Na monitorze 17 cali ubuntu wykrywa 15 cali

[dzijal]

Witam, ubuntu wyświetla mi sie na monitorze w takjaby oknie tzn z kazdej strony jest jakies 0,5 cm czarnego tła, zmiana rozdzielczości nic niepomaga. Jak to mogę naprawić?

[Adlatus]

Wyregulować monitor (poszukaj guziczków na obudowie).

[dzijal]

próbowałem już ale jak przesunę w jedną stronę to z drugiej pozostaje ponad centymeter czarnego tła, a poza tym cały ekran na windowsie mi się przesuwa. więc tak myśle może to być wina sterowników ale jakie i skąd?

[luk1don]

Podajesz zbyt mało informacji, jaka karta graf., sterowniki, monitor, wklej xorga...

[dzijal]

teraz jestem na lekcjach wkleje jak bede miał trochę czasu
a karta graficzna to radek 9550 monitor samsung 17 cali

[Adlatus]

próbowałem już ale jak przesunę w jedną stronę to z drugiej pozostaje ponad centymeter czarnego tła

Regulacja monitora polega również na rozciągnięciu obrazu w pionie i w poziomie.

Ze sterownikami na razie kombinuj.

[dzijal]

jak tego Xorg mam wklejić gdy pisuje go do konsoli wyskakuje mi takie coś

Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.

[luk1don]

Kod: Zaznacz cały

cat /etc/X11/xorg.conf

A sterowniki do graf. jakie masz?

[dzijal]

Tu wklejam wynik z xorg.conf

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection

a co do tych sterowników to może mi ktos powiedzieć jak sprawdzić?

[luk1don]

Widać po xorgu, że niby fglrx:)
Wklep jeszcze w konsoli i wklej wynik:

Kod: Zaznacz cały

fglrxinfo

Potem pomyślimy, co z tą rozdzielczością.

[dzijal]

Oto wyniki z fglrxinfo

display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon 9550 / X1050 Series
OpenGL version string: 2.1.7412 Release

co dalej?

[pusz]

Dawno nie uzywalem kart ati ale jak na moj gust to trochy ubogi ten twoj xorg.conf zwlaszcza sekcja Screen i Device i Monitor

U mnie przykladowo wygladaja te sekcje tak:


Section "Device"
Identifier "Device 0"
Driver "nvidia"
Option "IgnoreDisplayDevices" "TV"
Option "Coolbits" "1"
Option "RandRRotation" "true"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "false"
Option "DynamicTwinView" "true"
BoardName "nVidia Corporation Unknown device"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Monitor 0"
ModelName "Default Monitor"
HorizSync 28-96
VertRefresh 50-75
# 640x350 @ 85.00 Hz (GTF) hsync: 31.28 kHz; pclk: 25.02 MHz
Modeline "640x350" 25.02 640 656 720 800 350 351 354 368 -HSync +Vsync
# 640x400 @ 85.00 Hz (GTF) hsync: 35.78 kHz; pclk: 29.20 MHz
Modeline "640x400" 29.20 640 664 728 816 400 401 404 421 -HSync +Vsync
# 640x480 @ 60.00 Hz (GTF) hsync: 29.82 kHz; pclk: 23.86 MHz
Modeline "640x480" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync
# 640x480 @ 72.00 Hz (GTF) hsync: 36.07 kHz; pclk: 29.43 MHz
Modeline "640x480" 29.43 640 664 728 816 480 481 484 501 -HSync +Vsync
# 640x480 @ 75.00 Hz (GTF) hsync: 37.65 kHz; pclk: 30.72 MHz
Modeline "640x480" 30.72 640 664 728 816 480 481 484 502 -HSync +Vsync
# 640x480 @ 85.00 Hz (GTF) hsync: 42.92 kHz; pclk: 35.71 MHz
Modeline "640x480" 35.71 640 672 736 832 480 481 484 505 -HSync +Vsync
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 720x400 @ 85.00 Hz (GTF) hsync: 35.78 kHz; pclk: 32.64 MHz
Modeline "720x400" 32.64 720 744 816 912 400 401 404 421 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
Modeline "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
Modeline "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
Modeline "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
Modeline "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
Modeline "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 56.00 Hz (GTF) hsync: 34.72 kHz; pclk: 35.55 MHz
Modeline "800x600" 35.55 800 832 912 1024 600 601 604 620 -HSync +Vsync
# 800x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 38.22 MHz
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
# 800x600 @ 72.00 Hz (GTF) hsync: 45.07 kHz; pclk: 46.87 MHz
Modeline "800x600" 46.87 800 840 920 1040 600 601 604 626 -HSync +Vsync
# 800x600 @ 75.00 Hz (GTF) hsync: 47.03 kHz; pclk: 48.91 MHz
Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627 -HSync +Vsync
# 800x600 @ 85.00 Hz (GTF) hsync: 53.55 kHz; pclk: 56.55 MHz
Modeline "800x600" 56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
Modeline "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
# 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync
# 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz
Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync
# 1024x768 @ 75.00 Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHz
Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802 -HSync +Vsync
# 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
Modeline "1024x768" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
Modeline "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 75.00 Hz (GTF) hsync: 67.65 kHz; pclk: 104.99 MHz
Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
Modeline "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1152x900 @ 77.00 Hz (GTF) hsync: 72.46 kHz; pclk: 112.45 MHz
Modeline "1152x900" 112.45 1152 1224 1352 1552 900 901 904 941 -HSync +Vsync
# 1152x900 @ 66.00 Hz (GTF) hsync: 61.71 kHz; pclk: 94.79 MHz
Modeline "1152x900" 94.79 1152 1224 1344 1536 900 901 904 935 -HSync +Vsync
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
# 1280x960 @ 60.00 Hz (GTF) hsync: 59.64 kHz; pclk: 102.10 MHz
Modeline "1280x960" 102.10 1280 1360 1496 1712 960 961 964 994 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
Modeline "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
Modeline "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 85.00 Hz (GTF) hsync: 85.68 kHz; pclk: 149.43 MHz
Modeline "1280x960" 149.43 1280 1376 1512 1744 960 961 964 1008 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
Modeline "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
# 1280x1024 @ 67.00 Hz (GTF) hsync: 71.29 kHz; pclk: 123.19 MHz
Modeline "1280x1024" 123.19 1280 1368 1504 1728 1024 1025 1028 1064 -HSync +Vsync
# 1280x1024 @ 75.00 Hz (GTF) hsync: 80.17 kHz; pclk: 138.54 MHz
Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync
# 1280x1024 @ 76.00 Hz (GTF) hsync: 81.32 kHz; pclk: 141.82 MHz
Modeline "1280x1024" 141.82 1280 1376 1512 1744 1024 1025 1028 1070 -HSync +Vsync
# 1280x1024 @ 85.00 Hz (GTF) hsync: 91.38 kHz; pclk: 159.36 MHz
Modeline "1280x1024" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
Modeline "1368x768" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
Modeline "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
Modeline "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
Modeline "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.75 kHz; pclk: 179.26 MHz
Modeline "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
Modeline "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
# 1600x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 160.96 MHz
Modeline "1600x1200" 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -HSync +Vsync
# 1600x1200 @ 65.00 Hz (GTF) hsync: 80.99 kHz; pclk: 176.23 MHz
Modeline "1600x1200" 176.23 1600 1712 1888 2176 1200 1201 1204 1246 -HSync +Vsync
# 1600x1200 @ 70.00 Hz (GTF) hsync: 87.43 kHz; pclk: 190.25 MHz
Modeline "1600x1200" 190.25 1600 1712 1888 2176 1200 1201 1204 1249 -HSync +Vsync
# 1600x1200 @ 75.00 Hz (GTF) hsync: 93.97 kHz; pclk: 205.99 MHz
Modeline "1600x1200" 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -HSync +Vsync
# 1600x1200 @ 85.00 Hz (GTF) hsync: 107.10 kHz; pclk: 234.76 MHz
Modeline "1600x1200" 234.76 1600 1720 1896 2192 1200 1201 1204 1260 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
Modeline "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
# 1792x1344 @ 60.00 Hz (GTF) hsync: 83.46 kHz; pclk: 202.97 MHz
Modeline "1792x1344" 202.97 1792 1920 2112 2432 1344 1345 1348 1391 -HSync +Vsync
# 1792x1344 @ 75.00 Hz (GTF) hsync: 105.23 kHz; pclk: 259.27 MHz
Modeline "1792x1344" 259.27 1792 1928 2128 2464 1344 1345 1348 1403 -HSync +Vsync
# 1856x1392 @ 60.00 Hz (GTF) hsync: 86.46 kHz; pclk: 218.57 MHz
Modeline "1856x1392" 218.57 1856 1992 2192 2528 1392 1393 1396 1441 -HSync +Vsync
# 1856x1392 @ 75.00 Hz (GTF) hsync: 108.97 kHz; pclk: 277.23 MHz
Modeline "1856x1392" 277.23 1856 2000 2200 2544 1392 1393 1396 1453 -HSync +Vsync
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +Vsync
# 1920x1440 @ 60.00 Hz (GTF) hsync: 89.40 kHz; pclk: 234.59 MHz
Modeline "1920x1440" 234.59 1920 2064 2272 2624 1440 1441 1444 1490 -HSync +Vsync
# 1920x1440 @ 75.00 Hz (GTF) hsync: 112.73 kHz; pclk: 297.59 MHz
Modeline "1920x1440" 297.59 1920 2072 2280 2640 1440 1441 1444 1503 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Screen 0"
Monitor "Monitor 0"
DefaultColorDepth 24
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Sprobuj wygenerowac xorg.conf za pomoca sudo X -configure potem przenies powstaly plik do /etc/x11 i zmien mu nazwe na xorg.conf

[luk1don]

Pusz ma rację:) Wpisów od monitora coś mało. Sterowniki pewnie masz własnościowe - możesz się pobawić w reinstalację. Teraz może zrób kopię xorga i wklep jeszcze:

Kod: Zaznacz cały

sudo aticonfig --initial -f 

lub

Kod: Zaznacz cały

sudo aticonfig --input=/etc/X11/xorg.conf --tls=1

albo jeszcze:

Kod: Zaznacz cały

sudo aticonfig --overlay-type=Xv

(wcześniej możesz przywrócić pierwotną konfigurację xorga przez: sudo dexconf) i po tym wklej xorga.
Podaj dokładnie nazwę i typ monitora i jakie zakresy obsługuje może znajdziesz, to się może ręcznie dopisze.

[dzijal]

Po wpisaniu ty komend mam takiego xorg'a

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "UseFastTLS" "1"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

a model monitora to Samsung syncMaster 795 DF

[luk1don]

A monitor jak? Zobacz może w regulacji monitora, czy nie ma takiej opcji jak zoom, itp. Więcej pomysłów nie mam:)
Spróbuj ewentualnie pozmieniać jeszcze xorga mniej więcej tak:

Kod: Zaznacz cały

Section "Monitor"
    Identifier    "Samsung SyncMaster 795DF/795MB"
    Option        "DPMS"
    HorizSync      30.0-85.0
    VertRefresh    50.0-160.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor       "Samsung SyncMaster 795DF/795MB"
    DefaultDepth   24
    SubSection    "Display"
    Modes         "1280x1024" "1152x864" "1024x768" "800x600" "640x480" 

[dzijal]

Section "Monitor"
Identifier "Samsung SyncMaster 795DF/795MB"
Option "DPMS"
HorizSync 30.0-85.0
VertRefresh 50.0-160.0
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Samsung SyncMaster 795DF/795MB"
DefaultDepth 24
SubSection "Display"
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"

Po wpisaniu tego do xorg.conf po reboot'cie systemu wszystko mi sie zacinało (tak jak w windowsie bez sterowników) i czarne paski były nadal. Wpisałem w konsoli dexorg, zrestartowałem komputer i już bez zacinania ale nadal z paskami. Ma może ktoś jeszcze jakiś inny pomysł?