[SOLVED] Po instalacji Ubuntu obok Windows 7, brak menu GRUB-a, domyślnie startuje Windows.

[Dracoborg]

Hej:D Mam problem. Kupiem nowego lapka. Poniewaz na uczelni nie zawsze moge wykorzytywac wolne oprogramowanie, potrzebuje miec rowniez windowsa. Zrobilem wg zalecen najpierw zainstalowalem windowsa tworzac dwie partycje 150GB i 100GB. Odpalilem live Ubuntu wybralem zainstaluj obok windows 7, uatomatycznie wukonalo sie partycjonowanie pozostalej 500GB przestrzeni dyskowej i zainstalowalo mi ubuntu. Problem polega na tym ze po uruchomieniu nadal wlacza sie windows 7, a nie grub. Any idea??

[igotit4free]

W trakcie instalacji Ubuntu GRUBa (bootloader) trzeba zainstalować na /dev/sda ... nigdzie indziej.
Możesz zrobić ponowną instalację systemu (szybko i prosto), możesz doinstalować samego GRUBa (trochę się poduczysz).

Możesz też napisać jaki to laptop, jaki ma BIOS i konfigurację, ale jak nie chcesz to możesz to zachować w sekrecie.
No już szczytem dbałości było by wykonać na twoim komputerze uruchomionym w trybie Live taki skrypt http://bootinfoscript.sourceforge.net/ i podać tu jego wynik wklejony w tagach Code.
Zmień temat na treściwy, bo ten jest mylący, poszukaj na forum tematów typu "po instalacji ubuntu uruchamia się windows", będziesz zaskoczony wynikami.

[Dracoborg]

Hej. Dzieki za zmiane tematu:) Mam troche obowiazkow na uczelni i ciezko bylo mi znalezc czas na rozwiazanie mojego problemu. Szczerze mowiac mialem to zrobic jutro na spokojnie, aczkolwiek zawsze jest jakies jutro...
Jesli chodzi o ponowna instalacja systemu to watpie, by to pomoglo. Zwlaszcza ze zrobilem to przed napisaniem tematu:) Najpierw sam utworzylem partycjonowanie wg wlasnych upodoban i myslalem ze zrobilem cos zle i dlatego nie mam gruba. Uruchomilem wiec ubuntu w trybie live. Uruchomilem narzedzie do dyskow, sformatowalem partycje z ubuntu, usunelem wszystkie partycje linuksa, a nastepnie uruchomilem instalator tym razem wybierajac opcje z automatycznym partycjonowaniem zdajac sie na doswiadczenie madrzejszych odemnie. Efekt niestety jest ten sam.

Laptop to ASUS X75VB
BIOS Vendor: American Megatrends
Version: 304
Przyznam sie ze konfiguracja jest standardowa, nic nie zmienialem:)

Efekt wykonania skryptu

Kod: Zaznacz cały

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        /grub/grub.cfg

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda9: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb4: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1516192 of /dev/sdb4 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       The integrity check of the ADV area failed. No errors 
                       found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /efi/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048       206,847       204,800   7 NTFS / exFAT / HPFS
/dev/sda2             206,848   307,202,047   306,995,200   7 NTFS / exFAT / HPFS
/dev/sda3         307,202,048   512,002,047   204,800,000   7 NTFS / exFAT / HPFS
/dev/sda4         512,004,094 1,465,147,391   953,143,298   5 Extended
/dev/sda5         512,004,096   520,005,631     8,001,536  83 Linux
/dev/sda6         520,007,680   715,317,247   195,309,568  83 Linux
/dev/sda7         715,319,296   910,628,863   195,309,568  83 Linux
/dev/sda8         910,630,912 1,448,607,743   537,976,832  83 Linux
/dev/sda9       1,448,609,792 1,465,147,391    16,537,600  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 3926 MB, 3926949888 bytes
255 heads, 63 sectors/track, 477 cylinders, total 7669824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb4                 256     7,669,823     7,669,568   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        1AF68B79F68B53C3                       ntfs       Zastrzeżone przez system
/dev/sda2        F60C9A270C99E343                       ntfs       
/dev/sda3        AC5A47CB5A4790CE                       ntfs       
/dev/sda5        3ad0d683-962d-41c8-ab89-87591dfca1db   ext4       
/dev/sda6        9245c518-05d8-4d82-a09a-24731cef2452   ext4       New Volume
/dev/sda7        f1a38a07-8365-4c5f-8f25-a8d9817c930e   ext4       New Volume
/dev/sda8        7a425086-105a-4b69-9909-227b0ae69468   ext4       
/dev/sda9        2d30d956-b0c5-44d4-ad55-18d33fe6a0b8   swap       
/dev/sdb4        2EF0-A050                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb4        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


============================= sda5/grub/grub.cfg: ==============================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 19f8a1bd-2d59-4b07-9d7b-578386904828
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos5)'
  search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
  set locale_dir=($root)/grub/locale
  set lang=pl_PL
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	linux	/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=19f8a1bd-2d59-4b07-9d7b-578386904828 ro   quiet splash $vt_handoff
	initrd	/initrd.img-3.11.0-18-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	echo	'Wczytywanie systemu Linux 3.11.0-18-generic...'
	linux	/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=19f8a1bd-2d59-4b07-9d7b-578386904828 ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/initrd.img-3.11.0-18-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	linux	/vmlinuz-3.11.0-15-generic root=UUID=19f8a1bd-2d59-4b07-9d7b-578386904828 ro   quiet splash $vt_handoff
	initrd	/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	echo	'Wczytywanie systemu Linux 3.11.0-15-generic...'
	linux	/vmlinuz-3.11.0-15-generic root=UUID=19f8a1bd-2d59-4b07-9d7b-578386904828 ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/initrd.img-3.11.0-15-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	linux16	/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root 3ad0d683-962d-41c8-ab89-87591dfca1db
	linux16	/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 1AF68B79F68B53C3
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                grub/grub.cfg                                  1
               =                initrd.img-3.11.0-15-generic                   2
               =                initrd.img-3.11.0-18-generic                   1
               =                vmlinuz-3.11.0-15-generic                      1
               =                vmlinuz-3.11.0-18-generic                      1
               =                vmlinuz-3.11.0-18-generic.efi.signed           1

=========================== sda8/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos8)'
  search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
  set locale_dir=($root)/boot/grub/locale
  set lang=pl_PL
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	linux	/boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=7a425086-105a-4b69-9909-227b0ae69468 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-18-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	echo	'Wczytywanie systemu Linux 3.11.0-18-generic...'
	linux	/boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=7a425086-105a-4b69-9909-227b0ae69468 ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/boot/initrd.img-3.11.0-18-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	linux	/boot/vmlinuz-3.11.0-15-generic root=UUID=7a425086-105a-4b69-9909-227b0ae69468 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	echo	'Wczytywanie systemu Linux 3.11.0-15-generic...'
	linux	/boot/vmlinuz-3.11.0-15-generic root=UUID=7a425086-105a-4b69-9909-227b0ae69468 ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/boot/initrd.img-3.11.0-15-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos8)'
	search --no-floppy --fs-uuid --set=root 7a425086-105a-4b69-9909-227b0ae69468
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 1AF68B79F68B53C3
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda8/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda8 during installation
UUID=7a425086-105a-4b69-9909-227b0ae69468 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda9 during installation
UUID=2d30d956-b0c5-44d4-ad55-18d33fe6a0b8 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda8: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                boot/grub/grub.cfg                             1
               =                boot/initrd.img-3.11.0-15-generic              1
               =                boot/initrd.img-3.11.0-18-generic              3
               =                boot/vmlinuz-3.11.0-15-generic                 2
               =                boot/vmlinuz-3.11.0-18-generic                 1
               =                boot/vmlinuz-3.11.0-18-generic.efi.signed      1
               =                initrd.img                                     1
               =                vmlinuz                                        2

=========================== sdb4/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb4/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb4: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb4: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb4: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/ubuntu/Downloads/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

Domyslam sie z niego ze grub jest zainsalowany w zlym miejscu:) Z tego tez powodu automatycznie odpala sie bootloader windowsa i ma gdzies gruba:) Juz biore sie za jego poprawna instalacja;)

Aktualizacja:

Poszperalem troche na forum i skorzystalem z rady aby usunac ubuntu nastepnie wybrac wlasne partycjonowanie i utworzyc partycje montowane / , /home oraz partycje swap. Wykonalem to polecenie. Wyglada na to ze jedyna zmiana to usuniecie partycji boot, ale grub zamiast sie zainstalowac w miejscu bootloadera windowsa, nie zainstalowal sie wcale. Wybaczcie jesli sie myle, ale staram sie sam cos poanalizowac:)

Zaktualizowany skrypt

Kod: Zaznacz cały

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb4: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1516192 of /dev/sdb4 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       The integrity check of the ADV area failed. No errors 
                       found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /efi/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048       206,847       204,800   7 NTFS / exFAT / HPFS
/dev/sda2             206,848   307,202,047   306,995,200   7 NTFS / exFAT / HPFS
/dev/sda3         307,202,048   512,002,047   204,800,000   7 NTFS / exFAT / HPFS
/dev/sda4         512,004,094   895,811,583   383,807,490   5 Extended
/dev/sda5         512,004,096   683,898,879   171,894,784  83 Linux
/dev/sda6         683,900,928   879,210,495   195,309,568  83 Linux
/dev/sda7         879,212,544   895,811,583    16,599,040  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 3926 MB, 3926949888 bytes
255 heads, 63 sectors/track, 477 cylinders, total 7669824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb4                 256     7,669,823     7,669,568   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        1AF68B79F68B53C3                       ntfs       Zastrzeżone przez system
/dev/sda2        F60C9A270C99E343                       ntfs       
/dev/sda3        AC5A47CB5A4790CE                       ntfs       
/dev/sda5        d0006aef-7b64-422a-8802-b9316472e03a   ext4       
/dev/sda6        01dcfa0c-4e39-475c-a52d-ee54e247bbf5   ext4       
/dev/sda7        20c49b64-e28e-4707-8263-49a6cd488e6d   swap       
/dev/sdb4        2EF0-A050                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb4        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd0,msdos5)'
  search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
  set locale_dir=($root)/boot/grub/locale
  set lang=pl_PL
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	linux	/boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=d0006aef-7b64-422a-8802-b9316472e03a ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-18-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-18-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	echo	'Wczytywanie systemu Linux 3.11.0-18-generic...'
	linux	/boot/vmlinuz-3.11.0-18-generic.efi.signed root=UUID=d0006aef-7b64-422a-8802-b9316472e03a ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/boot/initrd.img-3.11.0-18-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, za pomocą systemu Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	linux	/boot/vmlinuz-3.11.0-15-generic root=UUID=d0006aef-7b64-422a-8802-b9316472e03a ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	echo	'Wczytywanie systemu Linux 3.11.0-15-generic...'
	linux	/boot/vmlinuz-3.11.0-15-generic root=UUID=d0006aef-7b64-422a-8802-b9316472e03a ro recovery nomodeset 
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd	/boot/initrd.img-3.11.0-15-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos5)'
	search --no-floppy --fs-uuid --set=root d0006aef-7b64-422a-8802-b9316472e03a
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
	insmod part_msdos
	insmod ntfs
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set=root 1AF68B79F68B53C3
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
UUID=d0006aef-7b64-422a-8802-b9316472e03a /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda6 during installation
UUID=01dcfa0c-4e39-475c-a52d-ee54e247bbf5 /home           ext4    defaults        0       2
# swap was on /dev/sda7 during installation
UUID=20c49b64-e28e-4707-8263-49a6cd488e6d none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda5: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                boot/grub/grub.cfg                             1
               =                boot/initrd.img-3.11.0-15-generic              1
               =                boot/initrd.img-3.11.0-18-generic              1
               =                boot/vmlinuz-3.11.0-15-generic                 1
               =                boot/vmlinuz-3.11.0-18-generic                 1
               =                boot/vmlinuz-3.11.0-18-generic.efi.signed      2
               =                initrd.img                                     1
               =                vmlinuz                                        1

=========================== sdb4/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb4/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb4: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             boot/grub/grub.cfg                             1

================= sdb4: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

            ?? = ??             ldlinux.sys                                    1
            ?? = ??             syslinux/chain.c32                             1
            ?? = ??             syslinux/gfxboot.c32                           1
            ?? = ??             syslinux/syslinux.cfg                          1
            ?? = ??             syslinux/vesamenu.c32                          1

============== sdb4: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/ubuntu/Downloads/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

[adek69]

Kod: Zaznacz cały

Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb

wg mnie dalej gruba masz na sdb zamiast na sda

zwróć uwagę podczas instalacji na czym instalujesz plik rozruchowy, jest taka opcja podczas partycjonowania, że możesz wybrać miejsce...

[namok]

Kod: Zaznacz cały

Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb

wg mnie dalej gruba masz na sdb zamiast na sda...

To grub teraz nazywa się syslinux?

@Dracoborg skoro zainstalowałeś ponownie to jeszcze raz nie zaszkodzi, ale teraz zwróć uwagę gdzie i czy instalujesz gruba(program rozruchowy wg. przewodnika)

PS:
Oczywiście da się zainstalować gruba bez ponownej instalacji systemu.

[Dracoborg]

@Dracoborg skoro zainstalowałeś ponownie to jeszcze raz nie zaszkodzi, ale teraz zwróć uwagę gdzie i czy instalujesz gruba(program rozruchowy wg. przewodnika)

Sprawdzilem. Bootloader grub instaluje sie dokladnie w tym miejscu co podane w przewodniuku czyli /dev/sda. Niestety nie dziala. Chyba konieczna jest reczna instalacja. Zastanawiam sie czy nie moznaby gruba zainstalowac w miejscu bootloadera windowsa czyli w dev/sda1??

[mistrz1]

Instalujesz z pendrive?

[namok]

Zainstaluj grub'a z livecd

[perzan]

Spróbuj poszukać w ustawieniach Win czegoś takiego jak "Fast Startup" i to wyłączyć. Może to bruździ. Bo w BIOSie te wszystkie "Secure Boot" masz wyłączone?

[Dracoborg]

Instalujesz z pendrive?

Tak z pendrive utworzony za pomoca programu Lili, zawsze tak robie.

Szybka aktualizacja:
Zainstalowalem gruba2 recznie instalujac gruba a potem wykonujac polecenie update-grub2 nadal brak efektow. Moze warto dodac gruba do bootloadera windy?

-- 19 mar 2014, o 10:36 --

Spróbuj poszukać w ustawieniach Win czegoś takiego jak "Fast Startup" i to wyłączyć. Może to bruździ. Bo w BIOSie te wszystkie "Secure Boot" masz wyłączone?

W biosie wszystko wygląda w porządku. Jeśli chodzi o ustawienia windowsa widzę tylko, że jest ustawiony jako domyślny system. Nie da się tego zmienić ze względu na to, że nie wykrywa innych systemów i jest to jedyna pozycja do wyboru. Opcji typu "fast boot" czy "fast startup" nie widze.

[mistrz1]

A co się dzieje, jeśli uruchamiasz system z podpiętym pendrive?

[Dracoborg]

A co się dzieje, jeśli uruchamiasz system z podpiętym pendrive?

Banalna rzecz:D najpierw bootuje się pendrive i pyta czy chce testować Ubuntu czy zainstalować:) A jak dam exit to uruchamia się winda, czyli normalnie bootowanie z dysku;/

Edit
Przeglądam tematy i widzę, że problem ten często pojawia się u użytkowników posiadają dwa dyski HDD i kombinują by na jednym mieć windę na drugim linuks;) Jak ktoś patrzył na skrypt to pewnie wie, że ja mam tylko jeden dysk:)

[mistrz1]

A pokaż jeszcze:

Kod: Zaznacz cały

sudo fdisk -l

[Dracoborg]

A pokaż jeszcze:

Kod: Zaznacz cały

sudo fdisk -l

Prosze bardzo:

Kod: Zaznacz cały

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xb05cd80c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      206847      102400    7  HPFS/NTFS/exFAT
/dev/sda2          206848   307202047   153497600    7  HPFS/NTFS/exFAT
/dev/sda3       307202048   512002047   102400000    7  HPFS/NTFS/exFAT
/dev/sda4       512004094   895811583   191903745    5  Extended
Partition 4 does not start on physical sector boundary.
/dev/sda5       512004096   683898879    85947392   83  Linux
/dev/sda6       683900928   879210495    97654784   83  Linux
/dev/sda7       879212544   895811583     8299520   82  Linux swap / Solaris

Disk /dev/sdb: 3926 MB, 3926949888 bytes
255 heads, 63 sectors/track, 477 cylinders, total 7669824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcad4ebea

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           0           0           0    0  Empty
/dev/sdb4             256     7669823     3834784    b  W95 FAT32

I mam jeszcze komunikat:

Kod: Zaznacz cały

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

[mistrz1]

Kod: Zaznacz cały

Urządzenie Rozruch   Początek      Koniec   Bloków   ID  System
/dev/sda1              63   203752394   101876166    7  HPFS/NTFS/exFAT
/dev/sda2   *   203752395   233376254    14811930   83  Linux
/dev/sda3       233385984   234440703      527360   82  Linux swap / Solaris

Nie wiem, czy to ma znaczenie, bo u mnie rozruch zaznaczony jest na Linuksie, a u ciebie na Windowsie.

[Dracoborg]

Nie wiem, czy to ma znaczenie, bo u mnie rozruch zaznaczony jest na Linuksie, a u ciebie na Windowsie.

No to jestesmy na tej samej stronie:) Ja tez tego nie wiem:)

[adek69]

Opcji typu "fast boot" czy "fast startup" nie widze.

tych opcji szukaj w panelu sterowania windowsa a nie w biosie,
jak jest włączona to windows się hibernuje i nie pozwala na montowanie dysków pod linuxem

[namok]

Szybka aktualizacja:
Zainstalowalem gruba2 recznie instalujac gruba a potem wykonujac polecenie update-grub2 nadal brak efektow. Moze warto dodac gruba do bootloadera windy

Jak to zrobiłeś? Dokładnie opisz.
Instalowałeś z poziomu livecd jak podałem w linku?

[perzan]

Nie wiem, czy to ma znaczenie, bo u mnie rozruch zaznaczony jest na Linuksie, a u ciebie na Windowsie.

Ja też mam ustawioną flagę rozruchową (za fdisk) na partycję windowsową, tak jak Autor wątku, a GRUB i Linux ładują się bez problemu. Chyba nie do końca tędy droga.

[Dracoborg]

tych opcji szukaj w panelu sterowania windowsa a nie w biosie,

Oczywiscie ze w windowsie, wybacz zastosowalem skrot myslowy;D Aczkolwiek z tego co wiem fast boot jest z automatu w windows 8. Jesli zas chodzi o 7 to szybkie googlowanie dalo wyniki odnosnie mozliwosci doinstalowania sobie tego mechanizmu - nic na temat automatycznego fast boota.

Jak to zrobiłeś? Dokładnie opisz.
Instalowałeś z poziomu livecd jak podałem w linku?

Tak w trybie live z pamięci flash.
Calkiem podobnie tylko z http://www.ubuntu-pomoc.org/przywracani ... -z-livecd/

-- 19 mar 2014, o 14:35 --

Wykonałem wszystko wg twojego poradnika. podczas instalacji miałem kilkadziesiąt razy komunikat "device node not found" a potem "Installation finished. No error reported". Efektów brak.