NOT LV5TDeluxe (RTL 2832u) do odbioru DVB-T na ubuntu 12.10

[Chemical Attack]

Witam,
po aktualizacji Ubuntu do wersji 12.10 straciłem możliwość wykorzystywania mojego dongla do odbioru telewizji cyfrowej. Przy poprzednich aktualizacjach jądra wystarczało przeprowadzić procedurę którą opisałem na dobrych programach:

http://www.dobreprogramy.pl/Tuner-DVBT- ... 33178.html

w tej chwili to nie wystarcza. Zapewne z faktu iż makefile można było modyfikować do jądra wersji 3.2.x.x Czy może komuś już udało się już znaleźć rozwiązanie tego zagadnienia?

[ilin]

Zawsze możesz wrzucić starsze jądro.

Pokaż

Kod: Zaznacz cały

lsusb

zobaczymy ID tego dągla.

[Chemical Attack]

Proszę Cię bardzo:

Bus 002 Device 004: ID 1f4d:c803 G-Tek Electronics Group

[ilin]

Ciekawi mnie jedna sprawa czy nie ruszy przypadkiem na tym

Kod: Zaznacz cały

root@debian:/home/ilin# modinfo dvb-usb-rtl28xxu
filename:       /lib/modules/3.6-3.slh.1-aptosid-amd64/kernel/drivers/media/dvb/dvb-usb/dvb-usb-rtl28xxu.ko
license:        GPL
author:         Thomas Mair <thomas.mair86@googlemail.com>
author:         Antti Palosaari <crope@iki.fi>
description:    Realtek RTL28xxU DVB USB driver
srcversion:     3008A66FCCBC0B1DED3D76C
alias:          usb:v0CCDp00B3d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1F4DpB803d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp00A9d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v14AAp0161d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v14AAp0160d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp2831d*dc*dsc*dp*ic*isc*ip*in*
depends:        dvb-usb,rtl2830,usbcore,rc-core
intree:         Y
vermagic:       3.6-3.slh.1-aptosid-amd64 SMP preempt mod_unload modversions 
parm:           debug:set debugging level (debugging is not enabled) (int)
parm:           adapter_nr:DVB adapter numbers (array of short)

Kod: Zaznacz cały

alias:          usb:v1F4DpB803d*dc*dsc*dp*ic*isc*ip*in*

Jedna literka inna ale to ta sama rodzina kart.

[Chemical Attack]

Jak mi napiszesz jak to zainstalować to mogę spróbować:D

-- 23 paź 2012, o 20:59 --

A tak na marginesie.. tutaj piszą o tym sterowniku że będzie wbudowany:

http://osworld.pl/jadro-linux-3-6/

Czy to znaczy że od jądra 3.6 linux z automatu będzie miał te stery i nie będę już musiał za każdym razem robić reinstalacji??

[ilin]

Jakie masz obecnie jądro ?
Pokaż

Kod: Zaznacz cały

uname -a

[luk1don]

Właśnie robiłem kernela 3.6.3. Moduł do rtl 2832 siedzi sobie w konfigu:

Kod: Zaznacz cały

config DVB_RTL2832
tristate "Realtek RTL2832 DVB-T"
depends on DVB_CORE && I2C
default m if DVB_FE_CUSTOMISE
help
Say Y when you want to support this frontend.

/drivers/media/dvb/frontends/
Zainstaluj jakiś kernel "mulitmedialny" z wkompilowaną tą opcją: może slh ma to, albo siduction, liquorix abo sam skompiluj...
W 3.7 też jest ale trochę indziej.

[ilin]

Kernel od aptosida to ma.

Kod: Zaznacz cały

ilin@debian:~$ cat /boot/config-3.6-3.slh.1-aptosid-amd64 | grep 2832
CONFIG_DVB_RTL2832=m

[luk1don]

To byś mu dał linka do paczek deb...

-- wtorek, 23 października 2012, 21:30 --

Bierz co chcesz:
http://aptosid.com/debian/pool/main/l/linux-aptosid/

[ilin]

repo

Kod: Zaznacz cały

deb http://debian.tu-bs.de/project/aptosid/debian/ sid main fix.main

Ale nie daję głowy że na ubuntu czysto to wejdzie.

[Chemical Attack]

Ok. Panowie dziękuję za pomoc, ale powiem szczerze że w życiu kernela nie instalowałem, więc gdyby ktoś krok po kroku opisał mi jak mam to robić byłbym mu nieocenienie wdzięczny..
Czy po instalacji kernela jeszcze coś będę musiał grzebać notatnikiem w plikach??

[ilin]

Dopisujesz do pliku /etc/apt/sources.list

Kod: Zaznacz cały

deb http://debian.tu-bs.de/project/aptosid/debian/ sid main fix.main

Potem

Kod: Zaznacz cały

sudo aptitude update

Jeśli nie masz aptitude to zainstaluj.

(mozna użyć ap-get ale ja bardziej ufam aptitude)

Potem

Kod: Zaznacz cały

aptitude search linux-image

Pokaże coś w tym stylu

Kod: Zaznacz cały

ilin@debian:~$ aptitude search linux-image
v   linux-image                            -                                                  
v   linux-image:i386                       -                                                  
p   linux-image-2.6-486:i386               - Linux for older PCs (dummy package)              
p   linux-image-2.6-686:i386               - Linux dla nowoczesnych pecetów (metapakiet)      
p   linux-image-2.6-686-bigmem:i386        - Linux do komputerów z więcej niz 4 GB RAM-u (paki
p   linux-image-2.6-686-pae:i386           - Linux dla nowoczesnych pecetów (metapakiet)      
p   linux-image-2.6-amd64                  - Linux for 64-bit PCs (dummy package)             
p   linux-image-2.6-amd64:i386             - Linux for 64-bit PCs (dummy package)             
p   linux-image-3.2.0-3-486:i386           - Linux 3.2 for older PCs                          
p   linux-image-3.2.0-3-686-pae:i386       - Linux 3.2 for modern PCs                         
p   linux-image-3.2.0-3-686-pae-dbg:i386   - Debugging infos for Linux 3.2.0-3-686-pae        
p   linux-image-3.2.0-3-amd64              - Linux 3.2 for 64-bit PCs                         
p   linux-image-3.2.0-3-amd64:i386         - Linux 3.2 for 64-bit PCs                         
p   linux-image-3.2.0-3-amd64-dbg          - Debugging infos for Linux 3.2.0-3-amd64          
p   linux-image-3.2.0-3-rt-686-pae:i386    - Linux 3.2 for modern PCs, PREEMPT_RT             
p   linux-image-3.2.0-3-rt-686-pae-dbg:i38 - Debugging infos for Linux 3.2.0-3-rt-686-pae     
p   linux-image-3.2.0-3-rt-amd64           - Linux 3.2 for 64-bit PCs, PREEMPT_RT             
p   linux-image-3.2.0-3-rt-amd64-dbg       - Debugging infos for Linux 3.2.0-3-rt-amd64       
p   linux-image-3.6-3.slh.2-aptosid-686:i3 - Linux 3.6 for modern PCs                         
i   linux-image-3.6-3.slh.2-aptosid-amd64  - Linux 3.6 for 64-bit PCs                         
p   linux-image-486:i386                   - Jądro Linux do starszych komputerów (metapakiet) 
p   linux-image-686:i386                   - Linux dla nowoczesnych pecetów (metapakiet)      
p   linux-image-686-bigmem:i386            - Linux do komputerów z więcej niz 4 GB RAM-u (paki
p   linux-image-686-pae:i386               - Linux for modern PCs (meta-package)              
p   linux-image-amd64                      - Jądro Linux do komputerów 64-bitowych (metapakiet
p   linux-image-amd64:i386                 - Jądro Linux do komputerów 64-bitowych (metapakiet
p   linux-image-aptosid-686:i386           - Linux image for aptosid on modern PCs            
p   linux-image-aptosid-amd64              - Linux image for aptosid on 64-bit PCs            
p   linux-image-rt-686-pae:i386            - Linux for modern PCs (meta-package), PREEMPT_RT  
p   linux-image-rt-amd64 

Instalujesz tego od aptosida(zakładam ,że masz system 32 bit)

Kod: Zaznacz cały

aptitude install linux-image-3.6-3.slh.2-aptosid-686 linux-headers-3.6-3.slh.2-aptosid-686

Jak sie będzie pluło o brak podpisu to zignoruj to.

Powinno samo dopisac sie do gruba.
Restartujesz kompa i uruchamiasz z nowego kernela.

[Chemical Attack]

Więc sprawa ma się tak:
zainstalowałem jądro które mi podrzuciłeś, coś tam się burzył, za pierwszym odpaleniem komp się zwiesił, ale za drugim poszło już normalnie..
Wetknąłem stick i niestety pokazało mi że device not found więc dalej nie wykrywa.
Czy zatem teraz mam wejść do tego pliku CONFIG i tam zmienić literkę m na jakąś inną??
Jeszcze takie pytanko.. jak teraz będzie wyglądała sprawa dostarczanych aktualizacji z tym jądrem?? Jak wyjdzie nowsze jądro to te normalnie się zaktualizuje??

[ilin]

Odpal z włozonym stickiem.

Potem pokaż

Kod: Zaznacz cały

dmesg | grep dvb

[Chemical Attack]

Małe sprostowanko.. z tym jądrem jest coś nie tak, bo komp czasem zawiesza mi się przed wczytaniem ekranu logowania:((((
Tak w kwestii formalności.. jak przywrócić poprzedni kernel??

[ilin]

Przeciez masz poprzedni kernel.
Nie ma go w grubie do wyboru ?

[luk1don]

Małe sprostowanko.. z tym jądrem jest coś nie tak, bo komp czasem zawiesza mi się przed wczytaniem ekranu logowania:((((
Tak w kwestii formalności.. jak przywrócić poprzedni kernel??

Tak z ciekawości: z kompilacją jesteś "za pan brat" a takich podstawowych rzeczy nie potrafisz... Ile już używasz Linuksa? Zaznajom się trochę z Linuksem;-)

[Chemical Attack]

Dlaczego za Pan brat z kompilacją jestem??
Ubuntu mam niecały rok.. a do codziennego użytku zaprzęgam go od jakichś 8 miesięcy..

-- 25 paź 2012, o 09:39 --

dmesg:

Kod: Zaznacz cały

[    0.237564] pnp 00:04: [io  0x002e-0x002f]
[    0.237565] pnp 00:04: [io  0x004e-0x004f]
[    0.237567] pnp 00:04: [io  0x0061]
[    0.237568] pnp 00:04: [io  0x0063]
[    0.237570] pnp 00:04: [io  0x0065]
[    0.237571] pnp 00:04: [io  0x0067]
[    0.237572] pnp 00:04: [io  0x0068]
[    0.237574] pnp 00:04: [io  0x006c]
[    0.237575] pnp 00:04: [io  0x0070]
[    0.237577] pnp 00:04: [io  0x0080]
[    0.237578] pnp 00:04: [io  0x0092]
[    0.237579] pnp 00:04: [io  0x00b2-0x00b3]
[    0.237581] pnp 00:04: [io  0x0680-0x069f]
[    0.237582] pnp 00:04: [io  0x1000-0x1003]
[    0.237584] pnp 00:04: [io  0x1004-0x1013]
[    0.237585] pnp 00:04: [io  0xffff]
[    0.237587] pnp 00:04: [io  0x0400-0x0453]
[    0.237588] pnp 00:04: [io  0x0458-0x047f]
[    0.237590] pnp 00:04: [io  0x0500-0x057f]
[    0.237591] pnp 00:04: [io  0x164e-0x164f]
[    0.237626] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.237629] system 00:04: [io  0x1000-0x1003] has been reserved
[    0.237631] system 00:04: [io  0x1004-0x1013] has been reserved
[    0.237633] system 00:04: [io  0xffff] has been reserved
[    0.237634] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.237636] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.237638] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.237640] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.237643] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237650] pnp 00:05: [io  0x0070-0x0077]
[    0.237654] pnp 00:05: [irq 8]
[    0.237673] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.237696] pnp 00:06: [io  0x0454-0x0457]
[    0.237724] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.237727] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.237759] pnp 00:07: [io  0x0060]
[    0.237761] pnp 00:07: [io  0x0064]
[    0.237766] pnp 00:07: [irq 1]
[    0.237785] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.237814] pnp 00:08: [irq 12]
[    0.237833] pnp 00:08: Plug and Play ACPI device, IDs DLL04c4 PNP0f13 (active)
[    0.237918] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.237920] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[    0.237922] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.237923] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.237925] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[    0.237926] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.237928] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    0.237929] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    0.237931] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.237932] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.237934] pnp 00:09: [mem 0xfff00000-0xfff00fff]
[    0.237969] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.237971] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.237973] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.237975] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.237977] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.237979] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.237981] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.237983] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.237985] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.237987] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.237989] system 00:09: [mem 0xfff00000-0xfff00fff] has been reserved
[    0.237992] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238189] pnp: PnP ACPI: found 10 devices
[    0.238190] ACPI: ACPI bus type pnp unregistered
[    0.244542] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.244573] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[    0.244576] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.244578] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.244581] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.244584] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.244587] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.244592] pci 0000:00:1c.0:   bridge window [mem 0xf1a00000-0xf1afffff]
[    0.244601] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.244606] pci 0000:00:1c.2:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.244615] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.244618] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.244625] pci 0000:00:1c.4:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.244655] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.244657] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.244659] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.244661] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.244662] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.244664] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.244666] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    0.244668] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.244670] pci_bus 0000:02: resource 1 [mem 0xf1a00000-0xf1afffff]
[    0.244671] pci_bus 0000:03: resource 1 [mem 0xf1900000-0xf19fffff]
[    0.244673] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.244675] pci_bus 0000:04: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.244705] NET: Registered protocol family 2
[    0.245311] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.246458] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.246584] TCP: Hash tables configured (established 524288 bind 65536)
[    0.246602] TCP: reno registered
[    0.246614] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.246642] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.246733] NET: Registered protocol family 1
[    0.246748] pci 0000:00:02.0: Boot video device
[    0.246916] PCI: CLS 64 bytes, default 64
[    0.246950] Unpacking initramfs...
[    0.480223] Freeing initrd memory: 12664k freed
[    0.482257] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.482262] software IO TLB [mem 0xb6c84000-0xbac83fff] (64MB) mapped at [ffff8800b6c84000-ffff8800bac83fff]
[    0.482298] Simple Boot Flag at 0x66 set to 0x1
[    0.482669] audit: initializing netlink socket (disabled)
[    0.482683] type=2000 audit(1351157073.366:1): initialized
[    0.483200] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.485283] VFS: Disk quotas dquot_6.5.2
[    0.485323] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.485411] msgmni has been set to 15771
[    0.485623] alg: No test for stdrng (krng)
[    0.485665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.485689] io scheduler noop registered
[    0.485691] io scheduler deadline registered
[    0.485717] io scheduler cfq registered (default)
[    0.485816] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.486024] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.486025] vesafb: scrolling: redraw
[    0.486027] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.486229] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005600000, using 3072k, total 3072k
[    0.538341] Console: switching to colour frame buffer device 128x48
[    0.590357] fb0: VESA VGA frame buffer device
[    0.590369] intel_idle: MWAIT substates: 0x21120
[    0.590371] intel_idle: v0.4 model 0x2A
[    0.590372] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.590404] GHES: HEST is not enabled!
[    0.590450] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.590846] Linux agpgart interface v0.103
[    0.590901] libphy: Fixed MDIO Bus: probed
[    0.590935] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.595198] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.595207] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.595290] mousedev: PS/2 mouse device common for all mice
[    0.595432] rtc_cmos 00:05: RTC can wake from S4
[    0.595549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.595576] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.595653] cpuidle: using governor ladder
[    0.595747] cpuidle: using governor menu
[    0.595979] EFI Variables Facility v0.08 2004-May-17
[    0.596070] TCP: cubic registered
[    0.596158] NET: Registered protocol family 10
[    0.596343] Key type dns_resolver registered
[    0.596705] registered taskstats version 1
[    0.597043] IMA: No TPM chip found, activating TPM-bypass!
[    0.597543] rtc_cmos 00:05: setting system clock to 2012-10-25 09:24:34 UTC (1351157074)
[    0.597754] Freeing unused kernel memory: 664k freed
[    0.600205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.611522] udevd[74]: starting version 175
[    0.638868] thermal LNXTHERM:00: registered as thermal_zone0
[    0.638871] ACPI: Thermal Zone [TZ00] (39 C)
[    0.639137] thermal LNXTHERM:01: registered as thermal_zone1
[    0.639140] ACPI: Thermal Zone [TZ01] (39 C)
[    0.642801] ACPI: bus type usb registered
[    0.642840] usbcore: registered new interface driver usbfs
[    0.642857] usbcore: registered new interface driver hub
[    0.646167] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.646406] r8169 0000:04:00.0: irq 41 for MSI/MSI-X
[    0.646637] r8169 0000:04:00.0: eth0: RTL8105e at 0xffffc90000c7a000, 84:8f:69:be:41:64, XID 00a00000 IRQ 41
[    0.646747] usbcore: registered new device driver usb
[    0.648635] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.648647] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.648852] xhci_hcd 0000:03:00.0: irq 18, io mem 0xf1900000
[    0.648936] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.648945] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.648952] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.648960] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.648967] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.651385] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.651389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.651392] usb usb1: Product: xHCI Host Controller
[    0.651395] usb usb1: Manufacturer: Linux 3.6-3.slh.2-aptosid-amd64 xhci_hcd
[    0.651398] usb usb1: SerialNumber: 0000:03:00.0
[    0.652230] xHCI xhci_add_endpoint called for root hub
[    0.652233] xHCI xhci_check_bandwidth called for root hub
[    0.652275] hub 1-0:1.0: USB hub found
[    0.652285] hub 1-0:1.0: 2 ports detected
[    0.652369] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.652374] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.652420] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.652424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.652426] usb usb2: Product: xHCI Host Controller
[    0.652429] usb usb2: Manufacturer: Linux 3.6-3.slh.2-aptosid-amd64 xhci_hcd
[    0.652431] usb usb2: SerialNumber: 0000:03:00.0
[    0.652433] SCSI subsystem initialized
[    0.652884] xHCI xhci_add_endpoint called for root hub
[    0.652886] xHCI xhci_check_bandwidth called for root hub
[    0.652923] hub 2-0:1.0: USB hub found
[    0.652933] hub 2-0:1.0: 2 ports detected
[    0.653878] ACPI: bus type scsi registered
[    0.653981] libata version 3.00 loaded.
[    0.654696] ahci 0000:00:1f.2: version 3.0
[    0.654779] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.654822] ahci: SSS flag set, parallel bus scan disabled
[    0.666120] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    0.666127] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.666134] ahci 0000:00:1f.2: setting latency timer to 64
[    0.670591] scsi0 : ahci
[    0.670690] scsi1 : ahci
[    0.670772] scsi2 : ahci
[    0.670833] scsi3 : ahci
[    0.670898] scsi4 : ahci
[    0.670959] scsi5 : ahci
[    0.670997] ata1: SATA max UDMA/133 abar m2048@0xf1b08000 port 0xf1b08100 irq 47
[    0.671000] ata2: SATA max UDMA/133 abar m2048@0xf1b08000 port 0xf1b08180 irq 47
[    0.671001] ata3: DUMMY
[    0.671002] ata4: DUMMY
[    0.671005] ata5: SATA max UDMA/133 abar m2048@0xf1b08000 port 0xf1b08300 irq 47
[    0.671006] ata6: DUMMY
[    0.745621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.745678] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.745682] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.745688] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.749592] ehci_hcd 0000:00:1a.0: debug port 2
[    0.749600] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.749616] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1b0a000
[    0.754970] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.755030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.755033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.755035] usb usb3: Product: EHCI Host Controller
[    0.755036] usb usb3: Manufacturer: Linux 3.6-3.slh.2-aptosid-amd64 ehci_hcd
[    0.755038] usb usb3: SerialNumber: 0000:00:1a.0
[    0.755212] hub 3-0:1.0: USB hub found
[    0.755216] hub 3-0:1.0: 2 ports detected
[    0.755303] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.755306] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.755311] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.759211] ehci_hcd 0000:00:1d.0: debug port 2
[    0.759219] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.759238] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1b09000
[    0.764945] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.765007] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.765010] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765011] usb usb4: Product: EHCI Host Controller
[    0.765013] usb usb4: Manufacturer: Linux 3.6-3.slh.2-aptosid-amd64 ehci_hcd
[    0.765014] usb usb4: SerialNumber: 0000:00:1d.0
[    0.765190] hub 4-0:1.0: USB hub found
[    0.765194] hub 4-0:1.0: 2 ports detected
[    0.974489] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.976504] ata1.00: ATA-8: ST9500325AS, D005DEM1, max UDMA/133
[    0.976513] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.978838] ata1.00: configured for UDMA/133
[    0.979160] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      D005 PQ: 0 ANSI: 5
[    1.056323] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[    1.170613] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.170624] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.170899] hub 3-1:1.0: USB hub found
[    1.170953] hub 3-1:1.0: 6 ports detected
[    1.273731] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[    1.283779] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.287282] ata2.00: ATAPI: HL-DT-ST DVD+-RW GT50N, A101, max UDMA/133
[    1.292840] ata2.00: configured for UDMA/133
[    1.301896] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GT50N    A101 PQ: 0 ANSI: 5
[    1.388121] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.388132] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.388400] hub 4-1:1.0: USB hub found
[    1.388490] hub 4-1:1.0: 8 ports detected
[    1.462615] usb 3-1.1: new high-speed USB device number 3 using ehci_hcd
[    1.481322] tsc: Refined TSC clocksource calibration: 2491.906 MHz
[    1.481334] Switching to clocksource tsc
[    1.561958] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=0138
[    1.561969] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.561975] usb 3-1.1: Product: USB2.0-CRW
[    1.561980] usb 3-1.1: Manufacturer: Generic
[    1.561985] usb 3-1.1: SerialNumber: 20090516388200000
[    1.569793] usbcore: registered new interface driver uas
[    1.606045] ata5: SATA link down (SStatus 0 SControl 300)
[    1.607196] Initializing USB Mass Storage driver...
[    1.607265] usbcore: registered new interface driver usb-storage
[    1.607267] USB Mass Storage support registered.
[    1.611264] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.611298] sd 0:0:0:0: [sda] Write Protect is off
[    1.611301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.611315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.616011] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.616014] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.616136] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.627305] scsi6 : usb-storage 3-1.1:1.0
[    1.627368] usbcore: registered new interface driver ums-realtek
[    1.641079] usb 3-1.4: new high-speed USB device number 4 using ehci_hcd
[    1.703315]  sda: sda1 < sda5 sda6 > sda2 sda3 sda4
[    1.704278] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.847937] usb 3-1.4: New USB device found, idVendor=1bcf, idProduct=2b80
[    1.847947] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.847953] usb 3-1.4: Product: Laptop_Integrated_Webcam_HD
[    1.847958] usb 3-1.4: Manufacturer: CKFA156H51306000CD50
[    2.019772] usb 3-1.1: USB disconnect, device number 3
[    2.548048] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    2.548051] EXT4-fs (sda3): write access will be enabled during recovery
[    8.298093] EXT4-fs (sda3): recovery complete
[    8.306095] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   23.157778] Adding 2046972k swap on /dev/sda6.  Priority:-1 extents:1 across:2046972k 
[   23.240939] udevd[434]: starting version 175
[   23.437980] lp: driver loaded but no devices found
[   23.503843] ACPI: Requesting acpi_cpufreq
[   23.557812] ACPI: Battery Slot [BAT0] (battery present)
[   23.557940] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   23.557945] ACPI: Power Button [PWRB]
[   23.558009] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[   23.558013] ACPI: Sleep Button [SLPB]
[   23.558081] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   23.558826] ACPI: Lid Switch [LID0]
[   23.558910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   23.558915] ACPI: Power Button [PWRF]
[   23.655632] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   23.694614] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   23.754480] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[   23.757828] ACPI: AC Adapter [ADP0] (off-line)
[   23.758307] wmi: Mapper loaded
[   23.758765] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[   23.859763] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
[   23.861184] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
[   23.863142] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   23.979272] Linux media interface: v0.10
[   23.995558] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   24.030706] Linux video capture interface: v2.00
[   24.083383] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf:2b80)
[   24.100750] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input5
[   24.100896] usbcore: registered new interface driver uvcvideo
[   24.100898] USB Video Class driver (1.1.1)
[   24.123672] mei 0000:00:16.0: setting latency timer to 64
[   24.123847] mei 0000:00:16.0: irq 48 for MSI/MSI-X
[   24.134025] input: Dell WMI hotkeys as /devices/virtual/input/input6
[   24.144569] mei 0000:00:16.0: wd: failed to find the client
[   24.177591] cfg80211: Calling CRDA to update world regulatory domain
[    1.302083] ACPI: Invalid Power Resource to register!
[   24.179678] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[   24.179687] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.179702] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIN 1 (20120711/utaddress-251)
[   24.179706] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 2 (20120711/utaddress-251)
[   24.179711] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20120711/utaddress-251)
[   24.179715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.179717] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.183242] cfg80211: World regulatory domain updated:
[   24.183245] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.183248] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.183250] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.183252] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.183253] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.183255] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.255209] [drm] Initialized drm 1.1.0 20060810
[   24.279559] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   24.279562] Copyright(c) 2003-2012 Intel Corporation
[   24.279729] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[   24.279733] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900055e0000
[   24.279735] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
[   24.280211] iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
[   24.282432] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[   24.396562] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   24.396564] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[   24.396581] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   24.396583] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   24.396584] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   24.396586] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   24.396587] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[   24.396589] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   24.396690] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   24.403345] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[   24.413938] iwlwifi 0000:02:00.0: device EEPROM VER=0x71a, CALIB=0x6
[   24.413943] iwlwifi 0000:02:00.0: Device SKU: 0x150
[   24.413946] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   24.414455] Registered led device: phy0-led
[   24.445654] init: failsafe main process (755) killed by TERM signal
[   24.562645] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   24.589504] pci 0000:00:00.0: Intel Sandybridge Chipset
[   24.589571] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   24.590300] pci 0000:00:00.0: detected 65536K stolen memory
[   24.590352] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   24.590353] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   24.590390] Console: switching to colour dummy device 80x25
[   24.590469] i915 0000:00:02.0: setting latency timer to 64
[   24.606252] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[   24.606263] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   24.606265] [drm] Driver supports precise vblank timestamp query.
[   24.606467] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   24.606469] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   24.775865] init: alsa-restore main process (823) terminated with status 19
[   24.820050] ppdev: user-space parallel port driver
[   24.895864] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[   24.913398] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[   25.051971] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   25.097659] fbcon: inteldrmfb (fb0) is primary device
[   25.296359] Bluetooth: Core ver 2.16
[   25.296383] NET: Registered protocol family 31
[   25.296385] Bluetooth: HCI device and connection manager initialized
[   25.296387] Bluetooth: HCI socket layer initialized
[   25.296388] Bluetooth: L2CAP socket layer initialized
[   25.296392] Bluetooth: SCO socket layer initialized
[   25.345258] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.345259] Bluetooth: BNEP filters: protocol multicast
[   25.440997] Console: switching to colour frame buffer device 200x56
[   25.487523] Bluetooth: RFCOMM TTY layer initialized
[   25.487525] Bluetooth: RFCOMM socket layer initialized
[   25.487526] Bluetooth: RFCOMM ver 1.11
[   25.525886] fb0: inteldrmfb frame buffer device
[   25.525887] drm: registered panic notifier
[   25.526052] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   25.529228] acpi device:27: registered as cooling_device4
[   25.529241] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   25.529299] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input9
[   25.530496] acpi device:2a: registered as cooling_device5
[   25.530781] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   25.532099] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   25.532188] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   25.616358] r8169 0000:04:00.0: eth1: link down
[   25.616377] r8169 0000:04:00.0: eth1: link down
[   25.616398] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   25.787249] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[   25.976975] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   25.977135] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   26.050000] init: plymouth main process (258) killed by USR2 signal
[   26.820691] init: anacron main process (857) killed by TERM signal
[   27.136873] init: plymouth-stop pre-start process (1320) terminated with status 1
[   27.225066] r8169 0000:04:00.0: eth1: link up
[   27.225091] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   27.284074] NET: Registered protocol family 17
[   27.318736] fuse init (API version 7.20)
[  215.749182] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[  215.749194] ata2.00: irq_stat 0x00400000, PHY RDY changed
[  215.749204] ata2: SError: { PHYRdyChg CommWake }
[  215.749217] sr 1:0:0:0: CDB: 
[  215.749222] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[  215.749261] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[  215.749261]          res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[  215.749271] ata2.00: status: { DRDY }
[  215.749292] ata2: hard resetting link
[  216.470715] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  216.476871] ata2.00: configured for UDMA/133
[  216.487722] ata2: EH complete
[  792.513836] usb 4-1.3: new high-speed USB device number 3 using ehci_hcd
[  792.614106] usb 4-1.3: New USB device found, idVendor=1f4d, idProduct=c803
[  792.614116] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  792.614122] usb 4-1.3: Product: RTL2838UHIDIR
[  792.614127] usb 4-1.3: Manufacturer: Realtek
[  792.614132] usb 4-1.3: SerialNumber: 00000001
chemik@chemik-Vostro-260s:~$

[ilin]

Znów nie wsadziłeś loga w tagi code.

Nie wiem czy do tej karty firmware nie musi być.

Wszystko jednak wskazuje ,że ta karta z buta zacznie działać od kernela 3.7

Kod: Zaznacz cały

filename:       /lib/modules/3.7.0-rc2/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-rtl28xxu.ko
license:        GPL
author:         Thomas Mair <thomas.mair86@googlemail.com>
author:         Antti Palosaari <crope@iki.fi>
description:    Realtek RTL28xxU DVB USB driver
alias:          usb:v0CCDp00D3d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0413p6680d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1D19p1101d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1F4DpC803d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp00B3d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v1F4DpB803d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0CCDp00A9d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp2838d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp2832d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v14AAp0161d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v14AAp0160d*dc*dsc*dp*ic*isc*ip*in*
alias:          usb:v0BDAp2831d*dc*dsc*dp*ic*isc*ip*in*
depends:        dvb_usb_v2,rtl2830,rc-core
intree:         Y
vermagic:       3.7.0-rc2 SMP mod_unload 
parm:           adapter_nr:DVB adapter numbers (array of short)

Kod: Zaznacz cały

alias:          usb:v1F4DpC803d*dc*dsc*dp*ic*isc*ip*in*

Dokładne ID tej karty.

W 3.6 było

Kod: Zaznacz cały

alias:          usb:v1F4DpB803d*dc*dsc*dp*ic*isc*ip*in*

[Chemical Attack]

Czyli jak rozumiem muszę czekać na kernel 3.7?? Albo stery do 3.6?
Dziękuję za pomoc w każdym razie!
W innym temacie pytałem o pad do XBOX.. może w tym mi pomożecie??