Specyfikację do płytki znalazłem tu: http://www.mercury-pc.com/product-detai ... oductid=53#
lspci zwraca mi:
Kod: Zaznacz cały
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 70)
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
Kod: Zaznacz cały
Module Size Used by
savage 29488 2
drm 162599 3 savage
binfmt_misc 6587 1
snd_wavefront 33066 0
snd_cs4236 25514 0
snd_wss_lib 23410 2 snd_wavefront,snd_cs4236
snd_opl3_lib 8966 2 snd_wavefront,snd_cs4236
snd_via82xx 20058 2
snd_hwdep 5412 2 snd_wavefront,snd_opl3_lib
snd_ac97_codec 100646 1 snd_via82xx
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
ac97_bus 1002 1 snd_ac97_codec
snd_seq_dummy 1338 0
snd_pcm 70662 5 snd_cs4236,snd_wss_lib,snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 7172 3 snd_wss_lib,snd_via82xx,snd_pcm
snd_mpu401 5123 0
snd_seq_oss 26726 0
fbcon 35102 71
snd_mpu401_uart 5617 4 snd_wavefront,snd_cs4236,snd_via82xx,snd_mpu401
tileblit 2031 1 fbcon
snd_seq_midi 4557 0
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
snd_rawmidi 19056 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
ns558 3056 0
vga16fb 11385 1
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
i2c_viapro 5573 0
snd_seq_device 5700 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev 5259 0
lp 7028 0
via_ircc 21937 0
vgastate 8961 1 vga16fb
psmouse 62957 0
parport_pc 26058 1
snd 54148 21 snd_wavefront,snd_cs4236,snd_wss_lib,snd_opl3_lib,snd_via82xx,snd_hwdep,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401,snd_seq_oss,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
gameport 9089 3 snd_via82xx,ns558
via_agp 5310 1
parport 32635 3 ppdev,lp,parport_pc
irda 186556 1 via_ircc
soundcore 6620 1 snd
serio_raw 3978 0
shpchp 28820 0
crc_ccitt 1339 1 irda
agpgart 31724 2 drm,via_agp
8139too 18705 0
via_rhine 19378 0
8139cp 16282 0
pata_via 7272 2
mii 4381 3 8139too,via_rhine,8139cp
floppy 53016 0
-- 24 cze 2011 10:16 --
Odgrzeje troche stary temat. Teraz mam Ubuntu 10.04, wygenerowałem plik xorg.conf i nieco go zmodyfikowałem, ale niestety nie znajduje mi karty graficznej.
Poniżej plik xorg.conf
Kod: Zaznacz cały
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "extmod"
Load "record"
Load "dri2"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
option "DPMS"
HorizSync 30-96
VertRefresh 50-150
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Option "UseFBDev" "true"
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "ViRGE/DX or /GX"
BusID "PCI:00:0b:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
DefaultDepth 16
SubSection "Display"
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Kod: Zaznacz cały
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.32-32-generic #62-Ubuntu SMP Wed Apr 20 21:54:21 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-generic root=UUID=c78d9582-dd0a-47fe-8631-fb65e710dbed ro single
Build Date: 08 March 2011 08:22:50AM
xorg-server 2:1.7.6-2ubuntu7.6 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 24 12:05:15 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81f1e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI:*(0:0:11:0) 5333:8a01:5333:8a01 S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xdc000000/67108864, BIOS @ 0x????????/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.7.2, module version = 2.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) SAVAGE: driver (version 2.3.1) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 00@00:0b:0
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
ddxSigGiveUp: BusID "PCI:00:0b:0"
BusID "PCI:00@00:0b:0" i tp ale zawsze ten sam błąd. Bardzo proszę o jakąś wskazówkę. Sprzęt i jego konfiguracja nadal ta sama. Xy wstają jak wywalę xorg.conf, ale jest za słaba częstotliwość, tylko 60Hz i nie da się ją zmienić narzędziem graficznym LXRandR 0.1.1. Na niej mi najbardziej zależy.
Sorki ale wprowadziłem cię w błąd. Jednak zmiany są. Wyłączyłem zintegrowaną grafę. Oto aktualny wynik lspci :
. Czy generowanie specjalnie pod tą maszynę pliku xorg.conf programem Dexconf albo czymś innym miałoby sęs? Albo może instalowanie windowsowych sterowników ndiswraperem?