAU(0): Using hsync ranges from config file
[    51.961] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    51.961] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    51.961] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    51.961] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    51.962] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Pen eraser: Error reading wacom device : No such device
[  2886.180] (II) config/udev: removing device Wacom Bamboo Craft Pen stylus
[  2886.181] (II) UnloadModule: "wacom"
[  2886.181] (II) config/udev: removing device Wacom Bamboo Craft Pen eraser
[  2886.212] (II) UnloadModule: "wacom"
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
[  2886.240] (II) config/udev: removing device Wacom Bamboo Craft Finger touch
[  2886.241] (II) UnloadModule: "wacom"
[  2886.241] (II) config/udev: removing device Wacom Bamboo Craft Finger pad
[  2886.264] (II) UnloadModule: "wacom"
[  2898.930] (II) NOUVEAU(0): EDID vendor "ACR", prod id 208
[  2898.930] (II) NOUVEAU(0): Using hsync ranges from config file
[  2898.930] (II) NOUVEAU(0): Using vrefresh ranges from config file
[  2898.930] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  2898.930] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  2898.930] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  2898.930] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[  2899.701] (II) XKB: reuse xkmfile /var/lib/xkb/server-00D3B15C4E3919D9AEADF6C9CAD70C73B7484355.xkm
\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00
Tych "\00'\" na końcu było o wiele więcej, ale przekroczyło limit znaków w poście :P
Na górę
norvoles
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1113
Rejestracja: 04 sty 2008, 20:58
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: norvoles »

Kod: Zaznacz cały

(EE) Wacom Bamboo Craft Finger pad: Error reading wacom device : No such device
A sprawdź, czy system się wiesza jak odłączysz to urządzonko?
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Odłączyłem, popracowałem dość długo ale jednak, koniec końców znowu się zawiesiło.
Na górę
marcin1982
Gibki Gibbon
Gibki Gibbon
Posty: 3209
Rejestracja: 30 wrz 2007, 13:49
Płeć: Mężczyzna

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: marcin1982 »

Pokaż jeszcze wynik polecenia:

Kod: Zaznacz cały

cat ~/.xsession-errors
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

Kod: Zaznacz cały

piotr@piotr-Aspire-X3900:~$ cat ~/.xsession-errors
Backend     : gconf
Integration : true
Profile     : unity
Adding plugins
Initializing core options...done
Initializing composite options...done
** Message: applet now removed from the notification area
** Message: using fallback from indicator to GtkStatusIcon
Initializing opengl options...done
Initializing decor options...done
Initializing vpswitch options...done
Initializing snap options...done
Initializing mousepoll options...done
Initializing resize options...done
Initializing place options...done
Initializing move options...done
Initializing wall options...done
Initializing grid options...done
I/O warning : failed to load external entity "/home/piotr/.compiz/session/1017d1a45cbd3c683413841932612039600000014630033"
Initializing session options...done
Initializing gnomecompat options...done
Initializing animation options...done
Initializing fade options...done
Initializing unitymtgrabhandles options...done
Initializing workarounds options...done
Initializing scale options...done
compiz (expo) - Warn: failed to bind image to texture
Initializing expo options...done
Initializing ezoom options...done

(compiz:1669): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed
Initializing unityshell options...done
Setting Update "main_menu_key"
Setting Update "run_key"
Setting Update "icon_size"
** Message: moving back from GtkStatusIcon to indicator

** (zeitgeist-datahub:2063): WARNING **: zeitgeist-datahub.vala:227: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
[1941:2048:1111/190826:ERROR:native_backend_gnome_x.cc(664)] Keyring find failed: 
[install_plugins] Message: Checking plugin: Offline PlayOnLinux...
[install_plugins] Message: Checking plugin: Capture...
[install_plugins] Message: Checking plugin: Transgaming Cedega...
[install_plugins] Message: Checking plugin: Wine Import...
[install_plugins] Message: Checking plugin: Wine Look...
[install_plugins] Message: Checking plugin: Screen Capture...
[install_plugins] Message: Checking plugin: PlayOnLinux Vault...
[maj_check] Message: List is up to date
[WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
piotr@piotr-Aspire-X3900:~$
Zauważyłem też, że podczas uruchamiania komputera, w lewym górnym rogu pokazuje mi się napis: could not write bytes: Broken pipe
Na górę
norvoles
Przebojowy Jelonek
Przebojowy Jelonek
Posty: 1113
Rejestracja: 04 sty 2008, 20:58
Płeć: Mężczyzna
Wersja Ubuntu: inny OS
Środowisko graficzne: Inne
Architektura: x86_64

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: norvoles »

Nie jestem specem od laptopów, ale widzę, że masz kartę NVidii działającą na sterowniku nouveau (otwartym). Próbowałeś instalować sterowniki własnościowe od NVidii?
Na górę
Roku
Piegowaty Guziec
Piegowaty Guziec
Posty: 20
Rejestracja: 01 cze 2009, 23:53
Płeć: Mężczyzna
Wersja Ubuntu: 11.10
Środowisko graficzne: GNOME

Re: Ubuntu 12.04 ciągle się wiesza

Post autor: Roku »

To nie laptop, pisałem o tym wcześniej ;)
W każdym razie zainstalowałem sterownik tak jak mi poleciłeś i od tamtej pory nie zawiesił się ani razu, więc chyba pomogło :D Dzięki wielkie! :)
Na górę
ODPOWIEDZ

Wróć do „Instalacja, aktualizacja i konfiguracja Ubuntu”

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 7 gości