Brak drugiej karty VGA Lenovo G710 Intel 4000 HD z GT720

[jony_be1]

Witam

Czy ktoś może mi pomóc.... zainstalowałem Ubuntu 12.04 LTS (nowszy również) który nie wykrywa mi drugiej karty VGA GT720, jedynie kontroler 3D co pokazuje LSPCI. Jądro zaktualizowałem do najnowszego 12.0-031200-generic

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
07:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
08:00.0 Ethernet controller: Qualcomm Atheros QCA8172 Fast Ethernet (rev 10)

Instalowałem 13.04, 13.10 efekt ten sam..... ale zostałem przy 12.04 LTS. Pod Windą 8 wszystko gra..... Zbyt nowa karta, jakieś sugestie ??

[igotit4free]

Bumblebee.

[jony_be1]

Rozumiem Twoją szybką odpowiedz kierującą mnie do wyszukiwarki i Bumblebee ale to nie zmienia sprawy. Mam to zainstalowane jednak system nie widzi karty VGA z GT720 tylko Intela.
http://www.dobreprogramy.pl/skandyn/Bum ... 31288.html Już to przerobiłem i zamieściłem komentarz

[igotit4free]

Co rozumiesz przez "nie widzi"? Albo "nie wykrywa"? Konkretnie proszę, szklana kula mnie się stłukła.
W swoim pierwszym poście zamieszczasz wynik polecenia który bez cienia wątpliwości wskazuje na to, że obie karty "są widziane". Zarówno karta zintegrowana Intela (VGA) jak i kontroler 3D nVidii "są wykrywane".

[jony_be1]

Czy druga karta Nvidia powinna być widoczna obok karty Intele przy VGA ?

lspci | grep VGA & sudo lshw -C video
[1] 3152
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
*-display UNCLAIMED
description: 3D controller
product: GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:4000(size=128) memory:b2000000-b207ffff
*-display
description: VGA compatible controller
product: 4th Gen Core Processor Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:46 memory:d1000000-d13fffff memory:c0000000-cfffffff ioport:5000(size=64)
[1]+ Done lspci | grep --color=auto

Uruchamiając Optirun otrzymuje

optirun glxspheres
[ 781.570136] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 781.570156] [ERROR]Could not connect to bumblebee daemon - is it running?

Mój plik konfiguracyjny /etc/bumblebee/bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bu ... PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

/etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection

Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"


Option "ProbeAllGpus" "false"

Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection

dpkg -l | grep nvidia
ii bumblebee-nvidia 3.2.1-1~preciseppa6 NVIDIA Optimus support using the proprietary NVIDIA driver
ii nvidia-304 304.88-0ubuntu0.0.3 NVIDIA binary Xorg driver, kernel module and VDPAU library
ii nvidia-common 1:0.2.44.2 Find obsolete NVIDIA drivers
ii nvidia-settings-304 304.88-0ubuntu0.0.3 Tool for configuring the NVIDIA graphics driver

[igotit4free]

Czy wykonałeś operacje wymienione w podlinkowanym przez ciebie artykule w akapicie Instalacja, i czy wykonały się one bezbłędnie?

[jony_be1]

Tak zrobiłem wszystko bez błędów. Jednak zawsze kończyło się tym samym komunikatem przy uruchomieniu Optirun'a

optirun glxspheres
[ 781.570136] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 781.570156] [ERROR]Could not connect to bumblebee daemon - is it running?

Próbowałem to robić pod Ubuntu 13.10 z takim samym skutkiem jak (tj. obecnie) z 12.04 LTS.

[igotit4free]

Kroczek dalej?

[jony_be1]

Na tym się zawiesiłem wcześniej w moich rep nie mam tej wersji szukam skąd pobrac.....

[igotit4free]

A jaką masz?

Kod: Zaznacz cały

uname -r

[jony_be1]

Kod: Zaznacz cały

uname -r
3.12.0-031200-generic