System "nie widzi" pendrive i dysku zewnętrznego po podłaczeniu do portu USB

[Max74]

Witam. Ostatnio zaktualizowałem system z Xubuntu 10.10 do 11.04. PC przestał mi "widzieć" nośniki wymienne (pendrive, HDD), podłączane do portu USB. Wcześniej było wszytko ok. Ten problem mam tylko na PC. Na lapku wszystko działa bez zarzutu. PC jest dość stary, ma PG Gigabyte na ATA i procka Intel Pentium IV 2,53 GHz. Do tej pory udało mi się tylko sprawić, żeby pendrak był widoczny w katalogu media, ale tam jest pod rootem i można go tylko przeglądać i ewentualnie zrzucić z niego coś na kompa (i to też nie zawsze - nie widzi wszystkiego na penie). Po podłączeniu do usb pendrive się nie wczytuje, nie widać go na pulpicie i w katalogu domowym. fdisk pokazuje go jako sdc1. Po wydaniu komendy lsusb jest już trochę gorzej:/ Na ogół widzi wszystko, poza pendrive (myszka, klawiatura, drukarka - jeśli jest podłączona)
Proszę o pomoc...

[fri.K]

Zawsze warto wkleić wynik

Kod: Zaznacz cały

lsusb

no i

Kod: Zaznacz cały

dmesg

[Max74]

Oto wyniki dwóch poleceń:
lsusb:

Kod: Zaznacz cały

Bus 004 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID [code]

1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0781:540e SanDisk Corp. Cruzer Contour Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[/code]

i dmesg:

Kod: Zaznacz cały

[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f4d40] f4d40
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 36780000 - 373b8000
[    0.000000] ACPI: RSDP 000f6910 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 3fff3000 0002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 3fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 3fff30c0 03890 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 3fff0000 00040
[    0.000000] ACPI: APIC 3fff6980 00068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map f5f80200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34530 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u2097152
[    0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-9-generic root=UUID=2da3c14a-4cb7-422a-8e77-66b6e4c45396 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5242240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1011940k/1048512k available (5189k kernel code, 36120k reserved, 2539k data, 700k init, 139208k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc15116e1 - 0xc178c4c0   (2539 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15116e1   (5189 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2545.550 MHz processor.
[    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5091.10 BogoMIPS (lpj=10182200)
[    0.008014] pid_max: default: 32768 minimum: 301
[    0.008051] Security Framework initialized
[    0.008088] AppArmor: AppArmor initialized
[    0.008092] Yama: becoming mindful.
[    0.008183] Mount-cache hash table entries: 512
[    0.008430] Initializing cgroup subsys ns
[    0.008438] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.008444] Initializing cgroup subsys cpuacct
[    0.008452] Initializing cgroup subsys memory
[    0.008467] Initializing cgroup subsys devices
[    0.008472] Initializing cgroup subsys freezer
[    0.008475] Initializing cgroup subsys net_cls
[    0.008479] Initializing cgroup subsys blkio
[    0.008541] CPU0: Hyper-Threading is disabled
[    0.008546] mce: CPU supports 4 MCE banks
[    0.008562] CPU0: Thermal monitoring enabled (TM1)
[    0.009388] SMP alternatives: switching to UP code
[    0.022851] ACPI: Core revision 20110112
[    0.026705] ftrace: allocating 23641 entries in 47 pages
[    0.028125] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028743] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069101] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
[    0.072003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              40
[    0.072003] ... generic registers:      18
[    0.072003] ... value mask:             000000ffffffffff
[    0.072003] ... max period:             0000007fffffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             000000000003ffff
[    0.072003] Brought up 1 CPUs
[    0.072003] Total of 1 processors activated (5091.10 BogoMIPS).
[    0.072003] devtmpfs: initialized
[    0.072003] print_constraints: dummy: 
[    0.072003] Time: 23:03:46  Date: 05/12/11
[    0.072003] NET: Registered protocol family 16
[    0.072003] EISA bus registered
[    0.072003] ACPI: bus type pci registered
[    0.097041] PCI: PCI BIOS revision 2.10 entry at 0xfa4c0, last bus=2
[    0.097045] PCI: Using configuration type 1 for base access
[    0.098537] bio: create slab <bio-0> at 0
[    0.099474] ACPI: EC: Look up EC in DSDT
[    0.103399] ACPI: Interpreter enabled
[    0.103407] ACPI: (supports S0 S1 S4 S5)
[    0.103436] ACPI: Using IOAPIC for interrupt routing
[    0.108509] ACPI: No dock devices found.
[    0.108514] HEST: Table not found.
[    0.108520] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.108612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.108783] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.108788] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
[    0.108792] pci_root PNP0A03:00: host bridge window [io  0x40c0-0x4fff] (ignored)
[    0.108797] pci_root PNP0A03:00: host bridge window [io  0x5000-0xffff] (ignored)
[    0.108801] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.108805] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.108809] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.108831] pci 0000:00:00.0: [8086:2560] type 0 class 0x000600
[    0.108843] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.108911] pci 0000:00:01.0: [8086:2561] type 1 class 0x000604
[    0.108985] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[    0.109034] pci 0000:00:1d.0: reg 20: [io  0xb800-0xb81f]
[    0.109073] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[    0.109122] pci 0000:00:1d.1: reg 20: [io  0xb000-0xb01f]
[    0.109160] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[    0.109209] pci 0000:00:1d.2: reg 20: [io  0xb400-0xb41f]
[    0.109256] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[    0.109279] pci 0000:00:1d.7: reg 10: [mem 0xe2100000-0xe21003ff]
[    0.109359] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.109365] pci 0000:00:1d.7: PME# disabled
[    0.109383] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.109431] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[    0.109437] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[    0.109439] * this clock source is slow. If you are sure your timer does not have
[    0.109442] * this bug, please use "acpi_pm_good" to disable the workaround
[    0.109514] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[    0.109520] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
[    0.109539] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[    0.109555] pci 0000:00:1f.1: reg 10: [io  0xbc00-0xbc07]
[    0.109567] pci 0000:00:1f.1: reg 14: [io  0xc000-0xc003]
[    0.109579] pci 0000:00:1f.1: reg 18: [io  0xc400-0xc407]
[    0.109591] pci 0000:00:1f.1: reg 1c: [io  0xc800-0xc803]
[    0.109602] pci 0000:00:1f.1: reg 20: [io  0xcc00-0xcc0f]
[    0.109614] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.109647] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[    0.109695] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    0.109752] pci 0000:01:00.0: [10de:0321] type 0 class 0x000300
[    0.109770] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
[    0.109780] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff pref]
[    0.109813] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.109869] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.109875] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.109881] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.109887] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.109919] pci 0000:02:02.0: [1102:0007] type 0 class 0x000401
[    0.109938] pci 0000:02:02.0: reg 10: [io  0xa000-0xa01f]
[    0.110002] pci 0000:02:02.0: supports D1 D2
[    0.110022] pci 0000:02:02.1: [1102:7005] type 0 class 0x000980
[    0.110040] pci 0000:02:02.1: reg 10: [io  0xa400-0xa407]
[    0.110104] pci 0000:02:02.1: supports D1 D2
[    0.110137] pci 0000:02:03.0: [168c:0013] type 0 class 0x000200
[    0.110156] pci 0000:02:03.0: reg 10: [mem 0xe2000000-0xe200ffff]
[    0.110245] pci 0000:02:08.0: [8086:103a] type 0 class 0x000200
[    0.110264] pci 0000:02:08.0: reg 10: [mem 0xe2010000-0xe2010fff]
[    0.110275] pci 0000:02:08.0: reg 14: [io  0xa800-0xa83f]
[    0.110331] pci 0000:02:08.0: supports D1 D2
[    0.110334] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110340] pci 0000:02:08.0: PME# disabled
[    0.110377] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.110384] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.110390] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe20fffff]
[    0.110396] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.110401] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.110405] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.110419] pci_bus 0000:00: on NUMA node 0
[    0.110424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.110584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.125159] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.125242] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.125322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.125402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.125482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.125563] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.125644] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.125725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.125897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.125904] vgaarb: loaded
[    0.126235] SCSI subsystem initialized
[    0.126335] libata version 3.00 loaded.
[    0.126412] usbcore: registered new interface driver usbfs
[    0.126431] usbcore: registered new interface driver hub
[    0.126473] usbcore: registered new device driver usb
[    0.126643] wmi: Mapper loaded
[    0.126647] PCI: Using ACPI for IRQ routing
[    0.126653] PCI: pci_cache_line_size set to 64 bytes
[    0.126722] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.126727] reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
[    0.126872] NetLabel: Initializing
[    0.126876] NetLabel:  domain hash size = 128
[    0.126879] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.126895] NetLabel:  unlabeled traffic allowed by default
[    0.138075] AppArmor: AppArmor Filesystem Enabled
[    0.138135] pnp: PnP ACPI init
[    0.138166] ACPI: bus type pnp registered
[    0.138446] pnp 00:00: [mem 0x000d0000-0x000d7fff]
[    0.138450] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.138454] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.138457] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.138461] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
[    0.138464] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.138468] pnp 00:00: [mem 0x00100000-0x3ffeffff]
[    0.138471] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.138474] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.138478] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[    0.138481] pnp 00:00: [mem 0xfff00000-0xffffffff]
[    0.138484] pnp 00:00: [mem 0x000e0000-0x000effff]
[    0.138569] system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.138575] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.138580] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.138584] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.138588] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.138593] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.138597] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.138601] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.138606] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.138610] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.138614] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
[    0.138618] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
[    0.138624] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.138712] pnp 00:01: [bus 00-ff]
[    0.138716] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.138720] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.138723] pnp 00:01: [io  0x0d00-0x3fff window]
[    0.138727] pnp 00:01: [io  0x4000-0x40bf]
[    0.138730] pnp 00:01: [io  0x40c0-0x4fff window]
[    0.138733] pnp 00:01: [io  0x5000-0xffff window]
[    0.138737] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.138741] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.138745] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[    0.138809] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.139108] pnp 00:02: [io  0x0010-0x001f]
[    0.139112] pnp 00:02: [io  0x0022-0x003f]
[    0.139115] pnp 00:02: [io  0x0044-0x005f]
[    0.139118] pnp 00:02: [io  0x0062-0x0063]
[    0.139121] pnp 00:02: [io  0x0065-0x006f]
[    0.139128] pnp 00:02: [io  0x0074-0x007f]
[    0.139131] pnp 00:02: [io  0x0091-0x0093]
[    0.139134] pnp 00:02: [io  0x00a2-0x00bf]
[    0.139137] pnp 00:02: [io  0x00e0-0x00ef]
[    0.139140] pnp 00:02: [io  0x04d0-0x04d1]
[    0.139143] pnp 00:02: [io  0x0290-0x029f]
[    0.139146] pnp 00:02: [io  0x0800-0x0805]
[    0.139224] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.139229] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.139233] system 00:02: [io  0x0800-0x0805] has been reserved
[    0.139238] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.139258] pnp 00:03: [dma 4]
[    0.139262] pnp 00:03: [io  0x0000-0x000f]
[    0.139265] pnp 00:03: [io  0x0080-0x0090]
[    0.139268] pnp 00:03: [io  0x0094-0x009f]
[    0.139271] pnp 00:03: [io  0x00c0-0x00df]
[    0.139316] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.139336] pnp 00:04: [io  0x0070-0x0073]
[    0.139356] pnp 00:04: [irq 8]
[    0.139401] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.139417] pnp 00:05: [io  0x0061]
[    0.139467] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.139484] pnp 00:06: [io  0x00f0-0x00ff]
[    0.139491] pnp 00:06: [irq 13]
[    0.139539] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.139720] pnp 00:07: [io  0x03f0-0x03f5]
[    0.139724] pnp 00:07: [io  0x03f7]
[    0.139731] pnp 00:07: [irq 6]
[    0.139734] pnp 00:07: [dma 2]
[    0.139806] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.140076] pnp 00:08: [io  0x03f8-0x03ff]
[    0.140084] pnp 00:08: [irq 4]
[    0.140175] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.140442] pnp 00:09: [io  0x02f8-0x02ff]
[    0.140450] pnp 00:09: [irq 3]
[    0.140539] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.140895] pnp 00:0a: [io  0x0378-0x037f]
[    0.140902] pnp 00:0a: [irq 7]
[    0.140983] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.141153] pnp 00:0b: [io  0x0060]
[    0.141156] pnp 00:0b: [io  0x0064]
[    0.141225] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141470] pnp 00:0c: [io  0x0330-0x0331]
[    0.141477] pnp 00:0c: [irq 10]
[    0.141550] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.141767] pnp 00:0d: [io  0x0201]
[    0.141829] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.141840] pnp: PnP ACPI: found 14 devices
[    0.141843] ACPI: ACPI bus type pnp unregistered
[    0.141850] PnPBIOS: Disabled by ACPI PNP
[    0.179246] Switching to clocksource acpi_pm
[    0.179303] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[    0.179312] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[    0.179319] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
[    0.179324] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.179327] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.179334] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.179340] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.179349] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.179354] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.179361] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe20fffff]
[    0.179367] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.179389] pci 0000:00:1e.0: setting latency timer to 64
[    0.179395] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.179399] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.179403] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.179407] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[    0.179412] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.179416] pci_bus 0000:02: resource 1 [mem 0xe2000000-0xe20fffff]
[    0.179419] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.179423] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.179488] NET: Registered protocol family 2
[    0.179583] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.179995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.179995] Switched to NOHz mode on CPU #0
[    0.179995] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.179995] TCP: Hash tables configured (established 131072 bind 65536)
[    0.179995] TCP reno registered
[    0.179995] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.179995] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.179995] NET: Registered protocol family 1
[    0.179995] pci 0000:01:00.0: Boot video device
[    0.179995] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.179995] PCI: CLS 32 bytes, default 64
[    0.179995] cpufreq-nforce2: No nForce2 chipset.
[    0.179995] audit: initializing netlink socket (disabled)
[    0.179995] type=2000 audit(1305241425.176:1): initialized
[    0.190245] Trying to unpack rootfs image as initramfs...
[    0.204937] highmem bounce pool size: 64 pages
[    0.204948] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.216236] VFS: Disk quotas dquot_6.5.2
[    0.216380] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.217502] fuse init (API version 7.16)
[    0.217645] msgmni has been set to 1704
[    0.224658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.224709] io scheduler noop registered
[    0.224712] io scheduler deadline registered
[    0.224738] io scheduler cfq registered (default)
[    0.224953] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.224990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.225140] efifb: probing for efifb
[    0.225145] efifb: cannot reserve video memory at 0xa0000
[    0.225151] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 56k, total 64k
[    0.225155] efifb: mode is 640x350x1, linelength=80, pages=1
[    0.225158] efifb: scrolling: redraw
[    0.225161] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.225332] Console: switching to colour frame buffer device 80x43
[    0.225354] fb0: EFI VGA frame buffer device
[    0.225485] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.225495] ACPI: Power Button [PWRB]
[    0.225570] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.225579] ACPI: Sleep Button [SLPB]
[    0.225650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.225656] ACPI: Power Button [PWRF]
[    0.225860] ACPI: acpi_idle registered with cpuidle
[    0.227633] ERST: Table is not found!
[    0.227831] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.248206] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.248258] isapnp: Scanning for PnP cards...
[    0.336468] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.378171] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.464728] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.488732] Linux agpgart interface v0.103
[    0.488869] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[    0.500411] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.502315] brd: module loaded
[    0.503177] loop: module loaded
[    0.503353] i2c-core: driver [adp5520] using legacy suspend method
[    0.503357] i2c-core: driver [adp5520] using legacy resume method
[    0.503529] ata_piix 0000:00:1f.1: version 2.13
[    0.503568] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.503637] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.552474] scsi0 : ata_piix
[    0.552651] scsi1 : ata_piix
[    0.553556] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xcc00 irq 14
[    0.553561] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xcc08 irq 15
[    0.554206] Fixed MDIO Bus: probed
[    0.554274] PPP generic driver version 2.4.2
[    0.554383] tun: Universal TUN/TAP device driver, 1.6
[    0.554387] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.554540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.554591] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.554617] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.554622] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.554692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.558625] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.564382] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2100000
[    0.584173] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.584461] hub 1-0:1.0: USB hub found
[    0.584470] hub 1-0:1.0: 6 ports detected
[    0.584588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.584614] uhci_hcd: USB Universal Host Controller Interface driver
[    0.584711] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.584724] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.584730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.584807] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.584853] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[    0.585037] hub 2-0:1.0: USB hub found
[    0.585045] hub 2-0:1.0: 2 ports detected
[    0.585138] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.585152] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.585157] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.585217] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.585257] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[    0.585436] hub 3-0:1.0: USB hub found
[    0.585444] hub 3-0:1.0: 2 ports detected
[    0.585532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.585541] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.585545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.585601] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.585637] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    0.585827] hub 4-0:1.0: USB hub found
[    0.585834] hub 4-0:1.0: 2 ports detected
[    0.586017] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.593256] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.593278] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.593574] mousedev: PS/2 mouse device common for all mice
[    0.593821] rtc_cmos 00:04: RTC can wake from S4
[    0.593893] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.593920] rtc0: alarms up to one month, 242 bytes nvram
[    0.594076] device-mapper: uevent: version 1.0.3
[    0.594200] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.600301] device-mapper: multipath: version 1.2.0 loaded
[    0.600309] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.600514] EISA: Probing bus 0 at eisa.0
[    0.600536] Cannot allocate resource for EISA slot 4
[    0.600540] Cannot allocate resource for EISA slot 5
[    0.600554] EISA: Detected 0 cards.
[    0.600648] cpuidle: using governor ladder
[    0.600652] cpuidle: using governor menu
[    0.601022] TCP cubic registered
[    0.601212] NET: Registered protocol family 10
[    0.602029] NET: Registered protocol family 17
[    0.602070] Registering the dns_resolver key type
[    0.602135] Using IPI No-Shortcut mode
[    0.602320] PM: Hibernation image not present or could not be loaded.
[    0.602339] registered taskstats version 1
[    0.602549]   Magic number: 11:847:99
[    0.602666] rtc_cmos 00:04: setting system clock to 2011-05-12 23:03:46 UTC (1305241426)
[    0.602671] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.602674] EDD information not available.
[    0.800181] ata2.00: ATA-5: ST360021A, 3.19, max UDMA/100
[    0.800188] ata2.00: 117231408 sectors, multi 16: LBA 
[    0.864207] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22LP20, 2.00, max UDMA/66
[    0.880390] ata1.00: configured for UDMA/66
[    0.888098] ata2.01: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/100
[    0.888105] ata2.01: 78242976 sectors, multi 16: LBA48 
[    0.931853] isapnp: No Plug & Play device found
[    0.968682] ata2.00: configured for UDMA/100
[    0.969629] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22LP20 2.00 PQ: 0 ANSI: 5
[    0.972850] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.972858] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.973070] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.973196] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.976645] ata2.01: configured for UDMA/100
[    0.976837] scsi 1:0:0:0: Direct-Access     ATA      ST360021A        3.19 PQ: 0 ANSI: 5
[    0.977128] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.977293] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    0.977381] sd 1:0:0:0: [sda] Write Protect is off
[    0.977386] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.977424] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.994920] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
[    0.995224] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    1.011981] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    1.041060]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.041591] sd 1:0:1:0: [sdb] Write Protect is off
[    1.041596] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.041634] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.081482] Freeing initrd memory: 12512k freed
[    1.101971]  sdb: sdb1 < sdb5 sdb6 sdb7 >
[    1.102655] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.102788] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.102829] Freeing unused kernel memory: 700k freed
[    1.103749] Write protecting the kernel text: 5192k
[    1.103791] Write protecting the kernel read-only data: 2148k
[    1.104100] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    1.150458] <30>udev[66]: starting version 167
[    1.188074] Refined TSC clocksource calibration: 2545.567 MHz.
[    1.188082] Switching to clocksource tsc
[    1.493563] Floppy drive(s): fd0 is 1.44M
[    1.519845] FDC 0 is a post-1991 82077
[    1.543569] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.543574] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.543644] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.579383] e100 0000:02:08.0: PME# disabled
[    1.580147] e100 0000:02:08.0: eth0: addr 0xe2010000, irq 20, MAC addr 00:20:ed:6c:20:d1
[    1.708476] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
[    1.708782] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    1.743296] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input4
[    1.744450] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    1.744772] usbcore: registered new interface driver usbhid
[    1.744777] usbhid: USB HID core driver
[    2.195310] EXT3-fs (sdb6): recovery required on readonly filesystem
[    2.195317] EXT3-fs (sdb6): write access will be enabled during recovery
[    2.214300] EXT3-fs: barriers not enabled
[    4.033391] kjournald starting.  Commit interval 5 seconds
[    4.033441] EXT3-fs (sdb6): orphan cleanup on readonly fs
[    4.033451] ext3_orphan_cleanup: deleting unreferenced inode 114671
[    4.033498] ext3_orphan_cleanup: deleting unreferenced inode 114669
[    4.033509] EXT3-fs (sdb6): 2 orphan inodes deleted
[    4.033513] EXT3-fs (sdb6): recovery complete
[    4.060326] EXT3-fs (sdb6): mounted filesystem with ordered data mode
[   21.627947] Adding 1464316k swap on /dev/sdb5.  Priority:-1 extents:1 across:1464316k 
[   21.738369] <30>udev[279]: starting version 167
[   21.829816] lp: driver loaded but no devices found
[   22.152710] EXT3-fs (sdb6): using internal journal
[   22.501497] intel_rng: FWH not detected
[   22.544287] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.568463] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 890kHz
[   22.602648] parport_pc 00:0a: reported by Plug and Play ACPI
[   22.602694] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   22.727452] lp0: using parport0 (interrupt-driven).
[   22.745333] gameport gameport1: EMU10K1 is pci0000:02:02.1/gameport0, io 0xa400, speed 1125kHz
[   22.938826] type=1400 audit(1305234248.831:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
[   22.939703] type=1400 audit(1305234248.831:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
[   22.942587] type=1400 audit(1305234248.835:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
[   23.509508] cfg80211: Calling CRDA to update world regulatory domain
[   23.538159] EXT3-fs: barriers not enabled
[   23.538982] [drm] Initialized drm 1.1.0 20060810
[   23.555928] kjournald starting.  Commit interval 5 seconds
[   23.584263] EXT3-fs (sdb7): using internal journal
[   23.584272] EXT3-fs (sdb7): mounted filesystem with ordered data mode
[   23.732237] ppdev: user-space parallel port driver
[   23.879705] ath5k 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.879784] ath5k 0000:02:03.0: registered as 'phy0'
[   24.562354] ath: EEPROM regdomain: 0x30
[   24.562359] ath: EEPROM indicates we should expect a direct regpair map
[   24.562363] ath: Country alpha2 being used: AM
[   24.562366] ath: Regpair used: 0x30
[   24.568053] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.568060] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568064] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.568068] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568072] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.568076] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568080] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.568084] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568088] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.568092] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568096] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.568100] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568104] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.568108] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568112] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.568116] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568120] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.568124] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568128] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.568132] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568136] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.568140] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   24.568144] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   24.568148] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   24.568152] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   24.568409] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.568414] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568418] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.568423] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568426] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.568431] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568435] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.568439] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568443] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.568447] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568451] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.568455] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568459] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.568464] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568467] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.568472] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568475] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.568480] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568483] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.568488] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568492] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.568496] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568500] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.568504] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568508] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.568513] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.568516] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   24.568521] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.616201] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   24.617873] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[   24.649789] CA0106 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   24.649836] snd-ca0106: Model 1002 Rev 00000000 Serial 10021102
[   24.912435] Writing to ADC failed!
[   24.928903] cfg80211: Pending regulatory request, waiting for it to be processed...
[   25.730508] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   25.730515] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730519] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   25.730524] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730527] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   25.730532] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730536] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   25.730540] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730544] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   25.730548] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730552] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   25.730556] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730560] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   25.730564] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730568] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   25.730572] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730576] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   25.730580] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730584] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   25.730588] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730592] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   25.730596] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730600] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   25.730604] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730608] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   25.730612] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730616] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   25.730620] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   25.730627] cfg80211: World regulatory domain updated:
[   25.730629] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.730634] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.730638] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.730642] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.730647] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.730651] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.730676] cfg80211: Calling CRDA for country: AM
[   25.738990] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   25.738997] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739001] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   25.739006] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739009] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   25.739014] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739017] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   25.739022] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739025] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   25.739030] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739033] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   25.739038] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739041] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   25.739046] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739049] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   25.739054] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739057] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   25.739062] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739065] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   25.739070] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739073] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   25.739078] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739081] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   25.739086] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739089] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   25.739094] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   25.739097] cfg80211: Disabling freq 2484 MHz
[   25.739103] cfg80211: Regulatory domain changed to country: AM
[   25.739106] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.739110] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   25.739114] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   25.739118] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   27.057000] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   27.063353] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034100a2)
[   27.063362] checking generic (a0000 e000) vs hw (d8000000 8000000)
[   27.063365] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[   27.063445] Console: switching to colour dummy device 80x25
[   27.066379] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   27.103997] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   27.104184] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   27.104188] [drm] nouveau 0000:01:00.0: BMP version 5.39
[   27.104192] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.22
[   27.104196] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[   27.104201] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8
[   27.104206] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 000088b8
[   27.104209] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 03010312 00000000
[   27.104213] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000033
[   27.104338] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   27.104343] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEE7D
[   27.104379] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF081
[   27.104390] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF1C7
[   27.104428] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF34D
[   27.104434] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF36A
[   27.104441] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF387
[   27.134647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF50B
[   27.260915] [drm] nouveau 0000:01:00.0: Detected monitoring device: max6646
[   27.260923] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[   27.260936] [drm] nouveau 0000:01:00.0: c: memory 648MHz core 324MHz
[   27.261526] [TTM] Zone  kernel: Available graphics memory: 442972 kiB.
[   27.261530] [TTM] Zone highmem: Available graphics memory: 512576 kiB.
[   27.261533] [TTM] Initializing pool allocator.
[   27.261553] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
[   27.261833] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   27.261859] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   27.261891] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[   27.261916] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[   27.264147] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   27.264152] [drm] No driver support for vblank timestamp query.
[   27.266094] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   27.266120] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[   27.266133] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[   27.266139] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   27.316062] [drm] nouveau 0000:01:00.0: Load detected on output A
[   27.385087] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ef626600
[   27.398836] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   27.398843] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[   27.399137] Console: switching to colour frame buffer device 128x48
[   27.400262] fb0: nouveaufb frame buffer device
[   27.400265] drm: registered panic notifier
[   27.400277] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   27.819124] type=1400 audit(1305234253.711:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=778 comm="apparmor_parser"
[   27.829487] type=1400 audit(1305234253.723:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=778 comm="apparmor_parser"
[   27.899834] type=1400 audit(1305234253.791:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[   27.910192] type=1400 audit(1305234253.803:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[   27.910755] type=1400 audit(1305234253.803:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=794 comm="apparmor_parser"
[   27.948113] type=1400 audit(1305234253.843:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=797 comm="apparmor_parser"
[   27.975112] type=1400 audit(1305234253.867:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=797 comm="apparmor_parser"
[   27.997565] type=1400 audit(1305234253.891:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=797 comm="apparmor_parser"
[   28.026468] type=1400 audit(1305234253.919:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=804 comm="apparmor_parser"
[   28.032728] type=1400 audit(1305234253.927:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=804 comm="apparmor_parser"
[   28.042812] type=1400 audit(1305234253.935:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=805 comm="apparmor_parser"
[   28.043374] type=1400 audit(1305234253.935:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=805 comm="apparmor_parser"
[   28.053767] type=1400 audit(1305234253.947:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=806 comm="apparmor_parser"
[   28.172354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.197143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.200168] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   28.200407] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.548068] [drm] nouveau 0000:01:00.0: Load detected on output A
[   28.734093] [drm] nouveau 0000:01:00.0: Load detected on output A
[   30.308020] [drm] nouveau 0000:01:00.0: Load detected on output A
[   30.460016] [drm] nouveau 0000:01:00.0: Load detected on output A
[   31.548056] [drm] nouveau 0000:01:00.0: Load detected on output A
[   32.064054] [drm] nouveau 0000:01:00.0: Load detected on output A
[   37.528483] wlan0: authenticate with 00:aa:ab:01:3e:5d (try 1)
[   37.530154] wlan0: authenticated
[   37.530194] wlan0: associate with 00:aa:ab:01:3e:5d (try 1)
[   37.531984] wlan0: RX AssocResp from 00:aa:ab:01:3e:5d (capab=0x401 status=0 aid=4)
[   37.531990] wlan0: associated
[   37.533094] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.776037] eth0: no IPv6 routers present
[   48.000014] wlan0: no IPv6 routers present
[  689.032093] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[  750.318011] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 1796.028029] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1796.237550] usbcore: registered new interface driver uas
[ 1796.261393] Initializing USB Mass Storage driver...
[ 1796.261580] scsi2 : usb-storage 1-2:1.0
[ 1796.263190] usbcore: registered new interface driver usb-storage
[ 1796.263197] USB Mass Storage support registered.
[ 1797.269950] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Contour   4.08 PQ: 0 ANSI: 2
[ 1797.270434] scsi 2:0:0:1: CD-ROM            SanDisk  Cruzer Contour   4.08 PQ: 0 ANSI: 2
[ 1797.276480] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 1797.278344] sd 2:0:0:0: [sdc] 32063117 512-byte logical blocks: (16.4 GB/15.2 GiB)
[ 1797.279956] sd 2:0:0:0: [sdc] Write Protect is off
[ 1797.279964] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 1797.280576] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 1797.280837] sr 2:0:0:1: Attached scsi CD-ROM sr1
[ 1797.280984] sr 2:0:0:1: Attached scsi generic sg4 type 5
[ 1797.282307] sd 2:0:0:0: [sdc] No Caching mode page present
[ 1797.282315] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 1797.286561] sd 2:0:0:0: [sdc] No Caching mode page present
[ 1797.286568] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 1797.288097]  sdc: sdc1
[ 1797.290801] sd 2:0:0:0: [sdc] No Caching mode page present
[ 1797.290808] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 1797.290813] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 1813.367545] exe (1729): /proc/1729/oom_adj is deprecated, please use /proc/1729/oom_score_adj instead.

[fri.K]

No w tym lsusb wykryło flash-a

Kod: Zaznacz cały

Bus 001 Device 003: ID 0781:540e SanDisk Corp. Cruzer Contour Flash Drive

choć może martwić

Kod: Zaznacz cały

[ 1797.270434] scsi 2:0:0:1: CD-ROM            SanDisk  Cruzer Contour   4.08 PQ: 0 ANSI: 2

Mówisz że fdisk wykrywa sdc1, no to zróbmy:

Kod: Zaznacz cały

sudo mount /dev/sdc1 /mnt

Kod: Zaznacz cały

ll /mnt

Jaki wynik?
Z jakiego środowiska korzystasz, unity?

[Max74]

Witam. Wypluło mi:

Kod: Zaznacz cały

rafal@rafal-desktop:~$ sudo mount /dev/sdc1 /mnt
[sudo] password for rafal: 
rafal@rafal-desktop:~$ ll /mnt
razem 2180
drwxr-xr-x  7 root root   65536 1970-01-01 01:00 ./
drwxr-xr-x 23 root root    4096 2011-05-04 14:04 ../
-rwxr-xr-x  1 root root      51 2011-01-30 16:51 autorun.inf*
-rwxr-xr-x  1 root root  140471 2010-12-13 20:57 bookmarks.html*
-rwxr-xr-x  1 root root   19166 2011-03-30 01:57 BOOTEX.LOG*
drwxr-xr-x 12 root root   65536 2011-05-05 00:20 Documents/
drwxr-xr-x  2 root root   65536 2011-03-30 01:57 FOUND.000/
-rwxr-xr-x  1 root root    5518 2010-12-19 17:14 icalout.ics*
-r-xr-xr-x  1 root root 1336632 2007-10-23 09:45 LaunchU3.exe*
drwxr-xr-x  3 root root   65536 2007-12-31 10:35 System/
drwxr-xr-x  4 root root   65536 2011-03-06 14:25 .Trash-1000/
drwxr-xr-x  4 root root   65536 2011-01-23 20:00 .Trash-1001/
-rwxr-xr-x  1 root root    1841 2010-12-19 17:14 vcalout.vcs*
rafal@rafal-desktop:~$ 

Co do środowiska, Xubuntu 11.04, środowisko xfce.

Dodam jeszcze, że płytki DVD też nie chce czytać. Wypala normalnie, ale po włożeniu nagranej płytki, efekt jest taki sam, jak w przypadku pendraka. Amba... zero ikony na pulpicie, w katalogu domowym, nigdzie... :/
I jeszcze jedno mi się przypomniało. To, że pendrive jest widziany też jako CD raczej nie jest niczym dziwnym. Ma U3 i po włożeniu do portu USB wszędzie widać go jako dwa nośniki: normalny pendrive, oraz CD.

[fri.K]

Ale masz dziwne rzeczy na pendrivie
Otwórz thunar -> Edycja -> Preferencje -> Zaawansowane
Masz mieć "tick" przy Zarządzanie wolumenami i urządzeniami
Teraz klik na "konfiguruj" i co masz tutaj pozaznaczane?

Z naszego eksperymentu wyszło że pendrive jest widoczny, można go ręcznie zamontować i przeglądać ale nie jest automatycznie montowany. Jakbyś mógł, spróbuj opróżnić pendrive na czas testów, bo ten autorun mnie niepokoi.

[Max74]

Tego pendrive nie moge opróżnić bo wywale system z niego, a tego nie chce. Moge innego podłaczyc i sprawdzic.
W zaawansowanych nie mam polecenia "tick". Przy zarządzaniu wolumenami ma tylko "włączenie" i jest ono zaptaszone
Co do konfiguracji, praktycznie wszystko jest zaznaczone. Odptaszyłem tylko "Automatyczne uruchomianie programów na nośnikach wymiennych".
Podłączyłem innego pendrive. Wyniki poleceń:

lsusb:

Kod: Zaznacz cały

Bus 004 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0ff9:1003  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

i dmesg:

Kod: Zaznacz cały

rafal@rafal-desktop:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-9-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #43-Ubuntu SMP Thu Apr 28 15:25:15 UTC 2011 (Ubuntu 2.6.38-9.43-generic 2.6.38.4)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:    /8GE667P , BIOS 6.00 PG 09/13/2002
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f4d40] f4d40
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 36780000 - 373b8000
[    0.000000] ACPI: RSDP 000f6910 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 3fff3000 0002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 3fff3040 00074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 3fff30c0 03890 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 3fff0000 00040
[    0.000000] ACPI: APIC 3fff6980 00068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map f5f80200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34530 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u2097152
[    0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-9-generic root=UUID=2da3c14a-4cb7-422a-8e77-66b6e4c45396 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5242240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1011940k/1048512k available (5189k kernel code, 36120k reserved, 2539k data, 700k init, 139208k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc15116e1 - 0xc178c4c0   (2539 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15116e1   (5189 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2545.437 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5090.87 BogoMIPS (lpj=10181748)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004050] Security Framework initialized
[    0.004088] AppArmor: AppArmor initialized
[    0.004092] Yama: becoming mindful.
[    0.004186] Mount-cache hash table entries: 512
[    0.004434] Initializing cgroup subsys ns
[    0.004440] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.004446] Initializing cgroup subsys cpuacct
[    0.004454] Initializing cgroup subsys memory
[    0.004469] Initializing cgroup subsys devices
[    0.004473] Initializing cgroup subsys freezer
[    0.004477] Initializing cgroup subsys net_cls
[    0.004481] Initializing cgroup subsys blkio
[    0.004544] CPU0: Hyper-Threading is disabled
[    0.004550] mce: CPU supports 4 MCE banks
[    0.004565] CPU0: Thermal monitoring enabled (TM1)
[    0.005395] SMP alternatives: switching to UP code
[    0.018851] ACPI: Core revision 20110112
[    0.022767] ftrace: allocating 23641 entries in 47 pages
[    0.024124] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064864] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
[    0.068003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.068003] ... version:                0
[    0.068003] ... bit width:              40
[    0.068003] ... generic registers:      18
[    0.068003] ... value mask:             000000ffffffffff
[    0.068003] ... max period:             0000007fffffffff
[    0.068003] ... fixed-purpose events:   0
[    0.068003] ... event mask:             000000000003ffff
[    0.068003] Brought up 1 CPUs
[    0.068003] Total of 1 processors activated (5090.87 BogoMIPS).
[    0.068003] devtmpfs: initialized
[    0.068003] print_constraints: dummy: 
[    0.068003] Time: 21:46:29  Date: 05/14/11
[    0.068003] NET: Registered protocol family 16
[    0.068003] EISA bus registered
[    0.068003] ACPI: bus type pci registered
[    0.093053] PCI: PCI BIOS revision 2.10 entry at 0xfa4c0, last bus=2
[    0.093056] PCI: Using configuration type 1 for base access
[    0.094521] bio: create slab <bio-0> at 0
[    0.095456] ACPI: EC: Look up EC in DSDT
[    0.099374] ACPI: Interpreter enabled
[    0.099383] ACPI: (supports S0 S1 S4 S5)
[    0.099411] ACPI: Using IOAPIC for interrupt routing
[    0.104489] ACPI: No dock devices found.
[    0.104493] HEST: Table not found.
[    0.104499] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.104594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.104763] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.104768] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
[    0.104773] pci_root PNP0A03:00: host bridge window [io  0x40c0-0x4fff] (ignored)
[    0.104777] pci_root PNP0A03:00: host bridge window [io  0x5000-0xffff] (ignored)
[    0.104781] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.104785] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.104790] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.104811] pci 0000:00:00.0: [8086:2560] type 0 class 0x000600
[    0.104824] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.104892] pci 0000:00:01.0: [8086:2561] type 1 class 0x000604
[    0.104966] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[    0.105015] pci 0000:00:1d.0: reg 20: [io  0xb800-0xb81f]
[    0.105054] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[    0.105103] pci 0000:00:1d.1: reg 20: [io  0xb000-0xb01f]
[    0.105141] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[    0.105189] pci 0000:00:1d.2: reg 20: [io  0xb400-0xb41f]
[    0.105237] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[    0.105260] pci 0000:00:1d.7: reg 10: [mem 0xe2100000-0xe21003ff]
[    0.105340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.105347] pci 0000:00:1d.7: PME# disabled
[    0.105365] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.105413] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[    0.105418] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[    0.105421] * this clock source is slow. If you are sure your timer does not have
[    0.105423] * this bug, please use "acpi_pm_good" to disable the workaround
[    0.105495] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[    0.105502] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
[    0.105520] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[    0.105536] pci 0000:00:1f.1: reg 10: [io  0xbc00-0xbc07]
[    0.105548] pci 0000:00:1f.1: reg 14: [io  0xc000-0xc003]
[    0.105560] pci 0000:00:1f.1: reg 18: [io  0xc400-0xc407]
[    0.105573] pci 0000:00:1f.1: reg 1c: [io  0xc800-0xc803]
[    0.105585] pci 0000:00:1f.1: reg 20: [io  0xcc00-0xcc0f]
[    0.105597] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.105630] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[    0.105678] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    0.105735] pci 0000:01:00.0: [10de:0321] type 0 class 0x000300
[    0.105753] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
[    0.105763] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff pref]
[    0.105795] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.105851] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.105857] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.105862] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.105868] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.105900] pci 0000:02:02.0: [1102:0007] type 0 class 0x000401
[    0.105919] pci 0000:02:02.0: reg 10: [io  0xa000-0xa01f]
[    0.105984] pci 0000:02:02.0: supports D1 D2
[    0.106004] pci 0000:02:02.1: [1102:7005] type 0 class 0x000980
[    0.106021] pci 0000:02:02.1: reg 10: [io  0xa400-0xa407]
[    0.106085] pci 0000:02:02.1: supports D1 D2
[    0.106118] pci 0000:02:03.0: [168c:0013] type 0 class 0x000200
[    0.106137] pci 0000:02:03.0: reg 10: [mem 0xe2000000-0xe200ffff]
[    0.106227] pci 0000:02:08.0: [8086:103a] type 0 class 0x000200
[    0.106246] pci 0000:02:08.0: reg 10: [mem 0xe2010000-0xe2010fff]
[    0.106257] pci 0000:02:08.0: reg 14: [io  0xa800-0xa83f]
[    0.106313] pci 0000:02:08.0: supports D1 D2
[    0.106316] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.106322] pci 0000:02:08.0: PME# disabled
[    0.106362] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.106368] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.106374] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe20fffff]
[    0.106381] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.106385] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.106389] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.106404] pci_bus 0000:00: on NUMA node 0
[    0.106409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.106567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.121163] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.121246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.121327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.121406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.121486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.121566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.121648] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.121728] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.121903] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.121910] vgaarb: loaded
[    0.122248] SCSI subsystem initialized
[    0.122348] libata version 3.00 loaded.
[    0.122425] usbcore: registered new interface driver usbfs
[    0.122444] usbcore: registered new interface driver hub
[    0.122485] usbcore: registered new device driver usb
[    0.122658] wmi: Mapper loaded
[    0.122661] PCI: Using ACPI for IRQ routing
[    0.122668] PCI: pci_cache_line_size set to 64 bytes
[    0.122736] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.122741] reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
[    0.122885] NetLabel: Initializing
[    0.122889] NetLabel:  domain hash size = 128
[    0.122891] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.122907] NetLabel:  unlabeled traffic allowed by default
[    0.134091] AppArmor: AppArmor Filesystem Enabled
[    0.134148] pnp: PnP ACPI init
[    0.134179] ACPI: bus type pnp registered
[    0.134458] pnp 00:00: [mem 0x000d0000-0x000d7fff]
[    0.134463] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.134466] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.134469] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.134473] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
[    0.134476] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.134480] pnp 00:00: [mem 0x00100000-0x3ffeffff]
[    0.134483] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.134486] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.134490] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[    0.134493] pnp 00:00: [mem 0xfff00000-0xffffffff]
[    0.134496] pnp 00:00: [mem 0x000e0000-0x000effff]
[    0.134582] system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.134588] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.134593] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.134597] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.134602] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.134606] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.134610] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.134615] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.134619] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.134623] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.134627] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
[    0.134632] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
[    0.134638] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.134725] pnp 00:01: [bus 00-ff]
[    0.134729] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.134733] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.134737] pnp 00:01: [io  0x0d00-0x3fff window]
[    0.134740] pnp 00:01: [io  0x4000-0x40bf]
[    0.134743] pnp 00:01: [io  0x40c0-0x4fff window]
[    0.134747] pnp 00:01: [io  0x5000-0xffff window]
[    0.134750] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.134754] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.134758] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[    0.134822] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.135120] pnp 00:02: [io  0x0010-0x001f]
[    0.135124] pnp 00:02: [io  0x0022-0x003f]
[    0.135127] pnp 00:02: [io  0x0044-0x005f]
[    0.135131] pnp 00:02: [io  0x0062-0x0063]
[    0.135134] pnp 00:02: [io  0x0065-0x006f]
[    0.135141] pnp 00:02: [io  0x0074-0x007f]
[    0.135144] pnp 00:02: [io  0x0091-0x0093]
[    0.135147] pnp 00:02: [io  0x00a2-0x00bf]
[    0.135150] pnp 00:02: [io  0x00e0-0x00ef]
[    0.135153] pnp 00:02: [io  0x04d0-0x04d1]
[    0.135156] pnp 00:02: [io  0x0290-0x029f]
[    0.135159] pnp 00:02: [io  0x0800-0x0805]
[    0.135237] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.135242] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.135246] system 00:02: [io  0x0800-0x0805] has been reserved
[    0.135251] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135271] pnp 00:03: [dma 4]
[    0.135275] pnp 00:03: [io  0x0000-0x000f]
[    0.135278] pnp 00:03: [io  0x0080-0x0090]
[    0.135281] pnp 00:03: [io  0x0094-0x009f]
[    0.135284] pnp 00:03: [io  0x00c0-0x00df]
[    0.135328] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.135348] pnp 00:04: [io  0x0070-0x0073]
[    0.135367] pnp 00:04: [irq 8]
[    0.135413] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.135428] pnp 00:05: [io  0x0061]
[    0.135480] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.135496] pnp 00:06: [io  0x00f0-0x00ff]
[    0.135504] pnp 00:06: [irq 13]
[    0.135551] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.135735] pnp 00:07: [io  0x03f0-0x03f5]
[    0.135739] pnp 00:07: [io  0x03f7]
[    0.135746] pnp 00:07: [irq 6]
[    0.135749] pnp 00:07: [dma 2]
[    0.135822] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.136093] pnp 00:08: [io  0x03f8-0x03ff]
[    0.136101] pnp 00:08: [irq 4]
[    0.136192] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.136461] pnp 00:09: [io  0x02f8-0x02ff]
[    0.136468] pnp 00:09: [irq 3]
[    0.136558] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.136912] pnp 00:0a: [io  0x0378-0x037f]
[    0.136920] pnp 00:0a: [irq 7]
[    0.137000] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.137169] pnp 00:0b: [io  0x0060]
[    0.137173] pnp 00:0b: [io  0x0064]
[    0.137243] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137485] pnp 00:0c: [io  0x0330-0x0331]
[    0.137493] pnp 00:0c: [irq 10]
[    0.137566] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.137781] pnp 00:0d: [io  0x0201]
[    0.137844] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.137854] pnp: PnP ACPI: found 14 devices
[    0.137858] ACPI: ACPI bus type pnp unregistered
[    0.137865] PnPBIOS: Disabled by ACPI PNP
[    0.175261] Switching to clocksource acpi_pm
[    0.175320] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[    0.175329] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[    0.175336] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
[    0.175341] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.175344] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.175351] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.175357] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff pref]
[    0.175366] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.175371] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.175378] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe20fffff]
[    0.175384] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.175406] pci 0000:00:1e.0: setting latency timer to 64
[    0.175412] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.175416] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.175420] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.175424] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
[    0.175428] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.175432] pci_bus 0000:02: resource 1 [mem 0xe2000000-0xe20fffff]
[    0.175435] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.175439] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.175502] NET: Registered protocol family 2
[    0.175598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.175598] Switched to NOHz mode on CPU #0
[    0.175598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.175598] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.175598] TCP: Hash tables configured (established 131072 bind 65536)
[    0.175598] TCP reno registered
[    0.175598] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.175598] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.175598] NET: Registered protocol family 1
[    0.175598] pci 0000:01:00.0: Boot video device
[    0.175598] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.175598] PCI: CLS 32 bytes, default 64
[    0.175598] cpufreq-nforce2: No nForce2 chipset.
[    0.175650] audit: initializing netlink socket (disabled)
[    0.175669] type=2000 audit(1305409589.172:1): initialized
[    0.186414] Trying to unpack rootfs image as initramfs...
[    0.204476] highmem bounce pool size: 64 pages
[    0.204487] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.212415] VFS: Disk quotas dquot_6.5.2
[    0.212561] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.213678] fuse init (API version 7.16)
[    0.213821] msgmni has been set to 1704
[    0.220343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.220396] io scheduler noop registered
[    0.220399] io scheduler deadline registered
[    0.220427] io scheduler cfq registered (default)
[    0.220645] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.220682] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.220832] efifb: probing for efifb
[    0.220837] efifb: cannot reserve video memory at 0xa0000
[    0.220844] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 56k, total 64k
[    0.220848] efifb: mode is 640x350x1, linelength=80, pages=1
[    0.220850] efifb: scrolling: redraw
[    0.220854] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.221023] Console: switching to colour frame buffer device 80x43
[    0.221046] fb0: EFI VGA frame buffer device
[    0.221175] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.221185] ACPI: Power Button [PWRB]
[    0.221260] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.221269] ACPI: Sleep Button [SLPB]
[    0.221341] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.221347] ACPI: Power Button [PWRF]
[    0.221551] ACPI: acpi_idle registered with cpuidle
[    0.223323] ERST: Table is not found!
[    0.223523] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.243898] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.243949] isapnp: Scanning for PnP cards...
[    0.332474] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.378159] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.464969] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.484471] Linux agpgart interface v0.103
[    0.484604] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[    0.496205] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    0.498122] brd: module loaded
[    0.498986] loop: module loaded
[    0.499151] i2c-core: driver [adp5520] using legacy suspend method
[    0.499154] i2c-core: driver [adp5520] using legacy resume method
[    0.499328] ata_piix 0000:00:1f.1: version 2.13
[    0.499368] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.499435] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.548485] scsi0 : ata_piix
[    0.548724] scsi1 : ata_piix
[    0.549634] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xcc00 irq 14
[    0.549639] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xcc08 irq 15
[    0.550276] Fixed MDIO Bus: probed
[    0.550347] PPP generic driver version 2.4.2
[    0.550456] tun: Universal TUN/TAP device driver, 1.6
[    0.550459] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.550613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.550665] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.550690] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.550696] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.550765] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.554693] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.560617] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2100000
[    0.580463] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.580744] hub 1-0:1.0: USB hub found
[    0.580753] hub 1-0:1.0: 6 ports detected
[    0.580870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.580896] uhci_hcd: USB Universal Host Controller Interface driver
[    0.580996] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.581010] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.581015] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.581091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.581137] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[    0.581322] hub 2-0:1.0: USB hub found
[    0.581329] hub 2-0:1.0: 2 ports detected
[    0.581423] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.581437] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.581442] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.581501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.581540] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[    0.581720] hub 3-0:1.0: USB hub found
[    0.581728] hub 3-0:1.0: 2 ports detected
[    0.581813] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.581822] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.581827] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.581883] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.581918] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    0.582109] hub 4-0:1.0: USB hub found
[    0.582117] hub 4-0:1.0: 2 ports detected
[    0.582298] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.589052] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.589073] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.589355] mousedev: PS/2 mouse device common for all mice
[    0.589598] rtc_cmos 00:04: RTC can wake from S4
[    0.589673] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.589700] rtc0: alarms up to one month, 242 bytes nvram
[    0.589857] device-mapper: uevent: version 1.0.3
[    0.589985] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.596547] device-mapper: multipath: version 1.2.0 loaded
[    0.596555] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.596754] EISA: Probing bus 0 at eisa.0
[    0.596776] Cannot allocate resource for EISA slot 4
[    0.596780] Cannot allocate resource for EISA slot 5
[    0.596794] EISA: Detected 0 cards.
[    0.596888] cpuidle: using governor ladder
[    0.596892] cpuidle: using governor menu
[    0.597262] TCP cubic registered
[    0.597452] NET: Registered protocol family 10
[    0.598274] NET: Registered protocol family 17
[    0.598315] Registering the dns_resolver key type
[    0.598378] Using IPI No-Shortcut mode
[    0.598563] PM: Hibernation image not present or could not be loaded.
[    0.598582] registered taskstats version 1
[    0.598789]   Magic number: 11:509:803
[    0.598907] rtc_cmos 00:04: setting system clock to 2011-05-14 21:46:30 UTC (1305409590)
[    0.598912] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.598915] EDD information not available.
[    0.796228] ata2.00: ATA-5: ST360021A, 3.19, max UDMA/100
[    0.796234] ata2.00: 117231408 sectors, multi 16: LBA 
[    0.860388] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22LP20, 2.00, max UDMA/66
[    0.876304] ata1.00: configured for UDMA/66
[    0.884101] ata2.01: HPA detected: current 66055248, native 78242976
[    0.884114] ata2.01: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/100
[    0.884118] ata2.01: 66055248 sectors, multi 16: LBA48 
[    0.931626] isapnp: No Plug & Play device found
[    0.972864] ata2.00: configured for UDMA/100
[    0.973758] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22LP20 2.00 PQ: 0 ANSI: 5
[    0.976625] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.976633] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.976839] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.976960] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.980388] ata2.01: configured for UDMA/100
[    0.980578] scsi 1:0:0:0: Direct-Access     ATA      ST360021A        3.19 PQ: 0 ANSI: 5
[    0.980868] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.981033] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    0.981121] sd 1:0:0:0: [sda] Write Protect is off
[    0.981126] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.981164] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.999738] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
[    1.000094] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    1.017027] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[    1.046098]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.046644] sd 1:0:1:0: [sdb] Write Protect is off
[    1.046650] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.046687] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.078660] Freeing initrd memory: 12512k freed
[    1.099073]  sdb: sdb1 < sdb5 sdb6 sdb7 >
[    1.099356] sdb: p7 size 58593280 extends beyond EOD, enabling native capacity
[    1.099512] ata2: soft resetting link
[    1.104047] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    1.184031] Refined TSC clocksource calibration: 2545.568 MHz.
[    1.184037] Switching to clocksource tsc
[    1.268280] ata2.01: n_sectors mismatch 66055248 != 78242976
[    1.268284] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[    1.284317] ata2.00: configured for UDMA/100
[    1.292263] ata2.01: configured for UDMA/100
[    1.292272] ata2: EH complete
[    1.292418] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.292559] sda: detected capacity change from 0 to 60022480896
[    1.292610] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    1.293024] sdb: detected capacity change from 33820286976 to 40060403712
[    1.337497]  sdb: sdb1 < sdb5 sdb6 sdb7 >
[    1.337964] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.338008] Freeing unused kernel memory: 700k freed
[    1.338890] Write protecting the kernel text: 5192k
[    1.338932] Write protecting the kernel read-only data: 2148k
[    1.340887] sda: detected capacity change from 0 to 60022480896
[    1.341032] sdb: detected capacity change from 0 to 40060403712
[    1.385132] <30>udev[66]: starting version 167
[    1.667778] Floppy drive(s): fd0 is 1.44M
[    1.751689] FDC 0 is a post-1991 82077
[    1.767540] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.767545] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.767614] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.833778] e100 0000:02:08.0: PME# disabled
[    1.834520] e100 0000:02:08.0: eth0: addr 0xe2010000, irq 20, MAC addr 00:20:ed:6c:20:d1
[    1.941343] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
[    1.941641] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    1.976569] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input4
[    1.977676] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    1.978353] usbcore: registered new interface driver usbhid
[    1.978359] usbhid: USB HID core driver
[    2.531846] EXT3-fs: barriers not enabled
[    2.546473] kjournald starting.  Commit interval 5 seconds
[    2.546510] EXT3-fs (sdb6): mounted filesystem with ordered data mode
[   21.009077] Adding 1464316k swap on /dev/sdb5.  Priority:-1 extents:1 across:1464316k 
[   21.128338] <30>udev[277]: starting version 167
[   21.202024] lp: driver loaded but no devices found
[   21.520342] EXT3-fs (sdb6): using internal journal
[   21.970994] intel_rng: FWH not detected
[   22.012064] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 890kHz
[   22.026880] parport_pc 00:0a: reported by Plug and Play ACPI
[   22.026925] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   22.027570] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.086896] EXT3-fs: barriers not enabled
[   22.092469] kjournald starting.  Commit interval 5 seconds
[   22.092745] EXT3-fs (sdb7): using internal journal
[   22.092752] EXT3-fs (sdb7): mounted filesystem with ordered data mode
[   22.195886] lp0: using parport0 (interrupt-driven).
[   22.317322] gameport gameport1: EMU10K1 is pci0000:02:02.1/gameport0, io 0xa400, speed 1125kHz
[   22.792282] cfg80211: Calling CRDA to update world regulatory domain
[   23.012055] ppdev: user-space parallel port driver
[   23.028342] cfg80211: World regulatory domain updated:
[   23.028347] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.028355] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.028361] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.028367] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.028373] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.028379] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.109446] ath5k 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   23.109522] ath5k 0000:02:03.0: registered as 'phy0'
[   23.714439] ath: EEPROM regdomain: 0x30
[   23.714444] ath: EEPROM indicates we should expect a direct regpair map
[   23.714449] ath: Country alpha2 being used: AM
[   23.714451] ath: Regpair used: 0x30
[   23.714457] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   23.714462] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714466] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   23.714470] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714474] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   23.714478] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714482] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   23.714486] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714490] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   23.714494] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714498] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   23.714502] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714506] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   23.714510] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714514] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   23.714518] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714522] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   23.714526] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714530] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   23.714534] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714538] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   23.714542] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.714546] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   23.714550] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   23.714554] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   23.726225] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   23.726232] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726236] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   23.726241] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726244] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   23.726249] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726252] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   23.726257] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726260] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   23.726265] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726268] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   23.726272] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726276] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   23.726280] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726284] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   23.726288] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726292] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   23.726296] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726300] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   23.726304] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726308] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   23.726312] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726316] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   23.726320] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726324] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   23.726328] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.726332] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   23.726336] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   23.772110] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.793686] cfg80211: Calling CRDA for country: AM
[   23.805320] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[   23.888467] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   23.888475] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888479] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   23.888483] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888487] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   23.888491] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888495] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   23.888499] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888502] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   23.888507] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888510] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   23.888514] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888518] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   23.888522] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888526] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   23.888530] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888533] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   23.888538] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888541] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   23.888545] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888549] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   23.888553] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888556] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   23.888560] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888564] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   23.888568] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   23.888571] cfg80211: Disabling freq 2484 MHz
[   23.888577] cfg80211: Regulatory domain changed to country: AM
[   23.888580] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.888584] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.888588] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   23.888592] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   23.953546] CA0106 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   23.953590] snd-ca0106: Model 1002 Rev 00000000 Serial 10021102
[   23.961765] type=1400 audit(1305402413.859:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
[   23.963677] type=1400 audit(1305402413.859:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=604 comm="apparmor_parser"
[   23.966005] type=1400 audit(1305402413.863:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=529 comm="apparmor_parser"
[   23.966942] type=1400 audit(1305402413.863:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[   23.967502] type=1400 audit(1305402413.863:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[   23.968634] type=1400 audit(1305402413.867:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"
[   23.969193] type=1400 audit(1305402413.867:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"
[   23.972844] type=1400 audit(1305402413.871:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=529 comm="apparmor_parser"
[   23.973434] type=1400 audit(1305402413.871:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=529 comm="apparmor_parser"
[   24.230422] [drm] Initialized drm 1.1.0 20060810
[   25.792074] Writing to ADC failed!
[   25.993238] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   26.002652] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034100a2)
[   26.002660] checking generic (a0000 e000) vs hw (d8000000 8000000)
[   26.002664] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[   26.002732] Console: switching to colour dummy device 80x25
[   26.005665] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   26.043664] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   26.043844] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   26.043848] [drm] nouveau 0000:01:00.0: BMP version 5.39
[   26.043852] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.22
[   26.043856] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[   26.043861] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8
[   26.043866] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 000088b8
[   26.043869] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 03010312 00000000
[   26.043873] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000033
[   26.043997] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   26.044011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEE7D
[   26.044048] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF081
[   26.044059] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF1C7
[   26.044097] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF34D
[   26.044103] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF36A
[   26.044109] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF387
[   26.078330] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF50B
[   26.314074] [drm] nouveau 0000:01:00.0: Detected monitoring device: max6646
[   26.314083] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[   26.314096] [drm] nouveau 0000:01:00.0: c: memory 648MHz core 324MHz
[   26.319795] [TTM] Zone  kernel: Available graphics memory: 442972 kiB.
[   26.319800] [TTM] Zone highmem: Available graphics memory: 512576 kiB.
[   26.319803] [TTM] Initializing pool allocator.
[   26.319828] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
[   26.320186] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   26.320209] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   26.320242] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[   26.320270] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[   26.328800] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.328808] [drm] No driver support for vblank timestamp query.
[   26.338811] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   26.338838] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[   26.338851] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[   26.338858] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   26.404023] [drm] nouveau 0000:01:00.0: Load detected on output A
[   26.468678] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ef7d1e00
[   26.480979] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   26.480986] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[   26.481205] Console: switching to colour frame buffer device 128x48
[   26.482397] fb0: nouveaufb frame buffer device
[   26.482400] drm: registered panic notifier
[   26.482542] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   27.223496] type=1400 audit(1305402417.119:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=768 comm="apparmor_parser"
[   27.774321] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.809157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.812170] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   27.812443] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.553290] [drm] nouveau 0000:01:00.0: Load detected on output A
[   28.736056] [drm] nouveau 0000:01:00.0: Load detected on output A
[   31.336028] [drm] nouveau 0000:01:00.0: Load detected on output A
[   31.508030] [drm] nouveau 0000:01:00.0: Load detected on output A
[   32.740139] [drm] nouveau 0000:01:00.0: Load detected on output A
[   33.276058] [drm] nouveau 0000:01:00.0: Load detected on output A
[   38.424034] eth0: no IPv6 routers present
[   39.631865] wlan0: authenticate with 00:aa:ab:01:3e:5d (try 1)
[   39.633291] wlan0: authenticated
[   39.633332] wlan0: associate with 00:aa:ab:01:3e:5d (try 1)
[   39.635531] wlan0: RX AssocResp from 00:aa:ab:01:3e:5d (capab=0x401 status=0 aid=6)
[   39.635537] wlan0: associated
[   39.636681] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.792026] wlan0: no IPv6 routers present
[  106.857778] exe (1618): /proc/1618/oom_adj is deprecated, please use /proc/1618/oom_score_adj instead.
[  114.680045] usb 1-2: new high speed USB device using ehci_hcd and address 3
[  114.883778] usbcore: registered new interface driver uas
[  115.072193] Initializing USB Mass Storage driver...
[  115.075518] scsi2 : usb-storage 1-2:1.0
[  115.083518] usbcore: registered new interface driver usb-storage
[  115.083525] USB Mass Storage support registered.
[  116.092673] scsi 2:0:0:0: Direct-Access     GH       PicoR            1.01 PQ: 0 ANSI: 2
[  116.104526] sd 2:0:0:0: Attached scsi generic sg3 type 0
[  116.106067] sd 2:0:0:0: [sdc] 4062656 512-byte logical blocks: (2.08 GB/1.93 GiB)
[  116.106669] sd 2:0:0:0: [sdc] Write Protect is off
[  116.106676] sd 2:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[  116.216053] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  116.464044] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  116.712084] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  116.960055] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  117.208077] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  117.456046] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  117.588679] sd 2:0:0:0: [sdc] Asking for cache data failed
[  117.588687] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[  117.704048] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  117.952071] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  118.200054] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  118.449061] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  118.696049] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  118.944051] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  119.076812] sd 2:0:0:0: [sdc] Asking for cache data failed
[  119.076821] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[  119.083283]  sdc: sdc1
[  119.196401] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  119.444051] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  119.712067] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  119.961136] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  120.208050] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  120.456050] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[  120.588814] sd 2:0:0:0: [sdc] Asking for cache data failed
[  120.588822] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[  120.588828] sd 2:0:0:0: [sdc] Attached SCSI removable disk

Co do autorun'u, wynika z platformy U3. Działa generalnie tylko pod Windowsem, choć widziałem gdzieś aplikację pod linuxa.