pendrive montuje się w trybie tylko do odczytu

[bastard79]

zainstalowalem ubuntu na kompie który w zasadzie ma sluzyc jako maszyna do pisania, ale z obsluga pendrive.
zainstalowalem tylko niezbedne pakiety usbmount, pmount. Podpinam wiec pendrive(testowalem dwa rozne z systemem fat16 i fat32) i zawsze montuje w trybie tylko do odczytu.
Jako root moge zapisywac bez problemu, jako user tylko odczyt :/

Przyznam szczerze ze nie mam pomyslu o co chodzi, bezpieczne usuniecie pod windows nie pomaga. w dmesg wyskakuje problem z system vfat (nie pamietam dokladnie tresci komunikatu bo komp w biurze bez dostepu do neta). zmienilem uprawnienia w /media/usb* na 775, jutro spróbuje na 777 ale watpie zeby to pomoglo.

ktos spotkal sie z podobnym problemem ? jakies pomysly jak to rozwiazac ?

[xxx666xxx]

Musisz pogrzebać w uprawnieniach użytkownika. Poszukaj rubryki "Automatyczny dostęp do zewnętrznych urządzeń pamięci masowej" (http://s9.postimg.org/58gxpuehr/uprawnienia.png) lub coś w tym stylu . I zaznacz na X . to powinno pomóc. Też z tym problem miałem kiedyś w jednej dystrybucji Ubuntu.

[marcin1982]

Masz pakiet gvfs lub o podobnej nazwie?

[bastard79]

o 12 jade do roboty to sprawdze, jak wspomnialem nie mam tam internetu i zdalnie nie moge sie zalogowac, instalowanie nowych pakietów tez jest dosc problematyczne, bo na plycie cd jest absolutne minimum, nawet mc nie mozna zainstalowac :/

-- 22 lis 2013 22:31 --

mam pakiety gvfs, nie moge znalezc tej opcji o montowaniu urządzeń.

jakies inne pomysly ? przeciez to raczej podstawowa funkcja montowanie pendrive wiec powinno dzialac od razu po instalacji na swiezym systemie.

-- 25 lis 2013 14:31 --

udało się rozwiązać problem, wystarczy zainstalować gvfs-fuse, pakiety usbmount i pmount nie są potrzebne. teraz działa tak jak powinno.

[olo555]

Jak zainstalować ten pakiet gvfs-fuse ?

[hubitru]

sudo apt-get install gvfs-fuse

[olo555]

Zainstalowałem ten pakiet i wszystko było w porządku 2 dni i dzisiaj podłączyłem pendrive i znowu wszystko "tylko do odczytu" co może być problemem ?

[marcin1982]

Podaj wynik z konsoli:

Kod: Zaznacz cały

ps aux | grep gvfs

[olo555]

Przesyłam

gabriel 2177 0.0 0.0 345752 3684 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd
gabriel 2191 0.0 0.0 360428 4128 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd-fuse /run/user/1000/gvfs -f -o big_writes
gabriel 2376 0.0 0.0 386884 6216 ? Sl lip16 0:00 /usr/lib/gvfs/gvfs-udisks2-volume-monitor
gabriel 2466 0.0 0.0 201652 3108 ? Sl lip16 0:00 /usr/lib/gvfs/gvfs-mtp-volume-monitor
gabriel 2471 0.0 0.0 287368 3376 ? Sl lip16 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor
gabriel 2476 0.0 0.0 213816 5452 ? Sl lip16 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
gabriel 2518 0.0 0.0 375860 6940 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
gabriel 2536 0.0 0.0 271780 3056 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.4 /org/gtk/gvfs/exec_spaw/1
gabriel 2558 0.0 0.0 125964 3000 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd-metadata
gabriel 10128 0.0 0.2 954624 16208 ? Sl lip16 0:00 /usr/lib/gvfs/gvfsd-http --spawner :1.4 /org/gtk/gvfs/exec_spaw/6
gabriel 27354 0.0 0.0 17184 932 pts/0 S+ 17:00 0:00 grep --color=auto gvfs

[igotit4free]

Używasz tego pena tylko pod Ubuntu, czy masz tez inne systemy operacyjne?
Pendrajwa odmontowujesz / usuwasz bezpiecznie, czy po prostu wyrywasz z gniazda kiedy skończysz go używać?

[marcin1982]

Najpierw wykonaj polecenie:

Kod: Zaznacz cały

sudo dmesg -C

Potem podłącz pendrive i podaj wyniki poleceń:

Kod: Zaznacz cały

cat /etc/mtab

Kod: Zaznacz cały

dmesg

[olo555]

Przesyłam kod przy pendriveie tylko do odczytu

Polecenie pierwsze wykonane.

Odpowiedź na polecenie

Kod: Zaznacz cały

cat /etc/mtab

:

Kod: Zaznacz cały

/dev/sda1 / ext4 rw,errors=remount-ro 0 0
proc /proc proc rw,noexec,nosuid,nodev 0 0
sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0
none /sys/fs/cgroup tmpfs rw 0 0
none /sys/fs/fuse/connections fusectl rw 0 0
none /sys/kernel/debug debugfs rw 0 0
none /sys/kernel/security securityfs rw 0 0
udev /dev devtmpfs rw,mode=0755 0 0
devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0
tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0
none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0
none /run/shm tmpfs rw,nosuid,nodev 0 0
none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0
none /sys/fs/pstore pstore rw 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0
/home/gabriel/.Private /home/gabriel ecryptfs ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=94254ee56bb440a0,ecryptfs_fnek_sig=3bd0d4e83b10e648 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=gabriel 0 0
/dev/sdb /media/gabriel/B321-C563 vfat rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2 0 0

Odpowiedź na polecenie

Kod: Zaznacz cały

dmesg

Kod: Zaznacz cały

[  677.414315] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  762.073549] [UFW BLOCK] IN=wlan0 OUT= MAC=9c:4e:36:1d:35:e8:54:e6:fc:c3:3b:16:08:00 SRC=173.194.116.136 DST=192.168.1.102 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=36702 PROTO=TCP SPT=443 DPT=40949 WINDOW=0 RES=0x00 RST URGP=0 
[  802.588623] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  927.659944] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1052.834284] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1178.008614] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1303.182917] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1428.254639] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1553.429071] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1678.603611] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1764.572037] usb 4-4: USB disconnect, device number 2
[ 1769.573325] usb 4-4: Disable of device-initiated U1 failed.
[ 1772.404977] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
[ 1772.433771] usb 4-4: New USB device found, idVendor=0951, idProduct=168e
[ 1772.433779] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1772.433784] usb 4-4: Product: DT Rubber 3.0
[ 1772.433787] usb 4-4: Manufacturer: Kingston
[ 1772.433790] usb 4-4: SerialNumber: 0018F30C9FEAFDB0E10D0F47
[ 1772.445540] usb-storage 4-4:1.0: USB Mass Storage device detected
[ 1772.445835] scsi7 : usb-storage 4-4:1.0
[ 1773.506715] scsi 7:0:0:0: Direct-Access     Kingston DT Rubber 3.0    1.00 PQ: 0 ANSI: 6
[ 1773.507812] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1773.507940] sd 7:0:0:0: [sdb] 30216792 512-byte logical blocks: (15.4 GB/14.4 GiB)
[ 1773.508398] sd 7:0:0:0: [sdb] Write Protect is off
[ 1773.508403] sd 7:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 1773.508807] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1773.518542]  sdb:
[ 1773.520164] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1776.847570] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1776.933738] systemd-hostnamed[3452]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1777.090745] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090749] FAT-fs (sdb): Filesystem has been set read-only
[ 1777.090757] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090760] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090762] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090763] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090765] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090766] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090767] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090768] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1777.090770] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 1803.777850] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 1830.247114] usb 4-4: USB disconnect, device number 3
[ 1835.184259] usb 4-4: Disable of device-initiated U1 failed.
[ 1835.412580] Buffer I/O error on device sdb, logical block 1
[ 1835.412584] lost page write due to I/O error on sdb
[ 1836.710410] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
[ 1836.920564] wlan0: deauthenticating from 54:e6:fc:c3:3b:16 by local choice (reason=3)
[ 1836.955312] cfg80211: Calling CRDA to update world regulatory domain
[ 1836.959875] cfg80211: World regulatory domain updated:
[ 1836.959880] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1836.959883] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1836.959885] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1836.959888] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1836.959890] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1836.959893] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1838.257278] PM: Syncing filesystems ... done.
[ 1838.543941] PM: Preparing system for mem sleep
[ 1838.880727] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1838.882404] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1838.883554] PM: Entering mem sleep
[ 1838.883617] Suspending console(s) (use no_console_suspend to debug)
[ 1838.883770] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1838.883823] sd 1:0:0:0: [sda] Stopping disk
[ 1839.945728] PM: suspend of devices complete after 1060.796 msecs
[ 1839.961654] PM: late suspend of devices complete after 15.905 msecs
[ 1839.977790] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1839.993743] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1840.025652] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1840.041679] PM: noirq suspend of devices complete after 79.932 msecs
[ 1840.041862] ACPI: Preparing to enter system sleep state S3
[ 1840.042350] PM: Saving platform NVS memory
[ 1840.042945] Disabling non-boot CPUs ...
[ 1840.145765] smpboot: CPU 1 is now offline
[ 1840.146238] Broke affinity for irq 45
[ 1840.249884] smpboot: CPU 2 is now offline
[ 1840.250299] Broke affinity for irq 16
[ 1840.250315] Broke affinity for irq 23
[ 1840.250317] Broke affinity for irq 41
[ 1840.250318] Broke affinity for irq 43
[ 1840.354013] smpboot: CPU 3 is now offline
[ 1840.355145] ACPI: Low-level resume complete
[ 1840.355188] PM: Restoring platform NVS memory
[ 1840.355666] Enabling non-boot CPUs ...
[ 1840.355701] x86: Booting SMP configuration:
[ 1840.355703] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1840.385546] CPU1 is up
[ 1840.385562] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1840.399272] CPU2 is up
[ 1840.399289] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1840.413145] CPU3 is up
[ 1840.416262] ACPI: Waking up from system sleep state S3
[ 1840.447552] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1840.479595] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1840.511622] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1840.575839] PM: noirq resume of devices complete after 158.549 msecs
[ 1840.575956] PM: early resume of devices complete after 0.093 msecs
[ 1840.576051] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1840.576769] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1840.788037] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 1840.904084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1840.905857] ata3.00: configured for UDMA/100
[ 1840.952220] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 1842.229887] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 1843.651215] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1843.657720] ata2.00: failed to enable AA (error_mask=0x1)
[ 1843.664262] ata2.00: failed to enable AA (error_mask=0x1)
[ 1843.664270] ata2.00: configured for UDMA/100
[ 1843.687319] sd 1:0:0:0: [sda] Starting disk
[ 1843.716723] PM: resume of devices complete after 3137.175 msecs
[ 1843.717216] PM: Finishing wakeup.
[ 1843.717332] sdhci-pci 0000:04:00.0: no hotplug settings from platform
[ 1843.717350] pci 0000:04:00.2: no hotplug settings from platform
[ 1843.717367] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
[ 1843.717384] pci 0000:04:00.4: no hotplug settings from platform
[ 1843.717415] pci 0000:02:00.0: no hotplug settings from platform
[ 1843.717534] iwlwifi 0000:03:00.0: no hotplug settings from platform
[ 1843.717600] sdhci-pci 0000:04:00.0: no hotplug settings from platform
[ 1843.717617] pci 0000:04:00.2: no hotplug settings from platform
[ 1843.717634] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
[ 1843.717652] pci 0000:04:00.4: no hotplug settings from platform
[ 1843.717217] Restarting tasks ... done.
[ 1843.823451] video LNXVIDEO:00: Restoring backlight state
[ 1843.823456] video LNXVIDEO:01: Restoring backlight state
[ 1844.173075] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:f3:e9:41]
[ 1844.470890] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 1844.478552] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 1844.551544] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1844.554873] alx 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1844.555655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1844.557385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1845.057066] wlan0: authenticate with 54:e6:fc:c3:3b:16
[ 1845.062006] wlan0: send auth to 54:e6:fc:c3:3b:16 (try 1/3)
[ 1845.071593] wlan0: authenticated
[ 1845.071948] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1845.071960] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1845.072798] wlan0: associate with 54:e6:fc:c3:3b:16 (try 1/3)
[ 1845.075493] wlan0: RX AssocResp from 54:e6:fc:c3:3b:16 (capab=0x411 status=0 aid=2)
[ 1845.095002] wlan0: associated
[ 1845.095046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1932.460931] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2057.532386] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2182.706587] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2307.880982] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2433.055311] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2558.229575] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2683.283205] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2808.475948] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 2933.650266] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3058.824772] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3183.896626] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3309.071231] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3434.245609] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3559.419886] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3602.437726] [UFW BLOCK] IN=wlan0 OUT= MAC=9c:4e:36:1d:35:e8:54:e6:fc:c3:3b:16:08:00 SRC=173.194.70.120 DST=192.168.1.102 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=21301 PROTO=TCP SPT=443 DPT=40017 WINDOW=0 RES=0x00 RST URGP=0 
[ 3602.437803] [UFW BLOCK] IN=wlan0 OUT= MAC=9c:4e:36:1d:35:e8:54:e6:fc:c3:3b:16:08:00 SRC=173.194.70.120 DST=192.168.1.102 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=21302 PROTO=TCP SPT=443 DPT=40017 WINDOW=0 RES=0x00 RST URGP=0 
[ 3684.492170] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3809.666445] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 3934.841408] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4060.015395] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4163.598248] systemd-hostnamed[5646]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4185.087263] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4310.261906] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4435.436804] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4560.611161] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4685.683226] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:54:e6:fc:c3:3b:16:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[ 4738.713462] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
[ 4738.921156] wlan0: deauthenticating from 54:e6:fc:c3:3b:16 by local choice (reason=3)
[ 4738.947090] cfg80211: Calling CRDA to update world regulatory domain
[ 4738.951578] cfg80211: World regulatory domain updated:
[ 4738.951584] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4738.951587] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4738.951590] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4738.951592] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4738.951594] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4738.951596] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4739.598313] PM: Syncing filesystems ... done.
[ 4739.759399] PM: Preparing system for mem sleep
[ 4740.080151] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4740.081945] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4740.083159] PM: Entering mem sleep
[ 4740.083221] Suspending console(s) (use no_console_suspend to debug)
[ 4740.083376] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4740.083445] sd 1:0:0:0: [sda] Stopping disk
[ 4741.080868] PM: suspend of devices complete after 996.403 msecs
[ 4741.096884] PM: late suspend of devices complete after 15.994 msecs
[ 4741.113028] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4741.128993] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 4741.160869] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4741.176910] PM: noirq suspend of devices complete after 79.933 msecs
[ 4741.177094] ACPI: Preparing to enter system sleep state S3
[ 4741.177644] PM: Saving platform NVS memory
[ 4741.178251] Disabling non-boot CPUs ...
[ 4741.280948] smpboot: CPU 1 is now offline
[ 4741.385066] smpboot: CPU 2 is now offline
[ 4741.385503] Broke affinity for irq 16
[ 4741.385520] Broke affinity for irq 23
[ 4741.385522] Broke affinity for irq 41
[ 4741.385523] Broke affinity for irq 43
[ 4741.489181] smpboot: CPU 3 is now offline
[ 4741.490385] ACPI: Low-level resume complete
[ 4741.490431] PM: Restoring platform NVS memory
[ 4741.490951] Enabling non-boot CPUs ...
[ 4741.490987] x86: Booting SMP configuration:
[ 4741.490988] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4741.521697] CPU1 is up
[ 4741.521715] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4741.535531] CPU2 is up
[ 4741.535547] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4741.549388] CPU3 is up
[ 4741.552501] ACPI: Waking up from system sleep state S3
[ 4741.582752] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4741.614788] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 4741.646817] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4741.711036] PM: noirq resume of devices complete after 157.595 msecs
[ 4741.711150] PM: early resume of devices complete after 0.090 msecs
[ 4741.711205] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 4741.711466] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4741.923264] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 4742.055289] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4742.057065] ata3.00: configured for UDMA/100
[ 4742.087437] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
[ 4743.089189] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 4744.794414] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4744.800941] ata2.00: failed to enable AA (error_mask=0x1)
[ 4744.807506] ata2.00: failed to enable AA (error_mask=0x1)
[ 4744.807515] ata2.00: configured for UDMA/100
[ 4744.830538] sd 1:0:0:0: [sda] Starting disk
[ 4744.861618] PM: resume of devices complete after 3146.857 msecs
[ 4744.862101] PM: Finishing wakeup.
[ 4744.862199] sdhci-pci 0000:04:00.0: no hotplug settings from platform
[ 4744.862217] pci 0000:04:00.2: no hotplug settings from platform
[ 4744.862233] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
[ 4744.862250] pci 0000:04:00.4: no hotplug settings from platform
[ 4744.862287] pci 0000:02:00.0: no hotplug settings from platform
[ 4744.862354] iwlwifi 0000:03:00.0: no hotplug settings from platform
[ 4744.862467] sdhci-pci 0000:04:00.0: no hotplug settings from platform
[ 4744.862485] pci 0000:04:00.2: no hotplug settings from platform
[ 4744.862501] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
[ 4744.862518] pci 0000:04:00.4: no hotplug settings from platform
[ 4744.862102] Restarting tasks ... done.
[ 4744.970718] video LNXVIDEO:00: Restoring backlight state
[ 4744.970722] video LNXVIDEO:01: Restoring backlight state
[ 4745.104431] usb 4-4: new SuperSpeed USB device number 4 using xhci_hcd
[ 4745.131752] usb 4-4: New USB device found, idVendor=0951, idProduct=168e
[ 4745.131756] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4745.131758] usb 4-4: Product: DT Rubber 3.0
[ 4745.131759] usb 4-4: Manufacturer: Kingston
[ 4745.131761] usb 4-4: SerialNumber: 0018F30C9FEAFDB0E10D0F47
[ 4745.143468] usb-storage 4-4:1.0: USB Mass Storage device detected
[ 4745.143524] scsi8 : usb-storage 4-4:1.0
[ 4745.174680] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:f3:e9:41]
[ 4745.468058] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 4745.476023] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 4745.547518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4745.551007] alx 0000:02:00.0: irq 47 for MSI/MSI-X
[ 4745.551555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4745.553234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4746.018036] wlan0: authenticate with 54:e6:fc:c3:3b:16
[ 4746.023014] wlan0: send auth to 54:e6:fc:c3:3b:16 (try 1/3)
[ 4746.026090] wlan0: authenticated
[ 4746.026265] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 4746.026268] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 4746.027770] wlan0: associate with 54:e6:fc:c3:3b:16 (try 1/3)
[ 4746.030331] wlan0: RX AssocResp from 54:e6:fc:c3:3b:16 (capab=0x411 status=0 aid=2)
[ 4746.050679] wlan0: associated
[ 4746.050707] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4746.204688] scsi 8:0:0:0: Direct-Access     Kingston DT Rubber 3.0    1.00 PQ: 0 ANSI: 6
[ 4746.205283] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 4746.205943] sd 8:0:0:0: [sdb] 30216792 512-byte logical blocks: (15.4 GB/14.4 GiB)
[ 4746.206400] sd 8:0:0:0: [sdb] Write Protect is off
[ 4746.206407] sd 8:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[ 4746.206851] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4746.214186]  sdb:
[ 4746.215664] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4751.348372] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4751.428095] systemd-hostnamed[9465]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4751.628304] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628309] FAT-fs (sdb): Filesystem has been set read-only
[ 4751.628318] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628320] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628322] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628324] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628326] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628328] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628330] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628332] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)
[ 4751.628334] FAT-fs (sdb): error, fat_get_cluster: invalid cluster chain (i_pos 472208)