[SOLVED] instalacja karty wifi pcmcia TP-Link WN310G ATHEROS

[TOMcki]

Witam!
nie moge sobie poradzic z instalacja karty wifi pcmcia TP-Link WN310G.
Generalnie sprawa wyglada nastepujaco:

• System-> Administracja -> Hawrdware Drivers - tutaj zaznaczylem cos takiego jak Atheros HardwareAccess Layer (HAL). Jest zaznaczona opcja 'in use'.
• jesli chodzi o sterowniki madwifi to kolega ktory sie troszke lepiej zna ode mnie mowi ze cos tam zainstalowal - nie wiem dokladnie.

Jesli chodzi o wbudowana karte wifi (chipset broadcom) to wszystko dziala jak nalezy. Potrzebuje jednak czegos z mocniejsza antena, a taka wlasnie ma karta ktora usiluje zainstalowac.

Po wklepaniu komeny lsmod wyskakuje mi cos takiego

Kod: Zaznacz cały

tomcki@tomcki-laptop:~$ lsmod
Module                  Size  Used by
nls_iso8859_1           4992  1 
nls_cp437               6656  1 
udf                    88612  1 
ipv6                  267780  8 
af_packet              23812  6 
rfcomm                 41744  2 
l2cap                  25728  13 rfcomm
bluetooth              61156  4 rfcomm,l2cap
rfkill_input            5760  0 
ppdev                  10372  0 
cpufreq_conservative     8712  0 
cpufreq_stats           7104  0 
cpufreq_userspace       5284  0 
cpufreq_ondemand        9740  0 
freq_table              5536  2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave       2688  0 
sbs                    15112  0 
container               5632  0 
sbshc                   7680  1 sbs
dock                   11280  0 
iptable_filter          3840  0 
ip_tables              14820  1 iptable_filter
x_tables               16132  1 ip_tables
vfat                   14464  1 
fat                    54556  1 vfat
aes_i586               33536  0 
dm_crypt               15364  0 
dm_mod                 62660  1 dm_crypt
lp                     12324  0 
ath_pci               101024  0 
wlan                  207728  1 ath_pci
joydev                 13120  0 
ath_hal               192592  1 ath_pci
pcmcia                 40876  0 
arc4                    2944  2 
ecb                     4480  2 
blkcipher               8324  1 ecb
b43                   144548  0 
rfkill                  8596  3 rfkill_input,b43
stk11xx               104324  0 
mac80211              165652  1 b43
videodev               29440  1 stk11xx
v4l2_common            18304  1 videodev
v4l1_compat            15492  1 videodev
cfg80211               15112  1 mac80211
input_polldev           5896  1 b43
evdev                  13056  8 
serio_raw               7940  0 
sdhci                  19076  0 
psmouse                40336  0 
mmc_core               51460  1 sdhci
yenta_socket           27276  2 
rsrc_nonstatic         13696  1 yenta_socket
pcmcia_core            40596  3 pcmcia,yenta_socket,rsrc_nonstatic
fglrx                1555468  26 
snd_hda_intel         344856  1 
snd_pcm_oss            42144  0 
snd_mixer_oss          17920  2 snd_pcm_oss
snd_pcm                78596  2 snd_hda_intel,snd_pcm_oss
snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
snd_hwdep              10500  1 snd_hda_intel
snd_seq_dummy           4868  0 
video                  19856  0 
output                  4736  1 video
battery                14212  0 
ac                      6916  0 
snd_seq_oss            35584  0 
asus_laptop            19064  0 
snd_seq_midi            9376  0 
led_class               6020  2 b43,asus_laptop
snd_rawmidi            25760  1 snd_seq_midi
button                  9232  0 
snd_seq_midi_event      8320  2 snd_seq_oss,snd_seq_midi
snd_seq                54224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              24836  2 snd_pcm,snd_seq
snd_seq_device          9612  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_piix4               9612  0 
parport_pc             36260  1 
parport                37832  3 ppdev,lp,parport_pc
ati_agp                 9996  0 
snd                    56996  11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core               24832  1 i2c_piix4
agpgart                34760  2 fglrx,ati_agp
shpchp                 34452  0 
pci_hotplug            30880  1 shpchp
irtty_sir               9728  0 
soundcore               8800  2 snd
sir_dev                17412  1 irtty_sir
irda                  203068  2 irtty_sir,sir_dev
pcspkr                  4224  0 
crc_ccitt               3072  1 irda
ext3                  136840  1 
jbd                    48404  1 ext3
mbcache                 9600  1 ext3
usbhid                 32128  0 
hid                    38784  1 usbhid
sg                     36880  0 
sr_mod                 17956  1 
cdrom                  37408  1 sr_mod
sd_mod                 30720  5 
atiixp                  5648  0 [permanent]
ide_core              113996  1 atiixp
pata_atiixp             8960  5 
ata_generic             8324  0 
8139too                27520  0 
ssb                    34308  1 b43
pata_acpi               8320  0 
8139cp                 24704  0 
mii                     6400  2 8139too,8139cp
libata                159344  3 pata_atiixp,ata_generic,pata_acpi
ehci_hcd               37900  0 
ohci_hcd               26640  0 
scsi_mod              151436  4 sg,sr_mod,sd_mod,libata
usbcore               146412  5 stk11xx,usbhid,ehci_hcd,ohci_hcd
thermal                16796  0 
processor              37384  2 thermal
fan                     5636  0 
fbcon                  42912  0 
tileblit                3456  1 fbcon
font                    9472  1 fbcon
bitblit                 6784  1 fbcon
softcursor              3072  1 bitblit
fuse                   50708  5 

po wklepaniu: iwconfig

Kod: Zaznacz cały

tomcki@tomcki-laptop:~$ iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11g  ESSID:"Siec Domowa"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:04:ED:67:A7:CA   
          Bit Rate=24 Mb/s   Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2346 B   
          Link Quality=70/100  Signal level=-41 dBm  Noise level=-73 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

[broken]

Co Ci wyswietla dmesg ? Bo z tego co widze to po prostu madiwifi nie chce utowrzyc interfejsu - byc moze z powodu zle wybranej domeny pracy.

[TOMcki]

Wynik polecenia dmesg

Kod: Zaznacz cały

[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c6e00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227537
[    0.000000] Kernel command line: root=UUID=f98069f9-9936-4243-9fc3-bb4bfb46d467 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1600.214 MHz processor.
[   31.020357] Console: colour VGA+ 80x25
[   31.020363] console [tty0] enabled
[   31.021419] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   31.022193] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   31.046511] Memory: 896900k/917312k available (2177k kernel code, 19836k reserved, 1006k data, 368k init, 0k highmem)
[   31.046520] virtual kernel memory layout:
[   31.046521]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   31.046522]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   31.046524]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   31.046525]     lowmem  : 0xc0000000 - 0xf7fd0000   ( 895 MB)
[   31.046526]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   31.046528]       .data : 0xc0320514 - 0xc041bdc4   (1006 kB)
[   31.046529]       .text : 0xc0100000 - 0xc0320514   (2177 kB)
[   31.046533] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   31.046574] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   31.126485] Calibrating delay using timer specific routine.. 3204.00 BogoMIPS (lpj=6408008)
[   31.126513] Security Framework initialized
[   31.126522] SELinux:  Disabled at boot.
[   31.126538] AppArmor: AppArmor initialized
[   31.126542] Failure registering capabilities with primary security module.
[   31.126551] Mount-cache hash table entries: 512
[   31.126686] Initializing cgroup subsys ns
[   31.126692] Initializing cgroup subsys cpuacct
[   31.126704] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 00000000
[   31.126713] monitor/mwait feature present.
[   31.126715] using mwait in idle threads.
[   31.126720] CPU: L1 I cache: 32K, L1 D cache: 32K
[   31.126722] CPU: L2 cache: 1024K
[   31.126726] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042940 0000c109 00000000 00000000 00000000
[   31.126737] Compat vDSO mapped to ffffe000.
[   31.126751] Checking 'hlt' instruction... OK.
[   31.142918] SMP alternatives: switching to UP code
[   31.144871] Freeing SMP alternatives: 11k freed
[   31.144993] Early unpacking initramfs... done
[   31.543758] ACPI: Core revision 20070126
[   31.543845] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   31.580655] CPU0: Intel(R) Celeron(R) M CPU        420  @ 1.60GHz stepping 08
[   31.580676] Total of 1 processors activated (3204.00 BogoMIPS).
[   31.580855] ENABLING IO-APIC IRQs
[   31.581053] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   31.725669] Brought up 1 CPUs
[   31.725694] CPU0 attaching sched-domain:
[   31.725697]  domain 0: span 01
[   31.725699]   groups: 01
[   31.725888] net_namespace: 64 bytes
[   31.725901] Booting paravirtualized kernel on bare hardware
[   31.726402] Time:  0:08:17  Date: 09/15/08
[   31.726432] NET: Registered protocol family 16
[   31.726649] EISA bus registered
[   31.726676] ACPI: bus type pci registered
[   31.726988] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[   31.726990] PCI: Using configuration type 1
[   31.727011] Setting up standard PCI resources
[   31.730886] ACPI: EC: Look up EC in DSDT
[   31.747768] ACPI: Interpreter enabled
[   31.747771] ACPI: (supports S0 S1 S3 S4 S5)
[   31.747791] ACPI: Using IOAPIC for interrupt routing
[   31.756347] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[   31.756351] ACPI: EC: driver started in poll mode
[   31.756483] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   31.757983] PCI: Transparent bridge - 0000:00:14.4
[   31.758082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   31.758228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   31.758374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   31.766177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.766345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.766513] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.766683] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.766848] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.767012] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[   31.767174] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.767339] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[   31.767482] Linux Plug and Play Support v0.97 (c) Adam Belay
[   31.767518] pnp: PnP ACPI init
[   31.767526] ACPI: bus type pnp registered
[   31.771058] pnp: PnP ACPI: found 14 devices
[   31.771060] ACPI: ACPI bus type pnp unregistered
[   31.771065] PnPBIOS: Disabled by ACPI PNP
[   31.771319] PCI: Using ACPI for IRQ routing
[   31.771322] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   31.771332] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[   31.789570] NET: Registered protocol family 8
[   31.789572] NET: Registered protocol family 20
[   31.789650] AppArmor: AppArmor Filesystem Enabled
[   31.793521] Time: tsc clocksource has been installed.
[   31.801551] system 00:07: ioport range 0xa00-0xa0f has been reserved
[   31.801557] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   31.801560] system 00:08: ioport range 0x40b-0x40b has been reserved
[   31.801563] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[   31.801566] system 00:08: ioport range 0xc00-0xc01 has been reserved
[   31.801569] system 00:08: ioport range 0xc14-0xc14 has been reserved
[   31.801572] system 00:08: ioport range 0xc50-0xc51 has been reserved
[   31.801578] system 00:08: ioport range 0xc52-0xc52 has been reserved
[   31.801581] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[   31.801584] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[   31.801587] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[   31.801590] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[   31.801593] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[   31.801596] system 00:08: ioport range 0x800-0x89f has been reserved
[   31.801599] system 00:08: ioport range 0x480-0x4bf has been reserved
[   31.801602] system 00:08: ioport range 0x900-0x90f has been reserved
[   31.801605] system 00:08: ioport range 0x910-0x91f has been reserved
[   31.801608] system 00:08: ioport range 0x8200-0x821f has been reserved
[   31.801611] system 00:08: ioport range 0x4000-0x4004 has been reserved
[   31.801614] system 00:08: ioport range 0x4005-0x40ff has been reserved
[   31.801618] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[   31.801625] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[   31.801628] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   31.801634] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[   31.801640] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   31.801643] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[   31.801646] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   31.801650] system 00:0d: iomem range 0x100000-0x37ffffff could not be reserved
[   31.801653] system 00:0d: iomem range 0x0-0x0 could not be reserved
[   31.832084] PCI: Bridge: 0000:00:01.0
[   31.832087]   IO window: 9000-9fff
[   31.832091]   MEM window: fe100000-fe1fffff
[   31.832094]   PREFETCH window: bdf00000-ddefffff
[   31.832107] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[   31.832109]   IO window: 0000a000-0000a0ff
[   31.832115]   IO window: 0000a400-0000a4ff
[   31.832122]   PREFETCH window: 44000000-47ffffff
[   31.832128]   MEM window: 48000000-4bffffff
[   31.832134] PCI: Bridge: 0000:00:14.4
[   31.832138]   IO window: a000-bfff
[   31.832145]   MEM window: fe200000-feafffff
[   31.832151]   PREFETCH window: ddf00000-dfefffff
[   31.832201] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.832219] NET: Registered protocol family 2
[   31.869494] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   31.869831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   31.871359] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   31.872422] TCP: Hash tables configured (established 131072 bind 65536)
[   31.872427] TCP reno registered
[   31.881630] checking if image is initramfs... it is
[   32.332737] Switched to high resolution mode on CPU 0
[   32.676956] Freeing initrd memory: 7729k freed
[   32.677215] Simple Boot Flag at 0xff set to 0x1
[   32.677816] audit: initializing netlink socket (disabled)
[   32.677835] audit(1221437298.492:1): initialized
[   32.680105] VFS: Disk quotas dquot_6.5.1
[   32.680214] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   32.680379] io scheduler noop registered
[   32.680382] io scheduler anticipatory registered
[   32.680384] io scheduler deadline registered
[   32.680396] io scheduler cfq registered (default)
[   32.728150] Boot video device is 0000:01:05.0
[   32.728468] isapnp: Scanning for PnP cards...
[   33.082799] isapnp: No Plug & Play device found
[   33.113541] Real Time Clock Driver v1.12ac
[   33.113679] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   33.113946] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   33.115210] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   33.115300] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   33.115410] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   33.117741] i8042.c: Detected active multiplexing controller, rev 1.1.
[   33.118910] serio: i8042 KBD port at 0x60,0x64 irq 1
[   33.118915] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   33.118918] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   33.118920] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   33.118923] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   33.119776] mice: PS/2 mouse device common for all mice
[   33.119903] EISA: Probing bus 0 at eisa.0
[   33.119928] Cannot allocate resource for EISA slot 4
[   33.119949] EISA: Detected 0 cards.
[   33.119954] cpuidle: using governor ladder
[   33.119956] cpuidle: using governor menu
[   33.120071] NET: Registered protocol family 1
[   33.120103] Using IPI No-Shortcut mode
[   33.120141] registered taskstats version 1
[   33.120258]   Magic number: 8:206:102
[   33.120433] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   33.120435] EDD information not available.
[   33.120829] Freeing unused kernel memory: 368k freed
[   33.159505] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   34.348751] fuse init (API version 7.9)
[   34.373176] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   34.373183] ACPI: Processor [CPU1] (supports 8 throttling states)
[   34.373199] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[   34.374461] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   34.378104] ACPI: Thermal Zone [THRM] (55 C)
[   35.121312] usbcore: registered new interface driver usbfs
[   35.121339] usbcore: registered new interface driver hub
[   35.141610] usbcore: registered new device driver usb
[   35.182115] SCSI subsystem initialized
[   35.193337] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   35.193393] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[   35.193414] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   35.193739] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   35.193764] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebff000
[   35.252575] usb usb1: configuration #1 chosen from 1 choice
[   35.252604] hub 1-0:1.0: USB hub found
[   35.252617] hub 1-0:1.0: 4 ports detected
[   35.263997] libata version 3.00 loaded.
[   35.288376] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   35.356379] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[   35.356403] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   35.356433] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   35.356452] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfe000
[   35.416320] usb usb2: configuration #1 chosen from 1 choice
[   35.416349] hub 2-0:1.0: USB hub found
[   35.416361] hub 2-0:1.0: 4 ports detected
[   35.520268] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ

[TOMcki]

a oto 2-ga czesc wynikow (nie zmiescilo sie na raz)

[ 35.356379] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[ 35.356403] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 35.356433] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 35.356452] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfe000
[ 35.416320] usb usb2: configuration #1 chosen from 1 choice
[ 35.416349] hub 2-0:1.0: USB hub found
[ 35.416361] hub 2-0:1.0: 4 ports detected
[ 35.520268] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[ 35.520290] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 35.520320] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 35.520377] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfebfd000
[ 35.659814] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 35.671796] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.671941] usb usb3: configuration #1 chosen from 1 choice
[ 35.671969] hub 3-0:1.0: USB hub found
[ 35.671976] hub 3-0:1.0: 8 ports detected
[ 35.775891] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 35.775898] 8139cp 0000:02:00.0: Try the "8139too" driver instead.
[ 35.779482] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.779539] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 35.779555] ACPI: PCI interrupt for device 0000:00:14.1 disabled
[ 35.779787] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 35.780363] 8139too Fast Ethernet driver 0.9.28
[ 35.799636] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 35.799653] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 35.799665] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 35.799675] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 35.839577] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 35.839731] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 35.840986] eth0: RealTek RTL8139 at 0xb800, 00:18:f3:e9:12:6d, IRQ 19
[ 35.840989] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 35.845637] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.846373] scsi0 : pata_atiixp
[ 35.846987] scsi1 : pata_atiixp
[ 35.848260] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 35.848264] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 36.012111] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[ 36.012116] ata1.00: 156301488 sectors, multi 16: LBA48
[ 36.028038] ata1.00: configured for UDMA/100
[ 36.347425] ata2.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
[ 36.347442] ata2.01: simplex DMA is claimed by other device, disabling DMA
[ 36.406674] usb 3-5: new high speed USB device using ehci_hcd and address 3
[ 36.519333] ata2.01: configured for PIO4
[ 36.519482] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5
[ 36.521682] scsi 1:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.21 PQ: 0 ANSI: 5
[ 36.529981] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 36.529987] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 36.540779] Driver 'sd' needs updating - please use bus_type methods
[ 36.540886] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.540901] sd 0:0:0:0: [sda] Write Protect is off
[ 36.540904] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.540923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.540976] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.540987] sd 0:0:0:0: [sda] Write Protect is off
[ 36.540989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.541006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.541011] sda:<6>usb 3-5: configuration #1 chosen from 1 choice
[ 36.545861] Driver 'sr' needs updating - please use bus_type methods
[ 36.566708] sda1 sda2 < sda5 sda6 sda7 >
[ 36.615467] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.621766] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 36.621773] Uniform CD-ROM driver Revision: 3.20
[ 36.621827] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 36.622367] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.622386] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 36.846025] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 37.052787] usb 1-2: configuration #1 chosen from 1 choice
[ 37.076113] usbcore: registered new interface driver hiddev
[ 37.079909] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2
[ 37.091233] Attempting manual resume
[ 37.091238] swsusp: Resume From Partition 8:6
[ 37.091240] PM: Checking swsusp image.
[ 37.091453] PM: Resume from disk failed.
[ 37.093758] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2
[ 37.093780] usbcore: registered new interface driver usbhid
[ 37.093784] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 37.140177] kjournald starting. Commit interval 5 seconds
[ 37.140194] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.061054] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 51.204823] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 51.332487] irda_init()
[ 51.332514] NET: Registered protocol family 23
[ 51.405802] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 51.742444] Linux agpgart interface v0.102
[ 51.815873] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 52.183862] input: Power Button (FF) as /devices/virtual/input/input4
[ 52.195178] ACPI: Power Button (FF) [PWRF]
[ 52.195308] input: Lid Switch as /devices/virtual/input/input5
[ 52.198363] ACPI: Lid Switch [LID]
[ 52.198476] input: Power Button (CM) as /devices/virtual/input/input6
[ 52.207238] ACPI: Power Button (CM) [PWRB]
[ 52.207339] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 52.223137] ACPI: Sleep Button (CM) [SLPB]
[ 52.291813] asus-laptop: Asus Laptop Support version 0.42
[ 52.292044] asus-laptop: BSTS called, 0x7f returned
[ 52.292098] asus-laptop: A6Rp model detected
[ 52.304849] Registered led device: asus:mail
[ 53.121944] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 53.451863] [fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
[ 53.451908] [fglrx] ASYNCIO init succeed!
[ 53.452218] [fglrx] PAT is enabled successfully!
[ 53.452914] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 53.625165] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1397]
[ 53.753813] Yenta: ISA IRQ mask 0x0eb8, PCI irq 16
[ 53.753819] Socket status: 30000820
[ 53.753822] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 53.753830] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 53.753833] cs: IO port probe 0xa000-0xbfff: clean.
[ 53.754394] pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[ 53.754397] pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[ 53.942385] sdhci: Secure Digital Host Controller Interface driver
[ 53.942390] sdhci: Copyright(c) Pierre Ossman
[ 53.942450] sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 17)
[ 53.942484] ACPI: PCI Interrupt 0000:02:01.1[C] -> GSI 18 (level, low) -> IRQ 20
[ 53.942514] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 53.942573] mmc0: SDHCI at 0xfeaff800 irq 20 DMA
[ 54.536122] ACPI: AC Adapter [AC0] (on-line)
[ 54.539705] pccard: CardBus card inserted into slot 0
[ 54.642971] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 54.691542] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 54.706097] parport_pc 00:06: reported by Plug and Play ACPI
[ 54.706137] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 54.817583] ACPI: Battery Slot [BAT0] (battery present)
[ 54.866405] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input9
[ 54.875206] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 55.027084] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 55.895523] b43-phy0: Broadcom 4318 WLAN found
[ 55.937615] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 55.937630] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[ 55.973927] phy0: Selected rate control algorithm 'simple'
[ 56.178743] Linux video capture interface: v2.00
[ 56.254100] stk11xx: Syntek USB2.0 webcam driver startup
[ 56.254142] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[ 56.254145] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0xA311.
[ 56.254148] stk11xx: Release: 0005
[ 56.254150] stk11xx: Number of interfaces : 1
[ 56.255780] stk11xx: Initialize USB2.0 Syntek Camera
[ 56.476286] stk11xx: Syntek USB2.0 Camera is ready
[ 56.476341] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 56.476371] usbcore: registered new interface driver usb_stk11xx_driver
[ 56.476375] stk11xx: v1.3.1 : Syntek USB Video Camera
[ 57.730964] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 57.922672] wlan: 0.9.4
[ 58.074938] cs: IO port probe 0x100-0x3af: clean.
[ 58.077419] cs: IO port probe 0x3e0-0x4ff: clean.
[ 58.078208] cs: IO port probe 0x820-0x8ff: clean.
[ 58.078622] cs: IO port probe 0xc00-0xcf7: clean.
[ 58.079520] cs: IO port probe 0xa00-0xaff: clean.
[ 58.155848] ath_pci: 0.9.4
[ 58.155931] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 58.155941] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 58.156007] wifi%d: unable to attach hardware: 'No hardware present or device not yet supported' (HAL status 1)
[ 58.156029] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 58.817186] lp0: using parport0 (interrupt-driven).
[ 58.880157] Adding 995988k swap on /dev/sda6. Priority:-1 extents:1 across:995988k
[ 59.635540] EXT3 FS on sda7, internal journal
[ 59.784062] device-mapper: uevent: version 1.0.3
[ 59.784095] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 61.539579] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 61.980845] No dock devices found.
[ 63.497632] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 63.497640] apm: overridden by ACPI.
[ 63.805796] ppdev: user-space parallel port driver
[ 64.033112] audit(1221430130.337:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5224 profile="/usr/sbin/cupsd" namespace="default"
[ 70.885494] input: b43-phy0 as /devices/virtual/input/input10
[ 71.108441] Bluetooth: Core ver 2.11
[ 71.108853] NET: Registered protocol family 31
[ 71.108857] Bluetooth: HCI device and connection manager initialized
[ 71.108862] Bluetooth: HCI socket layer initialized
[ 71.168025] Bluetooth: L2CAP ver 2.9
[ 71.168031] Bluetooth: L2CAP socket layer initialized
[ 71.203999] Bluetooth: RFCOMM socket layer initialized
[ 71.204017] Bluetooth: RFCOMM TTY layer initialized
[ 71.204019] Bluetooth: RFCOMM ver 1.8
[ 71.345264] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 72.491137] b43-phy0 debug: Chip initialized
[ 72.492047] b43-phy0 debug: 32-bit DMA initialized
[ 72.517054] Registered led device: b43-phy0:tx
[ 72.517309] Registered led device: b43-phy0:rx
[ 72.517451] Registered led device: b43-phy0:assoc
[ 72.517593] Registered led device: b43-phy0:radio
[ 72.517638] b43-phy0 debug: Wireless interface started
[ 72.564917] b43-phy0 debug: Adding Interface type 2
[ 72.589805] eth0: link down
[ 73.411655] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 73.675753] NET: Registered protocol family 17
[ 75.141782] [fglrx] GART Table is not in FRAME_BUFFER range
[ 75.141796] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 75.141799] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000
[ 75.307492] [fglrx] interrupt source 10000000 successfully enabled
[ 75.307500] [fglrx] enable ID = 0x00000004
[ 75.307857] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 83.413443] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 102.036462] NET: Registered protocol family 10
[ 102.036989] lo: Disabled Privacy Extensions
[ 102.037645] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 102.038272] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 113.209140] wlan0: Initial auth_alg=0
[ 113.209149] wlan0: authenticate with AP 00:04:ed:67:a7:ca
[ 113.210554] wlan0: RX authentication from 00:04:ed:67:a7:ca (alg=0 transaction=2 status=0)
[ 113.210559] wlan0: authenticated
[ 113.210562] wlan0: associate with AP 00:04:ed:67:a7:ca
[ 113.212736] wlan0: RX AssocResp from 00:04:ed:67:a7:ca (capab=0x411 status=0 aid=2)
[ 113.212740] wlan0: associated
[ 113.214211] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 113.482960] UDF-fs: Partition marked readonly; forcing readonly mount
[ 115.529456] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Programy', timestamp 2007/10/17 15:11 (1078)
[ 129.638956] wlan0: no IPv6 routers present
tomcki@tomcki-laptop:~$

[kastyk]

Oto istotna linia z wyniku dmesg:

[ 58.156007] wifi%d: unable to attach hardware: 'No hardware present or device not yet supported' (HAL status 1)

Wyłącz kartę Broadcoma w BIOSie, jeśli możesz, następnie użyj mego HowTo i zainstaluj zaktualizowany sterownik do karty na Atherosie. Jeśli zadziała, patrz mój podpis

[broken]

Musisz sciagnac i skompilowac sterowniki MADWIFI-NG i po problemie.

[TOMcki]

Zrobilem wszystko wg how to, ktore podeslal kastyk i wszystko smiga
Wielkie dzieki za pomoc wszystkim, ktorzy przyczynili sie do rozwiazania problemu

[Cyryllo]

Próbuję wg tego How-To lecz przy wydaniu komendy make wywala mi

Kod: Zaznacz cały

Makefile.inc:66: *** /lib/modules/2.6.24-22-generic/build is missing, please set KERNELPATH.  Stop.

Powiem że Hardware Drivers Manager widzi mi te sterowniki i niby są uruchomione lecz nie uruchamia mi przy starcie karty.
iwconfig pokazuje:

Kod: Zaznacz cały

lo        no wireless extensions.

irda0     no wireless extensions.

eth1      no wireless extensions.

a ifconfig:

Kod: Zaznacz cały

eth1      Link encap:Ethernet  HWaddr 00:50:04:fe:00:cd
          inet addr:192.168.2.105  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::250:4ff:fefe:cd/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1104 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1135 errors:0 dropped:0 overruns:0 carrier:56
          collisions:0 txqueuelen:1000
          RX bytes:961927 (939.3 KB)  TX bytes:137683 (134.4 KB)
          Interrupt:4 Base address:0x300

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:112 (112.0 B)  TX bytes:112 (112.0 B)

Zainstalowałem najpierw czysty Ubuntu bez okienek a następnie zainstalowałem LXDE Jeśli ma ktoś jakieś pomysły to czekam na nie