Uruchamiając komputer z zainstalowaną kartą sieciową EW-7318Usg wszytko jest w idealnym porządku - karta działa bez zarzutu. W momencie podłączenia kamery natychmiast wywala magistralę usb.
lsusb
Kod: Zaznacz cały
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 046d:09a1 Logitech, Inc. QuickCam Communicate MP/S5500
Bus 001 Device 004: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 03f0:3404 Hewlett-Packard DeskJet 6122
Bus 003 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubKod: Zaznacz cały
phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x040c with error -108.Usunięcie modułu rt73usb przerywa generowanie powyższego błędu.
dmesg
Kod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=05a4e4f0-b860-46e5-bd26-f56707c84630 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 6.280521] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3404
[ 6.280538] usbcore: registered new interface driver usblp
[ 6.421643] cfg80211: World regulatory domain updated:
[ 6.421646] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.421649] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.421652] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.421654] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.421656] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.421658] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.504114] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS...
[ 6.504323] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 6.508773] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.508824] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 6.588172] __ratelimit: 3 callbacks suppressed
[ 6.588175] type=1505 audit(1257267359.603:12): operation="profile_replace" pid=922 name=/usr/share/gdm/guest-session/Xsession
[ 6.589352] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 6.589357] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 6.589402] usbcore: registered new interface driver rt2500usb
[ 6.595952] type=1505 audit(1257267359.613:13): operation="profile_replace" pid=927 name=/sbin/dhclient3
[ 6.596214] type=1505 audit(1257267359.613:14): operation="profile_replace" pid=927 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.596360] type=1505 audit(1257267359.613:15): operation="profile_replace" pid=927 name=/usr/lib/connman/scripts/dhclient-script
[ 6.599067] type=1505 audit(1257267359.613:16): operation="profile_replace" pid=928 name=/usr/bin/evince
[ 6.603160] type=1505 audit(1257267359.623:17): operation="profile_replace" pid=928 name=/usr/bin/evince-previewer
[ 6.605618] type=1505 audit(1257267359.623:18): operation="profile_replace" pid=928 name=/usr/bin/evince-thumbnailer
[ 6.610753] type=1505 audit(1257267359.633:19): operation="profile_replace" pid=930 name=/usr/lib/cups/backend/cups-pdf
[ 6.611077] type=1505 audit(1257267359.633:20): operation="profile_replace" pid=930 name=/usr/sbin/cupsd
[ 6.612730] type=1505 audit(1257267359.633:21): operation="profile_replace" pid=931 name=/usr/sbin/tcpdump
[ 6.862663] phy1: Selected rate control algorithm 'minstrel'
[ 6.863299] Registered led device: rt73usb-phy1::radio
[ 6.863317] Registered led device: rt73usb-phy1::assoc
[ 6.863333] Registered led device: rt73usb-phy1::quality
[ 6.864610] usbcore: registered new interface driver rt73usb
[ 8.262941] ppdev: user-space parallel port driver
[ 8.709253] r8169: eth0: link down
[ 8.709729] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.753380] rt73usb 1-4:1.0: firmware: requesting rt73.bin
[ 8.929073] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.870112] usplash:441 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
[ 10.932920] usb 3-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 15.271739] [fglrx] GART Table is not in FRAME_BUFFER range
[ 15.271866] alloc irq_desc for 28 on node 0
[ 15.271868] alloc kstat_irqs on node 0
[ 15.271878] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[ 15.272317] [fglrx] Firegl kernel thread PID: 1540
[ 16.142144] [fglrx] Gart USWC size:1158 M.
[ 16.142148] [fglrx] Gart cacheable size:459 M.
[ 16.142153] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.142156] [fglrx] Reserved FB block: Unshared offset:17ffc000, size:4000
[ 19.711716] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 38.314045] wlan0: authenticate with AP 00:18:f3:85:61:79
[ 38.315774] wlan0: authenticated
[ 38.315778] wlan0: associate with AP 00:18:f3:85:61:79
[ 38.318013] wlan0: RX AssocResp from 00:18:f3:85:61:79 (capab=0x411 status=0 aid=1)
[ 38.318016] wlan0: associated
[ 38.331713] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.620006] wlan0: no IPv6 routers present
[ 392.180024] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 392.451598] usb 1-5: configuration #1 chosen from 1 choice
[ 392.531605] Linux video capture interface: v2.00
[ 392.553902] usbcore: registered new interface driver snd-usb-audio
[ 392.566426] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 392.585175] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input6
[ 392.585259] usbcore: registered new interface driver uvcvideo
[ 392.585265] USB Video Class driver (v0.1.0)
[ 392.641213] ehci_hcd 0000:00:12.2: force halt; handhake ffffc9000063a024 00004000 00000000 -> -110
[ 392.641223] cannot submit datapipe for urb 1, error -108: device disabled
[ 392.982587] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c0 with error -108.
[ 392.982620] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c4 with error -108.
[ 393.982579] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c0 with error -108.
...
...
...
[ 399.983390] phy1 -> rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff
[ 400.932787] usbcore: deregistering interface driver rt73usb
[ 400.932969] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -108.
[ 400.933000] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -108.
[ 400.933384] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -108.Kod: Zaznacz cały
[ 6.729922] type=1505 audit(1257268501.745:21): operation="profile_replace" pid=900 name=/usr/sbin/tcpdump
[ 8.294243] ppdev: user-space parallel port driver
[ 8.920300] r8169: eth0: link down
[ 8.920775] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.953387] rt73usb 1-4:1.0: firmware: requesting rt73.bin
[ 9.217104] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.704604] usplash:418 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
[ 10.752196] usb 3-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 14.062401] [fglrx] GART Table is not in FRAME_BUFFER range
[ 14.062536] alloc irq_desc for 28 on node 0
[ 14.062538] alloc kstat_irqs on node 0
[ 14.062547] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[ 14.062996] [fglrx] Firegl kernel thread PID: 1478
[ 14.937479] [fglrx] Gart USWC size:1158 M.
[ 14.937483] [fglrx] Gart cacheable size:459 M.
[ 14.937489] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.937492] [fglrx] Reserved FB block: Unshared offset:17ffc000, size:4000
[ 18.640668] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 42.226265] wlan0: authenticate with AP 00:18:f3:85:61:79
[ 42.228027] wlan0: authenticated
[ 42.228029] wlan0: associate with AP 00:18:f3:85:61:79
[ 42.230279] wlan0: RX AssocResp from 00:18:f3:85:61:79 (capab=0x411 status=0 aid=1)
[ 42.230282] wlan0: associated
[ 42.244224] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 53.170006] wlan0: no IPv6 routers present
[ 3036.728887] usb 1-4: USB disconnect, address 4
[ 3036.729115] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
...
[ 3036.752543] wlan0: deauthenticating by local choice (reason=3)
...
[ 3036.752784] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0408 with error -19.
[ 3101.120032] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 3101.390924] usb 1-5: configuration #1 chosen from 1 choice
[ 3101.490052] Linux video capture interface: v2.00
[ 3101.518971] usbcore: registered new interface driver snd-usb-audio
[ 3101.519210] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 3101.548593] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input6
[ 3101.548640] usbcore: registered new interface driver uvcvideo
[ 3101.548643] USB Video Class driver (v0.1.0)
[ 3148.026484] usb 1-5: USB disconnect, address 5
[ 3180.190049] usb 1-4: new high speed USB device using ehci_hcd and address 6
[ 3180.473839] usb 1-4: configuration #1 chosen from 1 choice
[ 3180.584044] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 3180.584057] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 3180.848651] phy3: Selected rate control algorithm 'minstrel'
[ 3180.849775] Registered led device: rt73usb-phy3::radio
[ 3180.849801] Registered led device: rt73usb-phy3::assoc
[ 3180.849826] Registered led device: rt73usb-phy3::quality
[ 3180.863709] rt73usb 1-4:1.0: firmware: requesting rt73.bin
[ 3180.978296] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3188.796352] wlan0: authenticate with AP 00:18:f3:85:61:79
[ 3188.797874] wlan0: authenticated
[ 3188.797878] wlan0: associate with AP 00:18:f3:85:61:79
[ 3188.800101] wlan0: RX AssocResp from 00:18:f3:85:61:79 (capab=0x411 status=0 aid=1)
[ 3188.800106] wlan0: associated
[ 3188.816081] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3199.362509] wlan0: no IPv6 routers present
[ 3208.566955] usb 1-4: USB disconnect, address 6
[ 3208.567193] phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
...
[ 3208.592556] wlan0: deauthenticating by local choice (reason=3)
..
[ 3208.592794] phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0408 with error -19.
[ 3223.040030] usb 1-5: new high speed USB device using ehci_hcd and address 7
[ 3223.307656] usb 1-5: configuration #1 chosen from 1 choice
[ 3223.308483] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 3223.341190] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input7
[ 3247.421759] usb 1-5: USB disconnect, address 7
[ 3254.640022] usb 1-4: new high speed USB device using ehci_hcd and address 8
[ 3254.926013] usb 1-4: configuration #1 chosen from 1 choice
[ 3255.037097] phy4 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[ 3255.037108] phy4 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 3255.301443] phy5: Selected rate control algorithm 'minstrel'
[ 3255.302635] Registered led device: rt73usb-phy5::radio
[ 3255.302660] Registered led device: rt73usb-phy5::assoc
[ 3255.302692] Registered led device: rt73usb-phy5::quality
[ 3255.318848] rt73usb 1-4:1.0: firmware: requesting rt73.bin
[ 3255.438600] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3263.221293] wlan0: authenticate with AP 00:18:f3:85:61:79
[ 3263.223055] wlan0: authenticated
[ 3263.223060] wlan0: associate with AP 00:18:f3:85:61:79
[ 3263.225288] wlan0: RX AssocResp from 00:18:f3:85:61:79 (capab=0x411 status=0 aid=1)
[ 3263.225292] wlan0: associated
[ 3263.240905] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes readyW czym może tkwić problem?
Pozdrawiam
Meteoto
EDIT:
Problem w gruncie rzeczy dotyczy utraty magistrali USB. Jest on znany już od dawna i nadal pozostaje nierozwiązany.
Poniższy link może rozjaśnić nieco temat http://ubuntuforums.org/showthread.php? ... kernel+BUG