[14.04] Lubuntu - HP LaserJet 1200 nie działa po aktualizacji z 13.10 do 14.04

[uzytkowniczka1]

W wersji Lubuntu 13.10 zainstalowałam sterownik do drukarki HP LaserJet1200 ze strony - http://hplipopensource.com/hplip-web/in ... index.html.
Wszystko pięknie chodziło.

W wersji Lubuntu 14.04 - na początku drukarka działa tylko przez 2 godziny, a później już nie.

[gerald]

Spróbuj przełączyć kabel USB do innego gniazda.

[uzytkowniczka1]

Zmieniłam gniazdo USB - za pierwszym razem wydrukowałam bez problemu, ale po raz drugi drukarka odmówiła posłuszeństwa.
Mam wrażenie, że jest coś nie tak z portami USB, bo w wirtualnej maszynie (WinXP) - drukarka raz działa, a raz nie...

[gerald]

Moze masz kabel wyciągnięty w porcie drukarki, odłącz i podłącz żeby się styki dobrze połączyły.
Jak to nie pomoże to podaj wynik polecenia na podłączonej niedziałającej drukarce

Kod: Zaznacz cały

dmesg | egrep -i 'err|usb|tty|warning|cups'

[uzytkowniczka1]

Kod: Zaznacz cały

[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] console [tty0] enabled
[    0.112801] ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0x03, should be 0xCB (20131115/tbprint-214)
[    0.113031] ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x83, should be 0x8F (20131115/tbprint-214)
[    0.113882] ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x5C, should be 0x22 (20131115/tbprint-214)
[    0.114992] ACPI: Using IOAPIC for interrupt routing
[    0.135125] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[    0.135213] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
[    0.135299] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
[    0.135385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[    0.135470] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[    0.135557] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[    0.135642] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
[    0.135728] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
[    0.136432] ACPI: bus type USB registered
[    0.136432] usbcore: registered new interface driver usbfs
[    0.136432] usbcore: registered new interface driver hub
[    0.136432] usbcore: registered new device driver usb
[    0.792980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.793126] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.808039] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.808145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.808149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808153] usb usb1: Product: EHCI Host Controller
[    0.808156] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.808159] usb usb1: SerialNumber: 0000:00:1d.7
[    0.808310] hub 1-0:1.0: USB hub found
[    0.808632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.808663] uhci_hcd: USB Universal Host Controller Interface driver
[    0.808773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.808881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.808885] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.808888] usb usb2: Product: UHCI Host Controller
[    0.808892] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.808895] usb usb2: SerialNumber: 0000:00:1d.0
[    0.809029] hub 2-0:1.0: USB hub found
[    0.809263] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.809383] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.809387] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809390] usb usb3: Product: UHCI Host Controller
[    0.809393] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.809396] usb usb3: SerialNumber: 0000:00:1d.1
[    0.809526] hub 3-0:1.0: USB hub found
[    0.809759] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.809877] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.809881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.809885] usb usb4: Product: UHCI Host Controller
[    0.809888] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.809891] usb usb4: SerialNumber: 0000:00:1d.2
[    0.810032] hub 4-0:1.0: USB hub found
[    0.810261] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.810380] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.810384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.810388] usb usb5: Product: UHCI Host Controller
[    0.810391] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.810394] usb usb5: SerialNumber: 0000:00:1d.3
[    0.810524] hub 5-0:1.0: USB hub found
[    1.228200] sdhci: Copyright(c) Pierre Ossman
[    1.492105] usb 1-5: new high-speed USB device number 5 using ehci-pci
[    1.625926] usb 1-5: New USB device found, idVendor=174f, idProduct=a311
[    1.625939] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.625947] usb 1-5: Product: USB2.0                  
[    1.625954] usb 1-5: Manufacturer: Syntek    
[    2.124098] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.366875] usb 4-2: New USB device found, idVendor=0b05, idProduct=1712
[    2.366887] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    2.366895] usb 4-2: SerialNumber: 0194E8-5B-0002
[    2.992074] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    3.205085] usb 2-1: New USB device found, idVendor=1a2c, idProduct=0b23
[    3.205098] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.205107] usb 2-1: Product: USB Keyboard
[    3.205114] usb 2-1: Manufacturer: USB
[    3.448098] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[    3.637096] usb 2-2: New USB device found, idVendor=03f0, idProduct=0317
[    3.637109] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.637117] usb 2-2: Product: HP LaserJet 1200
[    3.637125] usb 2-2: Manufacturer: HewLett Packard
[    3.637132] usb 2-2: SerialNumber: 00CNBK041951
[    3.748111] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    4.128130] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[    4.128142] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.128151] usb 3-2: Product: USB Optical Mouse
[    4.128158] usb 3-2: Manufacturer: Logitech
[   12.566084] parport_pc: probe of 00:07 failed with error -22
[   12.968805] WARNING! power/level is deprecated; use power/control instead
[   12.991254] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
[   12.991318] usbcore: registered new interface driver usblp
[   13.052324] usbcore: registered new interface driver btusb
[   13.693095] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
[   13.693104] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
[   13.693116] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   13.693123] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   13.873675] stkwebcam: Syntek USB2.0 Camera is now controlling device video0
[   13.874836] usbcore: registered new interface driver stkwebcam
[   13.897961] usbcore: registered new interface driver usbhid
[   13.897962] usbhid: USB HID core driver
[   13.908691] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input19
[   13.912092] hid-generic 0003:1A2C:0B23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.0-1/input0
[   13.920505] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input20
[   13.920948] hid-generic 0003:1A2C:0B23.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:1d.0-1/input1
[   13.926817] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input21
[   13.927206] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[   15.272743] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   16.823147] Bluetooth: RFCOMM TTY layer initialized
[   17.593317] init: cups main process (706) killed by HUP signal
[   17.593337] init: cups main process ended, respawning
[   20.056182] type=1400 audit(1398418834.714:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=922 comm="apparmor_parser"
[   46.841750] type=1400 audit(1398418859.251:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1519 comm="apparmor_parser"
[   46.841763] type=1400 audit(1398418859.251:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1519 comm="apparmor_parser"
[   46.842516] type=1400 audit(1398418859.251:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1519 comm="apparmor_parser"
[   54.232333] usblp0: removed

-- 25 kwi 2014, o 12:27 --

Właśnie przed chwilą wydrukowały papiery z wczoraj..... Drukuje z wielkimi opóźnieniami....