autostart conky

[Kuba.wok]

Próbowałem każdą metodą zamieszczoną w sieci, uruchamiałem komputer dziesiątki razy i nie działa. Potrafie właczyć autostart każdego programu ale nie tego.

Ma ktoś jakiś sprawdzony sposób?

[umcs]

Nie działa System->Programy startowe i tam dodajesz Conky? Polecam też skrypt opóźniający start Conkyego:

#!/bin/bash
sleep 25 && conky ;

Nazywasz go startupconky.sh i w Programach startowych wpisujesz wtedy w poleceniu /ścieżka_do_skryptu/startupconky.sh
A może masz coś źle w conkyrc? Wtedy może się nie uruchamiać, wpisz w konsoli "conky", może pokaże jakiś bład...

[RA1D3N]

Najlepiej pokaż swój config.

[smogg]

jesli po odpaleniu z konsoli conky dziala bez zarzutu to raczej nie jest to wina .conkyrc i skrypt ze sleepem powinien zalatwic sprawe - jesli nie - podaj config

[Kuba.wok]

config mam nie swój więc powinno działać

# conky configuration
# edited by darcon@gmail.com

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 2.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 1000 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 450
gap_y 1

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(

# mldonkey_hostname Hostname for mldonkey stuff, defaults to localhost
# mldonkey_port Mldonkey port, 4001 default
# mldonkey_login Mldonkey login, default none
# mldonkey_password Mldonkey password, default none


# Possible variables to be used:
#
# Variable Arguments Description

# addr (interface) IP address for an interface
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# alignr (num) Right-justify text, with space of N
# alignc Align text to centre
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
# CPU usage graph, with optional colours in hex,
# minus the #.
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Download speed graph, colours defined in
# hex, minus the #.
# exec shell command Executes a shell command and displays
# the output in conky. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch .
# execbar shell command Same as exec, except if the first value
# return is a value between 0-100, it
# will use that number for a bar.
# The size for the bar is currently fixed,
# but that may change in the future.
# execgraph shell command Same as execbar, but graphs values
# execi interval, shell command
# Same as exec but with specific interval.
# Interval can't be less than
# update_interval in configuration.
# font font Specify a different font. Only applies
# to one line.
# fs_bar (height), (fs)Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or
# temp/tempf (first in C, second in F)
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# if_running (process) if PROCESS is running, display
# everything if_running and the matching $endif
# if_existing (file) if FILE exists, display everything between
# if_existing and the matching $endif
# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
# if_mounted and the matching $endif
# else Text to show if any of the above are not true
# kernel Kernel version
# linkstatus (interface) Get the link status for wireless connections
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
#
# metar_ob_time
# metar_temp
# metar_tempf Temp in F
# metar_windchill
# metar_dew_point There are a bunch of these
# metar_rh and they are self-explanatory
# metar_windspeed
# metar_winddir
# metar_swinddir
# metar_cloud
# metar_u2d_time
#
# ml_upload_counter total session upload in mb
# ml_download_counter total session download in mb
# ml_nshared_files number of shared files
# ml_shared_counter total session shared in mb, buggy
# in some mldonkey versions
# ml_tcp_upload_rate tcp upload rate in kb/s
# ml_tcp_download_rate tcp download rate in kb/s
# ml_udp_upload_rate udp upload rate in kb/s
# ml_udp_download_rate udp download rate in kb/s
# ml_ndownloaded_files number of completed files
# ml_ndownloading_files number of downloading files
#
# mpd_artist Artist in current MPD song
# (must be enabled at compile)
# mpd_album Album in current MPD song
# mpd_bar (height) Bar of mpd's progress
# mpd_bitrate Bitrate of current song
# mpd_status Playing, stopped, et cetera.
# mpd_title Title of current MPD song
# mpd_vol MPD's volume
# mpd_elapsed Song's elapsed time
# mpd_length Song's length
# mpd_percent Percent of song's progress
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# conky displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# offset pixels Move text over by N pixels
# tail logfile, lines (interval)
# Displays last N lines of supplied text
# text file. If interval is not supplied,
# Conky assumes 2x Conky's interval.
# Max of 30 lines.
# Max of 30 lines can be displayed.
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before conky
# has started.
# top type, num This takes arguments in the form:
# top <name> <number>
# Basically, processes are ranked from
# highest to lowest in terms of cpu
# usage, which is what <num> represents.
# The types are: "name", "pid", "cpu", and
# "mem".
# There can be a max of 10 processes listed.
# top_mem type, num Same as top, except sorted by mem usage
# instead of cpu
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Upload speed graph, colours defined in
# hex, minus the #.
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT



${offset 240}${color slate grey}${time %a, } ${color }${time %e %B %G}
${offset 240}${color slate grey}${time %Z, }${color }${time %H:%M:%S}
${offset 240}${color slate grey}UpTime: ${color }$uptime
${offset 240}${color slate grey}Kern:${color }$kernel
${offset 240}${color slate grey}CPU:${color } $cpu% ${acpitemp}C
${offset 240}${cpugraph 20,130 000000 ffffff}
${offset 240}${color slate grey}Load: ${color }$loadavg
${offset 240}${color slate grey}Processes: ${color }$processes
${offset 240}${color slate grey}Running: ${color }$running_processes

${offset 240}${color slate grey}Highest CPU:
${offset 240}${color #ddaa00} ${top name 1}${top_mem cpu 1}
${offset 240}${color lightgrey} ${top name 2}${top cpu 2}
${offset 240}${color lightgrey} ${top name 3}${top cpu 3}
${offset 240}${color lightgrey} ${top name 4}${top cpu 4}

${offset 240}${color slate grey}Highest MEM:
${offset 240}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${offset 240}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${offset 240}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${offset 240}${color lightgrey} ${top_mem name 4}${top_mem mem 4}

${offset 240}${color slate grey}MEM: ${color } $memperc% $mem/$memmax
${offset 240}${membar 3,100}
${offset 240}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
${offset 240}${swapbar 3,100}

${offset 240}${color slate grey}ROOT: ${color }${fs_free /}/${fs_size /}
${offset 240}${fs_bar 3,100 /}
${offset 240}${color slate grey}HOME: ${color }${fs_free /home}/${fs_size /home}
${offset 240}${fs_bar 3,100 /home}
${offset 240}${color slate grey}SLACK: ${color }${fs_free /mnt/slack}/${fs_size /mnt/slack}
${offset 240}${fs_bar 3,100 /mnt/slack}
${offset 240}${color slate grey}NET:
${offset 240}${color}Up: ${color }${upspeed eth0} k/s
${offset 240}${upspeedgraph eth0 20,130 000000 ffffff}
${offset 240}${color}Down: ${color }${downspeed eth0}k/s${color}
${offset 240}${downspeedgraph eth0 20,130 000000 ffffff}

EDIT:
moze miec wpływ że mam właczone uruchamianie autostart gdesklet Compiz Fusion Icon?

[rafaloo]

Próbowałem każdą metodą zamieszczoną w sieci, uruchamiałem komputer dziesiątki razy i nie działa. Potrafie właczyć autostart każdego programu ale nie tego.

Ma ktoś jakiś sprawdzony sposób?

ja z tego postu nic sie nie dowiedziałem. Dokładniej nie wiem czego próbowałeś, a czego nie. tym bardziej nie wieże, że próbowałeś wszystkiego
Sam conky się odpala?

[Kuba.wok]

tak odpala się bez problemu

Próbowałem tak jak dodaje się wszystkie programy programy startowe polecenie /usr/bin/conky

oraz stworzyć plik" #!/bin/bash sleep 25 && conky ; " i do niego ścieżke(polecenie)


nazwe wpisywałem róźną

[smogg]

ale w tym skrypcie nie trzeba sciezki a samo polecenie - conky

Kod: Zaznacz cały

gedit ~/starterconky.sh

tam wklej:

Kod: Zaznacz cały

#!/bin/bash
sleep 25
conky

i do autostartu dodaj ten skrypt, a usun to co wczesniej miales zwiazane z conky i wtedy restart

[Szmitas]

Jeszcze skrypt musi posiadać prawa do uruchomienia jako program. Poczytaj o tym tutaj:
http://www.ubuntu-pomoc.org/conky-opozn ... -programu/

[wobli]

Kod: Zaznacz cały

sudo gedit ~/starterconky.sh

Bez sudo bo stworzysz plik którego włascicielem bedzie root i jako zwykły user go nie uruchomisz.

[Kuba.wok]

Znalazłem conky o 8, jest 22 48 ale działa.

Dziękuje wszystkim.

[Szmitas]

Po raz drugi:
Spróbuj tego - http://www.ubuntu-pomoc.org/conky-opozn ... -programu/ - na pewno działa!

[smogg]

Bez sudo bo stworzysz plik którego włascicielem bedzie root i jako zwykły user go nie uruchomisz.

no tak - moj blad ah to przyzwyczajenie ;p

[gramfan]

skoro temat o autostarcie conky to się podepnę jesli łasa, mój problem trochę inny otóż program startuje wraz z systemem ale w 90% uruchomień conky ma czarne tło i jest ponad wszystkich czyli zawsze na wierzchu...conky ma opóźnienie 10 sekundowe co powinno mu wystarczyć, jeśli ustawiam w autostarcie polecenie "conky" jest tak samo, jakieś rady? mój config:

Kod: Zaznacz cały

background no

#prawy dolny rog
gap_x 0
gap_y 1000

minimum_size 1280
maximum_width 1280

# X font when Xft is disabled, you can pick one with program xfontsel
#font -*-*-*-r-normal--14-*-*-*-c-*-iso8859-2
font -xos4-terminus-*-r-normal-*-12-100-*-*-c-*-iso10646-1

# Use Xft?
use_xft yes

#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:encoding=utf-8:size=9
xftalpha 0.9

update_interval 0.5

total_run_times 0

own_window yes

#own_window_type desktop override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
own_window_type override
own_window_hints undecorated,below,skip_taskbar,


# If own_window_transparent is set to no, you can set the background colour here
own_window_colour black

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
stippled_borders 8
border_margin 1
border_width 1

default_color white
default_shade_color black
default_outline_color black

alignment top_left
no_buffers yes
uppercase no

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

use_spacer none

TEXT
${color #ddaa00}${hr 1}
${voffset -9}${font :encoding=iso8859-2:size=6}${color #0077ff}DATE: ${color #ddaa00}${time %A %e %B %G} | ${color #0077ff}UpTime: ${color #ddaa00}$uptime | ${color #0077ff}CPU1: ${color #ddaa00}${cpu cpu1}% ${color #0077ff}CPU2: ${color #ddaa00}${cpu cpu2}% ${color #0077ff}TEMP: ${color #ddaa00}${hwmon temp 1}°C $running_processes/$processes | ${color #0077ff}RAM: ${color #ddaa00}${membar 5,30} $memperc% | ${color #0077ff}SWAP: ${color #ddaa00}${swapbar 5,30} $swapperc% | ${color #0077ff}/ROOT: ${color #ddaa00}${fs_bar 5,50 /} ${fs_used_perc /}% ${color #0077ff}/HOME:${color #ddaa00}${fs_bar 5,50 /home} ${fs_used_perc /home}% | ${color #0077ff}DOWN: ${color #ddaa00}${downspeedf hso0}kb/s Total: ${totaldown hso0} ${color #0077ff}UP: ${color #ddaa00}${upspeedf hso0}kb/s Total: ${totalup hso0} ${color #0077ff}IP: ${color #ddaa00}${addr hso0}|
${voffset -5}${hr 1}

[Szmitas]

Zamień to:

own_window_hints undecorated,below,skip_taskbar,

na to:

Kod: Zaznacz cały

own_window_hints undecorate,sticky,skip_taskbar,skip_pager

oraz usuń to:

own_window_colour black

Sprawdź czy działa.

[ave3]

wypróbowałem wszystkiego tzn.

1.

Kod: Zaznacz cały

#!/bin/bash
sleep 15
conky
(po conky z enterem i bez)

2. samo

Kod: Zaznacz cały

sleep 10 && conky

3. za kazdym razem robilem - chmod +x nazwapliku
4. wpisywalem w autostarcie "conky" (W tym przypadku po restarcie conky sie pojawia ale po kilku sekundach znika. Znika ale i tak nie było pogody, bo internet ładuje się chwilkę później)

I nic
Zauważyłem, że czasami po ponownym uruchomieniu znika z programów startowych to co dodałem... czasami musze 2 razy dodawać, bo inaczej nic się nie dodaje ...

ma ktoś jakiś pomysł??

[RA1D3N]

A spróbuj dodać takie coś

Kod: Zaznacz cały

own_window yes
own_window_type conky

[umcs]

A może po prostu za mało sleep dałem. Kiedyś aby Conky nie znikał (też się pojawiał na chwilkę, tak jak u Ciebie) musiałem ustawić sleep na 25 sek bo przykrywała go tapeta (chyba). W autostarcie musisz dać

sh /ściażka/do/pliku/autostart.sh

Ze znikaniem z autostartu wpisów to też tak miałem z kilkoma aplikacjami. Nie wiem od czego to. Co do pogody to pojawi się chwilę potem jak połączy się z netem. Powinno tak być...
Plik autostartu Conkego powinien wyglądać raczej tak:

sleep 25 && conky

Po "conky" mam wstawiony jeszcze enter.

[ave3]

dzięki. zadziałało bez entera po conky.. wcześniej nie wpisywałem sh przed ścieżką. Tylko tak nawiasem... conky działa ok już, ale po uruchomieniu, po tym jak się zaloguje, widzę przez ułamek sekundy conky, później znika (to nie jest ten concy co dodałem do autostartu, bo jak wywalę to co dodałem to on nadal jest) i w tym samym momencie tez ułamek sek, widzę jakąś tabliczkę na ekranie... może coś mi się uruchamia ale jak to wyłączyć ? skoro nie ma tego w programach startowych ?? ... trochę nie do tematu.. ale dzięki:)